New DVB-T tunner and channels.conf issue

  • Hi,


    Recently i've bought msi dvb-t tunner to watch those channels on my yavdr instalaltion.
    As this tunner is supported by the kernel i had no problems with performing a scan.
    But i think there is some issues with data format. I'm using w_scan:

    Code
    1. w_scan -ft -c PL -o7 -X >> /c2.conf


    And file looks like this:

    Code
    1. Polsat(EmiTel):698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AU TO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:102:103:3
    2. TVN(EmiTel):698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO: TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:202:203:4
    3. TV4(EmiTel):698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO: TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:302:303:5
    4. TV Puls(EmiTel):698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_A UTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:402:403:6
    5. TVN Siedem(EmiTel):698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QA M_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:502:503:23
    6. PULS 2(EmiTel):698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AU TO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:602:603:24
    7. TV6(EmiTel):698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO: TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:702:703:25
    8. Polsat Sport News(EmiTel):698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_ AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:802:803: 26


    When I paste it to empty channels.conf file there are no channels in xmbc interface and webfrontend.
    I've checked credidentials to file and they are the same as in "old" channels.conf file.


    What I'm doing wrong?

  • Hi,
    What I'm doing wrong?


    You should think about which channels.conf format for which program you need.


    And after that, you should rescan, providing w_scan with the correct flag for the output format you need.
    -X and -o7 flags together doesn't make any sense, you are requesting two different output formats.

  • Thanks ;) Now everything work's fine ;)


    Below - if someone will need - configuration in silesia. poland.


    Code
    1. Polsat;EmiTel:698000:I999B8C999D999M998T999G999Y999:T:27500:102=2:103=pol@4:105:0:3:8808:2:0
    2. TVN;EmiTel:698000:I999B8C999D999M998T999G999Y999:T:27500:202=2:203=pol@4;204=@106:205:0:4:8808:2:0
    3. TV4;EmiTel:698000:I999B8C999D999M998T999G999Y999:T:27500:302=2:303=pol@4:305:0:5:8808:2:0
    4. TV Puls;EmiTel:698000:I999B8C999D999M998T999G999Y999:T:27500:402=2:403=pol@4:0:0:6:8808:2:0
    5. TVN Siedem;EmiTel:698000:I999B8C999D999M998T999G999Y999:T:27500:502=2:503=pol@4;504=@106:505:0:23:8808:2:0
    6. PULS 2;EmiTel:698000:I999B8C999D999M998T999G999Y999:T:27500:602=2:603=pol@4:0:0:24:8808:2:0
    7. TV6;EmiTel:698000:I999B8C999D999M998T999G999Y999:T:27500:702=2:703=pol@4:0:0:25:8808:2:0
    8. Polsat Sport News;EmiTel:698000:I999B8C999D999M998T999G999Y999:T:27500:802=2:803=pol@4:0:0:26:8808:2:0