[Gelöst] eigene Selberschuld.... VDR lässt sich nur noch manuell starten und andere Probleme...

Morpheus1607 · 1. Januar 2014

Hallo liebe VDR Gemeinde und ein frohes neues Jahr erstmal.

Ich hatte vor ein paar Tagen ein Dist-Upgrade gemacht, seitdem will das Frontend nicht mehr starten, nur noch mit dem Befehl vdr "-P"xineliboutput --local=none --remote=37890 --primary""

Die Syslog spuckt mir :
Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
rene kernel: [ 12.445444] init: vdr-frontend main process (1823) terminated with status 250
Jan 1 11:45:13 rene kernel: [ 12.445484] init: vdr-frontend main process ended, respawning

und das dauerhaft. Nun gibt es im Internet viele Lösungsansätze, desweiteren ist es auch so das einige Einträge in der var/lib/vdr/setup.conf doppelt vorhanden sind.

Desweiteren werden keine Plugins mehr geladen, im Einstellungsmenü steht nur noch xinlibout drin...

Wo soll ich anfangen zu suchen bzw. wie kann ich das problem lösen???

System steht in der Signatur

seahawk1986 · 1. Januar 2014

Zitat von Morpheus1607

Wo soll ich anfangen zu suchen

Wie sieht das syslog beim Start aus und was steht in deiner /etc/vdr/plugins/order.conf?

Morpheus1607 · 1. Januar 2014

Auszu aus der order.conf

firstplugin
secondplugin
*lastplugin
-thirdplugin
-fourthplugin
*anotherlastplugin
*dynamite
dvbhddevice
dvbsddevice
-pvr350
-dummydevice
-xine
xineliboutput
-graphtft
-softhddevice
graphtftng
yaepghd

und die log

Jan 1 11:45:07 rene kernel: [ 0.938071] rtc_cmos 00:04: setting system clock to 2014-01-01 10:45:01 UTC (1388573101)
Jan 1 11:45:07 rene kernel: [ 0.938571] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jan 1 11:45:07 rene kernel: [ 0.938573] EDD information not available.
Jan 1 11:45:07 rene kernel: [ 1.084434] ata1.00: HPA detected: current 488390959, native 488397168
Jan 1 11:45:07 rene kernel: [ 1.084440] ata1.00: ATA-7: SAMSUNG SP2514N, VF100-33, max UDMA/100
Jan 1 11:45:07 rene kernel: [ 1.084444] ata1.00: 488390959 sectors, multi 16: LBA48
Jan 1 11:45:07 rene kernel: [ 1.088443] ata4.01: ATA-8: Hitachi HDS721010CLA330, JP4OA3MA, max UDMA/133
Jan 1 11:45:07 rene kernel: [ 1.088448] ata4.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jan 1 11:45:07 rene kernel: [ 1.092329] ata1.00: configured for UDMA/100
Jan 1 11:45:07 rene kernel: [ 1.092488] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5
Jan 1 11:45:07 rene kernel: [ 1.092649] sd 0:0:0:0: [sda] 488390959 512-byte logical blocks: (250 GB/232 GiB)
Jan 1 11:45:07 rene kernel: [ 1.092688] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 11:45:07 rene kernel: [ 1.092725] sd 0:0:0:0: [sda] Write Protect is off
Jan 1 11:45:07 rene kernel: [ 1.092730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 1 11:45:07 rene kernel: [ 1.092769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 11:45:07 rene kernel: [ 1.096318] ata3.00: ATA-8: CSSD-V60GB2, 1.0, max UDMA/100
Jan 1 11:45:07 rene kernel: [ 1.096321] ata3.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jan 1 11:45:07 rene kernel: [ 1.096544] ata3.01: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
Jan 1 11:45:07 rene kernel: [ 1.096548] ata3.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jan 1 11:45:07 rene kernel: [ 1.102261] sda: sda1
Jan 1 11:45:07 rene kernel: [ 1.102581] sd 0:0:0:0: [sda] Attached SCSI disk
Jan 1 11:45:07 rene kernel: [ 1.104429] ata4.01: configured for UDMA/133
Jan 1 11:45:07 rene kernel: [ 1.112293] ata3.00: configured for UDMA/100
Jan 1 11:45:07 rene kernel: [ 1.128365] ata3.01: configured for UDMA/133
Jan 1 11:45:07 rene kernel: [ 1.128470] scsi 2:0:0:0: Direct-Access ATA CSSD-V60GB2 1.0 PQ: 0 ANSI: 5
Jan 1 11:45:07 rene kernel: [ 1.128615] sd 2:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
Jan 1 11:45:07 rene kernel: [ 1.128644] sd 2:0:0:0: Attached scsi generic sg1 type 0
Jan 1 11:45:07 rene kernel: [ 1.128716] sd 2:0:0:0: [sdb] Write Protect is off
Jan 1 11:45:07 rene kernel: [ 1.128720] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan 1 11:45:07 rene kernel: [ 1.128767] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 11:45:07 rene kernel: [ 1.128822] scsi 2:0:1:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
Jan 1 11:45:07 rene kernel: [ 1.128917] sd 2:0:1:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Jan 1 11:45:07 rene kernel: [ 1.128982] sd 2:0:1:0: Attached scsi generic sg2 type 0
Jan 1 11:45:07 rene kernel: [ 1.128986] sd 2:0:1:0: [sdc] Write Protect is off
Jan 1 11:45:07 rene kernel: [ 1.128989] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
Jan 1 11:45:07 rene kernel: [ 1.129011] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 11:45:07 rene kernel: [ 1.129073] scsi 3:0:1:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
Jan 1 11:45:07 rene kernel: [ 1.129204] sd 3:0:1:0: Attached scsi generic sg3 type 0
Jan 1 11:45:07 rene kernel: [ 1.129292] sd 3:0:1:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Jan 1 11:45:07 rene kernel: [ 1.129367] sd 3:0:1:0: [sdd] Write Protect is off
Jan 1 11:45:07 rene kernel: [ 1.129370] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
Jan 1 11:45:07 rene kernel: [ 1.129402] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 11:45:07 rene kernel: [ 1.141047] sdd: sdd1 < sdd5 >
Jan 1 11:45:07 rene kernel: [ 1.141389] sd 3:0:1:0: [sdd] Attached SCSI disk
Jan 1 11:45:07 rene kernel: [ 1.142860] sdc: sdc1 < sdc5 >
Jan 1 11:45:07 rene kernel: [ 1.143552] sdb: sdb1 sdb2 < sdb5 >
Jan 1 11:45:07 rene kernel: [ 1.143624] sd 2:0:1:0: [sdc] Attached SCSI disk
Jan 1 11:45:07 rene kernel: [ 1.143944] sd 2:0:0:0: [sdb] Attached SCSI disk
Jan 1 11:45:07 rene kernel: [ 1.145500] Freeing unused kernel memory: 924k freed
Jan 1 11:45:07 rene kernel: [ 1.145752] Write protecting the kernel read-only data: 12288k
Jan 1 11:45:07 rene kernel: [ 1.150874] Freeing unused kernel memory: 1588k freed
Jan 1 11:45:07 rene kernel: [ 1.155094] Freeing unused kernel memory: 1188k freed
Jan 1 11:45:07 rene kernel: [ 1.190452] vesafb: mode is 1024x768x32, linelength=4096, pages=0
Jan 1 11:45:07 rene kernel: [ 1.190455] vesafb: scrolling: redraw
Jan 1 11:45:07 rene kernel: [ 1.190458] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Jan 1 11:45:07 rene kernel: [ 1.192857] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90011100000, using 3072k, total 3072k
Jan 1 11:45:07 rene kernel: [ 1.192989] Console: switching to colour frame buffer device 128x48
Jan 1 11:45:07 rene kernel: [ 1.193007] fb0: VESA VGA frame buffer device
Jan 1 11:45:07 rene kernel: [ 1.246601] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 1 11:45:07 rene kernel: [ 1.246637] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
Jan 1 11:45:07 rene kernel: [ 1.246992] 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 1 11:45:07 rene kernel: [ 1.247019] 8139too 0000:02:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 1 11:45:07 rene kernel: [ 1.247901] 8139too 0000:02:03.0: eth0: RealTek RTL8139 at 0xee00, 00:1c:25:07:89:fc, IRQ 16
Jan 1 11:45:07 rene kernel: [ 1.248023] Refined TSC clocksource calibration: 2393.999 MHz.
Jan 1 11:45:07 rene kernel: [ 1.248028] Switching to clocksource tsc
Jan 1 11:45:07 rene kernel: [ 1.274534] Floppy drive(s): fd0 is 1.44M
Jan 1 11:45:07 rene kernel: [ 1.291670] FDC 0 is a post-1991 82077
Jan 1 11:45:07 rene kernel: [ 1.352120] usb 1-8: new high-speed USB device number 3 using ehci_hcd
Jan 1 11:45:07 rene kernel: [ 1.453470] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
Jan 1 11:45:07 rene kernel: [ 1.453474] EXT4-fs (sdb1): write access will be enabled during recovery
Jan 1 11:45:07 rene kernel: [ 1.728033] usb 3-2: new full-speed USB device number 2 using uhci_hcd
Jan 1 11:45:07 rene kernel: [ 1.826796] EXT4-fs (sdb1): orphan cleanup on readonly fs
Jan 1 11:45:07 rene kernel: [ 1.826803] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1836
Jan 1 11:45:07 rene kernel: [ 1.826829] EXT4-fs (sdb1): 1 orphan inode deleted
Jan 1 11:45:07 rene kernel: [ 1.826831] EXT4-fs (sdb1): recovery complete
Jan 1 11:45:07 rene kernel: [ 1.912802] hub 3-2:1.0: USB hub found
Jan 1 11:45:07 rene kernel: [ 1.914757] hub 3-2:1.0: 3 ports detected
Jan 1 11:45:07 rene kernel: [ 2.193764] usb 3-2.2: new full-speed USB device number 3 using uhci_hcd
Jan 1 11:45:07 rene kernel: [ 2.361090] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.0/input/input2
Jan 1 11:45:07 rene kernel: [ 2.361189] generic-usb 0003:046D:C71E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.2/input0
Jan 1 11:45:07 rene kernel: [ 2.361202] usbcore: registered new interface driver usbhid
Jan 1 11:45:07 rene kernel: [ 2.361204] usbhid: USB HID core driver
Jan 1 11:45:07 rene kernel: [ 2.425774] usb 3-2.3: new full-speed USB device number 4 using uhci_hcd
Jan 1 11:45:07 rene kernel: [ 2.595729] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.3/3-2.3:1.0/input/input3
Jan 1 11:45:07 rene kernel: [ 2.596286] logitech 0003:046D:C71F.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-2.3/input0
Jan 1 11:45:07 rene kernel: [ 2.713054] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Jan 1 11:45:07 rene kernel: [ 4.562979] Adding 7405928k swap on /dev/sdb5. Priority:-1 extents:1 across:7405928k SS
Jan 1 11:45:07 rene kernel: [ 4.580495] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 1 11:45:07 rene kernel: [ 4.600211] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
Jan 1 11:45:07 rene kernel: [ 5.170190] parport_pc 00:0a: reported by Plug and Play ACPI
Jan 1 11:45:07 rene kernel: [ 5.170235] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Jan 1 11:45:07 rene kernel: [ 5.215181] intel_rng: FWH not detected
Jan 1 11:45:07 rene kernel: [ 5.219308] lp: driver loaded but no devices found
Jan 1 11:45:07 rene kernel: [ 5.256185] lp0: using parport0 (interrupt-driven).
Jan 1 11:45:07 rene kernel: [ 5.268850] IR NEC protocol handler initialized
Jan 1 11:45:07 rene kernel: [ 5.279793] ppdev: user-space parallel port driver
Jan 1 11:45:07 rene kernel: [ 5.290393] IR RC5(x) protocol handler initialized
Jan 1 11:45:07 rene kernel: [ 5.292607] leds_ss4200: no LED devices found
Jan 1 11:45:07 rene kernel: [ 5.317586] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Jan 1 11:45:07 rene kernel: [ 5.318215] SGI XFS Quota Management subsystem
Jan 1 11:45:07 rene kernel: [ 5.319928] XFS (sdc5): Mounting Filesystem
Jan 1 11:45:07 rene kernel: [ 5.432249] IR RC6 protocol handler initialized
Jan 1 11:45:07 rene kernel: [ 5.441757] IR JVC protocol handler initialized
Jan 1 11:45:07 rene kernel: [ 5.444677] IR Sony protocol handler initialized
Jan 1 11:45:07 rene kernel: [ 5.450101] IR MCE Keyboard/mouse protocol handler initialized
Jan 1 11:45:07 rene kernel: [ 5.462026] lirc_dev: IR Remote Control driver registered, major 250
Jan 1 11:45:07 rene kernel: [ 5.462695] IR LIRC bridge handler initialized
Jan 1 11:45:07 rene kernel: [ 5.540580] Mantis 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jan 1 11:45:07 rene kernel: [ 5.540588] Mantis 0000:02:01.0: setting latency timer to 64
Jan 1 11:45:07 rene kernel: [ 5.542069] DVB: registering new adapter (Mantis DVB adapter)
Jan 1 11:45:07 rene kernel: [ 5.568754] rtl8188eu driver version=v4.1.2_4787.20120803
Jan 1 11:45:07 rene kernel: [ 5.568758] build time: Dec 7 2013 22:38:38
Jan 1 11:45:07 rene kernel: [ 5.568795] register rtw_netdev_ops to netdev_ops
Jan 1 11:45:07 rene kernel: [ 5.568798] CHIP TYPE: RTL8188E
Jan 1 11:45:07 rene kernel: [ 5.568803]
Jan 1 11:45:07 rene kernel: [ 5.568803] usb_endpoint_descriptor(0):
Jan 1 11:45:07 rene kernel: [ 5.568805] bLength=7
Jan 1 11:45:07 rene kernel: [ 5.568806] bDescriptorType=5
Jan 1 11:45:07 rene kernel: [ 5.568807] bEndpointAddress=81
Jan 1 11:45:07 rene kernel: [ 5.568809] wMaxPacketSize=512
Jan 1 11:45:07 rene kernel: [ 5.568810] bInterval=0
Jan 1 11:45:07 rene kernel: [ 5.568811] RT_usb_endpoint_is_bulk_in = 1
Jan 1 11:45:07 rene kernel: [ 5.568812]
Jan 1 11:45:07 rene kernel: [ 5.568813] usb_endpoint_descriptor(1):
Jan 1 11:45:07 rene kernel: [ 5.568814] bLength=7
Jan 1 11:45:07 rene kernel: [ 5.568815] bDescriptorType=5
Jan 1 11:45:07 rene kernel: [ 5.568817] bEndpointAddress=2
Jan 1 11:45:07 rene kernel: [ 5.568818] wMaxPacketSize=512
Jan 1 11:45:07 rene kernel: [ 5.568819] bInterval=0
Jan 1 11:45:07 rene kernel: [ 5.568820] RT_usb_endpoint_is_bulk_out = 2
Jan 1 11:45:07 rene kernel: [ 5.568822]
Jan 1 11:45:07 rene kernel: [ 5.568822] usb_endpoint_descriptor(2):
Jan 1 11:45:07 rene kernel: [ 5.568823] bLength=7
Jan 1 11:45:07 rene kernel: [ 5.568824] bDescriptorType=5
Jan 1 11:45:07 rene kernel: [ 5.568826] bEndpointAddress=3
Jan 1 11:45:07 rene kernel: [ 5.568827] wMaxPacketSize=512
Jan 1 11:45:07 rene kernel: [ 5.568828] bInterval=0
Jan 1 11:45:07 rene kernel: [ 5.568829] RT_usb_endpoint_is_bulk_out = 3
Jan 1 11:45:07 rene kernel: [ 5.568831] nr_endpoint=3, in_num=1, out_num=2
Jan 1 11:45:07 rene kernel: [ 5.568832]
Jan 1 11:45:07 rene kernel: [ 5.568833] USB_SPEED_HIGH
Jan 1 11:45:07 rene kernel: [ 5.569906] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0)
Jan 1 11:45:07 rene kernel: [ 5.569912] RF_Type is 3!!
Jan 1 11:45:07 rene kernel: [ 5.569914] _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2)
Jan 1 11:45:07 rene kernel: [ 5.570030] EEPROM type is E-FUSE
Jan 1 11:45:07 rene kernel: [ 5.570032] ====> _ReadAdapterInfo8188EU
Jan 1 11:45:07 rene kernel: [ 5.570193] Boot from EFUSE, Autoload OK !
Jan 1 11:45:07 rene kernel: [ 5.694418] nvidia: module license 'NVIDIA' taints kernel.
Jan 1 11:45:07 rene kernel: [ 5.694422] Disabling lock debugging due to kernel taint
Jan 1 11:45:07 rene kernel: [ 5.726124] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 1 11:45:07 rene kernel: [ 5.726251] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
Jan 1 11:45:07 rene kernel: [ 5.726277] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Jan 1 11:45:07 rene kernel: [ 5.795708] hda_codec: ALC883: BIOS auto-probing.
Jan 1 11:45:07 rene kernel: [ 5.822146] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
Jan 1 11:45:07 rene kernel: [ 5.822341] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
Jan 1 11:45:07 rene kernel: [ 5.824387] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
Jan 1 11:45:07 rene kernel: [ 5.824570] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Jan 1 11:45:07 rene kernel: [ 5.824769] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Jan 1 11:45:07 rene kernel: [ 5.826000] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 1 11:45:07 rene kernel: [ 5.826004] hda_intel: Disabling MSI
Jan 1 11:45:07 rene kernel: [ 5.826032] snd_hda_intel 0000:01:00.1: setting latency timer to 64
Jan 1 11:45:07 rene kernel: [ 5.898169] EEPROM ID=0x8129
Jan 1 11:45:07 rene kernel: [ 5.898172] VID = 0x0BDA, PID = 0x8179
Jan 1 11:45:07 rene kernel: [ 5.898174] Customer ID: 0x00, SubCustomer ID: 0xCD
Jan 1 11:45:07 rene kernel: [ 5.898177] Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
Jan 1 11:45:07 rene kernel: [ 5.898179] ### PS params=> power_mgnt(0),usbss_enable(0) ###
Jan 1 11:45:07 rene kernel: [ 5.898182] ======= Path 0, Channel 0 =======
Jan 1 11:45:07 rene kernel: [ 5.898183] Index24G_CCK_Base[0][0] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898185] Index24G_BW40_Base[0][0] = 0x2c
Jan 1 11:45:07 rene kernel: [ 5.898186] ======= Path 0, Channel 1 =======
Jan 1 11:45:07 rene kernel: [ 5.898188] Index24G_CCK_Base[0][1] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898190] Index24G_BW40_Base[0][1] = 0x2c
Jan 1 11:45:07 rene kernel: [ 5.898191] ======= Path 0, Channel 2 =======
Jan 1 11:45:07 rene kernel: [ 5.898193] Index24G_CCK_Base[0][2] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898194] Index24G_BW40_Base[0][2] = 0x2c
Jan 1 11:45:07 rene kernel: [ 5.898196] ======= Path 0, Channel 3 =======
Jan 1 11:45:07 rene kernel: [ 5.898197] Index24G_CCK_Base[0][3] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898199] Index24G_BW40_Base[0][3] = 0x2c
Jan 1 11:45:07 rene kernel: [ 5.898200] ======= Path 0, Channel 4 =======
Jan 1 11:45:07 rene kernel: [ 5.898202] Index24G_CCK_Base[0][4] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898203] Index24G_BW40_Base[0][4] = 0x2c
Jan 1 11:45:07 rene kernel: [ 5.898205] ======= Path 0, Channel 5 =======
Jan 1 11:45:07 rene kernel: [ 5.898207] Index24G_CCK_Base[0][5] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898208] Index24G_BW40_Base[0][5] = 0x2c
Jan 1 11:45:07 rene kernel: [ 5.898210] ======= Path 0, Channel 6 =======
Jan 1 11:45:07 rene kernel: [ 5.898211] Index24G_CCK_Base[0][6] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898213] Index24G_BW40_Base[0][6] = 0x2b
Jan 1 11:45:07 rene kernel: [ 5.898214] ======= Path 0, Channel 7 =======
Jan 1 11:45:07 rene kernel: [ 5.898216] Index24G_CCK_Base[0][7] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898218] Index24G_BW40_Base[0][7] = 0x2b
Jan 1 11:45:07 rene kernel: [ 5.898219] ======= Path 0, Channel 8 =======
Jan 1 11:45:07 rene kernel: [ 5.898221] Index24G_CCK_Base[0][8] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898222] Index24G_BW40_Base[0][8] = 0x2b
Jan 1 11:45:07 rene kernel: [ 5.898224] ======= Path 0, Channel 9 =======
Jan 1 11:45:07 rene kernel: [ 5.898225] Index24G_CCK_Base[0][9] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898227] Index24G_BW40_Base[0][9] = 0x2b
Jan 1 11:45:07 rene kernel: [ 5.898228] ======= Path 0, Channel 10 =======
Jan 1 11:45:07 rene kernel: [ 5.898230] Index24G_CCK_Base[0][10] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898231] Index24G_BW40_Base[0][10] = 0x2b
Jan 1 11:45:07 rene kernel: [ 5.898233] ======= Path 0, Channel 11 =======
Jan 1 11:45:07 rene kernel: [ 5.898234] Index24G_CCK_Base[0][11] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898236] Index24G_BW40_Base[0][11] = 0x2b
Jan 1 11:45:07 rene kernel: [ 5.898238] ======= Path 0, Channel 12 =======
Jan 1 11:45:07 rene kernel: [ 5.898239] Index24G_CCK_Base[0][12] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898241] Index24G_BW40_Base[0][12] = 0x2b
Jan 1 11:45:07 rene kernel: [ 5.898242] ======= Path 0, Channel 13 =======
Jan 1 11:45:07 rene kernel: [ 5.898244] Index24G_CCK_Base[0][13] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898245] Index24G_BW40_Base[0][13] = 0x2b
Jan 1 11:45:07 rene kernel: [ 5.898247] ======= Path 0, Channel 14 =======
Jan 1 11:45:07 rene kernel: [ 5.898248] Index24G_CCK_Base[0][14] = 0x28
Jan 1 11:45:07 rene kernel: [ 5.898250] Index24G_BW40_Base[0][14] = 0x2b
Jan 1 11:45:07 rene kernel: [ 5.898251] ======= TxCount 0 =======
Jan 1 11:45:07 rene kernel: [ 5.898253] CCK_24G_Diff[0][0]= 0
Jan 1 11:45:07 rene kernel: [ 5.898254] OFDM_24G_Diff[0][0]= 1
Jan 1 11:45:07 rene kernel: [ 5.898256] BW20_24G_Diff[0][0]= -1
Jan 1 11:45:07 rene kernel: [ 5.898257] BW40_24G_Diff[0][0]= 0
Jan 1 11:45:07 rene kernel: [ 5.898259] ======= TxCount 1 =======
Jan 1 11:45:07 rene kernel: [ 5.898260] CCK_24G_Diff[0][1]= -2
Jan 1 11:45:07 rene kernel: [ 5.898262] OFDM_24G_Diff[0][1]= -2
Jan 1 11:45:07 rene kernel: [ 5.898263] BW20_24G_Diff[0][1]= -2
Jan 1 11:45:07 rene kernel: [ 5.898265] BW40_24G_Diff[0][1]= -2
Jan 1 11:45:07 rene kernel: [ 5.898266] ======= TxCount 2 =======
Jan 1 11:45:07 rene kernel: [ 5.898267] CCK_24G_Diff[0][2]= -2
Jan 1 11:45:07 rene kernel: [ 5.898269] OFDM_24G_Diff[0][2]= -2
Jan 1 11:45:07 rene kernel: [ 5.898270] BW20_24G_Diff[0][2]= -2
Jan 1 11:45:07 rene kernel: [ 5.898272] BW40_24G_Diff[0][2]= -2
Jan 1 11:45:07 rene kernel: [ 5.898273] ======= TxCount 3 =======
Jan 1 11:45:07 rene kernel: [ 5.898275] CCK_24G_Diff[0][3]= -2
Jan 1 11:45:07 rene kernel: [ 5.898276] OFDM_24G_Diff[0][3]= -2
Jan 1 11:45:07 rene kernel: [ 5.898278] BW20_24G_Diff[0][3]= -2
Jan 1 11:45:07 rene kernel: [ 5.898279] BW40_24G_Diff[0][3]= -2
Jan 1 11:45:07 rene kernel: [ 5.898281] EEPROMRegulatory = 0x0
Jan 1 11:45:07 rene kernel: [ 5.898282] mlmepriv.ChannelPlan = 0x20
Jan 1 11:45:07 rene kernel: [ 5.898284] EEPROM Customer ID: 0x 0
Jan 1 11:45:07 rene kernel: [ 5.898285] EEPROM : AntDivCfg = 0, TRxAntDivType = 3
Jan 1 11:45:07 rene kernel: [ 5.898287] Board Type: 0x 0
Jan 1 11:45:07 rene kernel: [ 5.898288] ThermalMeter = 0x1a
Jan 1 11:45:07 rene kernel: [ 5.898290] <==== _ReadAdapterInfo8188EU in 328 ms
Jan 1 11:45:07 rene kernel: [ 5.898529] rtw_macaddr_cfg MAC Address = f8:1a:67:26:b7:bd
Jan 1 11:45:07 rene kernel: [ 5.898531] MAC Address from pnetdev->dev_addr= f8:1a:67:26:b7:bd
Jan 1 11:45:07 rene kernel: [ 5.899489] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
Jan 1 11:45:07 rene kernel: [ 5.900229] usbcore: registered new interface driver rtl8188eu
Jan 1 11:45:07 rene kernel: [ 6.009413] XFS (sdc5): Starting recovery (logdev: internal)
Jan 1 11:45:07 rene kernel: [ 6.092710] +871x_drv - drv_open, bup=0
Jan 1 11:45:07 rene kernel: [ 6.140300] rtl8188e_FirmwareDownload: fw_ver=4 fw_subver=0 sig=0x88e1
Jan 1 11:45:07 rene kernel: [ 6.146875] XFS (sdc5): Ending recovery (logdev: internal)
Jan 1 11:45:07 rene kernel: [ 6.170302] _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00030004
Jan 1 11:45:07 rene kernel: [ 6.173427] _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000300c6
Jan 1 11:45:07 rene kernel: [ 6.173431] Set RF Chip ID to RF_6052 and RF type to 1T1R.
Jan 1 11:45:07 rene kernel: [ 6.209066] RPC: Registered named UNIX socket transport module.
Jan 1 11:45:07 rene kernel: [ 6.209071] RPC: Registered udp transport module.
Jan 1 11:45:07 rene kernel: [ 6.209072] RPC: Registered tcp transport module.
Jan 1 11:45:07 rene kernel: [ 6.209074] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 11:45:07 rene kernel: [ 6.219233] FS-Cache: Loaded
Jan 1 11:45:07 rene kernel: [ 6.249931] FS-Cache: Netfs 'nfs' registered for caching
Jan 1 11:45:07 rene kernel: [ 6.278982] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 11:45:07 rene kernel: [ 6.335172] init: mhddfs-vdr post-start process (951) terminated with status 32
Jan 1 11:45:07 rene kernel: [ 6.494072] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
Jan 1 11:45:07 rene kernel: [ 6.525272] [drm] Initialized drm 1.1.0 20060810
Jan 1 11:45:07 rene kernel: [ 6.527816] pDM_Odm TxPowerTrackControl = 1
Jan 1 11:45:07 rene kernel: [ 6.537712] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
Jan 1 11:45:07 rene kernel: [ 6.730072] MAC Address from REG_MACID = f8:1a:67:26:b7:bd
Jan 1 11:45:07 rene kernel: [ 6.730077] rtl8188eu_hal_init in 636ms
Jan 1 11:45:07 rene kernel: [ 6.730081] MAC Address = f8:1a:67:26:b7:bd
Jan 1 11:45:07 rene kernel: [ 6.732104] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
Jan 1 11:45:07 rene kernel: [ 6.734491] -871x_drv - drv_open, bup=1
Jan 1 11:45:07 rene kernel: [ 6.734985] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 1 11:45:07 rene kernel: [ 6.735003] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
Jan 1 11:45:07 rene kernel: [ 6.735015] set_mode = IW_MODE_INFRA
Jan 1 11:45:07 rene kernel: [ 6.737946] hw_var_set_opmode()-3434 mode = 2
Jan 1 11:45:07 rene kernel: [ 6.752160] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
Jan 1 11:45:07 rene kernel: [ 6.756074] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
Jan 1 11:45:07 rene kernel: [ 6.780038] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
Jan 1 11:45:07 rene ntpdate[1046]: Can't find host ntp.ubuntu.com: Name or service not known (-2)
Jan 1 11:45:07 rene ntpdate[1046]: no servers can be used, exiting
Jan 1 11:45:07 rene kernel: [ 6.804086] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
Jan 1 11:45:07 rene kernel: [ 6.804329] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
Jan 1 11:45:07 rene kernel: [ 6.804495] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
Jan 1 11:45:07 rene kernel: [ 6.804622] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
Jan 1 11:45:07 rene kernel: [ 6.804747] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
Jan 1 11:45:07 rene kernel: [ 6.805425] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 1 11:45:07 rene kernel: [ 6.805435] nvidia 0000:01:00.0: setting latency timer to 64
Jan 1 11:45:07 rene kernel: [ 6.805441] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Jan 1 11:45:07 rene kernel: [ 6.805586] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
Jan 1 11:45:08 rene kernel: [ 7.628840] NVRM: Your system is not currently configured to drive a VGA console
Jan 1 11:45:08 rene kernel: [ 7.628844] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
Jan 1 11:45:08 rene kernel: [ 7.628846] NVRM: requires the use of a text-mode VGA console. Use of other console
Jan 1 11:45:08 rene kernel: [ 7.628848] NVRM: drivers including, but not limited to, vesafb, may result in
Jan 1 11:45:08 rene kernel: [ 7.628850] NVRM: corruption and stability problems, and is not supported.
Jan 1 11:45:08 rene vdr: [1127] ERROR: can't access /srv/vdr/video.00
Jan 1 11:45:08 rene kernel: [ 8.128754] init: vdr main process (1127) terminated with status 2
Jan 1 11:45:08 rene dbus[981]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jan 1 11:45:08 rene dbus2vdr: dbus2vdr-daemon on rene starting, conf = /var/lib/vdr/plugins/dbus2vdr
Jan 1 11:45:08 rene kernel: [ 8.289577] init: failsafe main process (946) killed by TERM signal
Jan 1 11:45:08 rene kernel: [ 8.315947] init: vdr-exit-2 main process (1276) terminated with status 1
Jan 1 11:45:08 rene dbus[981]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Jan 1 11:45:08 rene polkitd[1328]: started daemon version 0.104 using authority implementation `local' version `0.104'
Jan 1 11:45:08 rene dbus[981]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jan 1 11:45:08 rene dbus[981]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jan 1 11:45:08 rene anacron[1372]: Anacron 2.3 started on 2014-01-01
Jan 1 11:45:08 rene acpid: starting up with proc fs
Jan 1 11:45:08 rene acpid: 35 rules loaded
Jan 1 11:45:08 rene acpid: waiting for events: event logging is off
Jan 1 11:45:08 rene anacron[1372]: Will run job `cron.daily' in 5 min.
Jan 1 11:45:08 rene anacron[1372]: Jobs will be executed sequentially
Jan 1 11:45:08 rene cron[1353]: (CRON) INFO (pidfile fd = 3)
Jan 1 11:45:08 rene cron[1375]: (CRON) STARTUP (fork ok)
Jan 1 11:45:08 rene cron[1375]: (CRON) INFO (Running @reboot jobs)
Jan 1 11:45:09 rene dbus[981]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Jan 1 11:45:09 rene dbus[981]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jan 1 11:45:09 rene kernel: [ 8.600549] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Jan 1 11:45:09 rene kernel: [ 8.600932] NFSD: starting 90-second grace period
Jan 1 11:45:09 rene avahi-daemon[1560]: Found user 'avahi' (UID 103) and group 'avahi' (GID 108).
Jan 1 11:45:09 rene avahi-daemon[1560]: Successfully dropped root privileges.
Jan 1 11:45:09 rene avahi-daemon[1560]: avahi-daemon 0.6.30 starting up.
Jan 1 11:45:09 rene avahi-daemon[1560]: Successfully called chroot().
Jan 1 11:45:09 rene avahi-daemon[1560]: Successfully dropped remaining capabilities.
Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/udisks.service.
Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-audio.service.
Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-picture.service.
Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-svdrp.service.
Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-vdr.service.
Jan 1 11:45:09 rene avahi-daemon[1560]: Loading service file /services/vdr-video.service.
Jan 1 11:45:09 rene avahi-daemon[1560]: Network interface enumeration completed.
Jan 1 11:45:09 rene avahi-daemon[1560]: Registering HINFO record with values 'X86_64'/'LINUX'.
Jan 1 11:45:09 rene avahi-daemon[1560]: Server startup complete. Host name is rene.local. Local service cookie is 1397249250.
Jan 1 11:45:09 rene avahi-daemon[1560]: Service "Videos on rene" (/services/vdr-video.service) successfully established.
Jan 1 11:45:09 rene avahi-daemon[1560]: Service "Recordings on rene" (/services/vdr-vdr.service) successfully established.
Jan 1 11:45:09 rene avahi-daemon[1560]: Service "SVDRP on rene" (/services/vdr-svdrp.service) successfully established.
Jan 1 11:45:09 rene avahi-daemon[1560]: Service "Pictures on rene" (/services/vdr-picture.service) successfully established.
Jan 1 11:45:09 rene avahi-daemon[1560]: Service "Music on rene" (/services/vdr-audio.service) successfully established.
Jan 1 11:45:09 rene avahi-daemon[1560]: Service "rene" (/services/udisks.service) successfully established.
Jan 1 11:45:09 rene rpc.mountd[1566]: Version 1.2.5 starting
Jan 1 11:45:09 rene avahi-mounter[1561]: mount static to /srv/vdr/video.00
Jan 1 11:45:09 rene avahi-mounter[1561]: initialized zeroconf browser on rene
Jan 1 11:45:10 rene kernel: [ 9.617167] survey done event(c)
Jan 1 11:45:10 rene wpa_supplicant[1012]: Trying to associate with 00:16:0a:1e:79:b8 (SSID='10001' freq=2442 MHz)
Jan 1 11:45:10 rene wpa_supplicant[1012]: Association request to the driver failed
Jan 1 11:45:10 rene kernel: [ 9.912296] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
Jan 1 11:45:10 rene kernel: [ 9.912301] set_mode = IW_MODE_INFRA
Jan 1 11:45:10 rene kernel: [ 9.912314]
Jan 1 11:45:10 rene kernel: [ 9.912315] wpa_ie(length:22):
Jan 1 11:45:10 rene kernel: [ 9.912317] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
Jan 1 11:45:10 rene kernel: [ 9.912319] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
Jan 1 11:45:10 rene kernel: [ 9.912321] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
Jan 1 11:45:10 rene kernel: [ 9.912331] =>rtw_wx_set_essid
Jan 1 11:45:10 rene kernel: [ 9.912333] ssid=10001, len=5
Jan 1 11:45:10 rene kernel: [ 9.912337] Set SSID under fw_state=0x00000008
Jan 1 11:45:10 rene kernel: [ 9.912341] [by_bssid:0][assoc_ssid:10001][to_roaming:0] new candidate: 10001(00:16:0a:1e:79:b8) rssi:-85
Jan 1 11:45:10 rene kernel: [ 9.912345] rtw_select_and_join_from_scanned_queue: candidate: 10001(00:16:0a:1e:79:b8)
Jan 1 11:45:10 rene kernel: [ 9.912352] link to Ralink AP
Jan 1 11:45:10 rene kernel: [ 9.912355] <=rtw_wx_set_essid, ret 0
Jan 1 11:45:10 rene kernel: [ 9.912359] Set BSSID under fw_state=0x00000088
Jan 1 11:45:10 rene kernel: [ 9.913425] hw_var_set_opmode()-3434 mode = 2
Jan 1 11:45:10 rene kernel: [ 9.914300] set ch/bw before connected
Jan 1 11:45:10 rene kernel: [ 9.952817] link to Ralink AP
Jan 1 11:45:10 rene kernel: [ 9.952824] issue_deauth to 00:16:0a:1e:79:b8
Jan 1 11:45:10 rene kernel: [ 9.952835] issue_auth
Jan 1 11:45:10 rene kernel: [ 9.955301] OnAuthClient
Jan 1 11:45:10 rene kernel: [ 9.955308] network.SupportedRates[0]=82
Jan 1 11:45:10 rene kernel: [ 9.955310] network.SupportedRates[1]=84
Jan 1 11:45:10 rene kernel: [ 9.955312] network.SupportedRates[2]=8B
Jan 1 11:45:10 rene kernel: [ 9.955315] network.SupportedRates[3]=96
Jan 1 11:45:10 rene kernel: [ 9.955317] network.SupportedRates[4]=12
Jan 1 11:45:10 rene kernel: [ 9.955319] network.SupportedRates[5]=24
Jan 1 11:45:10 rene kernel: [ 9.955321] network.SupportedRates[6]=48
Jan 1 11:45:10 rene kernel: [ 9.955323] network.SupportedRates[7]=6C
Jan 1 11:45:10 rene kernel: [ 9.955325] network.SupportedRates[8]=0C
Jan 1 11:45:10 rene kernel: [ 9.955327] network.SupportedRates[9]=18
Jan 1 11:45:10 rene kernel: [ 9.955330] network.SupportedRates[10]=30
Jan 1 11:45:10 rene kernel: [ 9.955332] network.SupportedRates[11]=60
Jan 1 11:45:10 rene kernel: [ 9.955334] bssrate_len = 12
Jan 1 11:45:10 rene wpa_supplicant[1012]: Associated with 00:16:0a:1e:79:b8
Jan 1 11:45:10 rene kernel: [ 9.958929] OnAssocRsp
Jan 1 11:45:10 rene kernel: [ 9.958935] report_join_res(3)
Jan 1 11:45:10 rene kernel: [ 9.958939] rtw_joinbss_update_network
Jan 1 11:45:10 rene kernel: [ 9.958942] +rtw_update_ht_cap()
Jan 1 11:45:10 rene kernel: [ 9.958949] rtw_joinbss_update_stainfo
Jan 1 11:45:10 rene kernel: [ 9.958952] ### Set STA_(0) info
Jan 1 11:45:10 rene kernel: [ 9.958976] HW_VAR_BASIC_RATE: BrateCfg(0x15f)
Jan 1 11:45:10 rene kernel: [ 9.959457] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 1 11:45:10 rene kernel: [ 9.960071] WMM(0): 0, a42b
Jan 1 11:45:10 rene kernel: [ 9.960182] WMM(1): 0, a44f
Jan 1 11:45:10 rene kernel: [ 9.960306] WMM(2): 0, 5e4322
Jan 1 11:45:10 rene kernel: [ 9.960427] WMM(3): 0, 2f3222
Jan 1 11:45:10 rene kernel: [ 9.960429] HTOnAssocRsp
Jan 1 11:45:10 rene kernel: [ 9.966430] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
Jan 1 11:45:10 rene kernel: [ 9.966432] ==> rssi_level:0, rate_bitmap:0x000ff015
Jan 1 11:45:10 rene kernel: [ 9.966436] ### MacID(0),Set Max Tx RPT MID(1)
Jan 1 11:45:10 rene kernel: [ 9.966552] ### rtl8188e_set_FwMediaStatus_cmd: MStatus=1 MACID=0
Jan 1 11:45:10 rene kernel: [ 9.968303] rtl8188e_set_FwJoinBssReport_cmd mstatus(1)
Jan 1 11:45:10 rene kernel: [ 9.969176] SetFwRsvdPagePkt
Jan 1 11:45:10 rene kernel: [ 9.969186] SetFwRsvdPagePkt: Set RSVD page location to Fw
Jan 1 11:45:10 rene kernel: [ 9.970176] rtl8188e_set_FwJoinBssReport_cmd: 1 Download RSVD success! DLBcnCount:1, poll:1
Jan 1 11:45:10 rene kernel: [ 9.970679] Set RSVD page location to Fw.
Jan 1 11:45:10 rene kernel: [ 9.970801] =>mlmeext_joinbss_event_callback
Jan 1 11:45:10 rene kernel: [ 10.215355] init: plymouth-stop pre-start process (1673) terminated with status 1
Jan 1 11:45:11 rene kernel: [ 10.740086] Group handshake still in progress !!!
Jan 1 11:45:11 rene kernel: [ 10.745082] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
Jan 1 11:45:11 rene kernel: [ 10.745084] ==> rssi_level:3, rate_bitmap:0x000ff015
Jan 1 11:45:11 rene vdr-sxfe[1553]: [1553] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:11 rene vdr-sxfe[1553]: [1553] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:11 rene vdr-sxfe[1553]: [1553] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:11 rene vdr-sxfe[1553]: [1553] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:11 rene wpa_supplicant[1012]: WPA: Key negotiation completed with 00:16:0a:1e:79:b8 [PTK=CCMP GTK=CCMP]
Jan 1 11:45:11 rene wpa_supplicant[1012]: CTRL-EVENT-CONNECTED - Connection to 00:16:0a:1e:79:b8 completed (auth) [id=0 id_str=]
Jan 1 11:45:11 rene kernel: [ 11.158806]
Jan 1 11:45:11 rene kernel: [ 11.158808] ~~~~stastakey:unicastkey
Jan 1 11:45:11 rene kernel: [ 11.158819]
Jan 1 11:45:11 rene kernel: [ 11.158820] ~~~~stastakey:groupkey
Jan 1 11:45:11 rene kernel: [ 11.158823] ==> rtw_set_key algorithm(4),keyid(1),key_mask(2)
Jan 1 11:45:11 rene kernel: [ 11.161355] OnAction_back
Jan 1 11:45:11 rene kernel: [ 11.161360] OnAction_back, action=0
Jan 1 11:45:11 rene kernel: [ 11.161363] issue_action_BA, category=3, action=1, status=0
Jan 1 11:45:11 rene wpa_action: WPA_IFACE=wlan0 WPA_ACTION=CONNECTED
Jan 1 11:45:11 rene wpa_action: WPA_ID=0 WPA_ID_STR= WPA_CTRL_DIR=/var/run/wpa_supplicant
Jan 1 11:45:11 rene wpa_action: ifup wlan0=default
Jan 1 11:45:11 rene avahi-daemon[1560]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.0.2.
Jan 1 11:45:11 rene avahi-daemon[1560]: New relevant interface wlan0.IPv4 for mDNS.
Jan 1 11:45:11 rene avahi-daemon[1560]: Registering new address record for 192.168.0.2 on wlan0.IPv4.
Jan 1 11:45:11 rene kernel: [ 11.280307] init: vdr-frontend main process (1553) terminated with status 250
Jan 1 11:45:11 rene kernel: [ 11.280346] init: vdr-frontend main process ended, respawning
Jan 1 11:45:11 rene avahi-daemon[1560]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::fa1a:67ff:fe26:b7bd.
Jan 1 11:45:11 rene avahi-daemon[1560]: New relevant interface wlan0.IPv6 for mDNS.
Jan 1 11:45:11 rene avahi-daemon[1560]: Registering new address record for fe80::fa1a:67ff:fe26:b7bd on wlan0.*.
Jan 1 11:45:12 rene wpa_action: creating sendsigs omission pidfile: /run/sendsigs.omit.d/wpasupplicant.wpa_supplicant.wlan0.pid
Jan 1 11:45:12 rene wpa_action: bssid=00:16:0a:1e:79:b8
Jan 1 11:45:12 rene wpa_action: ssid=10001
Jan 1 11:45:12 rene wpa_action: id=0
Jan 1 11:45:12 rene wpa_action: mode=station
Jan 1 11:45:12 rene wpa_action: pairwise_cipher=CCMP
Jan 1 11:45:12 rene wpa_action: group_cipher=CCMP
Jan 1 11:45:12 rene wpa_action: key_mgmt=WPA2-PSK
Jan 1 11:45:12 rene wpa_action: wpa_state=COMPLETED
Jan 1 11:45:12 rene wpa_action: ip_address=192.168.0.2
Jan 1 11:45:12 rene avahi-mounter[1561]: Resolved type _nfs._tcp on rene.local
Jan 1 11:45:12 avahi-mounter[1561]: last message repeated 3 times
Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:12 rene vdr-sxfe[1823]: [1823] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:12 rene avahi-mounter[1561]: Resolved type _nfs._tcp on rene.local
Jan 1 11:45:13 avahi-mounter[1561]: last message repeated 3 times
Jan 1 11:45:13 rene kernel: [ 12.445444] init: vdr-frontend main process (1823) terminated with status 250
Jan 1 11:45:13 rene kernel: [ 12.445484] init: vdr-frontend main process ended, respawning
Jan 1 11:45:13 rene vdr-sxfe[1882]: [1882] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:13 rene vdr-sxfe[1882]: [1882] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:13 rene vdr-sxfe[1882]: [1882] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:13 rene vdr-sxfe[1882]: [1882] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:14 rene kernel: [ 13.446984] init: vdr-frontend main process (1882) terminated with status 250
Jan 1 11:45:14 rene kernel: [ 13.447022] init: vdr-frontend main process ended, respawning
Jan 1 11:45:14 rene vdr-sxfe[1922]: [1922] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:14 rene vdr-sxfe[1922]: [1922] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:14 rene vdr-sxfe[1922]: [1922] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:14 rene vdr-sxfe[1922]: [1922] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:15 rene kernel: [ 14.447440] init: vdr-frontend main process (1922) terminated with status 250
Jan 1 11:45:15 rene kernel: [ 14.447478] init: vdr-frontend main process ended, respawning
Jan 1 11:45:15 rene vdr-sxfe[1957]: [1957] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:15 rene vdr-sxfe[1957]: [1957] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:15 rene vdr-sxfe[1957]: [1957] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:15 rene vdr-sxfe[1957]: [1957] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:15 rene kernel: [ 15.432125] init: vdr-frontend main process (1957) terminated with status 250
Jan 1 11:45:15 rene kernel: [ 15.432162] init: vdr-frontend main process ended, respawning
Jan 1 11:45:16 rene vdr-sxfe[1972]: [1972] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:16 rene vdr-sxfe[1972]: [1972] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:16 rene vdr-sxfe[1972]: [1972] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:16 rene vdr-sxfe[1972]: [1972] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:16 rene kernel: [ 16.416271] init: vdr-frontend main process (1972) terminated with status 250
Jan 1 11:45:16 rene kernel: [ 16.416310] init: vdr-frontend main process ended, respawning
Jan 1 11:45:17 rene kernel: [ 16.757037] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
Jan 1 11:45:17 rene kernel: [ 16.757041] ==> rssi_level:2, rate_bitmap:0x000ff000
Jan 1 11:45:17 rene vdr-sxfe[1987]: [1987] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:17 rene vdr-sxfe[1987]: [1987] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:17 rene vdr-sxfe[1987]: [1987] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:17 rene vdr-sxfe[1987]: [1987] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:17 rene kernel: [ 17.396483] init: vdr-frontend main process (1987) terminated with status 250
Jan 1 11:45:17 rene kernel: [ 17.396513] init: vdr-frontend main process ended, respawning
Jan 1 11:45:18 rene vdr-sxfe[2002]: [2002] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:18 rene vdr-sxfe[2002]: [2002] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:18 rene vdr-sxfe[2002]: [2002] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:18 rene vdr-sxfe[2002]: [2002] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:18 rene kernel: [ 18.314215] init: vdr-frontend main process (2002) terminated with status 250
Jan 1 11:45:18 rene kernel: [ 18.314244] init: vdr-frontend main process ended, respawning
Jan 1 11:45:19 rene vdr-sxfe[2017]: [2017] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:19 rene vdr-sxfe[2017]: [2017] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:19 rene vdr-sxfe[2017]: [2017] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:19 rene vdr-sxfe[2017]: [2017] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:19 rene kernel: [ 19.249236] init: vdr-frontend main process (2017) terminated with status 250
Jan 1 11:45:19 rene kernel: [ 19.249264] init: vdr-frontend main process ended, respawning
Jan 1 11:45:20 rene vdr-sxfe[2032]: [2032] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:20 rene vdr-sxfe[2032]: [2032] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:20 rene vdr-sxfe[2032]: [2032] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:20 rene vdr-sxfe[2032]: [2032] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:21 rene ntpdate[1819]: step time server 91.189.89.199 offset 0.645775 sec
Jan 1 11:45:21 rene kernel: [ 20.200326] init: vdr-frontend main process (2032) terminated with status 250
Jan 1 11:45:21 rene kernel: [ 20.200353] init: vdr-frontend main process ended, respawning
Jan 1 11:45:21 rene kernel: [ 20.432028] wlan0: no IPv6 routers present
Jan 1 11:45:22 rene vdr-sxfe[2049]: [2049] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:22 rene vdr-sxfe[2049]: [2049] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:22 rene vdr-sxfe[2049]: [2049] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:22 rene vdr-sxfe[2049]: [2049] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:22 rene kernel: [ 21.184806] init: vdr-frontend main process (2049) terminated with status 250
Jan 1 11:45:22 rene kernel: [ 21.184834] init: vdr-frontend main process ended, respawning
Jan 1 11:45:22 rene vdr-sxfe[2064]: [2064] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:22 rene vdr-sxfe[2064]: [2064] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:22 rene vdr-sxfe[2064]: [2064] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:22 rene vdr-sxfe[2064]: [2064] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:23 rene kernel: [ 22.140031] init: vdr-frontend main process (2064) terminated with status 250
Jan 1 11:45:23 rene kernel: [ 22.140070] init: vdr-frontend main process ended, respawning
Jan 1 11:45:24 rene vdr-sxfe[2079]: [2079] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:24 rene vdr-sxfe[2079]: [2079] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:24 rene vdr-sxfe[2079]: [2079] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:24 rene vdr-sxfe[2079]: [2079] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:24 rene kernel: [ 23.157849] init: vdr-frontend main process (2079) terminated with status 250
Jan 1 11:45:24 rene kernel: [ 23.157887] init: vdr-frontend main process ended, respawning
Jan 1 11:45:25 rene vdr-sxfe[2094]: [2094] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:25 rene vdr-sxfe[2094]: [2094] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:25 rene vdr-sxfe[2094]: [2094] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:25 rene vdr-sxfe[2094]: [2094] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:25 rene kernel: [ 24.192438] init: vdr-frontend main process (2094) terminated with status 250
Jan 1 11:45:25 rene kernel: [ 24.192476] init: vdr-frontend main process ended, respawning
Jan 1 11:45:25 rene kernel: [ 24.773166] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
Jan 1 11:45:25 rene kernel: [ 24.773169] ==> rssi_level:3, rate_bitmap:0x000ff015
Jan 1 11:45:26 rene vdr-sxfe[2109]: [2109] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:26 rene vdr-sxfe[2109]: [2109] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:26 rene vdr-sxfe[2109]: [2109] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:26 rene vdr-sxfe[2109]: [2109] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:26 rene kernel: [ 25.210187] init: vdr-frontend main process (2109) terminated with status 250
Jan 1 11:45:26 rene kernel: [ 25.210225] init: vdr-frontend main process ended, respawning
Jan 1 11:45:27 rene vdr-sxfe[2124]: [2124] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:27 rene vdr-sxfe[2124]: [2124] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:27 rene vdr-sxfe[2124]: [2124] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:27 rene vdr-sxfe[2124]: [2124] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:27 rene kernel: [ 26.207232] init: vdr-frontend main process (2124) terminated with status 250
Jan 1 11:45:27 rene kernel: [ 26.207260] init: vdr-frontend main process ended, respawning
Jan 1 11:45:28 rene vdr-sxfe[2139]: [2139] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:28 rene vdr-sxfe[2139]: [2139] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:28 rene vdr-sxfe[2139]: [2139] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:28 rene vdr-sxfe[2139]: [2139] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:28 rene kernel: [ 27.179202] init: vdr-frontend main process (2139) terminated with status 250
Jan 1 11:45:28 rene kernel: [ 27.179242] init: vdr-frontend main process ended, respawning
Jan 1 11:45:29 rene vdr-sxfe[2154]: [2154] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:29 rene vdr-sxfe[2154]: [2154] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:29 rene vdr-sxfe[2154]: [2154] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:29 rene vdr-sxfe[2154]: [2154] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:29 rene kernel: [ 28.163621] init: vdr-frontend main process (2154) terminated with status 250
Jan 1 11:45:29 rene kernel: [ 28.163660] init: vdr-frontend main process ended, respawning
Jan 1 11:45:30 rene vdr-sxfe[2169]: [2169] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:30 rene vdr-sxfe[2169]: [2169] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:30 rene vdr-sxfe[2169]: [2169] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:30 rene vdr-sxfe[2169]: [2169] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:30 rene kernel: [ 29.181370] init: vdr-frontend main process (2169) terminated with status 250
Jan 1 11:45:30 rene kernel: [ 29.181408] init: vdr-frontend main process ended, respawning
Jan 1 11:45:31 rene vdr-sxfe[2184]: [2184] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:31 rene vdr-sxfe[2184]: [2184] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:31 rene vdr-sxfe[2184]: [2184] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:31 rene vdr-sxfe[2184]: [2184] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:31 rene kernel: [ 30.199290] init: vdr-frontend main process (2184) terminated with status 250
Jan 1 11:45:31 rene kernel: [ 30.199329] init: vdr-frontend main process ended, respawning
Jan 1 11:45:32 rene vdr-sxfe[2199]: [2199] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:32 rene vdr-sxfe[2199]: [2199] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:32 rene vdr-sxfe[2199]: [2199] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:32 rene vdr-sxfe[2199]: [2199] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:32 rene kernel: [ 31.217092] init: vdr-frontend main process (2199) terminated with status 250
Jan 1 11:45:32 rene kernel: [ 31.217131] init: vdr-frontend main process ended, respawning
Jan 1 11:45:33 rene vdr-sxfe[2214]: [2214] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:33 rene vdr-sxfe[2214]: [2214] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:33 rene vdr-sxfe[2214]: [2214] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:33 rene vdr-sxfe[2214]: [2214] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:33 rene kernel: [ 32.234981] init: vdr-frontend main process (2214) terminated with status 250
Jan 1 11:45:33 rene kernel: [ 32.235019] init: vdr-frontend main process ended, respawning
Jan 1 11:45:34 rene vdr-sxfe[2229]: [2229] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:34 rene vdr-sxfe[2229]: [2229] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:34 rene vdr-sxfe[2229]: [2229] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:34 rene vdr-sxfe[2229]: [2229] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:34 rene kernel: [ 33.219431] init: vdr-frontend main process (2229) terminated with status 250
Jan 1 11:45:34 rene kernel: [ 33.219470] init: vdr-frontend main process ended, respawning
Jan 1 11:45:35 rene vdr-sxfe[2244]: [2244] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:35 rene vdr-sxfe[2244]: [2244] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:35 rene vdr-sxfe[2244]: [2244] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:35 rene vdr-sxfe[2244]: [2244] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:35 rene kernel: [ 34.220556] init: vdr-frontend main process (2244) terminated with status 250
Jan 1 11:45:35 rene kernel: [ 34.220595] init: vdr-frontend main process ended, respawning
Jan 1 11:45:36 rene vdr-sxfe[2259]: [2259] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:36 rene vdr-sxfe[2259]: [2259] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:36 rene vdr-sxfe[2259]: [2259] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:36 rene vdr-sxfe[2259]: [2259] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:36 rene kernel: [ 35.255209] init: vdr-frontend main process (2259) terminated with status 250
Jan 1 11:45:36 rene kernel: [ 35.255247] init: vdr-frontend main process ended, respawning
Jan 1 11:45:37 rene vdr-sxfe[2276]: [2276] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:37 rene vdr-sxfe[2276]: [2276] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:37 rene vdr-sxfe[2276]: [2276] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:37 rene vdr-sxfe[2276]: [2276] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:37 rene kernel: [ 36.256265] init: vdr-frontend main process (2276) terminated with status 250
Jan 1 11:45:37 rene kernel: [ 36.256304] init: vdr-frontend main process ended, respawning
Jan 1 11:45:38 rene vdr-sxfe[2291]: [2291] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:38 rene vdr-sxfe[2291]: [2291] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:38 rene vdr-sxfe[2291]: [2291] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:38 rene vdr-sxfe[2291]: [2291] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:38 rene kernel: [ 37.257336] init: vdr-frontend main process (2291) terminated with status 250
Jan 1 11:45:38 rene kernel: [ 37.257375] init: vdr-frontend main process ended, respawning
Jan 1 11:45:39 rene vdr-sxfe[2306]: [2306] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:39 rene vdr-sxfe[2306]: [2306] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:39 rene vdr-sxfe[2306]: [2306] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:39 rene vdr-sxfe[2306]: [2306] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:39 rene kernel: [ 38.308027] init: vdr-frontend main process (2306) terminated with status 250
Jan 1 11:45:39 rene kernel: [ 38.308065] init: vdr-frontend main process ended, respawning
Jan 1 11:45:40 rene vdr-sxfe[2321]: [2321] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:40 rene vdr-sxfe[2321]: [2321] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:40 rene vdr-sxfe[2321]: [2321] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:40 rene vdr-sxfe[2321]: [2321] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:40 rene kernel: [ 39.359700] init: vdr-frontend main process (2321) terminated with status 250
Jan 1 11:45:40 rene kernel: [ 39.359738] init: vdr-frontend main process ended, respawning
Jan 1 11:45:41 rene vdr-sxfe[2545]: [2545] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:41 rene vdr-sxfe[2545]: [2545] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:41 rene vdr-sxfe[2545]: [2545] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:41 rene vdr-sxfe[2545]: [2545] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:41 rene kernel: [ 40.425740] init: vdr-frontend main process (2545) terminated with status 250
Jan 1 11:45:41 rene kernel: [ 40.425778] init: vdr-frontend main process ended, respawning
Jan 1 11:45:42 rene vdr-sxfe[2764]: [2764] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:42 rene vdr-sxfe[2764]: [2764] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:42 rene vdr-sxfe[2764]: [2764] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:42 rene vdr-sxfe[2764]: [2764] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:42 rene kernel: [ 41.428885] init: vdr-frontend main process (2764) terminated with status 250
Jan 1 11:45:42 rene kernel: [ 41.428924] init: vdr-frontend main process ended, respawning
Jan 1 11:45:43 rene vdr-sxfe[2779]: [2779] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:43 rene vdr-sxfe[2779]: [2779] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:43 rene vdr-sxfe[2779]: [2779] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:43 rene vdr-sxfe[2779]: [2779] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:43 rene kernel: [ 42.463312] init: vdr-frontend main process (2779) terminated with status 250
Jan 1 11:45:43 rene kernel: [ 42.463351] init: vdr-frontend main process ended, respawning
Jan 1 11:45:44 rene vdr-sxfe[2794]: [2794] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:44 rene vdr-sxfe[2794]: [2794] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:44 rene vdr-sxfe[2794]: [2794] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:44 rene vdr-sxfe[2794]: [2794] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:44 rene kernel: [ 43.464457] init: vdr-frontend main process (2794) terminated with status 250
Jan 1 11:45:44 rene kernel: [ 43.464496] init: vdr-frontend main process ended, respawning
Jan 1 11:45:44 rene vdr: [2808] VDR version 2.0.3 started
Jan 1 11:45:44 rene vdr: [2808] codeset is 'UTF-8' - known
Jan 1 11:45:45 rene vdr: [2808] found 28 locales in /usr/share/locale
Jan 1 11:45:45 rene vdr: [2808] loading plugin: /usr/lib/vdr/plugins/libvdr-xineliboutput.so.2.0.0
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/setup.conf
Jan 1 11:45:45 rene vdr: [2808] ERROR: unknown config parameter: DumpNaluFill = 1
Jan 1 11:45:45 rene vdr: [2808] ERROR: unknown config parameter: DumpNaluFill = 1
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/sources.conf
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/diseqc.conf
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/scr.conf
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/channels.conf
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/timers.conf
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/commands.conf
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/reccmds.conf
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/svdrphosts.conf
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/remote.conf
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/keymacros.conf
Jan 1 11:45:45 rene vdr: [2808] ERROR: unknown plugin 'yaepghd'
Jan 1 11:45:45 rene vdr: [2808] ERROR: empty key macro
Jan 1 11:45:45 rene vdr: [2808] registered source parameters for 'A - ATSC'
Jan 1 11:45:45 rene vdr: [2808] registered source parameters for 'C - DVB-C'
Jan 1 11:45:45 rene vdr: [2808] registered source parameters for 'S - DVB-S'
Jan 1 11:45:45 rene vdr: [2808] registered source parameters for 'T - DVB-T'
Jan 1 11:45:45 rene vdr: [2814] video directory scanner thread started (pid=2808, tid=2814, prio=high)
Jan 1 11:45:45 rene vdr: [2808] probing /dev/dvb/adapter0/frontend0
Jan 1 11:45:45 rene vdr: [2808] creating cDvbDevice
Jan 1 11:45:45 rene vdr: [2808] new device number 1
Jan 1 11:45:45 rene vdr: [2816] epg data reader thread started (pid=2808, tid=2816, prio=high)
Jan 1 11:45:45 rene vdr: [2816] reading EPG data from /var/cache/vdr/epg.data
Jan 1 11:45:45 rene vdr: [2815] video directory scanner thread started (pid=2808, tid=2815, prio=high)
Jan 1 11:45:45 rene vdr: [2815] video directory scanner thread ended (pid=2808, tid=2815)
Jan 1 11:45:45 rene vdr: [2814] video directory scanner thread ended (pid=2808, tid=2814)
Jan 1 11:45:45 rene vdr: [2816] epg data reader thread ended (pid=2808, tid=2816)
Jan 1 11:45:45 rene vdr-sxfe[2810]: [2810] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:45 rene vdr-sxfe[2810]: [2810] [input_vdr] (ERROR (xine_input_vdr.c,5362): Operation now in progress)
Jan 1 11:45:45 rene vdr-sxfe[2810]: [2810] [input_vdr] Can't connect to tcp://127.0.0.1:37890
Jan 1 11:45:45 rene vdr-sxfe[2810]: [2810] [input_vdr] (ERROR (xine_input_vdr.c,5789): Operation now in progress)
Jan 1 11:45:45 rene vdr: [2808] DVB API version is 0x0504 (VDR was built with 0x0504)
Jan 1 11:45:45 rene vdr: [2808] frontend 0/0 provides DVB-C with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("Philips TDA10023 DVB-C")
Jan 1 11:45:45 rene vdr: [2825] tuner on frontend 0/0 thread started (pid=2808, tid=2825, prio=high)
Jan 1 11:45:45 rene vdr: [2825] cTimeMs: using monotonic clock (resolution is 1 ns)
Jan 1 11:45:45 rene vdr: [2808] found 1 DVB device
Jan 1 11:45:45 rene vdr: [2826] section handler thread started (pid=2808, tid=2826, prio=low)
Jan 1 11:45:45 rene vdr: [2808] initializing plugin: xineliboutput (1.0.90-cvs): X11/xine-lib Ausgabe-Plugin
Jan 1 11:45:45 rene vdr: [2808] new device number 9
Jan 1 11:45:45 rene vdr: [2808] [xine..put] cTimePts: clock_gettime(CLOCK_MONOTONIC): clock resolution 0 us
Jan 1 11:45:45 rene vdr: [2808] [xine..put] cTimePts: using monotonic clock
Jan 1 11:45:45 rene vdr: [2808] [xine..put] RTP SSRC: 0x562b3be8
Jan 1 11:45:45 rene vdr: [2808] setting primary device to 2
Jan 1 11:45:45 rene vdr: [2808] assuming manual start of VDR
Jan 1 11:45:45 rene vdr: [2808] skin "anthra_1920_FSE" not available - using "lcars" instead
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/themes/lcars-default.theme
Jan 1 11:45:45 rene vdr: [2808] starting plugin: xineliboutput
Jan 1 11:45:45 rene vdr: [2827] [xine..put] Have CAP_SYS_NICE capability
Jan 1 11:45:45 rene vdr: [2828] Remote decoder/display server (cXinelibServer) thread started (pid=2808, tid=2828, prio=high)
Jan 1 11:45:45 rene vdr: [2828] [xine..put] Have CAP_SYS_NICE capability
Jan 1 11:45:45 rene vdr: [2828] [xine..put] cXinelibServer priority set successful SCHED_RR 2 [1,99]
Jan 1 11:45:45 rene vdr: [2828] [xine..put] Listening on port 37890
Jan 1 11:45:45 rene vdr: [2828] [xine..put] Listening for UDP broadcasts on port 37890
Jan 1 11:45:45 rene vdr: [2828] [discovery] BROADCAST: VDR xineliboutput DISCOVERY 1.0#015#012Server port: 37890#015#012Server version: xineliboutput-1.0.90-cvs#015#012#015
Jan 1 11:45:45 rene kernel: [ 44.498906] init: vdr-frontend main process (2810) terminated with status 250
Jan 1 11:45:45 rene kernel: [ 44.498945] init: vdr-frontend main process ended, respawning
Jan 1 11:45:45 rene vdr: [2808] [xine..put] cXinelibDevice::StartDevice(): Device started
Jan 1 11:45:45 rene vdr: [2808] skin "anthra_1920_FSE" not available - using "lcars" instead
Jan 1 11:45:45 rene vdr: [2808] loading /var/lib/vdr/themes/lcars-default.theme
Jan 1 11:45:45 rene vdr: [2808] remote control KBD - keys known
Jan 1 11:45:45 rene vdr: [2808] switching to channel 6
Jan 1 11:45:45 rene vdr: [2830] KBD remote control thread started (pid=2808, tid=2830, prio=high)
Jan 1 11:45:45 rene vdr: [2808] OSD size changed to 1920x1080 @ 1
Jan 1 11:45:45 rene vdr: [2808] [xine..put] cXinelibOsd::CanHandleAreas(): Device does not support ARGB
Jan 1 11:45:45 rene vdr: [2831] receiver on device 1 thread started (pid=2808, tid=2831, prio=high)
Jan 1 11:45:45 rene vdr: [2833] TS buffer on device 1 thread started (pid=2808, tid=2833, prio=high)
Jan 1 11:45:46 rene vdr: [2831] [xine..put] Detected video size 720x576
Jan 1 11:45:46 rene vdr: [2828] [xine..put] Client 0 connected: 127.0.0.1:45010
Jan 1 11:45:46 rene vdr: [2828] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
Jan 1 11:45:46 rene vdr: [2828] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Jan 1 11:45:46 rene vdr: [2828] [xine..put] Client 1 connected: 127.0.0.1:45011
Jan 1 11:45:46 rene vdr: [2828] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
Jan 1 11:45:46 rene vdr: [2828] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Jan 1 11:45:46 rene vdr: [2828] [xine..put] Data connection (TCP) requested
Jan 1 11:45:46 rene vdr: [2828] [xine..put] cBackgroundWriterI initialized (buffer 2048 kb)
Jan 1 11:45:46 rene vdr: [2828] [xine..put] cTcpWriter initialized (buffer 2048 kb)
Jan 1 11:45:46 rene vdr-sxfe[2836]: [2851] [console] read_key: read(stdin) failed: no stdin

und die setup.conf

seahawk1986 · 1. Januar 2014

Setz mal bitte im WFE das Ausgabeplugin erneut und poste ein komplettes, lesbares syslog: http://www.yavdr.org/documentation/0.5/de/ch06s01.html

Dass dvbsddevice und dvbhddevice in der order.conf aktiv sind passt überhaupt nicht.

Morpheus1607 · 1. Januar 2014

hier mal die syslog

http://paste.ubuntu.com/6672835/

hab das ausgabeplugin auf xine und wieder auf xinlibout gesetzt

seahawk1986 · 1. Januar 2014

Hast du noch Plugins aus anderen Quellen installiert als dem yaVDR-PPA?
Was sagt denn apt-cache zu den Versionsnummern?

Code

apt-cache policy vdr vdr-plugin-dbus2vdr vdr-plugin-xineliboutput yavdr-essential

Morpheus1607 · 1. Januar 2014

Installiert: 2.0.3-3yavdr0~0.5
Kandidat: 2.0.3-3yavdr0~0.5
Versionstabelle:
*** 2.0.3-3yavdr0~0.5 0
500 http://ppa.launchpad.net/yavdr/stable-vdr/ubuntu/ precise/main amd64 Packages
100 /var/lib/dpkg/status
1.7.22-1 0
500 http://de.archive.ubuntu.com/ubuntu/ precise/universe amd64 Packages
vdr-plugin-dbus2vdr:
Installiert: 20131025104828stable-0yavdr0~precise
Kandidat: 20131025104828stable-0yavdr0~precise
Versionstabelle:
*** 20131025104828stable-0yavdr0~precise 0
500 http://ppa.launchpad.net/yavdr/stable-vdr/ubuntu/ precise/main amd64 Packages
100 /var/lib/dpkg/status
vdr-plugin-xineliboutput:
Installiert: 1.0.7+cvs20130117-1yavdr6~precise
Kandidat: 1.0.7+cvs20130117-1yavdr6~precise
Versionstabelle:
*** 1.0.7+cvs20130117-1yavdr6~precise 0
500 http://ppa.launchpad.net/yavdr/stable-vdr/ubuntu/ precise/main amd64 Packages
100 /var/lib/dpkg/status
1.0.7+cvs20111211.1625-1 0
500 http://de.archive.ubuntu.com/ubuntu/ precise/universe amd64 Packages
yavdr-essential:
Installiert: 20130905102221stable-0yavdr0~precise
Kandidat: 20130905102221stable-0yavdr0~precise
Versionstabelle:
*** 20130905102221stable-0yavdr0~precise 0
500 http://ppa.launchpad.net/yavdr/stable-yavdr/ubuntu/ precise/main amd64 Packages
100 /var/lib/dpkg/status

eigentlich nicht hoffe ich

seahawk1986 · 1. Januar 2014

Ok, die Paketversionen sollten passen.
Wie sieht die /etc/default/vdr aus? Darf der VDR starten?

Mach mal folgendes:

Code

sudo stop vdr-frontend
sudo stop vdr
sudo start vdr
# mindestens 30 Sekunden warten
pastebinit /var/log/syslog

Morpheus1607 · 1. Januar 2014

und da beginnen die probleme:

stop vdr-frontend funktioniert noch,

stop vdr bringt
stop vdr
stop: Unknown instance:

die /etc/default/vdr.conf

# Change to 1 to enable vdr's init-script
ENABLED=1

# Change this to 1 if you want vdr to be able to shutdown the
# computer
ENABLE_SHUTDOWN=1

# Options that will be passed to vdr's commandline
# for example: OPTIONS="-w 15"
OPTIONS="-w 0"

also starten müsste er eigentlich dürfen

http://paste.ubuntu.com/6673040/

seahawk1986 · 1. Januar 2014

Das ist der Fehler - er hat keine Zugriffsrechte auf das Aufnahmeverzeichnis:

Code

Jan  1 13:06:34 rene vdr: [4986] ERROR: can't access /srv/vdr/video.00

Morpheus1607 · 1. Januar 2014

oh alles klar

reicht einchown -R vdr:vdr /srv

oder chown -R vdr:vdr /srv/video.00 ?

seahawk1986 · 1. Januar 2014

a) Ich verstehe nicht warum man unbedingt an den Berechtigungen von Ordnern herumspielen muss wenn man keine Ahnung hat (und dann noch eine irreführende vermutete Ursache angibt, denn das Problem ist garantiert nicht durch ein dist-upgrade verursacht worden).
b) Der User VDR braucht Lese- und Schreibrechte für /srv/vdr/video.00 und er muss auf die übergeordneten Verzeichnisse mindestens lesend zugreifen dürfen.
Das sollte also falls du nich noch mit chmod rumgespielt hast alles gerade biegen:

Code

chown -R vdr:vdr /srv

Morpheus1607 · 1. Januar 2014

dann weiß ich woher das kommt, mir war meine Medienplatte abgeraucht, ich hatte ne Image gezogen, bzw. die Ordner auf ner anderen Platte neu erstellt und vergessen die Rechte für den VDR zu setzen, nun ist alles wieder da und alles beim alten.

Danke dir Seahawk.

Sorry deine Zeit verschwendet zu haben.

[Gelöst] eigene Selberschuld.... VDR lässt sich nur noch manuell starten und andere Probleme...

Jetzt mitmachen!

Teilen