Moin,
ich habe nach der Installation des ReelVDR auf meiner Activy 3x0 kein Bild über meine TT S2 3200, obwohl die eigentlich out of the box starten sollten. Der VDR startet und arbeitet wie er soll. Bis auf Live TV eben.
Die Karten werden aber erkannt.
ZitatAlles anzeigenroot@ReelBox:~# lspci
00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02)
00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)
01:05.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
01:06.0 VGA compatible controller: Intergraphics Systems CyberPro 5000 (rev 03)
01:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
01:08.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 10)
01:09.0 Multimedia controller: Micronas USA, Inc. Device 8100
01:0a.0 Multimedia controller: Sigma Designs, Inc. EM840x REALmagic DVD/MPEG-2 Audio/Video Decoder (rev 01)
ZitatAlles anzeigenroot@ReelBox:~# lsmod
Module Size Used by
ppdev 5259 0
nfsd 238967 2
exportfs 3437 1 nfsd
nfs 265078 0
lockd 64849 2 nfsd,nfs
nfs_acl 2245 2 nfsd,nfs
auth_rpcgss 33767 2 nfsd,nfs
jfs 172461 1
sunrpc 193053 6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
snd_intel8x0 25588 0
lnbp21 1674 2
snd_ac97_codec 100646 1 snd_intel8x0
ac97_bus 1002 1 snd_ac97_codec
stb6100 6172 2
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70694 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
stb0899 33018 2
hdshm 11945 5
snd_seq_dummy 1338 0
snd_seq_oss 26722 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
hwmon_vid 2298 0
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
budget_ci 19989 7
eeprom 3944 0
ir_common 38875 1 budget_ci
snd_timer 19098 2 snd_pcm,snd_seq
budget_core 7812 1 budget_ci
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
fbcon 35102 71
dvb_core 86206 2 budget_ci,budget_core
i2c_i801 7722 0
snd 54180 10 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
tileblit 2031 1 fbcon
saa7146 15268 2 budget_ci,budget_core
font 7557 1 fbcon
ttpci_eeprom 1489 1 budget_core
psmouse 63245 0
soundcore 6620 1 snd
intel_agp 24375 0
lp 7028 0
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
serio_raw 3978 0
snd_page_alloc 7076 2 snd_intel8x0,snd_pcm
shpchp 28820 0
agpgart 31724 1 intel_agp
parport 32635 2 ppdev,lp
uinput 6312 1
e100 28211 0
mii 4381 1 e100
uvesafb 22297 2
Zitatroot@ReelBox:~# dmesg | grep dvb
[ 17.801990] saa7146: register extension 'budget_ci dvb'.
[ 17.802524] budget_ci dvb 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 17.840298] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:01:05.0/input/input5
[ 19.310875] budget_ci dvb 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 19.350813] input: Budget-CI dvb ir receiver saa7146 (1) as /devices/pci0000:00/0000:00:1e.0/0000:01:07.0/input/input7
Folgende Ausgaben habe ich auf dem Schirm:
ZitatAlles anzeigenroot@ReelBox:~# tail -f /var/log/syslog
Jan 17 07:29:37 ReelBox kernel: [ 923.327408] stb6100_set_frequency: frequency out of range: 11836000 kHz
Jan 17 07:29:37 ReelBox kernel: [ 923.419508] stb6100_set_frequency: frequency out of range: 12188000 kHz
Jan 17 07:29:38 ReelBox kernel: [ 923.903220] stb6100_set_frequency: frequency out of range: 11836000 kHz
Jan 17 07:29:38 ReelBox kernel: [ 924.023384] stb6100_set_frequency: frequency out of range: 12188000 kHz
Jan 17 07:29:38 ReelBox kernel: [ 924.495338] stb6100_set_frequency: frequency out of range: 11836000 kHz
Jan 17 07:29:38 ReelBox kernel: [ 924.623402] stb6100_set_frequency: frequency out of range: 12188000 kHz
Jan 17 07:29:39 ReelBox kernel: [ 925.071361] stb6100_set_frequency: frequency out of range: 11836000 kHz
ZitatAlles anzeigenroot@ReelBox:~# less /var/log/messages | grep adapter
Jan 17 07:35:52 ReelBox kernel: [ 17.580680] DVB: registering new adapter (TT-Budget S2-3200 PCI)
Jan 17 07:35:52 ReelBox kernel: [ 17.617442] adapter has MAC addr = 00:d0:5c:68:37:b6
Jan 17 07:35:52 ReelBox kernel: [ 18.903070] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
Jan 17 07:35:52 ReelBox kernel: [ 18.903813] DVB: registering new adapter (TT-Budget S2-3200 PCI)
Jan 17 07:35:52 ReelBox kernel: [ 18.939416] adapter has MAC addr = 00:d0:5c:68:30:6d
Jan 17 07:35:52 ReelBox kernel: [ 19.260820] DVB: registering adapter 1 frontend 0 (STB0899 Multistandard)...
Jan 17 07:36:12 ReelBox kernel: [ 43.048132] DVB: adapter 0 frontend 0 frequency 11836000 out of range (950000..2150000)
Jan 17 07:36:14 ReelBox kernel: [ 45.625718] DVB: adapter 1 frontend 0 frequency 12188000 out of range (950000..2150000)
Der VDR lädt die Karten, so scheint's, auch problemlos:
ZitatAlles anzeigenJan 17 07:36:08 ReelBox vdr: [1473] probing /dev/dvb/adapter0/frontend0
Jan 17 07:36:08 ReelBox vdr: [1473] creating cDvbDevice
Jan 17 07:36:08 ReelBox vdr: [1473] new device number 1
Jan 17 07:36:08 ReelBox vdr: [1631] video directory scanner thread started (pid=1473, tid=1631)
Jan 17 07:36:08 ReelBox vdr: [1631] video directory scanner thread ended (pid=1473, tid=1631)
Jan 17 07:36:08 ReelBox vdr: [1630] video directory scanner thread started (pid=1473, tid=1630)
Jan 17 07:36:08 ReelBox vdr: [1630] video directory scanner thread ended (pid=1473, tid=1630)
Jan 17 07:36:09 ReelBox vdr: [1473] frontend 0/0 provides DVB-S2 with QPSK ("STB0899 Multistandard")
Jan 17 07:36:09 ReelBox vdr: [1473] probing /dev/dvb/adapter1/frontend0
Jan 17 07:36:09 ReelBox vdr: [1473] creating cDvbDevice
Jan 17 07:36:09 ReelBox vdr: [1473] new device number 2
Jan 17 07:36:09 ReelBox vdr: [1634] section handler thread started (pid=1473, tid=1634)
Jan 17 07:36:09 ReelBox vdr: [1633] tuner on frontend 0/0 thread started (pid=1473, tid=1633)
Jan 17 07:36:09 ReelBox vdr: [1473] frontend 1/0 provides DVB-S2 with QPSK ("STB0899 Multistandard")
Jan 17 07:36:09 ReelBox vdr: [1473] found 2 DVB devices
Jan 17 07:36:09 ReelBox vdr: [1473] initializing plugin: mcli (0.9.1): NetCeiver Client Application
Jan 17 07:36:09 ReelBox vdr: [1637] section handler thread started (pid=1473, tid=1637)
Jan 17 07:36:09 ReelBox vdr: [1636] tuner on frontend 1/0 thread started (pid=1473, tid=1636)
Jan 17 07:36:09 ReelBox vdr: [1473] initializing plugin: reelbox (): ReelBox plugin
Regards
Globber
Aber kann mein Problem daher rühren, dass die Reelbox diseqc per default aktiviert hat und deshalb mit einer falschen diseqc.conf obigen Fehler produziert?