Habe ein Wohnzimmer VDR mit yaVDR 0.5 aufgesetzt.
Nachdem das Starten mit einer PS3-Remote nicht geht habe ich jetzt zwei Fernbedienungen für vor der Kiste eine Philips TV am ATRIC und für die Ferne eine PS3.
Philips FB via irrecord angelernt und lircd.conf erstellt - namespace hab ich danach angepasst. /etc/lirc/lircd.conf den include gemacht. Funktioniert alles prächtig soweit.
Ist das die richtige Vorgehensweise? Oder macht man das mit eventlirc/map (heute) Eleganter?
Code
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.9.0(default) on Sat Apr 6 22:21:23 2013
#
# contributed by
#
# brand: Philips TV Remote
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
name /etc/lircd_philips.conf
bits 8
flags RC6|CONST_LENGTH
eps 30
aeps 100
header 2663 870
one 457 433
zero 457 433
pre_data_bits 13
pre_data 0xEFF
gap 105793
toggle_bit_mask 0x10000
rc6_mask 0x10000
begin codes
KEY_POWER2 0xF3 # Power
KEY_PROG2 0xC7 # Source
KEY_TEXT 0xC3 # Teletext
KEY_MODE 0xA2 # 1/2
KEY_SUBTITLE 0xB4 # Subtitle
KEY_SCREEN 0x0A # Scale Video
KEY_RED 0x92 # Red
KEY_GREEN 0x91 # Green
KEY_YELLOW 0x90 # Yellow
KEY_BLUE 0x8F # Blue
KEY_EPG 0x33 # EPG
KEY_INFO 0xF0 # Info
KEY_MENU 0xAB # Menu
KEY_BACK 0xBF # Option
KEY_OK 0xA3 # OK
KEY_UP 0xA7 # Up-Cross
KEY_DOWN 0xA6 # Down-Cross
KEY_LEFT 0xA5 # Left-Cross
KEY_RIGHT 0xA4 # Right-Cross
KEY_VOLUMEUP 0xEF # Volume +
KEY_VOLUMEDOWN 0xEE # Volume -
KEY_MUTE 0xF2 # Mute
KEY_CHANNELUP 0xDF # Channel +
KEY_CHANNELDOWN 0xDE # Channel -
KEY_1 0xFE # 1
KEY_2 0xFD # 2
KEY_3 0xFC # 3
KEY_4 0xFB # 4
KEY_5 0xFA # 5
KEY_6 0xF9 # 6
KEY_7 0xF8 # 7
KEY_8 0xF7 # 8
KEY_9 0xF6 # 9
KEY_0 0xFF # 0
KEY_PREVIOUS 0xF5 # P-P
KEY_PROG3 0xCE # MHEG Chancel
end codes
end remote
Alles anzeigen