xineliboutput Plugin streamt nur HD Programme, keine SD und keine Aufnahmen

  • Hallo,


    ich kämpfe num schon 2 Tage mit dem xineliboutput plugin, aber es gehen nur HD Programme. Normale Programme und Aufnahmen gehen nicht, weder mit Mplayer noch mittels VLC (beides neuste Versionen, Windows Clients).
    Ich habe VDR 2.0.0 mit neustem xineliboutput plugin installiert. Hardware: 4-Fach Sat Karte und eine FF-Karte (kein HD).


    Beim Starten eines HD Programms kommt folgender Log:
    2013-08-14T17:37:09.499525+02:00 server2 vdr: [2275] [xine..put] Client connection 0 closed
    2013-08-14T17:37:09.570830+02:00 server2 vdr: [2275] [xine..put] Closing connection 0
    2013-08-14T17:37:09.573923+02:00 server2 vdr: [2275] [xine..put] Client 0 connected: 192.168.0.1:51401
    2013-08-14T17:37:09.573940+02:00 server2 vdr: [2275] loading /etc/vdr/plugins/xineliboutput/allowed_hosts.conf
    2013-08-14T17:37:09.573948+02:00 server2 vdr: [2275] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262144 bytes
    2013-08-14T17:37:09.573956+02:00 server2 vdr: [2275] [xine..put] HTTP request: GET / HTTP/1.1
    2013-08-14T17:37:09.573963+02:00 server2 vdr: [2275] [xine..put] HTTP(0): Host: server2:37890
    2013-08-14T17:37:09.574261+02:00 server2 vdr: [2275] [xine..put] HTTP(0): User-Agent: VLC/2.0.8 LibVLC/2.0.8
    2013-08-14T17:37:09.575519+02:00 server2 vdr: [2275] [xine..put] HTTP(0): Range: bytes=0-
    2013-08-14T17:37:09.576295+02:00 server2 vdr: [2275] [xine..put] HTTP(0): Connection: close
    2013-08-14T17:37:09.577096+02:00 server2 vdr: [2275] [xine..put] HTTP(0): Icy-MetaData: 1
    2013-08-14T17:37:09.577936+02:00 server2 vdr: [2275] [xine..put] HTTP(0):
    2013-08-14T17:37:09.578725+02:00 server2 vdr: [2275] [xine..put] HTTP Request complete
    2013-08-14T17:37:09.579526+02:00 server2 vdr: [2275] [xine..put] HTTP streaming primary device feed
    2013-08-14T17:37:09.580187+02:00 server2 vdr: [2275] [xine..put] cBackgroundWriterI initialized (buffer 1024 kb)
    2013-08-14T17:37:09.580856+02:00 server2 vdr: [2275] [xine..put] cRawWriter initialized (buffer 1024 kb)
    2013-08-14T17:37:10.293567+02:00 server2 vdr: [2107] [xine..put] Restoring original primary device 5
    2013-08-14T17:37:10.294434+02:00 server2 vdr: [2107] setting primary device to 5
    2013-08-14T17:37:10.296441+02:00 server2 vdr: [2107] [xine..put] cXinelibOsdProvider: shutting down !
    2013-08-14T17:37:10.296466+02:00 server2 vdr: [2107] switching to channel 97
    2013-08-14T17:37:10.386445+02:00 server2 vdr: [1041] TS buffer on device 1 thread ended (pid=2107, tid=1041)
    2013-08-14T17:37:10.392538+02:00 server2 vdr: [1040] buffer stats: 166192 (3%) used
    2013-08-14T17:37:10.393140+02:00 server2 vdr: [1040] receiver on device 1 thread ended (pid=2107, tid=1040)
    2013-08-14T17:37:10.416686+02:00 server2 vdr: [1064] receiver on device 1 thread started (pid=2107, tid=1064, prio=high)
    2013-08-14T17:37:10.418046+02:00 server2 vdr: [2107] [xine..put] Forcing primary device, original index = 5
    2013-08-14T17:37:10.418815+02:00 server2 vdr: [1064] receiver on device 1 thread ended (pid=2107, tid=1064)
    2013-08-14T17:37:10.420771+02:00 server2 vdr: [2107] setting primary device to 6
    2013-08-14T17:37:10.420824+02:00 server2 vdr: [2107] switching to channel 97
    2013-08-14T17:37:10.421020+02:00 server2 vdr: [1065] receiver on device 1 thread started (pid=2107, tid=1065, prio=high)
    2013-08-14T17:37:10.421719+02:00 server2 vdr: [1066] TS buffer on device 1 thread started (pid=2107, tid=1066, prio=high)
    2013-08-14T17:37:11.050229+02:00 server2 vdr: [2171] frontend 2/0 timed out while tuning to channel 1607, tp 211117
    2013-08-14T17:37:12.132656+02:00 server2 vdr: [1065] [xine..put] H.264: Found NAL SPS at offset 6/156
    2013-08-14T17:37:12.133576+02:00 server2 vdr: [1065] [xine..put] H.264 SPS: profile_idc 100
    2013-08-14T17:37:12.134229+02:00 server2 vdr: [1065] [xine..put] H.264 SPS: pic_width: 80 mbs
    2013-08-14T17:37:12.134890+02:00 server2 vdr: [1065] [xine..put] H.264 SPS: pic_height: 45 mbs
    2013-08-14T17:37:12.135529+02:00 server2 vdr: [1065] [xine..put] H.264 SPS: frame only flag: 1
    2013-08-14T17:37:12.136160+02:00 server2 vdr: [1065] [xine..put] H.264 SPS: aspect_ratio_idc 1
    2013-08-14T17:37:12.136823+02:00 server2 vdr: [1065] [xine..put] H.264 SPS: -> aspect ratio 1 / 1
    2013-08-14T17:37:12.137500+02:00 server2 vdr: [1065] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1
    2013-08-14T17:37:12.138148+02:00 server2 vdr: [1065] [xine..put] Detected video size 1280x720


    Beim Starten eines SD Programms kommt folgender Log:
    2013-08-14T17:34:39.279559+02:00 server2 vdr: [2275] [xine..put] Client connection 0 closed
    2013-08-14T17:34:39.299755+02:00 server2 vdr: [2275] [xine..put] Closing connection 0
    2013-08-14T17:34:39.916814+02:00 server2 vdr: [2275] [xine..put] Client 0 connected: 192.168.0.1:51351
    2013-08-14T17:34:39.917989+02:00 server2 vdr: [2275] loading /etc/vdr/plugins/xineliboutput/allowed_hosts.conf
    2013-08-14T17:34:39.918796+02:00 server2 vdr: [2275] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262144 bytes
    2013-08-14T17:34:39.919266+02:00 server2 vdr: [2275] [xine..put] HTTP request: GET / HTTP/1.1
    2013-08-14T17:34:39.920198+02:00 server2 vdr: [2275] [xine..put] HTTP(0): Host: server2:37890
    2013-08-14T17:34:39.920920+02:00 server2 vdr: [2275] [xine..put] HTTP(0): User-Agent: VLC/2.0.8 LibVLC/2.0.8
    2013-08-14T17:34:39.921375+02:00 server2 vdr: [2275] [xine..put] HTTP(0): Range: bytes=0-
    2013-08-14T17:34:39.921831+02:00 server2 vdr: [2275] [xine..put] HTTP(0): Connection: close
    2013-08-14T17:34:39.922313+02:00 server2 vdr: [2275] [xine..put] HTTP(0): Icy-MetaData: 1
    2013-08-14T17:34:39.922766+02:00 server2 vdr: [2275] [xine..put] HTTP(0):
    2013-08-14T17:34:39.923227+02:00 server2 vdr: [2275] [xine..put] HTTP Request complete
    2013-08-14T17:34:39.923643+02:00 server2 vdr: [2275] [xine..put] HTTP streaming primary device feed
    2013-08-14T17:34:39.924047+02:00 server2 vdr: [2275] [xine..put] cBackgroundWriterI initialized (buffer 1024 kb)
    2013-08-14T17:34:39.924445+02:00 server2 vdr: [2275] [xine..put] cRawWriter initialized (buffer 1024 kb)
    2013-08-14T17:34:40.125831+02:00 server2 vdr: [2107] [xine..put] Restoring original primary device 5
    2013-08-14T17:34:40.134919+02:00 server2 vdr: [2107] setting primary device to 5
    2013-08-14T17:34:40.135547+02:00 server2 vdr: [2107] [xine..put] cXinelibOsdProvider: shutting down !
    2013-08-14T17:34:40.137812+02:00 server2 vdr: [2107] switching to channel 1
    2013-08-14T17:34:40.138394+02:00 server2 vdr: [891] receiver on device 1 thread started (pid=2107, tid=891, prio=high)
    2013-08-14T17:34:40.139457+02:00 server2 vdr: [2107] [xine..put] Forcing primary device, original index = 5
    2013-08-14T17:34:40.140089+02:00 server2 vdr: [2107] setting primary device to 6
    2013-08-14T17:34:40.140659+02:00 server2 vdr: [2107] switching to channel 1
    2013-08-14T17:34:40.141142+02:00 server2 vdr: [891] receiver on device 1 thread ended (pid=2107, tid=891)
    2013-08-14T17:34:40.239978+02:00 server2 vdr: [615] TS buffer on device 5 thread ended (pid=2107, tid=615)
    2013-08-14T17:34:40.242815+02:00 server2 vdr: [614] buffer stats: 0 (0%) used
    2013-08-14T17:34:40.242832+02:00 server2 vdr: [614] receiver on device 5 thread ended (pid=2107, tid=614)
    2013-08-14T17:34:40.242841+02:00 server2 vdr: [892] receiver on device 5 thread started (pid=2107, tid=892, prio=high)
    2013-08-14T17:34:40.243743+02:00 server2 vdr: [893] TS buffer on device 5 thread started (pid=2107, tid=893, prio=high)


    hat jemand eine Idee woran es liegen könnte?

  • Hallo,




    habe das Problem teilweise gelöst. Ich habe in meinem Rechner u.a. eine FF-Karte
    (nur SD) verbaut die aber kein Sat Kabel hat. Hatte deshalb das Plugin
    dvbsddevice mit der Option "--outputonly" gestartet. Diese scheint aber
    nicht zu funktionieren da die Karte trotzdem ausgewählt wird. Ich hatte
    im Portal dann einen Patch gefunden der dies macht. Leider hält sich das
    xineliboutput Plugin weder an den Patch noch an die Option und versucht
    sobalt ein Sender ausgewählt wird diesen von dieser Karte zu holen,
    was natürlich nicht geht. Aufnahmen habe ich immer noch nicht zum laufen
    gebracht.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!