DFatmo Plugin unter yaVDR 0.5 Final mit Karatelightsupport | Installationsanleitung

durchflieger · 20. November 2011

Zeig doch mal den Log des xine player ob es da Fehlermeldungen des DFAtmo gibt.

Dr. n00b · 20. November 2011

Mahlzeit.
wo soll denn der logoutput von xine player drin stehen?
in /var/log/syslog oder /tmp/vdr-frontend.log

Update:
in der vdr-frontend.log
finde ich u.a.
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_dfatmo.so found

Also xine-check sagt folgendes (aber keine Ahnung ob es von Nutzen ist)

yaVDR:~$ xine-check
Please be patient, this script may take a while to run...
[ good ] you're using Linux, doing specific tests
[ good ] looks like you have a /proc filesystem mounted.
[ good ] You seem to have a reasonable kernel version (2.6.38-12-generic)
[ good ] intel compatible processor, checking MTRR support
[ good ] you have MTRR support and there are some ranges set.
[ good ] found the player at /usr/bin/xine
[ good ] /usr/bin/xine is in your PATH
[ good ] plugin directory /usr/lib/xine/plugins/2.0 exists.
[ good ] found unknown plugin: xineplug_flac.so
[ good ] found unknown plugin: xineplug_nsf.so
[ good ] found unknown plugin: xineplug_post_dfatmo.so
[ good ] found unknown plugin: xineplug_sputext.so
[ good ] found unknown plugin: xineplug_vdr.so
[ good ] found unknown plugin: xineplug_wavpack.so
[ good ] found unknown plugin: xineplug_xiph.so
[ good ] found input plugins
[ good ] found demux plugins
[ good ] found decoder plugins
[ good ] found video_out plugins
[ good ] found audio_out plugins
[ good ] skin directory /usr/share/xine/skins exists.
[ good ] found logo in /usr/share/xine/skins
[ good ] I even found some skins.

Grüßle

Dr. n00b · 20. November 2011

Hab mal meine vdr-frontend.conf angefügt vielleicht seht ihr ja meinen Fehler. Das ist bestimmt nur eine Kleinigkeit.
Zeile 47 habe ich hinzugefügt.

Code

#################################################################################
#                                                                           	#
#   The following configuration file is generated automatically by the yaVDR	#
# 	system. Don't change this file as every update of yaVDR will overwrite	#
#     	the local changes. Instead put your required customizations       	#
#   	into /etc/yavdr/templates_custom/ based on the original templates   	#
#                  	under /usr/share/yavdr/templates.                    	#
#                                                                           	#
#        	http://www.yavdr.org/developer-zone/template-overview/         	#
#                                                                           	#
#                                                                           	#
#################################################################################
# yavdr-frontend - Starts xine or vdr-sxfe
#


description 	"yavdr-frontend"
author      	"Gerald Dachs <gda@dachsweb.de>"




start on ((started vdr and stopped openbox-tools) or vdr-frontend-restart or resume)
stop on stopping vdr or suspend or stopping openbox


nice -10
respawn


pre-start script
if [ -e /tmp/.standalone ]; then
   vdr-dbus-send /Remote remote.Disable ||:
   exit 1
fi
end script




env HOME=/var/lib/vdr
#env XINE_BUFFER_LOG=1
env USE_AUTOCROP=0
export USE_AUTOCROP
 
script
export DISPLAY=:1`dbget vdr.tempdisplay`


#ASPECT_RATIO="anamorphic"
GEOMETRY=`xrandr | grep "\*" | cut -d" " -f4`


test -f /etc/default/xine && . /etc/default/xine
XINEOPTS="-G $GEOMETRY -A alsa --config /etc/xine/config --keymap=file:/etc/xine/keymap --post vdr --post vdr_video --post vdr_audio --verbose=2 --no-gui --no-logo --no-splash --deinterlace -pq 
--post=dfatmo:driver=serial,driver_param=/dev/ttyACM0;proto:karatelight,top=2,bottom=2,left=2,right=2"


if [ -n "$ASPECT_RATIO" ]; then
  XINEOPTS="$XINEOPTS --aspect-ratio=$ASPECT_RATIO"
fi


if [ "$USE_AUTOCROP" = "1" ]; then
  XINEOPTS="$XINEOPTS --post autocrop:enable_autodetect=1,enable_subs_detect=1,soft_start=1,stabilize=1"
fi


while [ ! -e /tmp/vdr-xine/stream ] ; do sleep 0.1 ; done
while ! grep -q "^ 1" /proc/asound/cards ; do sleep 1 ; done
while ! grep -q "^ 0" /proc/asound/cards ; do sleep 1 ; done
exec start-stop-daemon --start --exec /usr/bin/xine --user vdr --chuid vdr \
-- $XINEOPTS vdr:/tmp/vdr-xine/stream#demux:mpeg_pes &> /tmp/vdr-frontend.log
end script

Alles anzeigen

Grüßle

durchflieger · 20. November 2011

Lösche mal die vdr-frontend.log. Lass den xine mal laufen und wieder beenden. Dann die kpl. vdr-frontend.log hier mal zeigen.

Dr. n00b · 20. November 2011

Hi ich mußte das frontend von xine auf vdr-sxfe@vdr-plugin-xinelibputput weil ich unter xine sehr viele "Ruckler im Bild und asynchrone stimmen über HDMI
habe / hatte. Kann natürlich sein, dass es nur Einbildung ist, das es seit dem besser ist. Aber naja, anderes Thema / Baustelle

Meine vdr-frontend.conf // mit umgestellter xineliboutput ist nun:

Code

#################################################################################
#                                                                           	#
#   The following configuration file is generated automatically by the yaVDR	#
# 	system. Don't change this file as every update of yaVDR will overwrite	#
#     	the local changes. Instead put your required customizations       	#
#   	into /etc/yavdr/templates_custom/ based on the original templates   	#
#                  	under /usr/share/yavdr/templates.                    	#
#                                                                           	#
#        	http://www.yavdr.org/developer-zone/template-overview/         	#
#                                                                           	#
#                                                                           	#
#################################################################################
# yavdr-frontend - Starts xine or vdr-sxfe
#


description 	"yavdr-frontend"
author      	"Gerald Dachs <gda@dachsweb.de>"




start on ((started vdr and stopped openbox-tools) or vdr-frontend-restart or resume)
stop on stopping vdr or suspend or stopping openbox


nice -10
respawn


pre-start script
if [ -e /tmp/.standalone ]; then
   vdr-dbus-send /Remote remote.Disable ||:
   exit 1
fi
end script


env HOME=/var/lib/vdr
#env XINE_BUFFER_LOG=1
env USE_AUTOCROP=0
export USE_AUTOCROP




script
export DISPLAY=:1`dbget vdr.tempdisplay`
export __GL_SYNC_TO_VBLANK=1


export __GL_SYNC_DISPLAY_DEVICE=`/usr/bin/dbget system.x11.display.0.device`






HUDOPTS=""
XINELIBOUTPUTOPTS="--post tvtime:method=use_vo_driver --reconnect --audio=alsa --syslog --silent --tcp"
XINELIBOUTPUTOPTS="--post=dfatmo:driver=serial,driver_param=/dev/ttyACM0;proto:karatelight,top=2,bottom=2,left=2,right=2"
CONFIG="--config /etc/vdr-sxfe/config_xineliboutput"


while  ! netcat -z localhost 37890; do sleep 0.1; done;
while ! grep -q "^ 1" /proc/asound/cards ; do sleep 1 ; done
while ! grep -q "^ 0" /proc/asound/cards ; do sleep 1 ; done
exec start-stop-daemon --start --exec /usr/bin/vdr-sxfe --user vdr --chuid vdr \
-- $HUDOPTS $XINELIBOUTPUTOPTS $CONFIG xvdr://127.0.0.1:37890 &> /tmp/vdr-frontend.log
end script


@yaVDR:/etc/init$

Alles anzeigen

Nun der von durchflieger neue logoutput von der neu erstellten vdr-frontend.log:

Code

[1841] [scrnsaver] Error: The name org.gnome.ScreenSaver was not provided by any .service files
vo_vdpau: Use lock display synchronization for some vdpau calls
vo_vdpau: vdpau API version : 1
vo_vdpau: vdpau implementation description : NVIDIA VDPAU Driver Shared Library  285.05.09  Fri Sep 23 17:55:14 PDT 2011
vo_vdpau: maximum video surface size for chroma type 4:2:2 is 4096x4096
vo_vdpau: maximum video surface size for chroma type 4:2:0 is 4096x4096
vo_vdpau: maximum output surface size is 16384x16384
vo_vdpau: using 4 output surfaces for display queue
vdr-sxfe 1.0.90-cvs  (build with xine-lib 1.1.90, using xine-lib 1.1.90)


Post plugins: dfatmo:driver=serial,driver_param=/dev/ttyACM0;proto:karatelight,top=2,bottom=2,left=2,right=2
Config file: /etc/vdr-sxfe/config_xineliboutput
VDR Server: xvdr://127.0.0.1:37890


video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
[1841] [vdr-fe]	Detected 4 CPUs
[1841] [vdr-fe]	Enabling FFmpeg multithreaded video decoding
[1841] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
[1841] [input_vdr] Server greeting: VDR-1.7.21 xineliboutput-1.0.90-cvs READY
[1841] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
[1841] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1826/pipe.0
[1841] [input_vdr] Data stream connected (PIPE)
[1841] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
video_out_vdpau: clear surface: 10
[1841] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
[1841] [demux_vdr] Using decoder "FFmpeg" for H.264 video
video_out_vdpau: clear surface: 11




Press Esc to exit


[2017] [console]   read_key: read(stdin) failed: no stdin
[2017] [console]   Keyboard thread terminated
vdpau_set_property: property=8, value=100
vdpau_set_property: property=2, value=0
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vdpau_set_property: property=3, value=100
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vdpau_set_property: property=5, value=0
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vdpau_set_property: property=24, value=0
vo_vdpau: disable sharpness.
vdpau_set_property: property=25, value=0
vo_vdpau: disable noise reduction.
vdpau_set_property: property=4, value=100
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vdpau_set_property: property=1, value=0
video_out_vdpau: clear surface: 12
video_out_vdpau: vo_vdpau: recreate mixer to match frames: width=720, height=576, chroma=0
vo_vdpau: deinterlace: none
vo_vdpau: set_scaling_level=0
vo_vdpau: enabled features: inverse_telecine=0
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vo_vdpau: skip_chroma = 1
vo_vdpau: background_color = 0
video_out_vdpau: vo_vdpau: output_surface size update
video_out_vdpau: vo_vdpau: VO_STILL_IMAGE
[2016] [demux_vdr] PMT changed, resetting demuxer
[2015] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels
video_out_vdpau: clear surface: 13
video_out_vdpau: overlay begin
video_out_vdpau: overlay[0] rle  unscaled  ycbcr  460x71@1460,0  extend 0x0  hili rect -1,-1--1,-1
video_out_vdpau: overlay[1] rle  unscaled  ycbcr  1641x286@140,740  extend 0x0  hili rect -1,-1--1,-1
video_out_vdpau: overlay[0] create render surface 720x576
video_out_vdpau: overlay[0] put ycbcr 0,0:460,71
video_out_vdpau: overlay[1] create render surface 1641x286
video_out_vdpau: overlay[1] put ycbcr 0,0:1641,286
video_out_vdpau: overlay output 1780x1026 -> 140,0:1920,1026  video window 240,0:1680,1080
video_out_vdpau: overlay create output surface 1780x1026
video_out_vdpau: overlay init output surface 1780x1026
video_out_vdpau: overlay[0] render 460x71 -> 1320,0:1780,71
video_out_vdpau: overlay[1] render 1641x286 -> 0,740:1641,1026
video_out_vdpau: vo_vdpau: output_surface size update
video_out_vdpau: vo_vdpau: VO_STILL_IMAGE
video_out_vdpau: clear surface: 17
video_out_vdpau: overlay begin
video_out_vdpau: overlay[0] rle  unscaled  ycbcr  460x71@1460,0  extend 0x0  hili rect -1,-1--1,-1
video_out_vdpau: overlay[1] rle  unscaled  ycbcr  1641x286@140,740  extend 0x0  hili rect -1,-1--1,-1
video_out_vdpau: overlay[0] put ycbcr 0,0:460,71
video_out_vdpau: overlay[1] put ycbcr 0,0:1641,286
video_out_vdpau: overlay output 1780x1026 -> 140,0:1920,1026  video window 240,0:1680,1080
video_out_vdpau: overlay init output surface 1780x1026
video_out_vdpau: overlay[0] render 460x71 -> 1320,0:1780,71
video_out_vdpau: overlay[1] render 1641x286 -> 0,740:1641,1026
video_out_vdpau: vo_vdpau: output_surface size update
video_out_vdpau: vo_vdpau: VO_STILL_IMAGE
video_out_vdpau: clear surface: 10
vdpau_set_property: property=0, value=1
vo_vdpau: deinterlace: temporal
video_out_vdpau: clear surface: 18
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
video_out_vdpau: clear surface: 20
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
video_out_vdpau: clear surface: 21
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
video_out_vdpau: clear surface: 22
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
video_out_vdpau: clear surface: 23
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
video_out_vdpau: vo_vdpau: soft_surface size update
******** Missing refframes, dropping. nrf=5 lo=1 prefs=0 l1=1 brefs=1 type=1 (10 fps)
video_out_vdpau: vo_vdpau: output_surface size update
video_out_vdpau: clear surface: 24
video_out_vdpau: clear surface: 25
video_out_vdpau: clear surface: 26
video_out_vdpau: clear surface: 27
video_out_vdpau: clear surface: 28
video_out_vdpau: vo_vdpau: recreate mixer to match frames: width=1280, height=720, chroma=0
video_out_vdpau: clear surface: 29
vo_vdpau: deinterlace: bob
vo_vdpau: set_scaling_level=0
vo_vdpau: enabled features: inverse_telecine=0
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=1 studio_levels=0
vo_vdpau: skip_chroma = 1
vo_vdpau: background_color = 0
video_out_vdpau: overlay output 1780x1026 -> 140,0:1920,1026  video window 0,0:1920,1080
video_out_vdpau: clear surface: 30
video_out_vdpau: clear surface: 31
video_out_vdpau: clear surface: 32
video_out_vdpau: clear surface: 33
video_out_vdpau: clear surface: 34
video_out_vdpau: vo_vdpau: update_frame - destroy surface
video_out_vdpau: clear surface: 13
video_out_vdpau: vo_vdpau: update_frame - destroy surface
video_out_vdpau: clear surface: 10
video_out_vdpau: vo_vdpau: update_frame - destroy surface
video_out_vdpau: clear surface: 12
video_out_vdpau: vo_vdpau: update_frame - destroy surface
video_out_vdpau: clear surface: 17
video_out_vdpau: vo_vdpau: update_frame - destroy surface
video_out_vdpau: clear surface: 11
video_out_vdpau: overlay begin
video_out_vdpau: overlay[1] destroy render surface
@yaVDR:/tmp$

Alles anzeigen

Grüßle

durchflieger · 21. November 2011

Dr. n00b

Du musst verbose des xineliboutput zuschalten damit mehr Protokolliert wird!
Ändere mal in der vdr-frontend.conf die zwei Zeilen folgendermassen:

Code

XINELIBOUTPUTOPTS="--post tvtime:method=use_vo_driver --reconnect --audio=alsa --syslog --verbose --tcp"
XINELIBOUTPUTOPTS="$XINELIBOUTPUTOPTS --post=dfatmo:driver=serial,driver_param=/dev/ttyACM0;proto:karatelight,top=2,bottom=2,left=2,right=2"

Dr. n00b · 22. November 2011

So da isser wieder :- )

durchflieger. Hab mal deine Einstellungen so übernommen wie du vorgeschlagen hast.
Funktioniert jedoch nicht die Leds bleiben noch aus.

Grüßle,
Doc.

Hier nun der vdr-frontendlog:

Code

vdr-sxfe 1.0.90-cvs  (build with xine-lib 1.1.90, using xine-lib 1.1.90)


Post plugins: tvtime:method=use_vo_driver
Automatic reconnection enabled
Audio driver: alsa
Verbose mode
Protocol: TCP
Post plugins: tvtime:method=use_vo_driver;dfatmo:driver=serial,driver_param=/dev/ttyACM0;proto:karatelight,top=2,bottom=2,left=2,right=2
Config file: /etc/vdr-sxfe/config_xineliboutput
VDR Server: xvdr://127.0.0.1:37890


Loaded configuration from file '/etc/vdr-sxfe/config_xineliboutput'
Benchmarking memcpy methods (smaller is better):
    	libc memcpy() : 3090258328
    	linux kernel memcpy() : 3135523471
    	MMX  memcpy() : 3206597650
    	MMXEXT memcpy() : 3290572197
    	SSE memcpy() : 3373808798
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_ao_out_file.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_qt.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_none.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_vdpau.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_yuv.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_iff.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_dvb.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_xvmc.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_real.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_mpeg_elem.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_mpeg_ts.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_spuhdmv.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_fli.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_vdpau_mpeg12.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_vcdo.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_audio.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_audio.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_audio.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_audio.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_audio.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_audio.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_sputext.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_sputext.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_flac.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_flac.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_cdda.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_vaapi.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_gdk_pixbuf.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_ao_out_jack.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_http.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_spudvb.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_mpeg.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_pnm.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_real.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_real.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_spucc.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_yuv_frames.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_image.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_spucmml.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_xvdr.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_xvdr.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_mpeg2.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_flv.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_aa.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_xiph.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_xiph.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_xiph.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_xiph.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_xiph.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_xcbxv.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_lpcm.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_ff.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_ff.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_ff.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_ff.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_wavpack.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_wavpack.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_vc1_es.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_vcd.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_mad.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_rtp.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_vdpau_mpeg4.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_a52.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_ao_out_alsa.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_pva.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_file.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_ao_out_pulseaudio.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_ao_out_oss.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_mng.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_xshm.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_xshm.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_stdin_fifo.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_dvaudio.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_opengl.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_mpc.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_yuv4mpeg2.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_spu.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_rtsp.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_games.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_rawdv.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_fb.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_dxr3_video.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_ao_out_none.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_dts.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_mpeg_pes.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_playlist.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_avi.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_raw.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_v4l2.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_bitplane.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_vdpau_h264_alter.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_faad.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_mpeg_block.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_gsm610.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_sdl.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_asf.so found
load_plugins: cannot open plugin lib /usr/lib/xine/plugins/2.0/xineplug_ao_out_esd.so:
libesd.so.0: cannot open shared object file: No such file or directory
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_vdpau_vc1.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_image.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_vdpau_h264.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_smb.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_caca.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_rgb.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_autocrop.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_dfatmo.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_visualizations.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_visualizations.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_visualizations.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_planar.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_mosaico.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_audiochannel.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_goom.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_swscale.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_swscale.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_audio_filters.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_audio_filters.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_audio_filters.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_audio_filters.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_switch.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/post/xineplug_post_tvtime.so fovo_vdpau: Use lock display synchronization for some vdpau calls
vo_vdpau: vdpau API version : 1
vo_vdpau: vdpau implementation description : NVIDIA VDPAU Driver Shared Library  270.41.06  Mon Apr 18 15:13:22 PDT 2011
vo_vdpau: maximum video surface size for chroma type 4:2:2 is 4096x4096
vo_vdpau: maximum video surface size for chroma type 4:2:0 is 4096x4096
vo_vdpau: maximum output surface size is 16384x16384
vo_vdpau: using 4 output surfaces for display queue
und
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_matroska.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_xxmc.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_dvd.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_nsf.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_nsf.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vdr.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vdr.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vdr.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vdr.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_nsv.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_slave.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_mms.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_xcbshm.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_xv.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_xv.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_dxr3.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_vo_out_dxr3.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_inp_net.so found
load_plugins: cannot open plugin lib /usr/lib/xine/plugins/2.0/xineplug_inp_gnome_vfs.so:
libgnomevfs-2.so.0: cannot open shared object file: No such file or directory
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_dmx_modplug.so found
load_plugins: plugin /usr/lib/xine/plugins/2.0/xineplug_decode_dxr3_spu.so found
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out_vdpau: vo_vdpau: vdpau_alloc_frame
video_out: can't raise nice priority by 2: Operation not permitted
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo (4-channel not enabled in xine config) (4.1-channel not enabled in xine config) (5-ch
annel not enabled in xine config) (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not enabled in xine config)
video_decoder: can't raise nice priority by 1: Operation not permitted
DFAtmo: open plugin
DFAtmo: plugin opened
DFAtmo: set parameters
DFAtmo: set parameters
DFAtmo: open plugin
DFAtmo: plugin opened
DFAtmo: dispose plugin
DFAtmo: final dispose
DFAtmo: disposed plugin
DFAtmo: open plugin
DFAtmo: plugin opened
DFAtmo: dispose plugin
DFAtmo: final dispose
DFAtmo: disposed plugin
DFAtmo: open plugin
DFAtmo: plugin opened
DFAtmo: dispose plugin
DFAtmo: final dispose
DFAtmo: disposed plugin
Available video drivers: vdpau aadxr3 dxr3 xv vaapi raw opengl xshm caca aa xxmc none sdl fb xvmc
Available audio drivers: pulseaudio alsa oss jack none file
Available post plugins:  fftscope fftgraph oscope expand fill invert eq denoise3d boxblur eq2 unsharp pp noise mosaico audiochannel goom warp swscale upmix u
pmix_mono stretch volnorm switch tvtime vdr vdr_video vdr_audio dfatmo autocrop
Available input plugins: v4l2 CD http pnm xvdr VCD rtp FILE stdin rtsp smb DVD VDR mms tcp VCDO DVB
Available demux plugins: xvdr anx image real iff mpeg-ts fli aiff flac realaudio snd tta voc vox flashvideo ogg pva mng yuv4mpeg2 wve idcin ipmovie vqa wc3mo
vie roq str film smjpeg fourxm vmd mpeg_pes playlist avi mpeg_block asf matroska nsfdemux nsv slave modplug quicktime mpeg dts ac3 wav cdda rawdv mpc mp3 shn
 sputext yuv_frames wavpack vc1es elem aac aud
Available audio decoder plugins: gsm610 wavpackdec mad flacdec ffmpegaudio realadec speex a/52 dvaudio mpc nsfdec vorbis faad dts pcm
Available video decoder plugins: dxr3-mpeg2 vdpau_h264_alter vdpau_vc1 vdpau_mpeg12 realvdec mpeg2 vdpau_h264 gdkpixbuf image ffmpegvideo theora bitplane rgb
 yuv vdpau_mpeg4 ffmpeg-wmv9 ffmpeg-wmv8
Available SPU decoder plugins:   dxr3-spudec spudec spuhdmv spucc spucmml spudvb sputext
xine: found input plugin  : VDR (Video Disk Recorder) input plugin
input cache plugin disabled
video_out_vdpau: clear surface: 10
xine: found demuxer plugin: XVDR demux plugin
video_out_vdpau: clear surface: 11
Press Esc to exit


vdpau_set_property: property=8, value=100
vdpau_set_property: property=2, value=0
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vdpau_set_property: property=3, value=100
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vdpau_set_property: property=5, value=0
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vdpau_set_property: property=24, value=0
vo_vdpau: disable sharpness.
vdpau_set_property: property=25, value=0
vo_vdpau: disable noise reduction.
vdpau_set_property: property=4, value=100
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vdpau_set_property: property=1, value=0
prebuffer=14400 pts
av_offset=0 pts
video_out_vdpau: clear surface: 12
video_out_vdpau: overlay begin
video_out_vdpau: overlay[0] rle  unscaled  ycbcr  172x37@547,0  extend 0x0  hili rect -1,-1--1,-1
video_out_vdpau: overlay[1] rle  unscaled  ycbcr  615x153@52,394  extend 0x0  hili rect -1,-1--1,-1
video_out_vdpau: overlay[0] create render surface 320x240
video_out_vdpau: overlay[0] put ycbcr 0,0:172,37
video_out_vdpau: overlay[1] create render surface 615x153
video_out_vdpau: overlay[1] put ycbcr 0,0:615,153
video_out_vdpau: vo_vdpau: recreate mixer to match frames: width=720, height=576, chroma=0
vo_vdpau: deinterlace: none
vo_vdpau: set_scaling_level=0
vo_vdpau: enabled features: inverse_telecine=0
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=0 studio_levels=0
vo_vdpau: skip_chroma = 1
vo_vdpau: background_color = 0
video_out_vdpau: overlay output 667x547 -> 52,0:719,547  video window 240,0:1680,1080
video_out_vdpau: overlay create output surface 720x576
video_out_vdpau: overlay init output surface 667x547
video_out_vdpau: overlay[0] render 172x37 -> 495,0:667,37
video_out_vdpau: overlay[1] render 615x153 -> 0,394:615,547
video_out_vdpau: vo_vdpau: output_surface size update
video_out_vdpau: vo_vdpau: VO_STILL_IMAGE
video_out_vdpau: clear surface: 10
video_out_vdpau: clear surface: 16
video_out_vdpau: overlay begin
video_out_vdpau: overlay[0] rle  unscaled  ycbcr  460x71@1460,0  extend 0x0  hili rect -1,-1--1,-1
video_out_vdpau: overlay[1] rle  unscaled  ycbcr  1641x286@140,740  extend 0x0  hili rect -1,-1--1,-1
video_out_vdpau: overlay[0] destroy render surface
DFAtmo: video open
DFAtmo: output driver closed
DFAtmo: output driver unloaded
video_out_vdpau: overlay[0] create render surface 720x576
vdpau_set_property: property=0, value=1
vo_vdpau: deinterlace: temporal
DFAtmo: output driver loaded
DFAtmo: serial port device: '/dev/ttyACM0'
DFAtmo: serial port speed: 38400
DFAtmo: output driver opened
DFAtmo: no channels configured!
DFAtmo: video opened
video_out_vdpau: overlay[0] put ycbcr 0,0:460,71
video_out_vdpau: overlay[1] destroy render surface
video_out_vdpau: overlay[1] create render surface 1641x286
video_out_vdpau: overlay[1] put ycbcr 0,0:1641,286
video_out_vdpau: overlay output 1780x1026 -> 140,0:1920,1026  video window 240,0:1680,1080
video_out_vdpau: overlay destroy output surface
video_out_vdpau: overlay create output surface 1780x1026
video_out_vdpau: overlay init output surface 1780x1026
video_out_vdpau: overlay[0] render 460x71 -> 1320,0:1780,71
video_out_vdpau: overlay[1] render 1641x286 -> 0,740:1641,1026
video_out_vdpau: vo_vdpau: output_surface size update
video_out_vdpau: vo_vdpau: VO_STILL_IMAGE
video_out_vdpau: clear surface: 17
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
video_out_vdpau: clear surface: 19
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
video_out_vdpau: clear surface: 20
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
video_out_vdpau: clear surface: 21
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
video_out_vdpau: clear surface: 22
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
******** Missing refframes, dropping. nrf=5 lo=1 prefs=1 l1=1 brefs=0 type=1 (10 fps)
video_out_vdpau: clear surface: 23
video_out_vdpau: clear surface: 24
video_out_vdpau: clear surface: 25
video_out_vdpau: vo_vdpau: recreate mixer to match frames: width=1280, height=720, chroma=0
vo_vdpau: deinterlace: bob
vo_vdpau: set_scaling_level=0
vo_vdpau: enabled features: inverse_telecine=0
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0.000000, saturation=1.000000, contrast=1.000000, brightness=0.000000, color_standard=1 studio_levels=0
vo_vdpau: skip_chroma = 1
vo_vdpau: background_color = 0
video_out_vdpau: overlay output 1780x1026 -> 140,0:1920,1026  video window 0,0:1920,1080
video_out_vdpau: vo_vdpau: output_surface size update
video_out_vdpau: vo_vdpau: output_surface size update
video_out_vdpau: clear surface: 26
video_out_vdpau: clear surface: 27
video_out_vdpau: clear surface: 28
video_out_vdpau: clear surface: 29
video_out_vdpau: clear surface: 30
video_out_vdpau: clear surface: 31
video_out_vdpau: clear surface: 32
video_out_vdpau: clear surface: 33
video_out_vdpau: clear surface: 34
video_out_vdpau: clear surface: 35
video_out_vdpau: vo_vdpau: update_frame - destroy surface
video_out_vdpau: clear surface: 10
video_out_vdpau: vo_vdpau: update_frame - destroy surface
video_out_vdpau: clear surface: 12
video_out_vdpau: vo_vdpau: update_frame - destroy surface
video_out_vdpau: clear surface: 16
video_out_vdpau: overlay begin
video_out_vdpau: overlay[1] destroy render surface

Alles anzeigen

durchflieger · 22. November 2011

Dr. n00b

da gibt es doch noch ein Problem im Zusammenspiel DFAtmo mit dem xineliboutput bzw. xine player.
Die Player mögen kein Semikolon in den Plugin-Parametern.
Ich habe das jetzt im DFAtmo gefixt. Zusätzlich zum Semikolon kann jetzt auch das Ampersand Zeichen '&' verwendet werden.

Die Parameterzeile muss jetzt so bei dir geändert werden:

Code

XINELIBOUTPUTOPTS="$XINELIBOUTPUTOPTS --post=dfatmo:driver=serial,driver_param=/dev/ttyACM0&proto:karatelight,top=2,bottom=2,left=2,right=2"

Natürlich muss du das DFAtmo vorher aus dem git holen und neu übersetzen und installieren.

Gruss
durchflieger

urknall · 23. November 2011

Neuer git Stand in meinem PPA, kann einfach per dist-upgrade upgedated werden...

Grüße

Dr. n00b · 25. November 2011

Hi Danke für eure Hilfe.
Ich muß not gedrungen eine Pause einlegen... Habe mein Mainboard zum Händer zurück gesendet.
Muss mir erst wieder eins bestellen...

To Be continued... ;- )

Dr. n00b · 26. November 2011

Zitat von urknall
Hallo,

ich hab mal ein ppa aufgesetzt und das dfatmo Plugin für natty und oneiric zur Verfügung gestellt:

https://launchpad.net/~urknall/+archive/stable-vdr
Code
sudo echo "deb http://ppa.launchpad.net/urknall/stable-vdr/ubuntu natty main" >> /etc/apt/sources.list.d/urknall.list &&  sudo echo "deb http://ppa.launchpad.net/urknall/stable-vdr/ubuntu natty main" >> /etc/apt/sources.list.d/urknall.list && sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 2FB94015 && sudo apt-get --quiet update
sudo apt-get install dfatmo libxine-dfatmo-plugin
Für nicht natty Benutzer analog vorgehen...

Grüße Urknall
Alles anzeigen

Hi Urknall. Wenn ich yavdr neu installiert habe muss ich doch auch wieder deine ppa hinzufügen. (habe ich auch gemacht) jedoch findet er mit apt-get install dfatmo
keine Dateien.

# apt-get install dfatmo
Paketlisten werden gelesen... Fertig
AbhÃ¤ngigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
E: Paket dfatmo kann nicht gefunden werden

Grüßle,
Doc.

Dr. n00b · 26. November 2011

Komisch neues Board neue Probleme *grummel*
Da ich aktuell meine TV Karte noch nicht benutzen, da anderes Board, wollte ich mich nach der Neuinstallation damit zu friedern geben, dass das Karatelight unter xbmc erstmal wieder läuft.
Pustekuchen. Er findet mein /dev/ttyACM0 unter xbmc nicht mehr bzw. sagt er habe kein Zugriff darauf.

Nach dem ich die Paket nicht per apt-get install... holen konnte bin ich nach der altern Anleitung vorgegangen.

Step 1 apt-get install git libusb-1.0-0-dev python-dev libxine-dev debhelper zip
Step 2 bin nach /usr/local/atmo
Step 3 git https://github.com/durchflieger/DFAtmo.git
Step 4 cd DFatmo
Step 5 dpkg-buildpackage -b -D -tc -sd -us -uc
Step 6 cd ..
Step 7 dpkg -i dfatmo_0.1-0_amd64.deb sudo dpkg -i libxine-dfatmo-plugin_0.1-0_amd64.deb

Grüßle

urknall · 26. November 2011

Das Plugin ist von staple-vdr nach main umgezogen, wie ich auch schon vorher gepostet hatte:

Zitat von urknall
Nein ich habe noch das alte Classic (Serial) Atmolight aus der Sammelbestellung hier aus dem Forum...

Update:

Ich habe das Ganze mal nach Main PPA verschoben, dann passt das besser zur PPA Struktur von yavdr zusammen:

UPDATE:

Hallo,

ich hab mal ein ppa aufgesetzt und das dfatmo Plugin für natty und oneiric zur Verfügung gestellt:

https://launchpad.net/~urknall/+archive/stable-vdr
Code
sudo echo "deb http://ppa.launchpad.net/urknall/main/ubuntu natty main" >> /etc/apt/sources.list.d/urknall.list &&  sudo echo "deb http://ppa.launchpad.net/urknall/main/ubuntu natty main" >> /etc/apt/sources.list.d/urknall.list && sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 2FB94015 && sudo apt-get --quiet updatesudo apt-get install dfatmo libxine-dfatmo-plugin
Für nicht natty Benutzer analog vorgehen...

Grüße Urknall
Alles anzeigen

slime · 28. November 2011

Zitat von Dr. n00b

Pustekuchen. Er findet mein /dev/ttyACM0 unter xbmc nicht mehr bzw. sagt er habe kein Zugriff darauf.

Dann solltest du erstmal mit dmesg überprüfen ob das device beim anstecken angelegt wird.
Dann kucken wie die rechte darauf sind (ls -la /dev/ttyACM0).
Evtl. dann den user der xbmc ausführt noch in die passende Gruppe stecken.

Fozzybär · 2. Dezember 2011

ist das denn richtig?

Code

htpc@htpc:~$ ls -la /dev/tty0
crw--w---- 1 root tty 4, 0 2011-12-02 21:15 /dev/tty0

Fozzybär · 2. Dezember 2011

Hallo nochmal,
nachdem ich nun zwei Stunden lang das Forum gelesen habe und nicht einmal meine lämpchen angingen, wollte ich mich diesem Thread anschiessen.

Jedoch habe ich kein Karatelight und ich denke, da liegt auch mein "problem" alle Post die ich fand, haben das Thema Karatelight behandelt.

Also die beiden Pakete konnte ich direkt via apt-get insallieren und dmesg schmeißt auch folgendes aus:

Code

[	0.000000] console [tty0] enabled
[   16.496552] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0

Also müsste zumindest der Treiber gefunden und geladen sein?

Die Rechte sehen wie folgt aus:

Code

root@htpc:/home/htpc# ls -la /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 2011-12-02 23:27 /dev/ttyUSB0

Ein Testblinken mit:

Code

echo hallo > /dev/ttyUSB0

brachte mir keine "erleuchttung"

Ich habe lt Anleitung von Seahawk (hier der link - 2.7.2 - xine-post-atmo Plugin) ein neues Template für xine erstellt (den Inhalt 1 zu 1 in zwei neuen Zeilen eingefügt).

Ich habe das mitgelieferte XBMC Plugin installiert, aktiviert und die settings.xml von Carsten drüber kopiert und COM2 in ttyUSB0 geändert. Nach einem neustart von
XBMC -> kein Lichtlein brennt. Er meckert mich an, dass ttyUSB0 kein device oder dir ist.

Was mache ich nur falsch? Kann mir jemand bitte unter die Arme greifen?

PS: Den Funktionstest unter Windows hat es tadellos bestanden.

urknall · 3. Dezember 2011

Die Anleitung von seahawk ist für das lib-xine-atmo und NICHT für das dfatmo.

Der Aufruf in der vdr-frontend ist jetzt leicht anders und muss so aussehen:

Code

XINEOPTS="$XINEOPTS --post=dfatmo:driver=serial,driver_param=/dev/ttyUSB0...

Fozzybär · 3. Dezember 2011

Zitat von urknall

XINELIBOUTPUTOPTS="$XINELIBOUTPUTOPTS --post=dfatmo:driver=classic,driver_param=/dev/ttyUSB

Hallo
ich teste es sofort

urknall · 3. Dezember 2011

Sorry UPDATE:

driver=serial statt driver=classic, habs korrigiert. Hatte ich vergessen...
Schau nochmal in meinen vorherigen Post, du nutzt ja xine, oder?

Fozzybär · 3. Dezember 2011

Zitat von urknall

Sorry UPDATE:

driver=serial statt driver=classic, habs korrigiert. Hatte ich vergessen...
Schau nochmal in meinen vorherigen Post, du nutzt ja xine, oder?

Danke,
ja - ich nutze xine.

Irgendwie ist da bei mir der Fehlerteufel drin:

Code

script
export DISPLAY=:1`dbget vdr.tempdisplay`


#ASPECT_RATIO="anamorphic"
GEOMETRY=`xrandr | grep "\*" | cut -d" " -f4`


## Adding Xine ATMO-Post Plugin
#XINEOPTS="$XINEOPTS --post=dfatmo:driver=serial,driver_param=/dev/ttyUSB0,top=1,bottom=1,left=1,right=1,brightness=150,enabled=1,filter_delay=2000"


XINEOPTS="-G $GEOMETRY -A alsa --config /etc/xine/config --keymap=file:/etc/xine/keymap --post vdr --post vdr_video --post vdr_audio --verbose=2 --no-gui --no-logo --no-splash --deinterlace -pq"
XINEOPTS="$XINEOPTS --post=atmo:driver=serial,driver_param=/dev/ttyUSB0,top=1,bottom=1,left=1,right=1,brightness=150,analyze_size=0,overscan=0,enabled=1"


test -f /etc/default/xine && . /etc/default/xine
XINEOPTS="-G $GEOMETRY -A alsa --config /etc/xine/config --keymap=file:/etc/xine/keymap --post vdr --post vdr_video --post vdr_audio --verbose=2 --no-gui --no-logo --no-splash --deinterlace -pq"

Alles anzeigen

oder?

Normal müsst er doch schon auf ..

Code

echo hallo > /dev/ttyUSB0

..reagieren?

DFatmo Plugin unter yaVDR 0.5 Final mit Karatelightsupport | Installationsanleitung

Jetzt mitmachen!

Teilen