Jetzt habe ich gerade ein Problem entdeckt - ich weiß nicht, wonach ich suchen soll, darum beschreibe ich es hier. (Google: [vdr zweite DVB Karte wird nicht erkannt "Nova HD S2"] u. ä. Suche hat mich in meiner akuten Not nicht weiter gebracht)
Es scheint, als ob nur eine der beiden verbauten Nova-HD-S2 genutzt werden. Aufgefallen ist mir das, als ich einen Timerkonflikt erhielt. Daraufhin habe ich eine Live-Aufnahme gestartet und siehe da, ich komme vom Transponder nicht mehr weg.
Soweit ich mich erinnere, wurden unter EasyVDR automatisch alle Karten erkannt - zumindest kann ich mich nicht daran erinnern, dass ich die zweite Karte explizit anmelden musste. Ich kann mich aber auch irren, es lief schließlich jahrelang.
Bitte dringend um Hilfe oder den entscheidenden Hinweis, sonst ist es heute Abend aus mit dem Familienfrieden ...
Hier ein lspci:
01:05.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
01:05.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
01:05.2 Multimedia video controller: Device 16f1:8800 (rev 05)
01:05.3 Multimedia controller: Device 16f1:8801 (rev 05)
01:05.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
01:05.6 Multimedia controller: Device 16f1:8804 (rev 05)
01:06.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
01:06.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
01:06.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
01:06.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
Und noch die Ausgabe von dmesg: (gekürzte Fassung)
[ 11.833206] <30>udev[359]: starting version 167
[ 11.852939] lp: driver loaded but no devices found
[ 11.854636] i2c i2c-0: nForce2 SMBus adapter at 0x2d00
[ 11.854641] ACPI: resource nForce2_smbus [io 0x2e00-0x2e3f] conflicts with ACPI region SM00 [io 0x2e00-0x2e3f]
[ 11.854643] ACPI: This conflict may cause random problems and system instability
[ 11.854644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.854665] i2c i2c-1: nForce2 SMBus adapter at 0x2e00
[ 11.869723] asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
[ 11.873806] Adding 8254460k swap on /dev/sda5. Priority:-1 extents:1 across:8254460k
[ 11.882923] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 11.885870] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/LNXVIDEO:00/input/input4
[ 11.886508] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 11.909538] MCE: In-kernel MCE decoding enabled.
[ 11.912882] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 11.938119] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 11.940151] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.942800] EDAC MC: Ver: 2.1.0 Jan 3 2012
[ 11.958524] EDAC amd64_edac: v3.3.0
[ 11.966799] EDAC amd64: DRAM ECC disabled.
[ 11.966807] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 11.966808] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 11.966809] (Note that use of the override may cause unknown side effects.)
[ 11.982420] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.025102] Linux video capture interface: v2.00
[ 12.046043] nvidia: module license 'NVIDIA' taints kernel.
[ 12.046046] Disabling lock debugging due to kernel taint
[ 12.059364] IR NEC protocol handler initialized
[ 12.064248] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 12.065846] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
[ 12.066493] IR RC5(x) protocol handler initialized
[ 12.071352] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16
[ 12.071380] cx8800 0000:01:06.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16
[ 12.072755] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
[ 12.072757] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 12.074333] IR RC6 protocol handler initialized
[ 12.090111] input: X10 WTI RF receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/input/input5
[ 12.090198] usbcore: registered new interface driver ati_remote
[ 12.090200] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
[ 12.098044] usb 3-2: Weird data, len=1 ff 00 00 00 00 00 ...
[ 12.131457] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 12.131462] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 12.131608] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 12.131612] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 12.131615] hda_intel: Disable MSI for Nvidia chipset
[ 12.131640] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 12.132974] cx2388x alsa driver version 0.0.8 loaded
[ 12.172753] IR JVC protocol handler initialized
[ 12.204134] i2c-core: driver [tuner] using legacy suspend method
[ 12.204136] i2c-core: driver [tuner] using legacy resume method
[ 12.259143] tveeprom 2-0050: Hauppauge model 69100, rev B4C3, serial# 6535295
[ 12.259146] tveeprom 2-0050: MAC address is 00:0d:fe:63:b8:7f
[ 12.259148] tveeprom 2-0050: tuner model is Conexant CX24118A (idx 123, type 4)
[ 12.259151] tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
[ 12.259153] tveeprom 2-0050: audio processor is None (idx 0)
[ 12.259155] tveeprom 2-0050: decoder processor is CX880 (idx 20)
[ 12.259156] tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
[ 12.259158] cx88[0]: hauppauge eeprom: model=69100
[ 12.290033] Registered IR keymap rc-rc5-hauppauge-new
[ 12.290123] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:08.0/0000:01:06.0/rc/rc0/input6
[ 12.290179] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:08.0/0000:01:06.0/rc/rc0
[ 12.290223] cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 16, latency: 32, mmio: 0xf0000000
[ 12.290282] cx88[0]/0: registered device video0 [v4l2]
[ 12.290308] cx88[0]/0: registered device vbi0
[ 12.291853] cx88[1]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
[ 12.291855] cx88[1]: TV tuner type -1, Radio tuner type -1
[ 12.326579] RPC: Registered udp transport module.
[ 12.326583] RPC: Registered tcp transport module.
[ 12.326585] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.336192] FS-Cache: Loaded
[ 12.350338] FS-Cache: Netfs 'nfs' registered for caching
[ 12.372027] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.438528] IR Sony protocol handler initialized
[ 12.447823] lirc_dev: IR Remote Control driver registered, major 250
[ 12.449330] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[ 12.449337] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
[ 12.449344] nvidia 0000:02:00.0: setting latency timer to 64
[ 12.449348] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.449825] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Apr 18 14:53:56 PDT 2011
[ 12.452454] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 12.452456] IR LIRC bridge handler initialized
[ 12.456355] tveeprom 3-0050: Huh, no eeprom present (err=-6)?
[ 12.456360] tveeprom 3-0050: Hauppauge model 69100, rev B4C3, serial# 6535295
[ 12.456363] tveeprom 3-0050: MAC address is 00:0d:fe:63:b8:7f
[ 12.456365] tveeprom 3-0050: tuner model is Conexant CX24118A (idx 123, type 4)
[ 12.456367] tveeprom 3-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
[ 12.456369] tveeprom 3-0050: audio processor is None (idx 0)
[ 12.456371] tveeprom 3-0050: decoder processor is CX880 (idx 20)
[ 12.456373] tveeprom 3-0050: has no radio, has IR receiver, has no IR transmitter
[ 12.456375] cx88[1]: hauppauge eeprom: model=69100
[ 12.459601] Registered IR keymap rc-rc5-hauppauge-new
[ 12.459736] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:08.0/0000:01:05.0/rc/rc1/input7
[ 12.459794] rc1: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:08.0/0000:01:05.0/rc/rc1
[ 12.459894] rc rc1: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 1
[ 12.459894] cx88[1]/2: cx2388x 8802 Driver Manager
[ 12.460149] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 12.460154] cx88-mpeg driver manager 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 12.460161] cx88[1]/2: found at 0000:01:05.0, rev: 5, irq: 19, latency: 32, mmio: 0xf4000000
[ 12.460255] cx88[0]/2: cx2388x 8802 Driver Manager
[ 12.460262] cx88-mpeg driver manager 0000:01:06.2: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16
[ 12.460267] cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 16, latency: 32, mmio: 0xf2000000
[ 12.462639] input: lircd as /devices/virtual/input/input8
[ 12.464202] cx88_audio 0000:01:05.1: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 12.464227] cx88[1]/1: CX88x/0: ALSA support for cx2388x boards
[ 12.464503] cx88_audio 0000:01:06.1: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16
[ 12.464519] cx88[0]/1: CX88x/1: ALSA support for cx2388x boards
[ 12.474532] cx88/2: cx2388x dvb driver version 0.0.8 loaded
[ 12.474535] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 12.474539] cx88[1]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
[ 12.474541] cx88[1]/2: cx2388x based DVB/ATSC card
[ 12.474543] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 12.476975] cx24116_readreg: reg=0xff (error=-6)
[ 12.477612] cx24116_readreg: reg=0xfe (error=-6)
[ 12.477614] Invalid probe, probably not a CX24116 device
[ 12.477670] cx88[1]/2: frontend initialization failed
[ 12.477672] cx88[1]/2: dvb_register failed (err = -22)
[ 12.477674] cx88[1]/2: cx8802 probe failed, err = -22
[ 12.477676] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
[ 12.477679] cx88[0]/2: cx2388x based DVB/ATSC card
[ 12.477680] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 12.482255] DVB: registering new adapter (cx88[0])
[ 12.482260] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
[ 12.600338] input: eventlircd as /devices/virtual/input/input9
[ 13.021842] svc: failed to register lockdv1 RPC service (errno 97).
[ 13.021896] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 13.022224] NFSD: starting 90-second grace period
[ 13.180417] input: eventlircd as /devices/virtual/input/input10
[ 18.489427] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
[ 18.505078] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
[ 22.700029] eth0: no IPv6 routers present
[ 23.830714] cx24116_load_firmware: FW version 1.26.90.0
[ 23.830738] cx24116_firmware_ondemand: Firmware upload complete
Alles anzeigen