Hallo!
Gestern Abend hat hotzenplotz die neusten Patches vom durchflieger in das PPA gebracht (libxine, xineliboutput). Damit funktioniert wieder das automatische Aufzoomen (crop). Vielen Dank!
Leider habe weiterhin das Problem das wenn einmal gezoomt wurde dieses erst wieder bei einem HD-Kanal wieder zurück genommen wird. Ein SD 16:9 Sender wird solange weiterhin gezoomt angezeigt. Ist dies bei euch auch so? Oder sind meine Einstellungen falsch?
Meine Einstellungen:
Code
xineliboutput.Audio.Compression = 100
xineliboutput.Audio.Delay = 0
xineliboutput.Audio.Headphone = 0
xineliboutput.Audio.SoftwareVolumeControl = 1
xineliboutput.Audio.Speakers = Pass Through
xineliboutput.Audio.Surround = 0
xineliboutput.Audio.Upmix = 0
xineliboutput.Audio.Visualization = none
xineliboutput.Audio.Visualization.GoomOpts = width=720,height=576,fps=25
xineliboutput.Audio.Visualization.ImageOpts = file:/usr/share/xine/visuals/default.avi
xineliboutput.Media.BrowseFilesDir = /srv/vdr/video.00/film/dvd/Avatar.iso
xineliboutput.Media.BrowseImagesDir = /srv/vdr/video.00
xineliboutput.Media.BrowseMusicDir = /srv/vdr/video.00
xineliboutput.Media.RootDir = /
xineliboutput.OSD.Blending = 1
xineliboutput.OSD.BlendingLowRes = 1
xineliboutput.OSD.ExtSubSize = 4
xineliboutput.OSD.Height = 720
xineliboutput.OSD.Scaling = 1
xineliboutput.OSD.Size = 1920x1080
xineliboutput.OSD.Width = 1280
xineliboutput.Post.denoise3d.chroma = 30
xineliboutput.Post.denoise3d.Enable = 0
xineliboutput.Post.denoise3d.luma = 40
xineliboutput.Post.denoise3d.time = 60
xineliboutput.Post.pp.Enable = 0
xineliboutput.Post.pp.Mode = de
xineliboutput.Post.pp.Quality = 3
xineliboutput.Post.unsharp.chroma_amount = 0
xineliboutput.Post.unsharp.chroma_matrix_height = 3
xineliboutput.Post.unsharp.chroma_matrix_width = 3
xineliboutput.Post.unsharp.Enable = 0
xineliboutput.Post.unsharp.luma_amount = 0
xineliboutput.Post.unsharp.luma_matrix_height = 5
xineliboutput.Post.unsharp.luma_matrix_width = 5
xineliboutput.Video.AspectRatio = 3
xineliboutput.Video.AutoCrop = 1
xineliboutput.Video.AutoCrop.AutoDetect = 0
xineliboutput.Video.AutoCrop.DetectSubs = 1
xineliboutput.Video.AutoCrop.FixedSize = 1
xineliboutput.Video.AutoCrop.SoftStart = 0
xineliboutput.Video.Brightness = -1
xineliboutput.Video.Contrast = -1
xineliboutput.Video.Decoder.H264 = automatic
xineliboutput.Video.Decoder.MPEG2 = automatic
xineliboutput.Video.Deinterlace = tvtime
xineliboutput.Video.DeinterlaceOptions = method=use_vo_driver,cheap_mode=1,pulldown=none,framerate_mode=full,judder_correction=0,use_progressive_frame_flag=0,chroma_filter=0,enabled=1
xineliboutput.Video.HUE = -1
xineliboutput.Video.IBPTrickSpeed = 1
xineliboutput.Video.MaxTrickSpeed = 12
xineliboutput.Video.NoiseReduction = -1
xineliboutput.Video.Overscan = 0
xineliboutput.Video.Saturation = -1
xineliboutput.Video.Sharpness = -1
xineliboutput.Video.SwScale = 0
xineliboutput.Video.SwScale.Aspect = 0
xineliboutput.Video.SwScale.Downscale = 0
xineliboutput.Video.SwScale.Height = 576
xineliboutput.Video.SwScale.Resize = 0
xineliboutput.Video.SwScale.Width = 720
Alles anzeigen
Gruß
Norbert
Nachtrag: Ist der Patch V18 schon enthalten?