YaVDR Einstellungen bei Kaskade, kein Bild

Hallo,

ich hab mir nun auch den YaVDR zugelegt und versuche ihn zum laufen zu bekommen.
Leider bekomme ich kein Bild und ich vermute, dass dies an der Kaskade liegt.

Zu Meinem System ich Hab in der Oberen Etage einen Multischalter von Astro 4Kabel rein, 4Kabel raus mit Spannungsversorgung an dem kann ich die Dämpfung einstellen und Spannung für den LNB (12V,18V,22kHz).
Dann ist in der oberen Etage noch eine Kaskadenschalter/Multischalter (Wenn man den so nennt) 4 Kabel rein, 4 Kabel raus für den nächsten in der unteren Etage. An dem Kaskadenschalter in der oberen Etage sind ebenso seitlich 4 Abgänge für Endgeräte.
In der unteren Etage befindet sich der nächste Schalter, 4 Kabel rein, 4 Abschlusswiderstände am Abgang. Seitlich wie oben 4 Abgänge für Endgeräte.

Meine wenigkeit hängt in der unteren Etage an dem Schalter und daran mein VDR.

Nun mehrere Fragen.
Zum einen, muss ich die Spannung/Frequenz an dem Haupt-Multischalter für den LNB ändern/einstellen?
(Steht momentan auf 18V und es hatte mit meinen Receivern (Humax icord und Technisat HD S2 Plus) einwandfrei funktioniert)

Zum anderen bekomme ich in meinem VDR kein Bild. Über den Receiver jedoch schon. Ich hatte vermutet, dass dies an der Kaskade liegt aber ich finde keine Einstellungen diesbezüglich.

Vielleicht hat auch jemand das gleiche Problem gehabt, jedoch finde ich weder im Forum noch in der Hilfe etwas hierzu.

Hoffe ihr reisst mir nicht den Kopf ab und könnt mir was weiterhelfen

Vielen Dank schonmal

Bei meinem Receiver war DiSEqC eingeschaltet.
Ich hatte auch versucht das im VDR zu tun... leider ohne Erfolg.
Trotzdem werd ich das nachher nochmal versuchen in allen Variationen.

Könnte es vielleicht ein Problem mit der Speisespannung der Karte (TeVii s480) und der Versorgungsspannung des LNB zu tun haben?
Läuft ja eigentlich alles über den Haupt-Multischalter....

Hat leider nicht funktioniert... für weitere ideen bin ich offen =)

Zitat von hepi

?

Wo find ich die dmsg ?
Und ja ist eine Dual Tuner karte und ja sind beide Kabel angeschlossen.

Der Arbeitskollege von mir meinte die Karte wird nicht richtig erkannt, weil bei den LNB einstellungen nur eine einzige option zur Verfügung steht und das wäre Disec Ja oder Nein.
Normalerweise würde da noch die auswahl der/des LNBs stehen....

Weiß jetz nur nicht was ich da weiter tun kann das er diese erkennt....
Hab YaVDR schon neu installiert.

So... die Sache schaut nun anders aus... ich hab den Steckplatz der Karte geändert und nun hab ich die Auswahl von Device 1 und Device 2 bekommen...

Device X angeschlossen an Sat-Kabel: eigenes (korrekt?)

Signalinfo:

STR: b798 (71%) BER: fffffffff Video: ---
SNR: Schwankend UNC 00000000 Audio ---

Wenn ich nun einmal nach Rechts drücke (Weiß halt nicht was dann passiert, weil ich den Kopf des Menüs nicht seh steht da:

STR:bb80 (73%) BER:fffffffff Video:schwankend in Mbit/s
SNR: e128 (88%) UNC: 000000000 Audio: 200kbit/s

So... neuer Status...

Ich hab bei DIenstprogramme auf Xterm gedrückt, danach ging das Menü nicht mehr, hab ihn dann manuell neugestartet.
Nun hab ich Bild aber in den LNB einstellungen sind keine Device mehr angezeigt...

Irgendwie is das alles seltsam

Zitat von hepi

Wie schon vor ein paar Tagen gesagt, im yaVDR Web-Frontend unter Diagnose nach jedem Boot mal in "dmesg" reinschauen, wie viele Tuner gefunden und mit Treibern versorgt worden sind.

Gruß
hepi

Ich weiß leider nicht wo ich im Webfronted die dmesg finde....

Nach erneutem neustart sind die Device wieder da....
ARD hakt ZDF läuft rtl pro7 etc läuft nicht

Meinst du die Kernel log?

Unter der Diagnosik finde ich keine log namens dmesg... nur System log dateien und die Kernel log welche,,,

0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (buildd@crested) (gcc
version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39-Ubuntu SMP Mon May 21
16:52:17 UTC 2012 (Ubuntu 3.2.0-24.39-generic 3.2.16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic
root=UUID=226c1f61-13d9-4923-b8a3-7413c0b73a32 ro vmalloc=256m quiet
splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfdf0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfdf0000 - 00000000bfdf1000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000bfdf1000 - 00000000bfe00000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000bff00000
(reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000
(reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd.
GA-880GA-UD3H/GA-880GA-UD3H, BIOS FGf 10/21/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3070M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 3 lose cover
RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC
[ 0.000000] e820 update range: 00000000bfe00000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4a60] f4a60
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size
20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfdf0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfc00000 page 2M
[ 0.000000] 00bfc00000 - 00bfdf0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfdf0000 @
1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 1G
[ 0.000000] kernel direct mapping tables up to 140000000 @
bfdef000-bfdf0000
[ 0.000000] RAMDISK: 36428000 - 3720c000
[ 0.000000] ACPI: RSDP 00000000000f64e0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000bfdf1000 00044 (v01 GBT GBTUACPI
42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000bfdf1080 00074 (v01 GBT GBTUACPI
42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000bfdf1100 076C4 (v01 GBT GBTUACPI
00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfdf0000 00040
[ 0.000000] ACPI: SSDT 00000000bfdf88c0 00472 (v01 PTLTD POWERNOW
00000001 LTP 00000001)
[ 0.000000] ACPI: MSDM 00000000bfdf8d40 00055 (v03 GBT GBTUACPI
42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 00000000bfdf8dc0 00038 (v01 GBT GBTUACPI
42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000bfdf8e00 0003C (v01 GBT GBTUACPI
42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000bfdf8e40 00034 (v01 GBT
00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000bfdf8eb0 00202 (v01 GBT GBT B0
5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000bfdf8800 000BC (v01 GBT GBTUACPI
42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD ->
[ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000bfdf0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1047931
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765488 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfdf0000 -
00000000bfdf1000
[ 0.000000] PM: Registered nosave memory: 00000000bfdf1000 -
00000000bfe00000
[ 0.000000] PM: Registered nosave memory: 00000000bfe00000 -
00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap:
bff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83072
r8192 d23424 u262144
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1027446
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic
root=UUID=226c1f61-13d9-4923-b8a3-7413c0b73a32 ro vmalloc=256m quiet
splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ fffe000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 -
00000000b8000000
[ 0.000000] Memory: 3963656k/5242880k available (6567k kernel code,
1051156k absent, 228068k reserved, 6636k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2008.813 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4017.62 BogoMIPS (lpj=8035252)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004038] Security Framework initialized
[ 0.004053] AppArmor: AppArmor initialized
[ 0.004055] Yama: becoming mindful.
[ 0.004512] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.005864] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.006440] Mount-cache hash table entries: 256
[ 0.006582] Initializing cgroup subsys cpuacct
[ 0.006589] Initializing cgroup subsys memory
[ 0.006598] Initializing cgroup subsys devices
[ 0.006600] Initializing cgroup subsys freezer
[ 0.006603] Initializing cgroup subsys blkio
[ 0.006609] Initializing cgroup subsys perf_event
[ 0.006640] tseg: 00bff00000
[ 0.006643] CPU: Physical Processor ID: 0
[ 0.006645] CPU: Processor Core ID: 0
[ 0.006647] mce: CPU supports 6 MCE banks
[ 0.006656] using AMD E400 aware idle routine
[ 0.009452] ACPI: Core revision 20110623
[ 0.016032] ftrace: allocating 27050 entries in 107 pages
[ 0.020536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060976] CPU0: AMD Athlon(tm) II X2 270u Processor stepping 03
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 96000
[ 0.008000] invalid opcode: 0000 [#1] SMP
[ 0.008000] CPU 1
[ 0.008000] Modules linked in:
[ 0.008000]
[ 0.008000] Pid: 0, comm: swapper/1 Not tainted 3.2.0-24-generic
#39-Ubuntu Gigabyte Technology Co., Ltd. GA-880GA-UD3H/GA-880GA-UD3H
[ 0.008000] RIP: 0010:[<ffffffff8163a854>]
[<ffffffff8163a854>] set_cpu_sibling_map+0x27c/0x344
[ 0.008000] RSP: 0000:ffff880138b1deb8 EFLAGS: 00010086
[ 0.008000] RAX: 000000000000da00 RBX: ffff88013fc53640 RCX:
0000000000000000
[ 0.008000] RDX: 0000000000013640 RSI: 0000000000000100 RDI:
0000000000000001
[ 0.008000] RBP: ffff880138b1df08 R08: 000000000000da20 R09:
0000000000000001
[ 0.008000] R10: 0000000000000006 R11: 0000000000000000 R12:
000000000000da40
[ 0.008000] R13: 0000000000000001 R14: 000000000000d9e0 R15:
0000000000000000
[ 0.008000] FS: 0000000000000000(0000) GS:ffff88013fc40000(0000)
knlGS:0000000000000000
[ 0.008000] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 0.008000] CR2: 0000000000000000 CR3: 0000000001c05000 CR4:
00000000000006e0
[ 0.008000] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 0.008000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 0.008000] Process swapper/1 (pid: 0, threadinfo ffff880138b1c000,
task ffff880138b216f0)
[ 0.008000] Stack:
[ 0.008000] 000000000000da00 0000000000000001 0000000000000000
0000000000013640
[ 0.008000] ffff88013fc53640 0000000000000001 0000000000000000
0000000000000000
[ 0.008000] 0000000000000000 0000000000000000 ffff880138b1df28
ffffffff8163aa2c
[ 0.008000] Call Trace:
[ 0.008000] [<ffffffff8163aa2c>] smp_callin+0x110/0x12c
[ 0.008000] [<ffffffff8163aa5a>] start_secondary+0x12/0xdb
[ 0.008000] [<ffffffff8163aa48>] ? smp_callin+0x12c/0x12c
[ 0.008000] Code: 48 8b 4d c0 48 8b 45 b0 44 89 ef 48 89 c6 48 03 34
cd a0 d7 cd 81 e8 e2 79 00 00 4c 8b 4d b8 49 c7 c0 20 da 00 00 be 00 01
00 00 <4c> 89 c7 4c 89 45 b8 4a 03 3c cd a0 d7 cd 81 e8 e8 0b ce
ff ff
[ 0.008000] RIP [<ffffffff8163a854>]
set_cpu_sibling_map+0x27c/0x344
[ 0.008000] RSP <ffff880138b1deb8>
[ 0.008000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.008000] Kernel panic - not syncing: Attempted to kill the idle
task!
[ 0.008000] Pid: 0, comm: swapper/1 Tainted: G D
3.2.0-24-generic #39-Ubuntu
[ 0.008000] Call Trace:
[ 0.008000] [<ffffffff8164434a>] panic+0x91/0x1a4
[ 0.008000] [<ffffffff8106bdde>] do_exit+0x41e/0x420
[ 0.008000] [<ffffffff8165d920>] oops_end+0xb0/0xf0
[ 0.008000] [<ffffffff810168d8>] die+0x58/0x90
[ 0.008000] [<ffffffff8165d294>] do_trap+0xc4/0x170
[ 0.008000] [<ffffffff81013f65>] do_invalid_op+0x95/0xb0
[ 0.008000] [<ffffffff8163a854>] ?
set_cpu_sibling_map+0x27c/0x344
[ 0.008000] [<ffffffff8102bfcb>] ?
mce_amd_feature_init+0x9b/0x260
[ 0.008000] [<ffffffff81666d6b>] invalid_op+0x1b/0x20
[ 0.008000] [<ffffffff8163a854>] ?
set_cpu_sibling_map+0x27c/0x344
[ 0.008000] [<ffffffff8163a844>] ?
set_cpu_sibling_map+0x26c/0x344
[ 0.008000] [<ffffffff8163aa2c>] smp_callin+0x110/0x12c
[ 0.008000] [<ffffffff8163aa5a>] start_secondary+0x12/0xdb
[ 0.008000] [<ffffffff8163aa48>] ? smp_callin+0x12c/0x12c
[ 5.047219] CPU1: Stuck ??
[ 5.047271] Brought up 1 CPUs
[ 5.047273] Total of 1 processors activated (4017.62 BogoMIPS).
[ 5.047799] devtmpfs: initialized
[ 5.049662] EVM: security.selinux
[ 5.049664] EVM: security.SMACK64
[ 5.049666] EVM: security.capability
[ 5.049693] PM: Registering ACPI NVS region at bfdf0000 (4096 bytes)
[ 5.050555] print_constraints: dummy:
[ 5.050579] RTC time: 14:12:20, date: 06/14/12
[ 5.050618] NET: Registered protocol family 16
[ 5.050723] node 0 link 0: io port [9000, ffff]
[ 5.050726] TOM: 00000000c0000000 aka 3072M
[ 5.050729] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 5.050732] node 0 link 0: mmio [a0000, bffff]
[ 5.050735] node 0 link 0: mmio [c0000000, dfffffff]
[ 5.050738] node 0 link 0: mmio [f0000000, fe02ffff]
[ 5.050741] node 0 link 0: mmio [e0000000, e06fffff] ==>
[e0100000, e06fffff]
[ 5.050745] TOM2: 0000000140000000 aka 5120M
[ 5.050748] bus: [00, 06] on node 0 link 0
[ 5.050750] bus: 00 index 0 [io 0x0000-0xffff]
[ 5.050752] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 5.050755] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[ 5.050757] bus: 00 index 3 [mem 0xe0700000-0xffffffff]
[ 5.050759] bus: 00 index 4 [mem 0xe0100000-0xe06fffff]
[ 5.050761] bus: 00 index 5 [mem 0x140000000-0xfcffffffff]
[ 5.050769] Extended Config Space enabled on 1 nodes
[ 5.050785] ACPI: bus type pci registered
[ 5.050850] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 5.050853] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
E820
[ 5.077175] PCI: Using configuration type 1 for base access
[ 5.078188] bio: create slab <bio-0> at 0
[ 5.078279] ACPI: Added _OSI(Module Device)
[ 5.078281] ACPI: Added _OSI(Processor Device)
[ 5.078283] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 5.078285] ACPI: Added _OSI(Processor Aggregator Device)
[ 5.079117] ACPI: EC: Look up EC in DSDT
[ 5.080111] ACPI: Actual Package length (1) is larger than
NumElements field (0), truncated
[ 5.080115]
[ 5.080120] ACPI: Actual Package length (1) is larger than
NumElements field (0), truncated
[ 5.080123]
[ 5.080149] ACPI: Actual Package length (1) is larger than
NumElements field (0), truncated
[ 5.080152]
[ 5.080157] ACPI: Actual Package length (1) is larger than
NumElements field (0), truncated
[ 5.080160]
[ 5.084447] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45,
should be 0x44 (20110623/tbutils-314)
[ 5.084588] ACPI: Interpreter enabled
[ 5.084594] ACPI: (supports S0 S3 S4 S5)
[ 5.084618] ACPI: Using IOAPIC for interrupt routing
[ 5.089758] ACPI: No dock devices found.
[ 5.089760] HEST: Table not found.
[ 5.089765] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 5.089827] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 5.089949] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7]
[ 5.089952] pci_root PNP0A03:00: host bridge window [io
0x0d00-0xffff]
[ 5.089956] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 5.089958] pci_root PNP0A03:00: host bridge window [mem
0x000c0000-0x000dffff]
[ 5.089961] pci_root PNP0A03:00: host bridge window [mem
0xc0000000-0xfebfffff]
[ 5.089977] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 5.089990] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff
64bit]
[ 5.090035] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[ 5.090071] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 5.090074] pci 0000:00:04.0: PME# disabled
[ 5.090092] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 5.090127] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 5.090130] pci 0000:00:09.0: PME# disabled
[ 5.090144] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 5.090178] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 5.090181] pci 0000:00:0a.0: PME# disabled
[ 5.090204] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 5.090221] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 5.090229] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 5.090238] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 5.090246] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 5.090255] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 5.090264] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 5.090312] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 5.090324] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 5.090384] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 5.090400] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
[ 5.090466] pci 0000:00:12.2: supports D1 D2
[ 5.090468] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 5.090472] pci 0000:00:12.2: PME# disabled
[ 5.090490] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 5.090501] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 5.090559] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 5.090575] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
[ 5.090641] pci 0000:00:13.2: supports D1 D2
[ 5.090643] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 5.090647] pci 0000:00:13.2: PME# disabled
[ 5.090665] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 5.090724] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 5.090736] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 5.090745] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 5.090753] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 5.090761] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 5.090770] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 5.090802] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 5.090820] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff
64bit]
[ 5.090873] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 5.090877] pci 0000:00:14.2: PME# disabled
[ 5.090888] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 5.090950] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 5.090985] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 5.090997] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 5.091054] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 5.091114] pci 0000:00:15.0: supports D1 D2
[ 5.091135] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 5.091194] pci 0000:00:15.1: supports D1 D2
[ 5.091217] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 5.091228] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
[ 5.091286] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 5.091302] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
[ 5.091368] pci 0000:00:16.2: supports D1 D2
[ 5.091370] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 5.091374] pci 0000:00:16.2: PME# disabled
[ 5.091391] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 5.091409] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 5.091423] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 5.091440] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 5.091458] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 5.091511] pci 0000:01:00.0: [10de:10c3] type 0 class 0x000300
[ 5.091523] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 5.091535] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff
64bit pref]
[ 5.091547] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff
64bit pref]
[ 5.091556] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 5.091565] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff
pref]
[ 5.091627] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 5.091639] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
[ 5.091740] System has AMD C1E enabled
[ 5.091752] Switch to broadcast mode on CPU0
[ 5.096353] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 5.096361] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 5.096365] pci 0000:00:04.0: bridge window [mem
0xfb000000-0xfcffffff]
[ 5.096369] pci 0000:00:04.0: bridge window [mem
0xc0000000-0xdfffffff 64bit pref]
[ 5.096413] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 5.096431] pci 0000:02:00.0: reg 10: [mem 0xfd6fe000-0xfd6fffff
64bit]
[ 5.096507] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 5.096511] pci 0000:02:00.0: PME# disabled
[ 5.104349] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 5.104356] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 5.104359] pci 0000:00:09.0: bridge window [mem
0xfd600000-0xfd6fffff]
[ 5.104364] pci 0000:00:09.0: bridge window [mem
0xfdf00000-0xfdffffff 64bit pref]
[ 5.104406] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 5.104421] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
[ 5.104442] pci 0000:03:00.0: reg 18: [mem 0xfd7ff000-0xfd7fffff
64bit pref]
[ 5.104456] pci 0000:03:00.0: reg 20: [mem 0xfd7f8000-0xfd7fbfff
64bit pref]
[ 5.104514] pci 0000:03:00.0: supports D1 D2
[ 5.104516] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 5.104521] pci 0000:03:00.0: PME# disabled
[ 5.112350] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 5.112357] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 5.112360] pci 0000:00:0a.0: bridge window [mem
0xfdc00000-0xfdcfffff]
[ 5.112364] pci 0000:00:0a.0: bridge window [mem
0xfd700000-0xfd7fffff 64bit pref]
[ 5.112410] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
[ 5.112431] pci 0000:04:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
[ 5.112443] pci 0000:04:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
[ 5.112524] pci 0000:04:0e.0: supports D1 D2
[ 5.112526] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 5.112532] pci 0000:04:0e.0: PME# disabled
[ 5.112562] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive
decode)
[ 5.112566] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 5.112570] pci 0000:00:14.4: bridge window [mem
0xfde00000-0xfdefffff]
[ 5.112574] pci 0000:00:14.4: bridge window [mem
0xfdd00000-0xfddfffff pref]
[ 5.112578] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 5.112580] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 5.112583] pci 0000:00:14.4: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 5.112586] pci 0000:00:14.4: bridge window [mem
0x000c0000-0x000dffff] (subtractive decode)
[ 5.112589] pci 0000:00:14.4: bridge window [mem
0xc0000000-0xfebfffff] (subtractive decode)
[ 5.112645] pci 0000:05:00.0: [197b:2363] type 0 class 0x000106
[ 5.112730] pci 0000:05:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
[ 5.112743] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff
pref]
[ 5.112793] pci 0000:05:00.0: PME# supported from D3hot
[ 5.112798] pci 0000:05:00.0: PME# disabled
[ 5.112833] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
[ 5.112856] pci 0000:05:00.1: reg 10: [io 0xaf00-0xaf07]
[ 5.112869] pci 0000:05:00.1: reg 14: [io 0xae00-0xae03]
[ 5.112883] pci 0000:05:00.1: reg 18: [io 0xad00-0xad07]
[ 5.112896] pci 0000:05:00.1: reg 1c: [io 0xac00-0xac03]
[ 5.112909] pci 0000:05:00.1: reg 20: [io 0xab00-0xab0f]
[ 5.112989] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
[ 5.113003] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 5.113008] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 5.113012] pci 0000:00:15.0: bridge window [mem
0xfdb00000-0xfdbfffff]
[ 5.113018] pci 0000:00:15.0: bridge window [mem
0xfda00000-0xfdafffff 64bit pref]
[ 5.113078] pci 0000:06:00.0: [9710:9990] type 0 class 0x000c03
[ 5.113097] pci 0000:06:00.0: reg 10: [mem 0xfd9ff000-0xfd9fffff]
[ 5.113231] pci 0000:06:00.0: supports D1 D2
[ 5.113233] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 5.113239] pci 0000:06:00.0: PME# disabled
[ 5.113280] pci 0000:06:00.1: [9710:9990] type 0 class 0x000c03
[ 5.113299] pci 0000:06:00.1: reg 10: [mem 0xfd9fe000-0xfd9fefff]
[ 5.113432] pci 0000:06:00.1: supports D1 D2
[ 5.113434] pci 0000:06:00.1: PME# supported from D0 D1 D2 D3hot
D3cold
[ 5.113440] pci 0000:06:00.1: PME# disabled
[ 5.113479] pci 0000:06:00.2: [9710:9990] type 0 class 0x000c03
[ 5.113499] pci 0000:06:00.2: reg 10: [mem 0xfd9fd000-0xfd9fdfff]
[ 5.113632] pci 0000:06:00.2: supports D1 D2
[ 5.113634] pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot
D3cold
[ 5.113640] pci 0000:06:00.2: PME# disabled
[ 5.113679] pci 0000:06:00.3: [9710:9990] type 0 class 0x000c03
[ 5.113698] pci 0000:06:00.3: reg 10: [mem 0xfd9fc000-0xfd9fcfff]
[ 5.113831] pci 0000:06:00.3: supports D1 D2
[ 5.113834] pci 0000:06:00.3: PME# supported from D0 D1 D2 D3hot
D3cold
[ 5.113839] pci 0000:06:00.3: PME# disabled
[ 5.113878] pci 0000:06:00.4: [9710:9990] type 0 class 0x000c03
[ 5.113898] pci 0000:06:00.4: reg 10: [mem 0xfd9fb000-0xfd9fbfff]
[ 5.114031] pci 0000:06:00.4: supports D1 D2
[ 5.114033] pci 0000:06:00.4: PME# supported from D0 D1 D2 D3hot
D3cold
[ 5.114039] pci 0000:06:00.4: PME# disabled
[ 5.114078] pci 0000:06:00.5: [9710:9990] type 0 class 0x000c03
[ 5.114097] pci 0000:06:00.5: reg 10: [mem 0xfd9fa000-0xfd9fafff]
[ 5.114232] pci 0000:06:00.5: supports D1 D2
[ 5.114235] pci 0000:06:00.5: PME# supported from D0 D1 D2 D3hot
D3cold
[ 5.114240] pci 0000:06:00.5: PME# disabled
[ 5.114279] pci 0000:06:00.6: [9710:9990] type 0 class 0x000c03
[ 5.114299] pci 0000:06:00.6: reg 10: [mem 0xfd9f9000-0xfd9f9fff]
[ 5.114432] pci 0000:06:00.6: supports D1 D2
[ 5.114434] pci 0000:06:00.6: PME# supported from D0 D1 D2 D3hot
D3cold
[ 5.114440] pci 0000:06:00.6: PME# disabled
[ 5.114480] pci 0000:06:00.7: [9710:9990] type 0 class 0x000c03
[ 5.114499] pci 0000:06:00.7: reg 10: [mem 0xfd9f8000-0xfd9f8fff]
[ 5.114632] pci 0000:06:00.7: supports D1 D2
[ 5.114635] pci 0000:06:00.7: PME# supported from D0 D1 D2 D3hot
D3cold
[ 5.114640] pci 0000:06:00.7: PME# disabled
[ 5.120390] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 5.120398] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 5.120402] pci 0000:00:15.1: bridge window [mem
0xfd900000-0xfd9fffff]
[ 5.120408] pci 0000:00:15.1: bridge window [mem
0xfd800000-0xfd8fffff 64bit pref]
[ 5.120433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 5.120696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 5.120727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 5.120764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 5.120833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 5.120865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 5.120892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 5.120923] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 5.120927] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND),
returned control mask: 0x1d
[ 5.120929] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 5.132785] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 5.132828] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 5.132867] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 5.132904] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 5.132941] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 5.132978] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 5.133015] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 5.133051] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 5.133174] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 5.133182] vgaarb: loaded
[ 5.133184] vgaarb: bridge control possible 0000:01:00.0
[ 5.133292] i2c-core: driver [aat2870] using legacy suspend method
[ 5.133294] i2c-core: driver [aat2870] using legacy resume method
[ 5.133364] SCSI subsystem initialized
[ 5.133411] libata version 3.00 loaded.
[ 5.133455] usbcore: registered new interface driver usbfs
[ 5.133466] usbcore: registered new interface driver hub
[ 5.133488] usbcore: registered new device driver usb
[ 5.133568] PCI: Using ACPI for IRQ routing
[ 5.140173] PCI: pci_cache_line_size set to 64 bytes
[ 5.140183] pci 0000:00:00.0: no compatible bridge window for [mem
0xe0000000-0xffffffff 64bit]
[ 5.140308] reserve RAM buffer: 000000000009b800 - 000000000009ffff
[ 5.140311] reserve RAM buffer: 00000000bfdf0000 - 00000000bfffffff
[ 5.140416] NetLabel: Initializing
[ 5.140418] NetLabel: domain hash size = 128
[ 5.140420] NetLabel: protocols = UNLABELED CIPSOv4
[ 5.140431] NetLabel: unlabeled traffic allowed by default
[ 5.140471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 5.140476] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 5.142525] Switching to clocksource hpet
[ 5.146876] AppArmor: AppArmor Filesystem Enabled
[ 5.146907] pnp: PnP ACPI init
[ 5.146926] ACPI: bus type pnp registered
[ 5.147027] pnp 00:00: [bus 00-ff]
[ 5.147030] pnp 00:00: [io 0x0cf8-0x0cff]
[ 5.147032] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 5.147035] pnp 00:00: [io 0x0d00-0xffff window]
[ 5.147038] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 5.147040] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 5.147043] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 5.147098] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03
(active)
[ 5.147109] pnp 00:01: [io 0x0010-0x001f]
[ 5.147111] pnp 00:01: [io 0x0022-0x003f]
[ 5.147113] pnp 00:01: [io 0x0044-0x005f]
[ 5.147116] pnp 00:01: [io 0x0062-0x0063]
[ 5.147118] pnp 00:01: [io 0x0065-0x006f]
[ 5.147120] pnp 00:01: [io 0x0074-0x007f]
[ 5.147122] pnp 00:01: [io 0x0091-0x0093]
[ 5.147127] pnp 00:01: [io 0x00a2-0x00bf]
[ 5.147129] pnp 00:01: [io 0x00e0-0x00ef]
[ 5.147131] pnp 00:01: [io 0x04d0-0x04d1]
[ 5.147133] pnp 00:01: [io 0x0220-0x0225]
[ 5.147135] pnp 00:01: [io 0x0290-0x0294]
[ 5.147209] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 5.147213] system 00:01: [io 0x0220-0x0225] has been reserved
[ 5.147216] system 00:01: [io 0x0290-0x0294] has been reserved
[ 5.147219] system 00:01: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 5.147463] pnp 00:02: [io 0x4100-0x411f]
[ 5.147466] pnp 00:02: [io 0x0228-0x022f]
[ 5.147468] pnp 00:02: [io 0x040b]
[ 5.147470] pnp 00:02: [io 0x04d6]
[ 5.147472] pnp 00:02: [io 0x0c00-0x0c01]
[ 5.147474] pnp 00:02: [io 0x0c14]
[ 5.147476] pnp 00:02: [io 0x0c50-0x0c52]
[ 5.147478] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 5.147480] pnp 00:02: [io 0x0c6f]
[ 5.147482] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 5.147484] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 5.147486] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 5.147488] pnp 00:02: [io 0x4000-0x40fe]
[ 5.147491] pnp 00:02: [io 0x4210-0x4217]
[ 5.147493] pnp 00:02: [io 0x0b00-0x0b0f]
[ 5.147495] pnp 00:02: [io 0x0b10-0x0b1f]
[ 5.147497] pnp 00:02: [io 0x0b20-0x0b3f]
[ 5.147500] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 5.147502] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 5.147508] pnp 00:02: disabling [mem 0x00000000-0x00000fff window]
because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 5.147540] pnp 00:02: disabling [mem 0x00000000-0x00000fff window
disabled] because it overlaps 0000:01:00.0 BAR 6 [mem
0x00000000-0x0007ffff pref]
[ 5.147550] pnp 00:02: disabling [mem 0x00000000-0x00000fff window
disabled] because it overlaps 0000:05:00.0 BAR 6 [mem
0x00000000-0x0000ffff pref]
[ 5.147591] system 00:02: [io 0x4100-0x411f] has been reserved
[ 5.147594] system 00:02: [io 0x0228-0x022f] has been reserved
[ 5.147597] system 00:02: [io 0x040b] has been reserved
[ 5.147600] system 00:02: [io 0x04d6] has been reserved
[ 5.147603] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 5.147606] system 00:02: [io 0x0c14] has been reserved
[ 5.147608] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 5.147611] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 5.147614] system 00:02: [io 0x0c6f] has been reserved
[ 5.147617] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 5.147619] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 5.147622] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 5.147625] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 5.147628] system 00:02: [io 0x4210-0x4217] has been reserved
[ 5.147631] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 5.147634] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 5.147638] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 5.147642] system 00:02: [mem 0xfee00400-0xfee00fff window] has been
reserved
[ 5.147645] system 00:02: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 5.147734] pnp 00:03: [dma 4]
[ 5.147736] pnp 00:03: [io 0x0000-0x000f]
[ 5.147739] pnp 00:03: [io 0x0080-0x0090]
[ 5.147741] pnp 00:03: [io 0x0094-0x009f]
[ 5.147743] pnp 00:03: [io 0x00c0-0x00df]
[ 5.147772] pnp 00:03: Plug and Play ACPI device, IDs PNP0200
(active)
[ 5.147818] pnp 00:04: [irq 0 disabled]
[ 5.147830] pnp 00:04: [irq 8]
[ 5.147833] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 5.147864] pnp 00:04: Plug and Play ACPI device, IDs PNP0103
(active)
[ 5.147890] pnp 00:05: [io 0x0070-0x0073]
[ 5.147922] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 5.147931] pnp 00:06: [io 0x0061]
[ 5.147960] pnp 00:06: Plug and Play ACPI device, IDs PNP0800
(active)
[ 5.147969] pnp 00:07: [io 0x00f0-0x00ff]
[ 5.147976] pnp 00:07: [irq 13]
[ 5.148033] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04
(active)
[ 5.148281] pnp 00:08: [io 0x03f8-0x03ff]
[ 5.148289] pnp 00:08: [irq 4]
[ 5.148353] pnp 00:08: Plug and Play ACPI device, IDs PNP0501
(active)
[ 5.148408] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 5.148468] system 00:09: [mem 0xe0000000-0xefffffff] has been
reserved
[ 5.148472] system 00:09: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 5.148630] pnp 00:0a: [mem 0x000d4200-0x000d7fff]
[ 5.148633] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 5.148635] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 5.148638] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 5.148640] pnp 00:0a: [mem 0xbfdf0000-0xbfdfffff]
[ 5.148642] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 5.148644] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 5.148647] pnp 00:0a: [mem 0x00100000-0xbfdeffff]
[ 5.148649] pnp 00:0a: [mem 0xbfe00000-0xbfefffff]
[ 5.148651] pnp 00:0a: [mem 0xbff00000-0xbfffffff]
[ 5.148654] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 5.148656] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 5.148659] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 5.148661] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
[ 5.148666] pnp 00:0a: disabling [mem 0x000d4200-0x000d7fff] because
it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 5.148670] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because
it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 5.148674] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because
it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 5.148678] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because
it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 5.148683] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because
it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 5.148687] pnp 00:0a: disabling [mem 0x00100000-0xbfdeffff] because
it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 5.148734] pnp 00:0a: [Firmware Bug]: [mem
0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG
area [mem 0xe0000000-0xe00fffff]; adding more reservations
[ 5.148775] system 00:0a: [mem 0xbfdf0000-0xbfdfffff] could not be
reserved
[ 5.148778] system 00:0a: [mem 0xffff0000-0xffffffff] has been
reserved
[ 5.148781] system 00:0a: [mem 0xbfe00000-0xbfefffff] has been
reserved
[ 5.148784] system 00:0a: [mem 0xbff00000-0xbfffffff] could not be
reserved
[ 5.148788] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 5.148791] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be
reserved
[ 5.148794] system 00:0a: [mem 0xfff80000-0xfffeffff] has been
reserved
[ 5.148798] system 00:0a: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 5.148818] pnp: PnP ACPI: found 11 devices
[ 5.148820] ACPI: ACPI bus type pnp unregistered
[ 5.154925] PCI: max bus depth: 1 pci_try_num: 2
[ 5.154957] pci 0000:01:00.0: BAR 6: assigned [mem
0xd0000000-0xd007ffff pref]
[ 5.154961] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 5.154964] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 5.154968] pci 0000:00:04.0: bridge window [mem
0xfb000000-0xfcffffff]
[ 5.154971] pci 0000:00:04.0: bridge window [mem
0xc0000000-0xdfffffff 64bit pref]
[ 5.154976] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 5.154979] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 5.154983] pci 0000:00:09.0: bridge window [mem
0xfd600000-0xfd6fffff]
[ 5.154986] pci 0000:00:09.0: bridge window [mem
0xfdf00000-0xfdffffff 64bit pref]
[ 5.154991] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 5.154994] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 5.154997] pci 0000:00:0a.0: bridge window [mem
0xfdc00000-0xfdcfffff]
[ 5.155001] pci 0000:00:0a.0: bridge window [mem
0xfd700000-0xfd7fffff 64bit pref]
[ 5.155005] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 5.155009] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 5.155014] pci 0000:00:14.4: bridge window [mem
0xfde00000-0xfdefffff]
[ 5.155018] pci 0000:00:14.4: bridge window [mem
0xfdd00000-0xfddfffff pref]
[ 5.155025] pci 0000:05:00.0: BAR 6: assigned [mem
0xfda00000-0xfda0ffff pref]
[ 5.155028] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 5.155031] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 5.155036] pci 0000:00:15.0: bridge window [mem
0xfdb00000-0xfdbfffff]
[ 5.155040] pci 0000:00:15.0: bridge window [mem
0xfda00000-0xfdafffff 64bit pref]
[ 5.155047] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 5.155050] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 5.155054] pci 0000:00:15.1: bridge window [mem
0xfd900000-0xfd9fffff]
[ 5.155059] pci 0000:00:15.1: bridge window [mem
0xfd800000-0xfd8fffff 64bit pref]
[ 5.155078] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 5.155082] pci 0000:00:04.0: setting latency timer to 64
[ 5.155094] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 5.155097] pci 0000:00:09.0: setting latency timer to 64
[ 5.155108] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 5.155111] pci 0000:00:0a.0: setting latency timer to 64
[ 5.155121] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 5.155124] pci 0000:00:15.0: setting latency timer to 64
[ 5.155130] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 5.155134] pci 0000:00:15.1: setting latency timer to 64
[ 5.155138] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 5.155141] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 5.155144] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 5.155147] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 5.155149] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff]
[ 5.155152] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 5.155155] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 5.155158] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff
64bit pref]
[ 5.155162] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 5.155164] pci_bus 0000:02: resource 1 [mem 0xfd600000-0xfd6fffff]
[ 5.155167] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff
64bit pref]
[ 5.155171] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 5.155173] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 5.155176] pci_bus 0000:03: resource 2 [mem 0xfd700000-0xfd7fffff
64bit pref]
[ 5.155180] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 5.155182] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
[ 5.155185] pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff
pref]
[ 5.155188] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 5.155191] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 5.155194] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 5.155197] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 5.155200] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xfebfffff]
[ 5.155202] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 5.155205] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 5.155208] pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff
64bit pref]
[ 5.155211] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 5.155214] pci_bus 0000:06: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 5.155217] pci_bus 0000:06: resource 2 [mem 0xfd800000-0xfd8fffff
64bit pref]
[ 5.155258] NET: Registered protocol family 2
[ 5.155419] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 5.156618] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 5.159349] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[ 5.159674] TCP: Hash tables configured (established 524288 bind
65536)
[ 5.159677] TCP reno registered
[ 5.159690] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 5.159725] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 5.159846] NET: Registered protocol family 1
[ 5.159879] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 5.232057] pci 0000:00:12.0: PCI INT A disabled
[ 5.232075] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 5.232102] pci 0000:00:12.2: PCI INT B disabled
[ 5.232109] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 5.304058] pci 0000:00:13.0: PCI INT A disabled
[ 5.304076] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 5.304101] pci 0000:00:13.2: PCI INT B disabled
[ 5.304118] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 5.376057] pci 0000:00:14.5: PCI INT C disabled
[ 5.376077] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 5.448057] pci 0000:00:16.0: PCI INT A disabled
[ 5.448074] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 5.448099] pci 0000:00:16.2: PCI INT B disabled
[ 5.448125] pci 0000:01:00.0: Boot video device
[ 5.448142] pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 5.448160] pci 0000:02:00.0: PCI INT A disabled
[ 5.448179] pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 5.448200] pci 0000:06:00.0: PCI INT A disabled
[ 5.448209] pci 0000:06:00.1: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 5.448227] pci 0000:06:00.1: PCI INT A disabled
[ 5.448236] pci 0000:06:00.2: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 5.448256] pci 0000:06:00.2: PCI INT B disabled
[ 5.448266] pci 0000:06:00.3: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 5.448283] pci 0000:06:00.3: PCI INT B disabled
[ 5.448292] pci 0000:06:00.4: PCI INT C -> GSI 17 (level, low)
-> IRQ 17
[ 5.448312] pci 0000:06:00.4: PCI INT C disabled
[ 5.448322] pci 0000:06:00.5: PCI INT C -> GSI 17 (level, low)
-> IRQ 17
[ 5.448339] pci 0000:06:00.5: PCI INT C disabled
[ 5.448348] pci 0000:06:00.6: PCI INT D -> GSI 17 (level, low)
-> IRQ 17
[ 5.448368] pci 0000:06:00.6: PCI INT D disabled
[ 5.448378] pci 0000:06:00.7: PCI INT D -> GSI 17 (level, low)
-> IRQ 17
[ 5.448394] pci 0000:06:00.7: PCI INT D disabled
[ 5.448398] PCI: CLS 4 bytes, default 64
[ 5.448590] Trying to unpack rootfs image as initramfs...
[ 5.512308] PCI-DMA: Disabling AGP.
[ 5.515908] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 5.515910] PCI-DMA: using GART IOMMU.
[ 5.515913] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 5.524261] IBS: LVT offset 1 assigned
[ 5.524275] perf: AMD IBS detected (0x0000001f)
[ 5.524427] audit: initializing netlink socket (disabled)
[ 5.524438] type=2000 audit(1339683140.520:1): initialized
[ 5.592167] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 5.632209] VFS: Disk quotas dquot_6.5.2
[ 5.632274] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.632818] fuse init (API version 7.17)
[ 5.632904] msgmni has been set to 7870
[ 5.644375] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 5.648255] io scheduler noop registered
[ 5.648259] io scheduler deadline registered
[ 5.648313] io scheduler cfq registered (default)
[ 5.648474] pcieport 0000:00:04.0: setting latency timer to 64
[ 5.648505] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 5.648577] pcieport 0000:00:09.0: setting latency timer to 64
[ 5.648601] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[ 5.652155] pcieport 0000:00:0a.0: setting latency timer to 64
[ 5.652184] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 5.656166] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.656194] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 5.656336] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 5.656342] ACPI: Power Button [PWRB]
[ 5.656392] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.656396] ACPI: Power Button [PWRF]
[ 5.656441] ACPI: processor limited to max C-state 1
[ 5.657604] ERST: Table is not found!
[ 5.657606] GHES: HEST is not enabled!
[ 5.657681] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.678066] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.717655] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.740468] Linux agpgart interface v0.103
[ 5.741804] brd: module loaded
[ 5.742484] loop: module loaded
[ 5.748069] ahci 0000:00:11.0: version 3.0
[ 5.748098] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 5.748205] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps
0xf impl SATA mode
[ 5.748209] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo
pmp pio slum part
[ 5.748779] scsi0 : ahci
[ 5.748862] scsi1 : ahci
[ 5.748920] scsi2 : ahci
[ 5.752039] scsi3 : ahci
[ 5.752158] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port
0xfe02f100 irq 19
[ 5.752162] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port
0xfe02f180 irq 19
[ 5.752166] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port
0xfe02f200 irq 19
[ 5.752169] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port
0xfe02f280 irq 19
[ 5.752264] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 5.768188] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps
0x3 impl SATA mode
[ 5.768195] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio
slum part
[ 5.768201] ahci 0000:05:00.0: setting latency timer to 64
[ 5.772052] scsi4 : ahci
[ 5.776270] scsi5 : ahci
[ 5.776335] ata5: SATA max UDMA/133 abar m8192@0xfdbfe000 port
0xfdbfe100 irq 17
[ 5.776340] ata6: SATA max UDMA/133 abar m8192@0xfdbfe000 port
0xfdbfe180 irq 17
[ 5.776494] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 5.776601] pata_acpi 0000:05:00.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 5.776623] pata_acpi 0000:05:00.1: setting latency timer to 64
[ 5.776634] pata_acpi 0000:05:00.1: PCI INT B disabled
[ 5.780421] Fixed MDIO Bus: probed
[ 5.780442] tun: Universal TUN/TAP device driver, 1.6
[ 5.780444] tun: (C) 1999-2004 Max Krasnyansky
<maxk@qualcomm.com>
[ 5.780492] PPP generic driver version 2.4.2
[ 5.780591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 5.780645] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 5.780671] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 5.780708] ehci_hcd 0000:00:12.2: new USB bus registered, assigned
bus number 1
[ 5.780716] ehci_hcd 0000:00:12.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.780735] QUIRK: Enable AMD PLL fix
[ 5.780745] ehci_hcd 0000:00:12.2: debug port 1
[ 5.780759] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
[ 5.792229] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 5.792374] hub 1-0:1.0: USB hub found
[ 5.792379] hub 1-0:1.0: 5 ports detected
[ 5.796245] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 5.796272] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 5.796328] ehci_hcd 0000:00:13.2: new USB bus registered, assigned
bus number 2
[ 5.796338] ehci_hcd 0000:00:13.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.796361] ehci_hcd 0000:00:13.2: debug port 1
[ 5.796376] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
[ 5.808257] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 5.808418] hub 2-0:1.0: USB hub found
[ 5.808423] hub 2-0:1.0: 5 ports detected
[ 5.812120] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 5.812147] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 5.812206] ehci_hcd 0000:00:16.2: new USB bus registered, assigned
bus number 3
[ 5.812214] ehci_hcd 0000:00:16.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.812238] ehci_hcd 0000:00:16.2: debug port 1
[ 5.812253] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
[ 5.824044] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 5.824201] hub 3-0:1.0: USB hub found
[ 5.824206] hub 3-0:1.0: 4 ports detected
[ 5.828195] ehci_hcd 0000:06:00.1: PCI INT A -> GSI 17 (level,
low) -> IRQ 17
[ 5.828226] ehci_hcd 0000:06:00.1: setting latency timer to 64
[ 5.828230] ehci_hcd 0000:06:00.1: EHCI Host Controller
[ 5.828282] ehci_hcd 0000:06:00.1: new USB bus registered, assigned
bus number 4
[ 5.828303] ehci_hcd 0000:06:00.1: applying MosChip frame-index
workaround
[ 5.852094] ehci_hcd 0000:06:00.1: irq 17, io mem 0xfd9fe000
[ 5.864095] ehci_hcd 0000:06:00.1: USB 2.0 started, EHCI 1.00
[ 5.864237] hub 4-0:1.0: USB hub found
[ 5.864242] hub 4-0:1.0: 1 port detected
[ 5.868125] ehci_hcd 0000:06:00.3: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 5.868155] ehci_hcd 0000:06:00.3: setting latency timer to 64
[ 5.868160] ehci_hcd 0000:06:00.3: EHCI Host Controller
[ 5.868212] ehci_hcd 0000:06:00.3: new USB bus registered, assigned
bus number 5
[ 5.868233] ehci_hcd 0000:06:00.3: applying MosChip frame-index
workaround
[ 5.873062] Freeing initrd memory: 14224k freed
[ 5.892085] ehci_hcd 0000:06:00.3: irq 17, io mem 0xfd9fc000
[ 5.904049] ehci_hcd 0000:06:00.3: USB 2.0 started, EHCI 1.00
[ 5.904207] hub 5-0:1.0: USB hub found
[ 5.904212] hub 5-0:1.0: 1 port detected
[ 5.904354] ehci_hcd 0000:06:00.5: PCI INT C -> GSI 17 (level,
low) -> IRQ 17
[ 5.904381] ehci_hcd 0000:06:00.5: setting latency timer to 64
[ 5.904385] ehci_hcd 0000:06:00.5: EHCI Host Controller
[ 5.904430] ehci_hcd 0000:06:00.5: new USB bus registered, assigned
bus number 6
[ 5.904452] ehci_hcd 0000:06:00.5: applying MosChip frame-index
workaround
[ 5.928064] ehci_hcd 0000:06:00.5: irq 17, io mem 0xfd9fa000
[ 5.940048] ehci_hcd 0000:06:00.5: USB 2.0 started, EHCI 1.00
[ 5.940197] hub 6-0:1.0: USB hub found
[ 5.940202] hub 6-0:1.0: 1 port detected
[ 5.940325] ehci_hcd 0000:06:00.7: PCI INT D -> GSI 17 (level,
low) -> IRQ 17
[ 5.940352] ehci_hcd 0000:06:00.7: setting latency timer to 64
[ 5.940356] ehci_hcd 0000:06:00.7: EHCI Host Controller
[ 5.940397] ehci_hcd 0000:06:00.7: new USB bus registered, assigned
bus number 7
[ 5.940416] ehci_hcd 0000:06:00.7: applying MosChip frame-index
workaround
[ 5.964089] ehci_hcd 0000:06:00.7: irq 17, io mem 0xfd9f8000
[ 5.976054] ehci_hcd 0000:06:00.7: USB 2.0 started, EHCI 1.00
[ 5.976206] hub 7-0:1.0: USB hub found
[ 5.976210] hub 7-0:1.0: 1 port detected
[ 5.976299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.976356] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level,
low) -> IRQ 18
[ 5.976381] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 5.976422] ohci_hcd 0000:00:12.0: new USB bus registered, assigned
bus number 8
[ 5.976454] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
[ 6.036192] hub 8-0:1.0: USB hub found
[ 6.036200] hub 8-0:1.0: 5 ports detected
[ 6.036331] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level,
low) -> IRQ 18
[ 6.036356] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 6.036398] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
bus number 9
[ 6.036416] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
[ 6.064068] hub 2-0:1.0: unable to enumerate USB device on port 4
[ 6.072066] ata1: SATA link down (SStatus 0 SControl 300)
[ 6.076094] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.080059] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.096057] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.096100] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.096262] hub 9-0:1.0: USB hub found
[ 6.096268] hub 9-0:1.0: 5 ports detected
[ 6.096397] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level,
low) -> IRQ 18
[ 6.096422] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 6.096463] ohci_hcd 0000:00:14.5: new USB bus registered, assigned
bus number 10
[ 6.096480] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
[ 6.156169] hub 10-0:1.0: USB hub found
[ 6.156177] hub 10-0:1.0: 2 ports detected
[ 6.156301] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level,
low) -> IRQ 18
[ 6.156326] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 6.156366] ohci_hcd 0000:00:16.0: new USB bus registered, assigned
bus number 11
[ 6.156384] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
[ 6.216170] hub 11-0:1.0: USB hub found
[ 6.216178] hub 11-0:1.0: 4 ports detected
[ 6.216308] ohci_hcd 0000:06:00.0: PCI INT A -> GSI 17 (level,
low) -> IRQ 17
[ 6.216336] ohci_hcd 0000:06:00.0: setting latency timer to 64
[ 6.216340] ohci_hcd 0000:06:00.0: OHCI Host Controller
[ 6.216385] ohci_hcd 0000:06:00.0: new USB bus registered, assigned
bus number 12
[ 6.216404] ohci_hcd 0000:06:00.0: irq 17, io mem 0xfd9ff000
[ 6.248059] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.261061] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max
UDMA/133
[ 6.261066] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth
31/32), AA
[ 6.265089] ata2.00: configured for UDMA/133
[ 6.265198] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P
51.0 PQ: 0 ANSI: 5
[ 6.265364] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 6.265367] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 6.265409] sd 1:0:0:0: [sda] Write Protect is off
[ 6.265412] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.265430] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.265625] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 6.276177] hub 12-0:1.0: USB hub found
[ 6.276186] hub 12-0:1.0: 1 port detected
[ 6.276314] ohci_hcd 0000:06:00.2: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 6.276343] ohci_hcd 0000:06:00.2: setting latency timer to 64
[ 6.276347] ohci_hcd 0000:06:00.2: OHCI Host Controller
[ 6.276386] ohci_hcd 0000:06:00.2: new USB bus registered, assigned
bus number 13
[ 6.276405] ohci_hcd 0000:06:00.2: irq 17, io mem 0xfd9fd000
[ 6.297748] sda: sda1 sda2 < sda5 >
[ 6.298058] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.336176] hub 13-0:1.0: USB hub found
[ 6.336185] hub 13-0:1.0: 1 port detected
[ 6.336315] ohci_hcd 0000:06:00.4: PCI INT C -> GSI 17 (level,
low) -> IRQ 17
[ 6.336344] ohci_hcd 0000:06:00.4: setting latency timer to 64
[ 6.336348] ohci_hcd 0000:06:00.4: OHCI Host Controller
[ 6.336392] ohci_hcd 0000:06:00.4: new USB bus registered, assigned
bus number 14
[ 6.336410] ohci_hcd 0000:06:00.4: irq 17, io mem 0xfd9fb000
[ 6.396179] hub 14-0:1.0: USB hub found
[ 6.396188] hub 14-0:1.0: 1 port detected
[ 6.396310] ohci_hcd 0000:06:00.6: PCI INT D -> GSI 17 (level,
low) -> IRQ 17
[ 6.396338] ohci_hcd 0000:06:00.6: setting latency timer to 64
[ 6.396342] ohci_hcd 0000:06:00.6: OHCI Host Controller
[ 6.396381] ohci_hcd 0000:06:00.6: new USB bus registered, assigned
bus number 15
[ 6.396402] ohci_hcd 0000:06:00.6: irq 17, io mem 0xfd9f9000
[ 6.428057] usb 4-1: new high-speed USB device number 2 using
ehci_hcd
[ 6.456177] hub 15-0:1.0: USB hub found
[ 6.456186] hub 15-0:1.0: 1 port detected
[ 6.456271] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.456349] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level,
low) -> IRQ 17
[ 6.456376] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 6.456379] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 6.456420] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 16
[ 6.456539] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd6fe000
[ 6.456584] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[ 6.456589] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 6.456696] xHCI xhci_add_endpoint called for root hub
[ 6.456698] xHCI xhci_check_bandwidth called for root hub
[ 6.456724] hub 16-0:1.0: USB hub found
[ 6.456729] hub 16-0:1.0: 2 ports detected
[ 6.456785] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 6.456819] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 17
[ 6.460058] xHCI xhci_add_endpoint called for root hub
[ 6.460060] xHCI xhci_check_bandwidth called for root hub
[ 6.460084] hub 17-0:1.0: USB hub found
[ 6.460089] hub 17-0:1.0: 2 ports detected
[ 6.460210] usbcore: registered new interface driver libusual
[ 6.460248] i8042: PNP: No PS/2 controller found. Probing ports
directly.
[ 6.492816] i8042: Failed to disable AUX port, but continuing
anyway... Is this a SiS?
[ 6.492818] i8042: If AUX port is really absent please use the
'i8042.noaux' option
[ 6.516050] Refined TSC clocksource calibration: 2008.878 MHz.
[ 6.516057] Switching to clocksource tsc
[ 6.680050] usb 5-1: new high-speed USB device number 2 using
ehci_hcd
[ 6.744128] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.744259] mousedev: PS/2 mouse device common for all mice
[ 6.744373] rtc_cmos 00:05: RTC can wake from S4
[ 6.744456] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 6.744483] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 6.744567] device-mapper: uevent: version 1.0.3
[ 6.744628] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel@redhat.com
[ 6.744635] cpuidle: using governor ladder
[ 6.744637] cpuidle: using governor menu
[ 6.744638] EFI Variables Facility v0.08 2004-May-17
[ 6.744860] TCP cubic registered
[ 6.744961] NET: Registered protocol family 10
[ 6.745441] NET: Registered protocol family 17
[ 6.745457] Registering the dns_resolver key type
[ 6.745557] registered taskstats version 1
[ 6.760950] Magic number: 0:703:232
[ 6.761055] rtc_cmos 00:05: setting system clock to 2012-06-14
14:12:22 UTC (1339683142)
[ 6.761060] powernow-k8: Found 1 AMD Athlon(tm) II X2 270u Processor
(1 cpu cores) (version 2.20.00)
[ 6.761091] powernow-k8: 0 : pstate 0 (2000 MHz)
[ 6.761093] powernow-k8: 1 : pstate 1 (1500 MHz)
[ 6.761095] powernow-k8: 2 : pstate 2 (800 MHz)
[ 6.761140] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.761142] EDD information not available.
[ 6.762904] Freeing unused kernel memory: 920k freed
[ 6.763139] Write protecting the kernel read-only data: 12288k
[ 6.769415] Freeing unused kernel memory: 1608k freed
[ 6.774576] Freeing unused kernel memory: 1196k freed
[ 6.791369] udevd[160]: starting version 175
[ 6.821390] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 6.821394] vesafb: scrolling: redraw
[ 6.821398] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 6.823750] vesafb: framebuffer at 0xdf000000, mapped to
0xffffc90011100000, using 3072k, total 3072k
[ 6.823860] Console: switching to colour frame buffer device 128x48
[ 6.823881] fb0: VESA VGA frame buffer device
[ 6.924604] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.924627] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 6.924664] r8169 0000:03:00.0: setting latency timer to 64
[ 6.924708] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
[ 6.925129] r8169 0000:03:00.0: eth0: RTL8168e/8111e at
0xffffc9000066c000, 1c:6f:65:d5:ec:bf, XID 0c200000 IRQ 45
[ 6.925133] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]
[ 6.964030] usb 9-4: new low-speed USB device number 2 using ohci_hcd
[ 6.972368] scsi6 : pata_atiixp
[ 6.973767] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 6.973799] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 6.974098] scsi7 : pata_atiixp
[ 6.974658] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00
irq 14
[ 6.974661] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08
irq 15
[ 6.976071] scsi8 : pata_jmicron
[ 6.977677] scsi9 : pata_jmicron
[ 6.977744] ata9: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma
0xab00 irq 17
[ 6.977747] ata10: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma
0xab08 irq 17
[ 6.992539] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22
(level, low) -> IRQ 22
[ 7.048113] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI
v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 7.156277] ata7.01: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max
UDMA/133
[ 7.156284] ata7.01: limited to UDMA/33 due to 40-wire cable
[ 7.188269] ata7.01: configured for UDMA/33
[ 7.202128] scsi 6:0:1:0: CD-ROM HL-DT-ST BD-RE BH10LS38
1.00 PQ: 0 ANSI: 5
[ 7.216959] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 7.216962] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.217271] sr 6:0:1:0: Attached scsi CD-ROM sr0
[ 7.217406] sr 6:0:1:0: Attached scsi generic sg1 type 5
[ 7.269330] input: 2.4GHZ Mouse as
/devices/pci0000:00/0000:00:13.0/usb9/9-4/9-4:1.0/input/input2
[ 7.269460] generic-usb 0003:1EA7:0002.0001: input,hidraw0: USB HID
v1.10 Keyboard [2.4GHZ Mouse] on usb-0000:00:13.0-4/input0
[ 7.277515] input: 2.4GHZ Mouse as
/devices/pci0000:00/0000:00:13.0/usb9/9-4/9-4:1.1/input/input3
[ 7.277867] generic-usb 0003:1EA7:0002.0002: input,hiddev0,hidraw1:
USB HID v1.10 Mouse [2.4GHZ Mouse] on usb-0000:00:13.0-4/input1
[ 7.277998] usbcore: registered new interface driver usbhid
[ 7.278000] usbhid: USB HID core driver
[ 7.308024] usb 9-5: new low-speed USB device number 3 using ohci_hcd
[ 7.342939] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 7.493428] input: LITEON Technology USB Multimedia Keyboard as
/devices/pci0000:00/0000:00:13.0/usb9/9-5/9-5:1.0/input/input4
[ 7.493510] generic-usb 0003:046D:C312.0003: input,hidraw2: USB HID
v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on
usb-0000:00:13.0-5/input0
[ 7.548126] firewire_core: created device fw0: GUID 001f22a3001c6f65,
S400
[ 7.628049] usb 11-1: new low-speed USB device number 2 using
ohci_hcd
[ 15.371727] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.640130] udevd[396]: starting version 175
[ 16.631666] Adding 4191228k swap on /dev/sda5. Priority:-1 extents:1
across:4191228k
[ 16.828797] lp: driver loaded but no devices found
[ 17.298752] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 17.433641] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts
with ACPI region SOR1 [io 0xb00-0xb0f]
[ 17.433645] ACPI: This conflict may cause random problems and system
instability
[ 17.433647] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 17.433654] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 17.434189] wmi: Mapper loaded
[ 17.699810] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 17.699972] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 18.033071] MCE: In-kernel MCE decoding enabled.
[ 18.210942] input: iMON Panel, Knob and Mouse(15c2:0038) as
/devices/pci0000:00/0000:00:16.0/usb11/11-1/11-1:1.0/input/input5
[ 18.271316] IR NEC protocol handler initialized
[ 18.288045] Registered IR keymap rc-imon-pad
[ 18.288160] input: iMON Remote (15c2:0038) as
/devices/pci0000:00/0000:00:16.0/usb11/11-1/11-1:1.0/rc/rc0/input6
[ 18.289058] rc0: iMON Remote (15c2:0038) as
/devices/pci0000:00/0000:00:16.0/usb11/11-1/11-1:1.0/rc/rc0
[ 18.296138] imon 11-1:1.0: iMON device (15c2:0038, intf0) on
usb<11:2> initialized
[ 18.296166] imon 11-1:1.1: iMON device (15c2:0038, intf1) on
usb<11:2> initialized
[ 18.296183] usbcore: registered new interface driver imon
[ 18.345250] EDAC MC: Ver: 2.1.0
[ 18.375228] AMD64 EDAC driver v3.4.0
[ 18.375653] EDAC amd64: DRAM ECC disabled.
[ 18.375658] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.
[ 18.375659] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.
[ 18.375661] (Note that use of the override may cause unknown side
effects.)
[ 18.379965] IR RC5(x) protocol handler initialized
[ 18.470437] IR RC6 protocol handler initialized
[ 18.864859] IR JVC protocol handler initialized
[ 18.905090] input: eventlircd as /devices/virtual/input/input7
[ 18.930914] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will
try to load a firmware
[ 19.181828] RPC: Registered named UNIX socket transport module.
[ 19.181832] RPC: Registered udp transport module.
[ 19.181834] RPC: Registered tcp transport module.
[ 19.181836] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.247097] init: irexec main process (862) terminated with status 1
[ 19.247123] init: irexec main process ended, respawning
[ 19.271728] FS-Cache: Loaded
[ 19.328381] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16
(level, low) -> IRQ 16
[ 19.545016] IR Sony protocol handler initialized
[ 19.917075] hda_codec: ALC889: BIOS auto-probing.
[ 19.921025] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 19.921029] dw2102: start downloading DW210X firmware
[ 19.928814] r8169 0000:03:00.0: eth0: link down
[ 19.928823] r8169 0000:03:00.0: eth0: link down
[ 19.929346] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.942445] input: HDA ATI SB Line as
/devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 19.942576] input: HDA ATI SB Front Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 19.942727] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 19.942834] input: HDA ATI SB Front Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 19.942946] input: HDA ATI SB Line-Out Side as
/devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 19.943091] input: HDA ATI SB Line-Out CLFE as
/devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 19.943204] input: HDA ATI SB Line-Out Surround as
/devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 19.943309] input: HDA ATI SB Line-Out Front as
/devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 19.943864] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17
(level, low) -> IRQ 17
[ 19.943867] hda_intel: Disabling MSI
[ 19.943915] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 19.981209] IR MCE Keyboard/mouse protocol handler initialized
[ 19.999845] usb 4-1: USB disconnect, device number 2
[ 20.044587] lirc_dev: IR Remote Control driver registered, major 249
[ 20.044810] IR LIRC bridge handler initialized
[ 20.100065] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[ 20.100239] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 20.100259] DVB: registering new adapter (TeVii S480.1 USB)
[ 20.100412] dvb-usb: MAC address: 18:18:18:18:18:18
[ 20.117457] FS-Cache: Netfs 'nfs' registered for caching
[ 20.407742] Invalid probe, probably not a DS3000
[ 20.407748] dvb-usb: no frontend was attached by 'TeVii S480.1 USB'
[ 20.407848] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:15.1/0000:06:00.1/usb4/4-1/input/input16
[ 20.408994] dvb-usb: schedule remote query interval to 150 msecs.
[ 20.409000] dvb-usb: TeVii S480.1 USB successfully initialized and
connected.
[ 20.409303] dvb-usb: TeVii S480.1 USB successfully deinitialized and
disconnected.
[ 20.409546] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will
try to load a firmware
[ 20.410511] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.429299] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 20.429304] dw2102: start downloading DW210X firmware
[ 20.462428] nvidia: module license 'NVIDIA' taints kernel.
[ 20.646551] usb 5-1: USB disconnect, device number 2
[ 20.744022] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[ 20.744483] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 20.744503] DVB: registering new adapter (TeVii S480.2 USB)
[ 20.744654] dvb-usb: MAC address: d0:d0:d0:d0:d0:d0
[ 20.748394] Invalid probe, probably not a DS3000
[ 20.748401] dvb-usb: no frontend was attached by 'TeVii S480.2 USB'
[ 20.749204] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:15.1/0000:06:00.3/usb5/5-1/input/input17
[ 20.752348] dvb-usb: schedule remote query interval to 150 msecs.
[ 20.752354] dvb-usb: TeVii S480.2 USB successfully initialized and
connected.
[ 20.752765] dvb-usb: TeVii S480.2 USB successfully deinitialized and
disconnected.
[ 20.756205] usbcore: registered new interface driver dw2102
[ 20.850004] [drm] Initialized drm 1.1.0 20060810
[ 20.893943] [drm:i915_init] *ERROR* drm/i915 can't work without
intel_agp module!
[ 20.976048] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 21.000029] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 21.024016] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 21.048012] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 21.048107] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input18
[ 21.050748] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input19
[ 21.050901] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input20
[ 21.051009] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card1/input21
[ 21.065688] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 21.065698] nvidia 0000:01:00.0: setting latency timer to 64
[ 21.065703] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.066917] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40
Thu Apr 5 21:37:00 PDT 2012
[ 21.676883] r8169 0000:03:00.0: eth0: link up
[ 21.677343] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.756023] usb 4-1: new high-speed USB device number 3 using
ehci_hcd
[ 21.889491] usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint
0x81 has invalid maxpacket 2
[ 21.892849] dvb-usb: found a 'TeVii S660 USB' in cold state, will try
to load a firmware
[ 21.904216] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 21.904219] dw2102: start downloading DW210X firmware
[ 22.056023] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 22.056085] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 22.056505] DVB: registering new adapter (TeVii S660 USB)
[ 22.310348] dvb-usb: MAC address: 00:18:bd:5a:c3:6b
[ 22.313345] DS3000 chip version: 0.192 attached.
[ 22.313718] dw2102: Attached ds3000+ds2020!
[ 22.313719]
[ 22.313723] DVB: registering adapter 0 frontend 0 (Montage Technology
DS3000/TS2020)...
[ 22.314519] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:15.1/0000:06:00.1/usb4/4-1/input/input22
[ 22.314586] dvb-usb: schedule remote query interval to 150 msecs.
[ 22.314591] dvb-usb: TeVii S660 USB successfully initialized and
connected.
[ 22.552024] usb 5-1: new high-speed USB device number 3 using
ehci_hcd
[ 22.685074] usb 5-1: config 1 interface 0 altsetting 0 bulk endpoint
0x81 has invalid maxpacket 2
[ 22.687987] dvb-usb: found a 'TeVii S660 USB' in cold state, will try
to load a firmware
[ 22.691331] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 22.691335] dw2102: start downloading DW210X firmware
[ 22.844011] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 22.844065] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 22.844451] DVB: registering new adapter (TeVii S660 USB)
[ 23.610538] dvb-usb: MAC address: 00:18:bd:5a:c3:6c
[ 23.613767] DS3000 chip version: 0.192 attached.
[ 23.614156] dw2102: Attached ds3000+ds2020!
[ 23.614158]
[ 23.614161] DVB: registering adapter 1 frontend 0 (Montage Technology
DS3000/TS2020)...
[ 23.614966] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:15.1/0000:06:00.3/usb5/5-1/input/input23
[ 23.615034] dvb-usb: schedule remote query interval to 150 msecs.
[ 23.615038] dvb-usb: TeVii S660 USB successfully initialized and
connected.
[ 23.682590] HDMI hot plug event: Codec=1 Pin=5 Presence_Detect=1
ELD_Valid=0
[ 23.688023] HDMI status: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 23.707746] HDMI hot plug event: Codec=1 Pin=5 Presence_Detect=1
ELD_Valid=1
[ 23.712038] HDMI status: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 24.184408] init: failsafe main process (856) killed by TERM signal
[ 24.480646] HDMI: detected monitor SHARP HDMI
[ 24.480648] at connection type HDMI
[ 24.480652] HDMI: available speakers: FL/FR
[ 24.480656] HDMI: supports coding type LPCM: channels = 2, rates =
32000 44100 48000, bits = 16 20 24
[ 24.532300] init: wait-for-state (vdr-frontendvdr) main process
(1389) killed by TERM signal
[ 24.555877] ds3000_firmware_ondemand: Waiting for firmware upload
(dvb-fe-ds3000.fw)...
[ 24.569965] ds3000_firmware_ondemand: Waiting for firmware
upload(2)...
[ 24.594722] init: wait-for-state (vdr-frontendsound-device) main
process (1573) killed by TERM signal
[ 24.844791] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 24.856260] NFSD: starting 90-second grace period
[ 25.259962] ds3000_firmware_ondemand: Waiting for firmware upload
(dvb-fe-ds3000.fw)...
[ 25.261676] ds3000_firmware_ondemand: Waiting for firmware
upload(2)...
[ 25.333361] init: plymouth-stop pre-start process (1738) terminated
with status 1
[ 32.640006] eth0: no IPv6 routers present
[ 105.399547] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000207
[ 105.431523] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000309
[ 105.471503] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000309
[ 105.511482] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 105.559459] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000101
[ 106.135175] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 106.271107] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000101
[ 106.383049] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 106.455012] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100040e
[ 106.526985] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 106.566966] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 106.606940] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 106.646928] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 106.966761] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000309
[ 107.006737] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 107.078708] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 107.118691] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 107.318585] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000100
[ 107.374555] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100020e
[ 107.414533] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 107.486507] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 107.526483] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 107.718383] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 107.774354] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 107.846317] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 107.886298] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 107.958268] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000307
[ 108.238130] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000102
[ 108.270106] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100060e
[ 108.350075] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100020e
[ 108.390055] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100020e
[ 108.462010] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100060e
[ 108.917786] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x10000ff
[ 108.973755] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000af2
[ 109.045730] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000af2
[ 109.085707] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x10009f2
[ 109.117683] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x10007f2
[ 109.157663] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x10007f2
[ 109.197643] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x10001f2
[ 109.229654] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x10003f2
[ 109.413536] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 110.213141] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100050c
[ 110.245120] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 110.325088] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 110.357074] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 110.397052] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 110.437025] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000101
[ 110.716886] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 110.772857] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100020e
[ 110.852826] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 110.884804] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 110.964762] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 112.987753] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 113.051716] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000409
[ 113.091696] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100030e
[ 113.163670] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 113.203648] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 113.275606] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 113.315584] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 114.674912] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100020e
[ 114.714886] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 114.786859] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 114.826837] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 116.753875] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x10000ff
[ 116.961766] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 117.009740] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100060e
[ 117.089710] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100090e
[ 117.121693] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100060e
[ 117.201654] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100060e
[ 117.233638] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100060e
[ 117.441528] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 117.489501] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 117.569470] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 117.609450] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 117.681414] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 117.721395] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 117.969263] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000001
[ 118.033229] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 118.105203] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 118.145182] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 118.217148] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 118.257157] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x1000102
[ 120.535983] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 120.575957] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 120.647930] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 120.687909] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 120.759876] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 120.799856] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e
[ 120.871812] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100010e
[ 120.911789] imon 11-1:1.0: imon_incoming_packet: unknown keypress,
code 0x100000e

Zitat von Keine_Ahnung

Was für ein Menü willst du da sehen? Wenn du rechts drückst dann wird oben rechts aus der "#0" eine "#1".

Muss ich mich korrigieren, da ist kein menü, trotzdem (warum auch immer) bekomme ich ein Bild wenn ich auf Signalinformation gehe und dann nach "rechts" drück.
Sobald ich hin und her schalte isses dann wieder weg..

Ah moment... ich glaub der schaltet zwischen den signalen hier... ich probier mal was...

Ja wie oben beschrieben...
Ein eigenes Signalkabel welches von dem "Kaskadenswitch" abgeht.

Meine Kabel funktionieren.

DVB-S #1 funktoniert. Egal welches der beiden kabel ich dran mache.
DVB-S #0 funktioniert nicht.

Entweder is noch ne einstellung falsch oder der Kanal der Karte is kaputt....