softhddevice auf zbox ID86

avanix · 19. Oktober 2014

Hallo,

ich habe eine zotac zbox ID86 als Streamingclient gekauft (Spezifikationen siehe hier: Link zur zotac zbox ID86 ).
Beim einrichten ist mir aufgefallen, dass das Deinterleacing mit VDPAU und softhddevice nur mit "bob" und Scaling "Normal" funktioniert. Wenn ich Scaling "HQ" einstelle oder "Temporal", dann kommen nach kurzer Zeit Bild- und Tonaussetzer auf den 1080i Kanälen (zusammen mit Fehlermeldungen des softhddevice). Die Box hängt per HDMI an einem Philipps 32 Zoll Full HD TV. 50Hz sind eingestellt und laut xrandr auch aktiv (am TV kann ich leider nicht die Bildwiederholfrequenz anzeigen lassen).

Momentan nutze ich MLD 4.0.1-64. Das Phänomen war aber mit yavdr das gleiche.

Ich bräuchte erst mal Eure Meinung, ob ich einen Konfigurationsfehler habe, oder ob die zbox ID86 mit der GT610 eben einfach nicht mehr kann. (Wenn die Box nicht mehr können sollte als bob, dann bräuchte ich gar nicht weiter nach dem Fehler suchen. Ansonsten würde ich die Logfiles sammeln und hier posten).

Danke vorab!

Gruß
avanix

mini73 · 19. Oktober 2014

Benutzt die GPU das RAM? Sind dann zwei Riegel verbaut, damit Dual Channel benutzt werden kann?
Zusätzlich wäre es sinnvoll, die Fehlermeldungen von softhddevice zu posten.

Es gibt auch ein vdpau-Testprogramm, das die Performance misst, weiß aber nicht zu 100%, wie es heißt. qvdpautest oder so ähnlich.

Lars

avanix · 19. Oktober 2014

Ich weiß leider nicht, ob die GPU das RAM mit verwendet. Bei zotac und im Handbuch steht nichts von dediziertem RAM der GPU, aber manche Online-Shops schreiben 512 MB eigener Grafikspeicher. Kann ich das irgendwie herausbekommen?
Arbeitspeicher habe ich ein Modul mit 2048 MB installiert, also kein Dual Channel.

Danke schon mal. Ich werde doch mal die Logfiles zusammensuchen.

EDIT: Hier der Syslog während auf einen 1080i Sender mit HQ und Temporal geschaltet wurde. Am Anfang stehen noch ein paar Meldungen vom Hochfahren des Systems drin (NVIDIA module laden, etc).

EDIT: log gekürzt

avanix · 19. Oktober 2014

Hier noch ein Installationsdaten des Systems:
EDIT: gelöscht, da wieder yavdr installiert.

johns · 20. Oktober 2014

Mit der Hardware sollte es gehen. Im Log finde ich nichts von VDPAU.

Es kann sein, daß er Softwaredekoder benutzt.

Code

vdr: video/vdpau: VDPAU API version: 1
vdr: video/vdpau: VDPAU information: NVIDIA VDPAU Driver Shared Library  340.32  Tue Aug  5 20:35:32 PDT 2014
vdr: video/vdpau: highest supported high quality scaling 1
vdr: video/vdpau: feature deinterlace temporal supported
vdr: video/vdpau: feature deinterlace temporal spatial supported
vdr: video/vdpau: attribute skip chroma deinterlace supported
vdr: video/vdpau: 4:2:0 chroma format with 4096x4096 supported
vdr: video/vdpau: 4:2:2 chroma format with 4096x4096 supported
vdr: video/vdpau: 8bit BGRA format with 8192x8192 supported
vdr: video/vdpau: 10bit RGBA format with 8192x8192 supported
vdr: [softhddev] ready

Alles anzeigen

fehlt. Suche mal im Log den Teil vor dem "ready", bzw. was da kommt.

Johns

avanix · 20. Oktober 2014

Ok, ich habe jetzt wieder yavdr installiert, da kenne ich mich doch besser aus.

Ich finde im syslog tatsächlich keine entsprechenden Meldungen:

Code

vdr: video/vdpau: VDPAU API version: 1
vdr: video/vdpau: VDPAU information: NVIDIA VDPAU Driver Shared Library  340.32  Tue Aug  5 20:35:32 PDT 2014
vdr: video/vdpau: highest supported high quality scaling 1
vdr: video/vdpau: feature deinterlace temporal supported
vdr: video/vdpau: feature deinterlace temporal spatial supported
vdr: video/vdpau: attribute skip chroma deinterlace supported
vdr: video/vdpau: 4:2:0 chroma format with 4096x4096 supported
vdr: video/vdpau: 4:2:2 chroma format with 4096x4096 supported
vdr: video/vdpau: 8bit BGRA format with 8192x8192 supported
vdr: video/vdpau: 10bit RGBA format with 8192x8192 supported
vdr: [softhddev] ready

Alles anzeigen

(bei yavdr wäre es wahrscheinlich nvidia 331)

Wie kann ich weiter checken, ob VDPAU verwendet wird? Ich finde einfach den Fehler nicht.

mini73 · 20. Oktober 2014

Xorg.log könnte ein Ansatz sein.
Was für Module sind geladen, welcher Kernel, "dkms status"?

Lars

avanix · 20. Oktober 2014

DKMS status

Code

zbox:~$ dkms status
nvidia-331, 331.20, 3.8.0-44-generic, x86_64: installed

Wegen dem Scrollrad an der X10 Fernbedienung habe ich diesen Kernel installiert:

Code

zbox:~$ uname -r
3.8.0-44-generic

geladene Module:

Spoiler anzeigen

Code

zbox:~$ sudo lsmod
Module                  Size  Used by
nfsv3                  39946  1
nfsv4                 268599  0
coretemp               13596  0
gpio_ich               13526  0
snd_hda_codec_hdmi     37463  1
arc4                   12573  2
microcode              23075  0
iwldvm                249122  0
snd_hda_codec_realtek    84288  1
mac80211              631503  1 iwldvm
snd_hda_intel          44339  5
snd_hda_codec         141761  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
iwlwifi               187941  1 iwldvm
snd_pcm               102477  5 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
rts5139               351018  0
snd_seq_midi           13324  0
psmouse               102684  0
snd_rawmidi            30417  1 snd_seq_midi
serio_raw              13215  0
rc_medion_x10_digitainer    12544  0
ati_remote             18614  0
rc_core                26422  3 rc_medion_x10_digitainer,ati_remote
snd_seq_midi_event     14899  1 snd_seq_midi
lpc_ich                17144  0
cfg80211              526422  3 iwldvm,mac80211,iwlwifi
snd_seq                61930  2 snd_seq_midi,snd_seq_midi_event
snd_timer              29989  4 snd_pcm,snd_seq
snd_seq_device         14497  3 snd_seq_midi,snd_rawmidi,snd_seq
mac_hid                13253  0
snd                    69533  16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
btusb                  22431  0
i915                  625836  0
drm_kms_helper         49597  1 i915
i2c_algo_bit           13564  1 i915
bluetooth             247324  2 btusb
soundcore              12680  1 snd
video                  19652  1 i915
snd_page_alloc         18798  2 snd_hda_intel,snd_pcm
nfsd                  287110  13
nfs_acl                12883  2 nfsv3,nfsd
nvidia              10619255  54
auth_rpcgss            49743  2 nfsv4,nfsd
nfs                   187999  6 nfsv3,nfsv4
fscache                58350  2 nfsv4,nfs
lockd                  95054  3 nfsv3,nfsd,nfs
drm                   287796  4 i915,drm_kms_helper,nvidia
sunrpc                278280  76 nfsv3,nfsv4,nfsd,nfs_acl,auth_rpcgss,nfs,lockd
lp                     17799  0
parport                46562  1 lp
ahci                   25879  2
libahci                31636  1 ahci
r8169                  68904  0
vesafb                 13876  1

Alles anzeigen

Ok, hier das Xorg.1.log:

Spoiler anzeigen

Code

[     4.570]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[     4.570] X Protocol Version 11, Revision 0
[     4.570] Build Operating System: Linux 2.6.42-37-generic x86_64 Ubuntu
[     4.570] Current Operating System: Linux zbox 3.8.0-44-generic #66~precise1-Ubuntu SMP Tue Jul 15 04:01:04 UTC 2014 x86_64
[     4.570] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-44-generic root=UUID=f0dd63a7-b2c6-4e0a-a0a3-1c28781b126d ro vmalloc=256m q$
[     4.570] Build Date: 16 October 2013  04:41:23PM
[     4.570] xorg-server 2:1.11.4-0ubuntu10.14 (For technical support please see http://www.ubuntu.com/support)
[     4.571] Current version of pixman: 0.30.2
[     4.571]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[     4.571] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.571] (==) Log file: "/var/log/Xorg.1.log", Time: Mon Oct 20 23:05:25 2014
[     4.577] (==) Using config file: "/etc/X11/xorg.conf.yavdr"
[     4.577] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.583] (==) ServerLayout "Layout0"
[     4.583] (**) |-->Screen "Screen0" (0)
[     4.583] (**) |   |-->Monitor "Monitor0"
[     4.584] (**) |   |-->Device "Device0"
[     4.584] (**) |-->Input Device "Keyboard0"
[     4.584] (**) |-->Input Device "Mouse0"
[     4.585] (==) Automatically adding devices
[     4.585] (==) Automatically enabling devices
[     4.591] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     4.591]    Entry deleted from font path.
[     4.592] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     4.592]    Entry deleted from font path.
[     4.592] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     4.592]    Entry deleted from font path.
[     4.592] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[     4.592]    Entry deleted from font path.
[     4.592] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     4.592]    Entry deleted from font path.
[     4.592] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     4.592]    Entry deleted from font path.
[     4.592] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[     4.592]    Entry deleted from font path.
[     4.592] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        built-ins
[     4.592] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     4.592] (**) Extension "Composite" is disabled
[     4.592] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     4.592] (WW) Disabling Keyboard0
[     4.592] (WW) Disabling Mouse0
[     4.592] (II) Loader magic: 0x7f18017cfb00
[     4.592] (II) Module ABI versions:
[     4.592]    X.Org ANSI C Emulation: 0.4
[     4.592]    X.Org Video Driver: 11.0
[     4.592]    X.Org XInput driver : 16.0
[     4.592]    X.Org Server Extension : 6.0
[     4.595] (--) PCI:*(0:2:0:0) 10de:104a:19da:2070 rev 161, Mem @ 0xda000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x$
[     4.596] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     4.596] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     4.596] (II) "extmod" will be loaded by default.
[     4.596] (II) "dbe" will be loaded by default.
[     4.596] (II) "glx" will be loaded by default.
[     4.596] (II) "record" will be loaded by default.
[     4.596] (II) "dri" will be loaded by default.
[     4.596] (II) "dri2" will be loaded by default.
[     4.596] (II) LoadModule: "extmod"
[     4.603] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[     4.606] (II) Module extmod: vendor="X.Org Foundation"
[     4.606]    compiled for 1.11.3, module version = 1.0.0
[     4.606]    Module class: X.Org Server Extension
[     4.606]    ABI class: X.Org Server Extension, version 6.0
[     4.606] (II) Loading extension MIT-SCREEN-SAVER
[     4.606] (II) Loading extension XFree86-VidModeExtension
[     4.606] (II) Loading extension XFree86-DGA
[     4.606] (II) Loading extension DPMS
[     4.606] (II) Loading extension XVideo
[     4.606] (II) Loading extension XVideo-MotionCompensation
[     4.606] (II) Loading extension X-Resource
[     4.606] (II) LoadModule: "dbe"
[     4.609] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[     4.610] (II) Module dbe: vendor="X.Org Foundation"
[     4.610]    compiled for 1.11.3, module version = 1.0.0
[     4.610]    Module class: X.Org Server Extension
[     4.610]    ABI class: X.Org Server Extension, version 6.0
[     4.610] (II) Loading extension DOUBLE-BUFFER
[     4.610] (II) LoadModule: "glx"
[     4.610] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     4.762] (II) Module glx: vendor="NVIDIA Corporation"
[     4.762]    compiled for 4.0.2, module version = 1.0.0
[     4.762]    Module class: X.Org Server Extension
[     4.763] (II) NVIDIA GLX Module  331.20  Wed Oct 30 17:36:48 PDT 2013
[     4.764] (II) Loading extension GLX
[     4.764] (II) LoadModule: "record"
[     4.765] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[     4.767] (II) Module record: vendor="X.Org Foundation"
[     4.767]    compiled for 1.11.3, module version = 1.13.0
[     4.767]    Module class: X.Org Server Extension
[     4.767]    ABI class: X.Org Server Extension, version 6.0
[     4.767] (II) Loading extension RECORD
[     4.767] (II) LoadModule: "dri"
[     4.768] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[     4.770] (II) Module dri: vendor="X.Org Foundation"
[     4.770]    compiled for 1.11.3, module version = 1.0.0
[     4.770]    ABI class: X.Org Server Extension, version 6.0
[     4.770] (II) Loading extension XFree86-DRI
[     4.770] (II) LoadModule: "dri2"
[     4.771] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[     4.772] (II) Module dri2: vendor="X.Org Foundation"
[     4.772]    compiled for 1.11.3, module version = 1.2.0
[     4.772]    ABI class: X.Org Server Extension, version 6.0
[     4.772] (II) Loading extension DRI2
[     4.772] (II) LoadModule: "nvidia"
[     4.772] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     4.786] (II) Module nvidia: vendor="NVIDIA Corporation"
[     4.786]    compiled for 4.0.2, module version = 1.0.0
[     4.786]    Module class: X.Org Video Driver
[     4.788] (II) NVIDIA dlloader X Driver  331.20  Wed Oct 30 17:16:53 PDT 2013
[     4.788] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     4.789] (++) using VT number 7


[     4.811] (II) Loading sub module "fb"
[     4.811] (II) LoadModule: "fb"
[     4.816] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.818] (II) Module fb: vendor="X.Org Foundation"
[     4.818]    compiled for 1.11.3, module version = 1.0.0
[     4.818]    ABI class: X.Org ANSI C Emulation, version 0.4
[     4.818] (II) Loading sub module "wfb"
[     4.818] (II) LoadModule: "wfb"
[     4.819] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     4.821] (II) Module wfb: vendor="X.Org Foundation"
[     4.821]    compiled for 1.11.3, module version = 1.0.0
[     4.821]    ABI class: X.Org ANSI C Emulation, version 0.4
[     4.821] (II) Loading sub module "ramdac"
[     4.821] (II) LoadModule: "ramdac"
[     4.821] (II) Module "ramdac" already built-in
[     4.825] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     4.826] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     4.826] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.826] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     4.826] (==) NVIDIA(0): RGB weight 888
[     4.826] (==) NVIDIA(0): Default visual is TrueColor
[     4.826] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.827] (**) NVIDIA(0): Option "NoLogo" "True"
[     4.827] (**) NVIDIA(0): Option "ExactModeTimingsDVI" "True"
[     4.827] (**) NVIDIA(0): Option "DPI" "100x100"
[     4.827] (**) NVIDIA(0): Option "TripleBuffer" "False"
[     4.827] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
[     4.827] (**) NVIDIA(0): Option "FlatPanelProperties" "Scaling = Native"
[     4.828] (WW) NVIDIA(0): Unrecognized FlatPanelProperties property "Scaling";
[     4.828] (WW) NVIDIA(0):     ignoring.
[     4.828] (**) NVIDIA(0): Option "UseEvents" "True"
[     4.828] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-1"
[     4.828] (**) NVIDIA(0): Option "CustomEDID" "DFP-1:/etc/X11/edid.0.yavdr"
[     4.828] (**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "on"
[     4.828] (**) NVIDIA(0): Option "MetaModes" "DFP-1: 1920x1080_50 { ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0 }"
[     4.828] (**) NVIDIA(0): Option "UseDisplayDevice" "DFP-1"
[     4.828] (**) NVIDIA(0): Enabling 2D acceleration
[     4.828] (**) NVIDIA(0): ConnectedMonitor string: "DFP-1"
[     6.327] (**) NVIDIA(0): Using ConnectedMonitor string "DFP-1".
[     6.328] drmOpenDevice: node name is /dev/dri/card0
[     6.328] drmOpenDevice: open result is 16, (OK)
[     6.328] drmOpenByBusid: Searching for BusID PCI:2:0:0
[     6.328] drmOpenDevice: node name is /dev/dri/card0
[     6.329] drmOpenDevice: open result is 16, (OK)
[     6.329] drmOpenByBusid: drmOpenMinor returns 16
[     6.329] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[     6.329] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[     6.332] (II) NVIDIA(0): NVIDIA GPU GeForce GT 610 (GF119) at PCI:2:0:0 (GPU-0)
[     6.332] (--) NVIDIA(0): Memory: 524288 kBytes
[     6.332] (--) NVIDIA(0): VideoBIOS: 75.19.1b.00.1b
[     6.332] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     6.335] (--) NVIDIA(0): Valid display device(s) on GeForce GT 610 at PCI:2:0:0
[     6.335] (--) NVIDIA(0):     CRT-0
[     6.335] (--) NVIDIA(0):     DFP-0
[     6.335] (--) NVIDIA(0):     Philips FTV (DFP-1) (boot, connected)
[     6.336] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[     6.336] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[     6.336] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[     6.336] (--) NVIDIA(0): Philips FTV (DFP-1): Internal Single Link TMDS
[     6.336] (--) NVIDIA(0): Philips FTV (DFP-1): 165.0 MHz maximum pixel clock
[     6.336] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     6.336] (**) NVIDIA(0):     device Philips FTV (DFP-1) (Using EDID frequencies has
[     6.336] (**) NVIDIA(0):     been enabled on all display devices.)
[     6.336] (WW) NVIDIA(GPU-0): The EDID for Philips FTV (DFP-1) contradicts itself: mode
[     6.337] (WW) NVIDIA(GPU-0):     "1920x1080" is specified in the EDID; however, the EDID's
[     6.337] (WW) NVIDIA(GPU-0):     valid VertRefresh range (48.000-62.000 Hz) would exclude
[     6.337] (WW) NVIDIA(GPU-0):     this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
[     6.337] (WW) NVIDIA(GPU-0):     check for mode "1920x1080".
[     6.338] (WW) NVIDIA(GPU-0): The EDID for Philips FTV (DFP-1) contradicts itself: mode
[     6.338] (WW) NVIDIA(GPU-0):     "1920x1080" is specified in the EDID; however, the EDID's
[     6.338] (WW) NVIDIA(GPU-0):     valid VertRefresh range (48.000-62.000 Hz) would exclude
[     6.338] (WW) NVIDIA(GPU-0):     this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
[     6.338] (WW) NVIDIA(GPU-0):     check for mode "1920x1080".
[     6.338] (WW) NVIDIA(GPU-0): The EDID for Philips FTV (DFP-1) contradicts itself: mode
[     6.338] (WW) NVIDIA(GPU-0):     "1920x1080" is specified in the EDID; however, the EDID's
[     6.338] (WW) NVIDIA(GPU-0):     valid VertRefresh range (48.000-62.000 Hz) would exclude
[     6.338] (WW) NVIDIA(GPU-0):     this mode's VertRefresh (30.0 Hz); ignoring VertRefresh
[     6.338] (WW) NVIDIA(GPU-0):     check for mode "1920x1080".
[     6.339] (WW) NVIDIA(GPU-0): The EDID for Philips FTV (DFP-1) contradicts itself: mode
[     6.339] (WW) NVIDIA(GPU-0):     "1920x1080" is specified in the EDID; however, the EDID's
[     6.339] (WW) NVIDIA(GPU-0):     valid VertRefresh range (48.000-62.000 Hz) would exclude
[     6.339] (WW) NVIDIA(GPU-0):     this mode's VertRefresh (25.0 Hz); ignoring VertRefresh
[     6.339] (WW) NVIDIA(GPU-0):     check for mode "1920x1080".
[     6.342] (WW) NVIDIA(GPU-0): The EDID for Philips FTV (DFP-1) contradicts itself: mode
[     6.342] (WW) NVIDIA(GPU-0):     "1600x1200" is specified in the EDID; however, the EDID's
[     6.342] (WW) NVIDIA(GPU-0):     valid HorizSync range (15.000-70.000 kHz) would exclude
[     6.342] (WW) NVIDIA(GPU-0):     this mode's HorizSync (75.0 kHz); ignoring HorizSync check
[     6.342] (WW) NVIDIA(GPU-0):     for mode "1600x1200".
[     6.355] (II) NVIDIA(0): Validated MetaModes:
[     6.355] (II) NVIDIA(0):
[     6.355] (II) NVIDIA(0):     "DFP-1:1920x1080_50{ViewPortIn=1920x1080,ViewPortOut=1920x1080+0+0}"
[     6.355] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[     6.389] (**) NVIDIA(0): DPI set to (100, 100); computed from "DPI" X config option
[     6.389] (WW) NVIDIA(0): 32-bit ARGB GLX visuals require the Composite extension.
[     6.389] (WW) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
[     6.389] (--) Depth 24 pixmap format is 32 bpp
[     6.389] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[     6.389] (II) NVIDIA:     access.
[     6.395] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     6.395] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     6.395] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     6.395] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     6.395] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     6.395] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     6.395] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     6.395] (II) NVIDIA(0):     Config Options in the README.
[     6.398] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_50{ViewPortIn=1920x1080,ViewPortOut=1920x1080+0+0}"
[     6.454] (II) Loading extension NV-GLX
[     6.481] (==) NVIDIA(0): Disabling shared memory pixmaps
[     6.481] (==) NVIDIA(0): Backing store disabled
[     6.481] (==) NVIDIA(0): Silken mouse enabled
[     6.481] (**) NVIDIA(0): DPMS enabled
[     6.482] (II) Loading extension NV-CONTROL
[     6.482] (II) Loading extension XINERAMA
[     6.482] (WW) NVIDIA(0): Option "TwinView" is not used
[     6.482] (WW) NVIDIA(0): Option "DynamicTwinView" is not used
[     6.482] (II) Loading sub module "dri2"
[     6.482] (II) LoadModule: "dri2"
[     6.483] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[     6.483] (II) Module dri2: vendor="X.Org Foundation"
[     6.483]    compiled for 1.11.3, module version = 1.2.0
[     6.483]    ABI class: X.Org Server Extension, version 6.0
[     6.483] (II) NVIDIA(0): [DRI2] Setup complete
[     6.483] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     6.483] (--) RandR disabled
[     6.483] (II) Initializing built-in extension Generic Event Extension
[     6.484] (II) Initializing built-in extension SHAPE
[     6.484] (II) Initializing built-in extension MIT-SHM
[     6.484] (II) Initializing built-in extension XInputExtension
[     6.484] (II) Initializing built-in extension XTEST
[     6.484] (II) Initializing built-in extension BIG-REQUESTS
[     6.484] (II) Initializing built-in extension SYNC
[     6.484] (II) Initializing built-in extension XKEYBOARD
[     6.484] (II) Initializing built-in extension XC-MISC
[     6.484] (II) Initializing built-in extension SECURITY
[     6.484] (II) Initializing built-in extension XINERAMA
[     6.484] (II) Initializing built-in extension XFIXES
[     6.484] (II) Initializing built-in extension RENDER
[     6.484] (II) Initializing built-in extension RANDR
[     6.484] (II) Initializing built-in extension COMPOSITE
[     6.484] (II) Initializing built-in extension DAMAGE
[     6.489] (II) Initializing extension GLX
[     6.563] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[     6.571] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.571] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.571] (II) LoadModule: "evdev"
[     6.572] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.574] (II) Module evdev: vendor="X.Org Foundation"
[     6.574]    compiled for 1.11.3, module version = 2.7.0
[     6.574]    Module class: X.Org XInput Driver
[     6.574]    ABI class: X.Org XInput driver, version 16.0
[     6.574] (II) Using input driver 'evdev' for 'Power Button'
[     6.574] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.574] (**) Power Button: always reports core events
[     6.574] (**) evdev: Power Button: Device: "/dev/input/event2"
[     6.574] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.574] (--) evdev: Power Button: Found keys
[     6.574] (II) evdev: Power Button: Configuring as keyboard
[     6.574] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     6.574] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.575] (**) Option "xkb_rules" "evdev"
[     6.575] (**) Option "xkb_model" "pc105"
[     6.575] (**) Option "xkb_layout" "de"
[     6.575] (**) Option "xkb_variant" "nodeadkeys"
[     6.581] (II) XKB: reuse xkmfile /var/lib/xkb/server-76D2B5A359D34EEB9BFAEB1701EF70014DF39715.xkm
[     6.583] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     6.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.584] (II) Using input driver 'evdev' for 'Power Button'
[     6.584] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.584] (**) Power Button: always reports core events
[     6.584] (**) evdev: Power Button: Device: "/dev/input/event0"
[     6.584] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.584] (--) evdev: Power Button: Found keys
[     6.584] (II) evdev: Power Button: Configuring as keyboard
[     6.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     6.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     6.584] (**) Option "xkb_rules" "evdev"
[     6.584] (**) Option "xkb_model" "pc105"
[     6.584] (**) Option "xkb_layout" "de"
[     6.584] (**) Option "xkb_variant" "nodeadkeys"
[     6.586] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     6.586] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     6.586] (II) Using input driver 'evdev' for 'Sleep Button'
[     6.586] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.586] (**) Sleep Button: always reports core events
[     6.586] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[     6.586] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     6.586] (--) evdev: Sleep Button: Found keys
[     6.586] (II) evdev: Sleep Button: Configuring as keyboard
[     6.586] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     6.586] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     6.586] (**) Option "xkb_rules" "evdev"
[     6.586] (**) Option "xkb_model" "pc105"
[     6.586] (**) Option "xkb_layout" "de"
[     6.586] (**) Option "xkb_variant" "nodeadkeys"
[     6.588] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event5)
[     6.588] (II) No input driver specified, ignoring this device.
[     6.588] (II) This device may have been added with another device file.
[     6.589] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event6)
[     6.589] (II) No input driver specified, ignoring this device.
[     6.589] (II) This device may have been added with another device file.
[     6.589] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event7)
[     6.590] (II) No input driver specified, ignoring this device.
[     6.590] (II) This device may have been added with another device file.
[     6.590] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[     6.590] (II) No input driver specified, ignoring this device.
[     6.590] (II) This device may have been added with another device file.
[     6.591] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[     6.591] (II) No input driver specified, ignoring this device.
[     6.591] (II) This device may have been added with another device file.
[     6.592] (II) config/udev: Adding input device X10 Wireless Technology Inc USB Receiver mouse (/dev/input/event4)
[     6.592] (**) X10 Wireless Technology Inc USB Receiver mouse: Applying InputClass "evdev pointer catchall"
[     6.592] (II) Using input driver 'evdev' for 'X10 Wireless Technology Inc USB Receiver mouse'
[     6.592] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.592] (**) X10 Wireless Technology Inc USB Receiver mouse: always reports core events
[     6.592] (**) evdev: X10 Wireless Technology Inc USB Receiver mouse: Device: "/dev/input/event4"
[     6.592] (--) evdev: X10 Wireless Technology Inc USB Receiver mouse: Vendor 0xbc7 Product 0x6
[     6.592] (--) evdev: X10 Wireless Technology Inc USB Receiver mouse: Found 9 mouse buttons
[     6.592] (--) evdev: X10 Wireless Technology Inc USB Receiver mouse: Found relative axes
[     6.592] (--) evdev: X10 Wireless Technology Inc USB Receiver mouse: Found x and y relative axes
[     6.593] (II) evdev: X10 Wireless Technology Inc USB Receiver mouse: Configuring as mouse
[     6.593] (**) evdev: X10 Wireless Technology Inc USB Receiver mouse: YAxisMapping: buttons 4 and 5
[     6.593] (**) evdev: X10 Wireless Technology Inc USB Receiver mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout$
[     6.593] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4/event4"
[     6.593] (II) XINPUT: Adding extended input device "X10 Wireless Technology Inc USB Receiver mouse" (type: MOUSE, id 9)
[     6.593] (II) evdev: X10 Wireless Technology Inc USB Receiver mouse: initialized for relative axes.
[     6.593] (**) X10 Wireless Technology Inc USB Receiver mouse: (accel) keeping acceleration scheme 1
[     6.594] (**) X10 Wireless Technology Inc USB Receiver mouse: (accel) acceleration profile 0
[     6.594] (**) X10 Wireless Technology Inc USB Receiver mouse: (accel) acceleration factor: 2.000
[     6.594] (**) X10 Wireless Technology Inc USB Receiver mouse: (accel) acceleration threshold: 4
[     6.594] (II) config/udev: Adding input device X10 Wireless Technology Inc USB Receiver mouse (/dev/input/mouse0)
[     6.594] (II) No input driver specified, ignoring this device.
[     6.595] (II) This device may have been added with another device file.
[     6.595] (II) config/udev: Adding input device X10 Wireless Technology Inc USB Receiver (/dev/input/event3)
[     6.595] (**) X10 Wireless Technology Inc USB Receiver: Applying InputClass "evdev keyboard catchall"
[     6.596] (II) Using input driver 'evdev' for 'X10 Wireless Technology Inc USB Receiver'
[     6.596] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.596] (**) X10 Wireless Technology Inc USB Receiver: always reports core events
[     6.596] (**) evdev: X10 Wireless Technology Inc USB Receiver: Device: "/dev/input/event3"
[     6.596] (--) evdev: X10 Wireless Technology Inc USB Receiver: Vendor 0xbc7 Product 0x6
[     6.596] (--) evdev: X10 Wireless Technology Inc USB Receiver: Found keys
[     6.596] (II) evdev: X10 Wireless Technology Inc USB Receiver: Configuring as keyboard
[     6.596] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/rc/rc0/input3/event3"
[     6.596] (II) XINPUT: Adding extended input device "X10 Wireless Technology Inc USB Receiver" (type: KEYBOARD, id 10)
[     6.596] (**) Option "xkb_rules" "evdev"
[     6.596] (**) Option "xkb_model" "pc105"
[     6.596] (**) Option "xkb_layout" "de"
[     6.596] (**) Option "xkb_variant" "nodeadkeys"
[     6.998] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm

Alles anzeigen

Nix · 21. Oktober 2014

Moin,

habe auch eine ID86, auch yaVDR 0.5, auch SoftHDDevice, auch 'nen Philips-TV dahinter. Bei mir fallen keine Aussetzer bei FullHD-Programmen auf. Unterschiede zu Deinem Setup: Ich habe den Standard-Kernel und 60Hz statt 50Hz (Bevor jetzt jemand wettert: Ich mag das 50Hz-Bild nicht, das ist so "flach" und video-mäßig). Wenn ich heute abend zu Hause bin, kann ich auch bei Bedarf weitere Daten vergleichen, musst nur sagen welche...

VG, Nix

avanix · 21. Oktober 2014

Ich habe das Tool qvdpautest installiert (so wie hier beschrieben)

VDPAU scheint also zu laufen, Fehlermeldung kam auch keine.

Kann ich aus diesen Werten etwas ableiten?

Code

qvdpautest 0.5.2
Intel(R) Atom(TM) CPU D2550   @ 1.86GHz
NVIDIA GPU GeForce GT 610 (GF119) at PCI:2:0:0 (GPU-0)


VDPAU API version : 1
VDPAU implementation : NVIDIA VDPAU Driver Shared Library  331.20  Wed Oct 30 17:39:35 PDT 2013


SURFACE GET BITS: 191.91 M/s
SURFACE PUT BITS: 162.689 M/s


MPEG DECODING (1920x1080): 155 frames/s
MPEG DECODING (1280x720): 407 frames/s
H264 DECODING (1920x1080): 129 frames/s
H264 DECODING (1280x720): 210 frames/s
VC1 DECODING (1440x1080): 83 frames/s
MPEG4 DECODING (1920x1080): 130 frames/s


MIXER WEAVE (1920x1080): 338 frames/s
MIXER BOB (1920x1080): 263 fields/s
MIXER TEMPORAL (1920x1080): 70 fields/s
MIXER TEMPORAL + IVTC (1920x1080): 46 fields/s
MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 88 fields/s
MIXER TEMPORAL_SPATIAL (1920x1080): 21 fields/s
MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 17 fields/s
MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 24 fields/s
MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 64 fields/s
MIXER TEMPORAL_SPATIAL + HQSCALING (720x576 video to 1920x1080 display): 15 fields/s


MULTITHREADED MPEG DECODING (1920x1080): 183 frames/s
MULTITHREADED MIXER TEMPORAL (1920x1080): 49 fields/s

Alles anzeigen

Nix · 21. Oktober 2014

Moin,

habe das soeben auch bei mir mal laufen lassen. Die mixer-Werte sind schon ziemlich unterschiedlich im Vergleich zu Deinen...

Code

[100%] Built target qvdpautest
qvdpautest 0.5.2
Intel(R) Atom(TM) CPU D2550   @ 1.86GHz
NVIDIA GPU GeForce GT 610 (GF119) at PCI:2:0:0 (GPU-0)


VDPAU API version : 1
VDPAU implementation : NVIDIA VDPAU Driver Shared Library  304.116  Mon Oct 28 2                            
1:01:40 PDT 2013


SURFACE GET BITS: 187.134 M/s
SURFACE PUT BITS: 162.656 M/s


MPEG DECODING (1920x1080): 157 frames/s
MPEG DECODING (1280x720): 406 frames/s
H264 DECODING (1920x1080): 129 frames/s
H264 DECODING (1280x720): 212 frames/s
VC1 DECODING (1440x1080): 83 frames/s
MPEG4 DECODING (1920x1080): 130 frames/s


MIXER WEAVE (1920x1080): 581 frames/s
MIXER BOB (1920x1080): 900 fields/s
MIXER TEMPORAL (1920x1080): 263 fields/s
MIXER TEMPORAL + IVTC (1920x1080): 166 fields/s
MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 344 fields/s
MIXER TEMPORAL_SPATIAL (1920x1080): 110 fields/s
MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 87 fields/s
MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 123 fields/s
MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 374 fields/s
MIXER TEMPORAL_SPATIAL + HQSCALING (720x576 video to 1920x1080 display): 224 fields/s


MULTITHREADED MPEG DECODING (1920x1080): 177 frames/s
MULTITHREADED MIXER TEMPORAL (1920x1080): 207 fields/s

Alles anzeigen

VG, Nix

avanix · 21. Oktober 2014

Nix
Vielen Dank für den Test.

Hast du in deiner zbox ID86 ein oder zwei Speichermodule installiert?

Ich bin mir nicht mehr sicher, ob die Box eigenen Grafikspeicher verbaut hat. Ich habe nur ein RAM-Speichermodul installiert, evtl ist VDPAU wegen dem fehlenden DualChannel beim Speicher so langsam.

Code

zbox:~$ sudo lshw -C memory
 *-memory
       description: System Memory
       physical id: 28
       slot: System board or motherboard
       size: 2GiB
     *-bank:0
          description: SODIMM [empty]
          product: [Empty]
          vendor: [Empty]
          physical id: 0
          serial: [Empty]
          slot: DIMM0
     *-bank:1
          description: SODIMM DDR3 Synchronous 1066 MHz (0,9 ns)
          product: CM3X2GSD1066
          vendor: NXP (Philips Semi, Signetics)
          physical id: 1
          serial: 00000000
          slot: DIMM1
          size: 2GiB
          width: 64 bits
          clock: 1066MHz (0.9ns)

Alles anzeigen

Nix · 21. Oktober 2014

Habe auch nur eine Bank bestückt, aber mit 4GB:

Code

*-memory
       description: System Memory
       physical id: 28
       slot: System board or motherboard
       size: 4GiB
     *-bank:0
          description: SODIMM [empty]
          product: [Empty]
          vendor: [Empty]
          physical id: 0
          serial: [Empty]
          slot: DIMM0
     *-bank:1
          description: SODIMM DDR3 Synchronous 1066 MHz (0,9 ns)
          product: CMSO4GX3M1C1600C
          vendor: NXP (Philips Semi, Signetics)
          physical id: 1
          serial: 00000000
          slot: DIMM1
          size: 4GiB
          width: 64 bits
          clock: 1066MHz (0.9ns)

Alles anzeigen

VG, Nix

avanix · 21. Oktober 2014

Nix
Du hast ja noch die etwas ältere Nvidia Version 304.116 installiert.
Hast du irgendwelche updates gemacht oder verwendest du yavdr 0.5 wie es von der Installations ISO kommt?

Ich habe am yavdr System nichts groß geändert außer:
1) apt-get dist-upgrade, um alles auf den neuesten Stand zu bekommen und
2) dem neuen Kernel 3.8 sowie
3) den aktuelleren Nvidia 331 Treiber.

Dann kann es eigentlich nur an einem dieser Punkte liegen.

Nix · 21. Oktober 2014

Genau wie Du schreibst: Ich habe nur apt-get dist-upgrade gemacht, sonst keine weiteren Updates für Kernel (3.2.0-70-generic) oder Grafiktreiber...

VG, Nix

avanix · 21. Oktober 2014

Ich habe yavdr nochmal ganz frisch aufgesetzt und nur ein apt-get update und apt-get dist-upgrade gemacht. Also Kernel 3.2.0-70-generic und nvidia 304.116.
Das hat wieder nichts gebracht, die qvdpautest Werte sind immer noch schlecht.

Ich weiß echt nicht mehr weiter. Hat jemand einen Tipp für mich?

Code

qvdpautest 0.5.2
Intel(R) Atom(TM) CPU D2550   @ 1.86GHz
NVIDIA GPU GeForce GT 610 (GF119) at PCI:2:0:0 (GPU-0)


VDPAU API version : 1
VDPAU implementation : NVIDIA VDPAU Driver Shared Library  304.116  Mon Oct 28 21:01:40 PDT 2013


SURFACE GET BITS: 191.757 M/s
SURFACE PUT BITS: 162.689 M/s


MPEG DECODING (1920x1080): 157 frames/s
MPEG DECODING (1280x720): 406 frames/s
H264 DECODING (1920x1080): 129 frames/s
H264 DECODING (1280x720): 214 frames/s
VC1 DECODING (1440x1080): 83 frames/s
MPEG4 DECODING (1920x1080): 130 frames/s


MIXER WEAVE (1920x1080): 361 frames/s
MIXER BOB (1920x1080): 287 fields/s
MIXER TEMPORAL (1920x1080): 77 fields/s
MIXER TEMPORAL + IVTC (1920x1080): 51 fields/s
MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 88 fields/s
MIXER TEMPORAL_SPATIAL (1920x1080): 23 fields/s
MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 18 fields/s
MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 25 fields/s
MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 75 fields/s
MIXER TEMPORAL_SPATIAL + HQSCALING (720x576 video to 1920x1080 display): 28 fields/s


MULTITHREADED MPEG DECODING (1920x1080): 183 frames/s
MULTITHREADED MIXER TEMPORAL (1920x1080): 51 fields/s

Alles anzeigen

_Martin_ · 22. Oktober 2014

Wenn du noch irgendwo einen passenden Ram-Riegel rumliegen hast, würde ich noch mal dualchannel versuchen, das soll auf jeden fall was bringen.
Hast du mal im Bios geschaut ob du deiner Grafikkarte ram zuweisen kannst oder ob da noch andere Einstellungen bzgl. Grafikkarte gesetzt werden könnnen?

Grüße
Martin

avanix · 22. Oktober 2014

Habe leider keinen passenden RAM-Riegel (die Box verwendet Notebookspeicher).
Im BIOS kann ich bezüglich Grafikspeicher nichts einstellen. Lt. diverser Datenblätter bei Händlern hat die Box 512MB Grafikspeicher. Im Handbuch steht aber nichts dazu, ob dieser vom Hauptspeicher abgezweigt wird. Ich werde wohl nochmal Geld investieren und einen zweiten Riegel kaufen. Momentan fällt mir keine andere Lösung ein.

johns · 23. Oktober 2014

Ich weiß nicht ob "nvidia-smi -q" unterschiede ausspuckt für shared RAM.
Einfach mal ausprobieren.

Ansonsten kannst erstmal auf "temporal" mit Skip Chroma stellen, dafür sollte die Leistung reichen.

Johns

seahawk1986 · 23. Oktober 2014

Zitat von johns

Ich weiß nicht ob "nvidia-smi -q" unterschiede ausspuckt für shared RAM.

G210 mit eigenem VRAM

Code

nvidia-smi -q


==============NVSMI LOG==============


Timestamp                       : Thu Oct 23 12:06:07 2014
Driver Version                  : 304.123


Attached GPUs                   : 1
GPU 0000:01:00.0
    Product Name                : GeForce 210
    Display Mode                : N/A
    Persistence Mode            : Disabled
    Driver Model
        Current                 : N/A
        Pending                 : N/A
    Serial Number               : N/A
    GPU UUID                    : GPU-cecbd2d3-8f40-f917-d819-9c91ac29a840
    VBIOS Version               : 70.18.2D.00.04
    Inforom Version
        Image Version           : N/A
        OEM Object              : N/A
        ECC Object              : N/A
        Power Management Object : N/A
    GPU Operation Mode
        Current                 : N/A
        Pending                 : N/A
    PCI
        Bus                     : 0x01
        Device                  : 0x00
        Domain                  : 0x0000
        Device Id               : 0x0A6510DE
        Bus Id                  : 0000:01:00.0
        Sub System Id           : 0x079410DE
        GPU Link Info
            PCIe Generation
                Max             : N/A
                Current         : N/A
            Link Width
                Max             : N/A
                Current         : N/A
    Fan Speed                   : N/A
    Performance State           : N/A
    Clocks Throttle Reasons     : N/A
    Memory Usage
        Total                   : 511 MB
        Used                    : 68 MB
        Free                    : 443 MB
    Compute Mode                : Default
    Utilization
        Gpu                     : N/A
        Memory                  : N/A
    Ecc Mode
        Current                 : N/A
        Pending                 : N/A
    ECC Errors
        Volatile
            Single Bit
                Device Memory   : N/A
                Register File   : N/A
                L1 Cache        : N/A
                L2 Cache        : N/A
                Texture Memory  : N/A
                Total           : N/A
            Double Bit
                Device Memory   : N/A
                Register File   : N/A
                L1 Cache        : N/A
                L2 Cache        : N/A
                Texture Memory  : N/A
                Total           : N/A
        Aggregate
            Single Bit
                Device Memory   : N/A
                Register File   : N/A
                L1 Cache        : N/A
                L2 Cache        : N/A
                Texture Memory  : N/A
                Total           : N/A
            Double Bit
                Device Memory   : N/A
                Register File   : N/A
                L1 Cache        : N/A
                L2 Cache        : N/A
                Texture Memory  : N/A
                Total           : N/A
    Temperature
        Gpu                     : 62 C
    Power Readings
        Power Management        : N/A
        Power Draw              : N/A
        Power Limit             : N/A
        Default Power Limit     : N/A
        Min Power Limit         : N/A
        Max Power Limit         : N/A
    Clocks
        Graphics                : N/A
        SM                      : N/A
        Memory                  : N/A
    Applications Clocks
        Graphics                : N/A
        Memory                  : N/A
    Max Clocks
        Graphics                : N/A
        SM                      : N/A
        Memory                  : N/A
    Compute Processes           : N/A

Alles anzeigen

ION1 mit shared RAM

Code

==============NVSMI LOG==============


Timestamp                           : Thu Oct 23 12:06:41 2014
Driver Version                      : 331.38


Attached GPUs                       : 1
GPU 0000:03:00.0
    Product Name                    : ION
    Display Mode                    : N/A
    Display Active                  : N/A
    Persistence Mode                : Disabled
    Accounting Mode                 : N/A
    Accounting Mode Buffer Size     : N/A
    Driver Model
        Current                     : N/A
        Pending                     : N/A
    Serial Number                   : N/A
    GPU UUID                        : GPU-0965c81a-0da9-ee47-1768-5a53f7b5f476
    Minor Number                    : 0
    VBIOS Version                   : 62.79.67.00.00
    Inforom Version
        Image Version               : N/A
        OEM Object                  : N/A
        ECC Object                  : N/A
        Power Management Object     : N/A
    GPU Operation Mode
        Current                     : N/A
        Pending                     : N/A
    PCI
        Bus                         : 0x03
        Device                      : 0x00
        Domain                      : 0x0000
        Device Id                   : 0x087D10DE
        Bus Id                      : 0000:03:00.0
        Sub System Id               : 0xCB7910DE
        GPU Link Info
            PCIe Generation
                Max                 : N/A
                Current             : N/A
            Link Width
                Max                 : N/A
                Current             : N/A
        Bridge Chip
            Type                    : N/A
            Firmware                : N/A
    Fan Speed                       : N/A
    Performance State               : N/A
    Clocks Throttle Reasons         : N/A
    FB Memory Usage
        Total                       : 509 MiB
        Used                        : 9 MiB
        Free                        : 500 MiB
    BAR1 Memory Usage
        Total                       : N/A
        Used                        : N/A
        Free                        : N/A
    Compute Mode                    : Default
    Utilization
        Gpu                         : N/A
        Memory                      : N/A
    Ecc Mode
        Current                     : N/A
        Pending                     : N/A
    ECC Errors
        Volatile
            Single Bit
                Device Memory       : N/A
                Register File       : N/A
                L1 Cache            : N/A
                L2 Cache            : N/A
                Texture Memory      : N/A
                Total               : N/A
            Double Bit
                Device Memory       : N/A
                Register File       : N/A
                L1 Cache            : N/A
                L2 Cache            : N/A
                Texture Memory      : N/A
                Total               : N/A
        Aggregate
            Single Bit
                Device Memory       : N/A
                Register File       : N/A
                L1 Cache            : N/A
                L2 Cache            : N/A
                Texture Memory      : N/A
                Total               : N/A
            Double Bit
                Device Memory       : N/A
                Register File       : N/A
                L1 Cache            : N/A
                L2 Cache            : N/A
                Texture Memory      : N/A
                Total               : N/A
    Retired Pages
        Single Bit ECC              : N/A
        Double Bit ECC              : N/A
        Pending                     : N/A
    Temperature
        Gpu                         : 41 C
    Power Readings
        Power Management            : N/A
        Power Draw                  : N/A
        Power Limit                 : N/A
        Default Power Limit         : N/A
        Enforced Power Limit        : N/A
        Min Power Limit             : N/A
        Max Power Limit             : N/A
    Clocks
        Graphics                    : N/A
        SM                          : N/A
        Memory                      : N/A
    Applications Clocks
        Graphics                    : N/A
        Memory                      : N/A
    Default Applications Clocks
        Graphics                    : N/A
        Memory                      : N/A
    Max Clocks
        Graphics                    : N/A
        SM                          : N/A
        Memory                      : N/A
    Compute Processes               : N/A

Alles anzeigen

Sieht nach "Memory Usage" bei eigenem VRAM und nach "FB Memory Usage" bei Shared RAM aus.

softhddevice auf zbox ID86

Jetzt mitmachen!

Teilen