Hallo Leute,
Ich habe ein Problem mit yaVDR das ich einfach nicht indem Griff bekomme.
Wenn ich vdr starte, erkennt er die TV Karte nicht (USB Technotrend S2-4600)
Wenn ich sie vom USB entferne, wieder an stecke und den vdr reboote findet er sie dann und ich kann fernsehen schauen
Das ist aber vor allem bei Timer aufnahmen ein Problem und Auch sehr umständlich.
Einen Workaround Habe ich schon gefunden, der funktioniert aber auch nur zu 80%.
Wenn ich die USB Ports bei Rechner aus mit Strom versorgen lasse, findet er die karte direkt. Es scheint also was damit zu tun haben dass er sie nicht erkennt, wenn er sie aus dem Cold State startet.
Im Log seht ihr wie ich den Workaround angewendet habe, und was danach im System passiert ist.
Wenn hier jemand eine Idee hat würde es mich echt sehr freuen.
Habe mich durch yavdr schon ziemlich viel mit Linux beschäftigt und bin auch mittlerweile sehr zufrieden, aber hier komme ich einfach nicht dahinter. 
KernelLog ist angehängt, ich denke es wird erst ganz am Ende interessant, habe aber nicht viel Erfahrung im Umgang mit Logs und hab zur Sicherheit mal alles angehängt.
Code
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-33-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48~precise1-Ubuntu SMP Thu Oct 24 16:28:06 UTC 2013 (Ubuntu 3.8.0-33.48~precise1-generic 3.8.13.11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-33-generic root=UUID=2b05c610-28bf-4b14-8d1d-185991a69a9e ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd7b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd7ba000-0x00000000de075fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de076000-0x00000000de0fdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de0fe000-0x00000000de19afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de19b000-0x00000000de97efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de97f000-0x00000000de97ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de980000-0x00000000de9c2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de9c3000-0x00000000df418fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df419000-0x00000000df7f1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7f2000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H77M-ITX, BIOS P1.70 07/12/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FF0000000 write-back
[ 0.000000] 2 base 110000000 mask FF8000000 write-back
[ 0.000000] 3 base 118000000 mask FFC000000 write-back
[ 0.000000] 4 base 11C000000 mask FFE000000 write-back
[ 0.000000] 5 base 11E000000 mask FFF000000 write-back
[ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 256MB, type WB
[ 0.000000] reg 2, base: 4352MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 4480MB, range: 64MB, type WB
[ 0.000000] reg 4, base: 4544MB, range: 32MB, type WB
[ 0.000000] reg 5, base: 4576MB, range: 16MB, type WB
[ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 4080M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 4, base: 4592MB, range: 16MB, type UC
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7a0-0x000fd7af] mapped at [ffff8800000fd7a0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]
[ 0.000000] [mem 0x00000000-0xdf7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11effffff]
[ 0.000000] [mem 0x100000000-0x11effffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x11effffff @ [mem 0xdf7fe000-0xdf7fffff]
[ 0.000000] RAMDISK: [mem 0x36044000-0x37019fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000de180080 00084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000de1898c0 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000de1801a0 0971F (v02 ALASKA A M I 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000de199080 00040
[ 0.000000] ACPI: APIC 00000000de1899d0 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000de189a38 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 00000000de189a80 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: MCFG 00000000de189b28 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000de189b68 007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: AAFT 00000000de18a350 000EA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000de18a440 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000de18a478 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000de18a7e8 00860 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000de18b048 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 00000000de18bae0 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff]
[ 0.000000] NODE_DATA [mem 0x11effb000-0x11effffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a600000-ffff88011e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xdd7b9fff]
[ 0.000000] node 0: [mem 0xde076000-0xde0fdfff]
[ 0.000000] node 0: [mem 0xde97f000-0xde97ffff]
[ 0.000000] node 0: [mem 0xde9c3000-0xdf418fff]
[ 0.000000] node 0: [mem 0xdf7f2000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x11effffff]
[ 0.000000] On node 0 totalpages: 1036852
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14155 pages used for memmap
[ 0.000000] DMA32 zone: 891740 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 124992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dd7ba000 - 00000000de076000
[ 0.000000] PM: Registered nosave memory: 00000000de0fe000 - 00000000de19b000
[ 0.000000] PM: Registered nosave memory: 00000000de19b000 - 00000000de97f000
[ 0.000000] PM: Registered nosave memory: 00000000de980000 - 00000000de9c3000
[ 0.000000] PM: Registered nosave memory: 00000000df419000 - 00000000df7f2000
[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s84928 r8192 d21568 u1048576
[ 0.000000] pcpu-alloc: s84928 r8192 d21568 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1020643
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-33-generic root=UUID=2b05c610-28bf-4b14-8d1d-185991a69a9e ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3983528k/4702208k available (7172k kernel code, 554800k absent, 163880k reserved, 6071k data, 1016k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2594.352 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.70 BogoMIPS (lpj=10377408)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000023] Security Framework initialized
[ 0.000033] AppArmor: AppArmor initialized
[ 0.000034] Yama: becoming mindful.
[ 0.000275] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001221] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001636] Mount-cache hash table entries: 256
[ 0.001774] Initializing cgroup subsys cpuacct
[ 0.001776] Initializing cgroup subsys memory
[ 0.001781] Initializing cgroup subsys devices
[ 0.001782] Initializing cgroup subsys freezer
[ 0.001784] Initializing cgroup subsys blkio
[ 0.001785] Initializing cgroup subsys perf_event
[ 0.001787] Initializing cgroup subsys hugetlb
[ 0.001808] CPU: Physical Processor ID: 0
[ 0.001809] CPU: Processor Core ID: 0
[ 0.001813] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001813] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001817] mce: CPU supports 7 MCE banks
[ 0.001827] CPU0: Thermal monitoring enabled (TM1)
[ 0.001833] process: using mwait in idle threads
[ 0.001837] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.001837] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.001837] tlb_flushall_shift: 1
[ 0.001970] Freeing SMP alternatives: 24k freed
[ 0.003880] ACPI: Core revision 20121018
[ 0.010835] ftrace: allocating 29363 entries in 115 pages
[ 0.024084] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063699] smpboot: CPU0: Intel(R) Celeron(R) CPU G1610 @ 2.60GHz (fam: 06, model: 3a, stepping: 09)
[ 0.063706] TSC deadline timer enabled
[ 0.063709] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.063715] ... version: 3
[ 0.063716] ... bit width: 48
[ 0.063717] ... generic registers: 8
[ 0.063717] ... value mask: 0000ffffffffffff
[ 0.063718] ... max period: 000000007fffffff
[ 0.063719] ... fixed-purpose events: 3
[ 0.063720] ... event mask: 00000007000000ff
[ 0.064736] smpboot: Booting Node 0, Processors #1 OK
[ 0.077854] Brought up 2 CPUs
[ 0.077857] smpboot: Total of 2 processors activated (10377.40 BogoMIPS)
[ 0.077924] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.079192] devtmpfs: initialized
[ 0.079888] EVM: security.selinux
[ 0.079889] EVM: security.SMACK64
[ 0.079890] EVM: security.capability
[ 0.079941] PM: Registering ACPI NVS region [mem 0xde0fe000-0xde19afff] (643072 bytes)
[ 0.079950] PM: Registering ACPI NVS region [mem 0xde980000-0xde9c2fff] (274432 bytes)
[ 0.080587] regulator-dummy: no parameters
[ 0.080622] NET: Registered protocol family 16
[ 0.080758] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.080759] ACPI: bus type pci registered
[ 0.080800] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.080802] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.086970] PCI: Using configuration type 1 for base access
[ 0.087620] bio: create slab <bio-0> at 0
[ 0.087689] ACPI: Added _OSI(Module Device)
[ 0.087691] ACPI: Added _OSI(Processor Device)
[ 0.087692] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.087693] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.088887] ACPI: EC: Look up EC in DSDT
[ 0.090196] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.102175] ACPI: SSDT 00000000de023018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.102480] ACPI: Dynamic OEM Table Load:
[ 0.102481] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.114008] ACPI: SSDT 00000000de024a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.114335] ACPI: Dynamic OEM Table Load:
[ 0.114337] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.125887] ACPI: SSDT 00000000de025c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.126184] ACPI: Dynamic OEM Table Load:
[ 0.126185] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.137964] ACPI: Interpreter enabled
[ 0.137967] ACPI: (supports S0 S1 S4 S5)
[ 0.137983] ACPI: Using IOAPIC for interrupt routing
[ 0.142227] ACPI: No dock devices found.
[ 0.142231] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.142417] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.142419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.142977] PCI host bridge to bus 0000:00
[ 0.142980] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.142982] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.142983] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.142985] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.142986] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.142988] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.142989] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.142991] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.142992] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.142993] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.142995] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[ 0.143003] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.143035] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.143064] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.143103] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.143125] pci 0000:00:14.0: reg 10: [mem 0xf7100000-0xf710ffff 64bit]
[ 0.143196] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.143218] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.143241] pci 0000:00:16.0: reg 10: [mem 0xf711a000-0xf711a00f 64bit]
[ 0.143316] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.143347] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.143368] pci 0000:00:1a.0: reg 10: [mem 0xf7118000-0xf71183ff]
[ 0.143457] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.143482] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.143496] pci 0000:00:1b.0: reg 10: [mem 0xf7110000-0xf7113fff 64bit]
[ 0.143563] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.143586] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.143664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.143690] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.143768] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.143799] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.143819] pci 0000:00:1d.0: reg 10: [mem 0xf7117000-0xf71173ff]
[ 0.143909] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.143933] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
[ 0.144056] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.144073] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 0.144081] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 0.144088] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 0.144095] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 0.144103] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.144110] pci 0000:00:1f.2: reg 24: [mem 0xf7116000-0xf71167ff]
[ 0.144154] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.144170] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.144185] pci 0000:00:1f.3: reg 10: [mem 0xf7115000-0xf71150ff 64bit]
[ 0.144205] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.144256] pci 0000:01:00.0: [10de:1284] type 00 class 0x030000
[ 0.144263] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.144270] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.144278] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.144283] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.144288] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.144323] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
[ 0.144330] pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
[ 0.153767] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.153771] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.153774] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.153779] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.153835] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.153910] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.153929] pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.153963] pci 0000:03:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.153984] pci 0000:03:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.154075] pci 0000:03:00.0: supports D1 D2
[ 0.154077] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161759] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.161764] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.161773] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.161818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.161847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.161875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.161983] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.162157] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.162689] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162725] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.162758] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162790] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.162822] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.162857] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.162890] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.162923] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.162999] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.163000] vgaarb: loaded
[ 0.163001] vgaarb: bridge control possible 0000:01:00.0
[ 0.163128] SCSI subsystem initialized
[ 0.163130] ACPI: bus type scsi registered
[ 0.163161] libata version 3.00 loaded.
[ 0.163178] ACPI: bus type usb registered
[ 0.163190] usbcore: registered new interface driver usbfs
[ 0.163198] usbcore: registered new interface driver hub
[ 0.163217] usbcore: registered new device driver usb
[ 0.163282] PCI: Using ACPI for IRQ routing
[ 0.164863] PCI: pci_cache_line_size set to 64 bytes
[ 0.164906] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.164907] e820: reserve RAM buffer [mem 0xdd7ba000-0xdfffffff]
[ 0.164909] e820: reserve RAM buffer [mem 0xde0fe000-0xdfffffff]
[ 0.164911] e820: reserve RAM buffer [mem 0xde980000-0xdfffffff]
[ 0.164912] e820: reserve RAM buffer [mem 0xdf419000-0xdfffffff]
[ 0.164913] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.164914] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.164983] NetLabel: Initializing
[ 0.164984] NetLabel: domain hash size = 128
[ 0.164985] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.164992] NetLabel: unlabeled traffic allowed by default
[ 0.165049] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.165054] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.167061] Switching to clocksource hpet
[ 0.170947] AppArmor: AppArmor Filesystem Enabled
[ 0.170967] pnp: PnP ACPI init
[ 0.170978] ACPI: bus type pnp registered
[ 0.171049] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.171052] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.171069] pnp 00:01: [dma 4]
[ 0.171082] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.171097] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.171174] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.171206] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.171208] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.171209] system 00:04: [io 0xffff] has been reserved
[ 0.171211] system 00:04: [io 0xffff] has been reserved
[ 0.171213] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.171214] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.171216] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.171217] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.171220] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171241] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.171277] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.171280] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.171339] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.171341] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171441] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.171444] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171462] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.171676] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.171678] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.171680] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.171682] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.171685] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.171686] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.171688] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.171690] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.171691] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.171693] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.171695] system 00:0a: [mem 0xe0000000-0xe0000fff] has been reserved
[ 0.171697] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171806] pnp: PnP ACPI: found 11 devices
[ 0.171807] ACPI: ACPI bus type pnp unregistered
[ 0.177338] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.177341] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.177344] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.177346] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.177349] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.177361] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.177363] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.177370] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.177394] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.177395] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.177397] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.177398] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.177400] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.177401] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.177403] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.177404] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.177406] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.177407] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.177409] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.177410] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.177412] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.177414] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.177415] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.177440] NET: Registered protocol family 2
[ 0.177555] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.177641] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.177700] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.177715] TCP: reno registered
[ 0.177723] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.177736] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.177779] NET: Registered protocol family 1
[ 0.215015] pci 0000:01:00.0: Boot video device
[ 0.215029] PCI: CLS 64 bytes, default 64
[ 0.215070] Trying to unpack rootfs image as initramfs...
[ 0.443511] Freeing initrd memory: 16216k freed
[ 0.445226] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.445229] software IO TLB [mem 0xd97ba000-0xdd7ba000] (64MB) mapped at [ffff8800d97ba000-ffff8800dd7b9fff]
[ 0.445496] Initialise module verification
[ 0.445528] audit: initializing netlink socket (disabled)
[ 0.445537] type=2000 audit(1386002624.444:1): initialized
[ 0.472608] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.473642] VFS: Disk quotas dquot_6.5.2
[ 0.473671] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.473982] fuse init (API version 7.20)
[ 0.474037] msgmni has been set to 7812
[ 0.474255] Key type asymmetric registered
[ 0.474257] Asymmetric key parser 'x509' registered
[ 0.474280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.474299] io scheduler noop registered
[ 0.474300] io scheduler deadline registered (default)
[ 0.474305] io scheduler cfq registered
[ 0.474388] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.474515] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.474525] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.474556] intel_idle: MWAIT substates: 0x1120
[ 0.474558] intel_idle: v0.4 model 0x3A
[ 0.474558] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.474619] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.474623] ACPI: Power Button [PWRB]
[ 0.474647] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.474649] ACPI: Power Button [PWRF]
[ 0.474723] ACPI: Requesting acpi_cpufreq
[ 0.478078] GHES: HEST is not enabled!
[ 0.478131] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.479002] Linux agpgart interface v0.103
[ 0.479783] brd: module loaded
[ 0.480182] loop: module loaded
[ 0.480406] libphy: Fixed MDIO Bus: probed
[ 0.480445] tun: Universal TUN/TAP device driver, 1.6
[ 0.480446] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.480473] PPP generic driver version 2.4.2
[ 0.480496] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.480497] ehci-pci: EHCI PCI platform driver
[ 0.480528] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.480532] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.480536] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.480548] ehci-pci 0000:00:1a.0: debug port 2
[ 0.484441] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.484456] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7118000
[ 0.494466] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.494488] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.494491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.494493] usb usb1: Product: EHCI Host Controller
[ 0.494496] usb usb1: Manufacturer: Linux 3.8.0-33-generic ehci_hcd
[ 0.494498] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.494575] hub 1-0:1.0: USB hub found
[ 0.494578] hub 1-0:1.0: 2 ports detected
[ 0.494674] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.494676] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.494680] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.494691] ehci-pci 0000:00:1d.0: debug port 2
[ 0.498574] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.498585] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7117000
[ 0.510435] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.510450] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.510453] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.510455] usb usb2: Product: EHCI Host Controller
[ 0.510457] usb usb2: Manufacturer: Linux 3.8.0-33-generic ehci_hcd
[ 0.510459] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.510530] hub 2-0:1.0: USB hub found
[ 0.510533] hub 2-0:1.0: 2 ports detected
[ 0.510603] ehci-platform: EHCI generic platform driver
[ 0.510608] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.510617] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.510649] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.510652] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.510655] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.510731] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.510771] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 0.510811] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.510812] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.510814] usb usb3: Product: xHCI Host Controller
[ 0.510815] usb usb3: Manufacturer: Linux 3.8.0-33-generic xhci_hcd
[ 0.510816] usb usb3: SerialNumber: 0000:00:14.0
[ 0.510860] xHCI xhci_add_endpoint called for root hub
[ 0.510862] xHCI xhci_check_bandwidth called for root hub
[ 0.510876] hub 3-0:1.0: USB hub found
[ 0.510882] hub 3-0:1.0: 4 ports detected
[ 0.511095] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.511098] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.511114] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.511115] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.511116] usb usb4: Product: xHCI Host Controller
[ 0.511118] usb usb4: Manufacturer: Linux 3.8.0-33-generic xhci_hcd
[ 0.511119] usb usb4: SerialNumber: 0000:00:14.0
[ 0.511161] xHCI xhci_add_endpoint called for root hub
[ 0.511162] xHCI xhci_check_bandwidth called for root hub
[ 0.511174] hub 4-0:1.0: USB hub found
[ 0.511180] hub 4-0:1.0: 4 ports detected
[ 0.526461] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.529042] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.529047] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.529126] mousedev: PS/2 mouse device common for all mice
[ 0.529200] rtc_cmos 00:05: RTC can wake from S4
[ 0.529303] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.529328] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.529387] device-mapper: uevent: version 1.0.3
[ 0.529423] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.529449] cpuidle: using governor ladder
[ 0.529479] cpuidle: using governor menu
[ 0.529481] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.529482] EFI Variables Facility v0.08 2004-May-17
[ 0.529596] ashmem: initialized
[ 0.529679] TCP: cubic registered
[ 0.529744] NET: Registered protocol family 10
[ 0.529858] NET: Registered protocol family 17
[ 0.529865] Key type dns_resolver registered
[ 0.530013] Loading module verification certificates
[ 0.530755] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f18b7991d2384529679d61befc4fb536686c75e2'
[ 0.530765] registered taskstats version 1
[ 0.532394] Key type trusted registered
[ 0.533797] Key type encrypted registered
[ 0.535431] rtc_cmos 00:05: setting system clock to 2013-12-02 16:43:44 UTC (1386002624)
[ 0.535718] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.535720] EDD information not available.
[ 0.536982] Freeing unused kernel memory: 1016k freed
[ 0.537085] Write protecting the kernel read-only data: 12288k
[ 0.539267] Freeing unused kernel memory: 1008k freed
[ 0.541522] Freeing unused kernel memory: 1008k freed
[ 0.552671] udevd[96]: starting version 175
[ 0.563879] Disabling lock debugging due to kernel taint
[ 0.564033] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.564034] vesafb: scrolling: redraw
[ 0.564036] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.565054] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90004800000, using 3072k, total 3072k
[ 0.565130] Console: switching to colour frame buffer device 128x48
[ 0.566551] fb0: VESA VGA frame buffer device
[ 0.589623] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.589844] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[ 0.589990] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000064e000, bc:5f:f4:8a:1a:4c, XID 0c900800 IRQ 42
[ 0.589993] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.594081] ahci 0000:00:1f.2: version 3.0
[ 0.594127] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.606357] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[ 0.606361] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.606365] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.638499] scsi0 : ahci
[ 0.638553] scsi1 : ahci
[ 0.638589] scsi2 : ahci
[ 0.638629] scsi3 : ahci
[ 0.638666] scsi4 : ahci
[ 0.638702] scsi5 : ahci
[ 0.638757] ata1: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116100 irq 43
[ 0.638759] ata2: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116180 irq 43
[ 0.638761] ata3: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116200 irq 43
[ 0.638763] ata4: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116280 irq 43
[ 0.638764] ata5: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116300 irq 43
[ 0.638765] ata6: DUMMY
[ 0.805880] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.938015] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.938016] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.938166] hub 1-1:1.0: USB hub found
[ 0.938263] hub 1-1:1.0: 6 ports detected
[ 0.957601] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.957617] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.957633] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.957648] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.957665] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.958065] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.958068] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.958070] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.958341] ata1.00: ATA-9: SanDisk SDSSDRC032G, 2.0.0, max UDMA/133
[ 0.958342] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 0.958642] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.958644] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.958646] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.958782] ata1.00: configured for UDMA/133
[ 0.958866] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDRC0 2.0. PQ: 0 ANSI: 5
[ 0.958972] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.958997] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 0.959067] sd 0:0:0:0: [sda] Write Protect is off
[ 0.959069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.959081] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.959705] sda: sda1 sda2 < sda5 >
[ 0.959909] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.014044] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.014048] EXT4-fs (sda1): write access will be enabled during recovery
[ 1.049426] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.181556] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.181558] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.181944] hub 2-1:1.0: USB hub found
[ 1.182055] hub 2-1:1.0: 8 ports detected
[ 1.220646] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 1.220652] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 396757
[ 1.220700] EXT4-fs (sda1): 1 orphan inode deleted
[ 1.220701] EXT4-fs (sda1): recovery complete
[ 1.231187] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.253172] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.346871] usb 1-1.3: New USB device found, idVendor=2548, idProduct=1002
[ 1.346875] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.346876] usb 1-1.3: Product: USB-CEC Adapter
[ 1.346878] usb 1-1.3: Manufacturer: Pulse-Eight
[ 1.346879] usb 1-1.3: SerialNumber: v2 r8
[ 1.416865] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 1.419920] init: ureadahead main process (285) terminated with status 5
[ 1.440704] tsc: Refined TSC clocksource calibration: 2594.108 MHz
[ 1.440708] Switching to clocksource tsc
[ 1.524137] Adding 4145148k swap on /dev/sda5. Priority:-1 extents:1 across:4145148k SS
[ 1.525408] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=9271
[ 1.525411] usb 1-1.4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1.525413] usb 1-1.4: Product: USB2.0 WLAN
[ 1.525414] usb 1-1.4: Manufacturer: ATHEROS
[ 1.525416] usb 1-1.4: SerialNumber: 12345
[ 1.574752] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1.584649] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 1.591521] udevd[363]: starting version 175
[ 1.597150] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 1.690099] usb 2-1.5: New USB device found, idVendor=0471, idProduct=0815
[ 1.690103] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.690105] usb 2-1.5: Product: eHome Infrared Transceiver
[ 1.690107] usb 2-1.5: Manufacturer: Philips
[ 1.690108] usb 2-1.5: SerialNumber: PH00TYGW
[ 1.695622] [drm] Initialized drm 1.1.0 20060810
[ 1.696807] init: irexec main process (430) terminated with status 1
[ 1.696830] init: irexec main process ended, respawning
[ 1.700777] RPC: Registered named UNIX socket transport module.
[ 1.700780] RPC: Registered udp transport module.
[ 1.700781] RPC: Registered tcp transport module.
[ 1.700782] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.713231] lp: driver loaded but no devices found
[ 1.715294] FS-Cache: Loaded
[ 1.722848] FS-Cache: Netfs 'nfs' registered for caching
[ 1.760217] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.764351] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.784478] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 1.784484] ACPI: This conflict may cause random problems and system instability
[ 1.784486] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.784491] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 1.784494] ACPI: This conflict may cause random problems and system instability
[ 1.784495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.784496] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 1.784499] ACPI: This conflict may cause random problems and system instability
[ 1.784500] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.796882] mei 0000:00:16.0: setting latency timer to 64
[ 1.796936] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 1.994588] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x15
[ 1.997325] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device
[ 1.998128] usbcore: registered new interface driver cdc_acm
[ 1.998130] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.018053] nvidia: module license 'NVIDIA' taints kernel.
[ 2.024972] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.025198] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 2.025205] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.32 Wed Jun 19 15:51:20 PDT 2013
[ 2.033730] r8169 0000:03:00.0 eth0: link down
[ 2.033784] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.035787] usbcore: registered new interface driver usbhid
[ 2.035790] usbhid: USB HID core driver
[ 2.129851] cfg80211: Calling CRDA to update world regulatory domain
[ 2.311875] usb 1-1.4: ath9k_htc: Firmware htc_9271.fw requested
[ 2.311971] usbcore: registered new interface driver ath9k_htc
[ 2.389033] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x15
[ 2.401129] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.418678] input: Pulse-Eight USB-CEC Adapter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/input/input2
[ 2.434506] hid-generic 0003:2548:1002.0001: input,hidraw0: USB HID v1.10 Mouse [Pulse-Eight USB-CEC Adapter] on usb-0000:00:1a.0-1.3/input2
[ 2.447171] WARNING: You are using an experimental version of the media stack.
[ 2.447171] As the driver is backported to an older kernel, it doesn't offer
[ 2.447171] enough quality for its usage in production.
[ 2.447171] Use it with care.
[ 2.447171] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 2.447171] 6bf7861fa2bb4be3cc70a6e9aed664ce65270027 [media] si476x: Fix some config dependencies and a compile warnings
[ 2.447171] b0efc3ed0530b08e9e1cba5f63e9c251ca3d7428 [media] m920x: Fix uninitialized variable warning
[ 2.447171] 46f85978687152c53a69fc06951e386f194e7f5d [media] em28xx: fix typo in scale_to_size()
[ 2.468175] cfg80211: World regulatory domain updated:
[ 2.468179] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.468180] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.468182] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.468183] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.468184] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.468185] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.490194] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 2.490988] Registered IR keymap rc-rc6-mce
[ 2.491163] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/rc/rc0/input3
[ 2.491230] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/rc/rc0
[ 2.492825] IR NEC protocol handler initialized
[ 2.493422] IR RC5(x) protocol handler initialized
[ 2.495916] IR JVC protocol handler initialized
[ 2.497322] IR RC6 protocol handler initialized
[ 2.498653] IR Sony protocol handler initialized
[ 2.502462] IR SANYO protocol handler initialized
[ 2.503311] IR MCE Keyboard/mouse protocol handler initialized
[ 2.509029] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input4
[ 2.513696] lirc_dev: IR Remote Control driver registered, major 250
[ 2.514945] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 2.514947] IR LIRC bridge handler initialized
[ 2.521333] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 2.521431] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.521508] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.521582] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.521659] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.521935] hda_intel: Disabling MSI
[ 2.521941] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 2.595889] usb 1-1.4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 2.682364] mceusb 2-1.5:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
[ 2.682368] mceusb 2-1.5:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)
[ 2.682395] usbcore: registered new interface driver mceusb
[ 2.860259] input: lircd as /devices/virtual/input/input10
[ 2.930002] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 2.930132] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 3.194505] ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
[ 3.378135] NVRM: Your system is not currently configured to drive a VGA console
[ 3.378138] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 3.378140] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 3.378141] NVRM: drivers including, but not limited to, vesafb, may result in
[ 3.378142] NVRM: corruption and stability problems, and is not supported.
[ 3.392411] ath9k_htc 1-1.4:1.0: ath9k_htc: FW Version: 1.3
[ 3.392415] ath: EEPROM regdomain: 0x809c
[ 3.392416] ath: EEPROM indicates we should expect a country code
[ 3.392417] ath: doing EEPROM country->regdmn map search
[ 3.392418] ath: country maps to regdmn code: 0x52
[ 3.392419] ath: Country alpha2 being used: CN
[ 3.392420] ath: Regpair used: 0x52
[ 3.399380] ieee80211 phy0: Atheros AR9271 Rev:1
[ 3.399397] cfg80211: Calling CRDA for country: CN
[ 3.409292] cfg80211: Regulatory domain changed to country: CN
[ 3.409295] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.409297] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.409298] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 3.532889] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.563144] wlan0: authenticate with 90:f6:52:f2:91:95
[ 4.656289] wlan0: send auth to 90:f6:52:f2:91:95 (try 1/3)
[ 4.658390] wlan0: authenticated
[ 4.658635] wlan0: associate with 90:f6:52:f2:91:95 (try 1/3)
[ 4.662502] wlan0: RX AssocResp from 90:f6:52:f2:91:95 (capab=0x431 status=0 aid=3)
[ 4.666486] wlan0: associated
[ 4.666503] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6.781747] init: wait-for-job-state (vdr-frontendvdr) main process (1198) killed by TERM signal
[ 16.803821] usb 2-1.6: device descriptor read/64, error -110
[ 27.646256] init: failsafe main process (860) killed by TERM signal
[ 27.825089] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 27.825428] NFSD: starting 90-second grace period (net ffffffff81cbb1c0)
[ 27.953802] init: plymouth-stop pre-start process (2039) terminated with status 1
[ 31.951362] usb 2-1.6: device descriptor read/64, error -110
[ 32.127051] usb 2-1.6: new high-speed USB device number 5 using ehci-pci
[ 47.175882] usb 2-1.6: device descriptor read/64, error -110
[ 58.896012] hub 2-1:1.0: unable to enumerate USB device on port 6
[ 61.256431] usb 2-1.6: new high-speed USB device number 6 using ehci-pci
[ 61.349127] usb 2-1.6: New USB device found, idVendor=0b48, idProduct=3011
[ 61.349131] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 61.349134] usb 2-1.6: Product: TechnoTrend USB2.0
[ 61.349136] usb 2-1.6: Manufacturer: Jactek
[ 61.349139] usb 2-1.6: SerialNumber: 000000031
[ 61.359203] WARNING: You are using an experimental version of the media stack.
[ 61.359203] As the driver is backported to an older kernel, it doesn't offer
[ 61.359203] enough quality for its usage in production.
[ 61.359203] Use it with care.
[ 61.359203] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 61.359203] 6bf7861fa2bb4be3cc70a6e9aed664ce65270027 [media] si476x: Fix some config dependencies and a compile warnings
[ 61.359203] b0efc3ed0530b08e9e1cba5f63e9c251ca3d7428 [media] m920x: Fix uninitialized variable warning
[ 61.359203] 46f85978687152c53a69fc06951e386f194e7f5d [media] em28xx: fix typo in scale_to_size()
[ 61.362520] dw2102: su3000_identify_state
[ 61.362520]
[ 61.362525] dvb-usb: found a 'TT Connect S2 4600' in warm state.
[ 61.362531] dw2102: su3000_power_ctrl: 1, initialized 0
[ 61.362531]
[ 61.363163] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 61.363479] DVB: registering new adapter (TT Connect S2 4600)
[ 61.367963] bc ea 2b 46 0e 7a
[ 61.367970] dvb-usb: MAC address: bc:ea:2b:46:0e:7a
[ 61.678252] Chip ID != [DS300X]! Not supported by this module
[ 61.682869] Chip ID = [DS3103]!
[ 61.682873] DS3103 chip version: 0.208 attached.
[ 61.701228] dw2102: Attached DS3103/TS2022!
[ 61.701228]
[ 61.701238] usb 2-1.6: DVB: registering adapter 0 frontend 0 (Montage Technology DS3103/TS2022)...
[ 61.702172] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/input/input13
[ 61.703009] dvb-usb: schedule remote query interval to 250 msecs.
[ 61.703014] dw2102: su3000_power_ctrl: 0, initialized 1
[ 61.703014]
[ 61.703017] dvb-usb: TT Connect S2 4600 successfully initialized and connected.
[ 61.703039] usbcore: registered new interface driver dw2102
[ 70.942838] init: vdr-frontend main process (1554) killed by TERM signal
[ 72.482264] vdr[2265]: segfault at 7fcce5ead0d4 ip 00007fcce5ead0d4 sp 00007fcc82810ea0 error 14 in ISO8859-9.so[7fcce6995000+2000]
[ 72.498239] init: vdr main process (1243) killed by SEGV signal
[ 72.653302] dw2102: su3000_power_ctrl: 1, initialized 1
[ 72.653302]
[ 72.662274] ds3103_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[ 72.662714] ds3103_firmware_ondemand: Waiting for firmware upload(2)...
[ 76.727059] ts2022_set_params: offset -72khz
[ 76.727064] ts2022_set_params: 1082000khz 1081928khz
[ 101.952278] ts2022_set_params: offset -643khz
[ 101.952282] ts2022_set_params: 1314000khz 1313357khzGrüße 