lirc keymaps and xbox360remote

  • i have a nuvoton-cir IR receiver and i trying to use xbox360 remote IR


    the problem is that some keys on the remote don't work but the key are presente in keymaps end evtest show me the key


    for example:
    the keymap used is /lib/udev/rc_keymaps/rc-rc6-mce


    if i lunch evest and try original remote button 5 i obtain this:

    Code
    1. Event: time 1364581375.337837, type 4 (EV_MSC), code 4 (MSC_SCAN), value 800f0405
    2. Event: time 1364581375.337848, type 1 (EV_KEY), code 6 (KEY_5), value 1
    3. Event: time 1364581375.337849, -------------- SYN_REPORT ------------
    4. Event: time 1364581375.460884, type 4 (EV_MSC), code 4 (MSC_SCAN), value 800f0405
    5. Event: time 1364581375.460887, -------------- SYN_REPORT ------------
    6. Event: time 1364581375.711343, type 1 (EV_KEY), code 6 (KEY_5), value 0
    7. Event: time 1364581375.711345, -------------- SYN_REPORT ------------


    but with xbox360 remote i obtain this:

    Code
    1. Event: time 1364581422.102302, type 4 (EV_MSC), code 4 (MSC_SCAN), value 800f7405
    2. Event: time 1364581422.102306, -------------- SYN_REPORT ------------
    3. Event: time 1364581422.224844, type 4 (EV_MSC), code 4 (MSC_SCAN), value 800f7405
    4. Event: time 1364581422.224848, -------------- SYN_REPORT ------------


    the VALUE is the same and mapped in rc-rc6-mce, only some button (volume up, volume down, mute, input, power down, button 1) work corretly...


    if i see the event with evtest i suppose that i can configure this button for work correctly, but i don't know how can do that...


    can you help me??

  • if i see the event with evtest i suppose that i can configure this button for work correctly, but i don't know how can do that...


    can you help me??


    There is a whole chapter about it in our documentation: http://www.yavdr.org/documentation/0.5/en/ch03s03.html - including a subchapter about ir-keytable


    Also nuvoton-cir receivers are not used as a lirc devices in yaVDR 0.5. They have to be configured with ir-keytable. An example keytable for the xbox remote might look like this: http://www.vdr-portal.de/index.php?page=Attachment&attachmentID=29503

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)