hdparm kommt mit einer meiner ext. USB-Platten offenbar nicht klar:
Code
hdparm -S 60 /dev/sdb
/dev/sdb:
setting standby to 60 (5 minutes)
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 15 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Entsprechend geht die Platte nicht in den Standby, obwohl angeblich doch (Platte dreht aber 'spürbar' weiter):
Code
hdparm -C /dev/sdb
/dev/sdb:
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 15 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
drive state is: standby
Das Ganze unter Ubuntu 12.04. Die Platte steckt in einem Revoltec-Gehäuse, ohne weitere Aufschriften. Und
Code
hdparm -I /dev/sdb
/dev/sdb:
SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ATA device, with non-removable media
Standards:
Likely used: 1
Configuration:
Logical max current
cylinders 0 0
heads 0 0
sectors/track 0 0
--
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 0 MBytes
device size with M = 1000*1000: 0 MBytes
cache/buffer size = unknown
Capabilities:
IORDY not likely
Cannot perform double-word IO
R/W multiple sector transfer: not supported
DMA: not supported
PIO: pio0
Alles anzeigen
ist auch nicht sehr aussagekräftig...