Newbie bekommt SkyStar2 nicht zum laufen

Beginner

Wednesday, February 15th 2006, 5:31pm

Tach auch, ich bräuchte mal Eure Hilfe.
Ich wollte eine TechniSat Skystar 2.6b DVB-S Karte nachträglich in meinen Pundit PC „reindrücken“. Leider wird diese vom System nicht richtig erkannt.
In der Datei runvdr wir das Modul skystar2 geladen. Muss ich die Karte noch am System anmelden ?!?!?!?!. Ich würde es ungern neu installieren.
Danke schon mal jetzt für jede Antwort, bis denne
Gruß Jörg

linvdr:~# logread
Feb 15 17:17:52 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Feb 15 17:17:53 linvdr user.info kernel: b44.c:v0.95 (Aug 3, 2004)
Feb 15 17:17:53 linvdr user.warn kernel: PCI: Enabling device 0000:00:0f.0 (0004 -> 0006)
Feb 15 17:17:53 linvdr user.info kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 185
Feb 15 17:17:53 linvdr user.info kernel: eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:d3:a8:72
Feb 15 17:17:53 linvdr local0.info udhcpc[1129]: udhcpc (v0.9.9-pre) started
Feb 15 17:17:53 linvdr local0.debug udhcpc[1129]: Sending discover...
Feb 15 17:17:53 linvdr user.info kernel: Linux video capture interface: v1.00
Feb 15 17:17:53 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Feb 15 17:17:53 linvdr user.warn kernel: PCI: Enabling device 0000:00:13.0 (0004 -> 0006)
Feb 15 17:17:53 linvdr user.info kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 185
Feb 15 17:17:53 linvdr user.warn kernel: saa7146: found saa7146 @ mem dec8a000 (revision 1, irq 185) (0x13c2,0x000e).
Feb 15 17:17:53 linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
Feb 15 17:17:53 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:05:17:4b
Feb 15 17:17:54 linvdr user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80fd2623
Feb 15 17:17:54 linvdr user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Feb 15 17:17:54 linvdr user.warn kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
Feb 15 17:17:54 linvdr user.warn kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Feb 15 17:17:54 linvdr user.warn kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
Feb 15 17:17:54 linvdr user.info kernel: dvb-ttpci: found av7110-0.
Feb 15 17:17:54 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Feb 15 17:17:54 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Feb 15 17:17:54 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
Feb 15 17:17:54 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Feb 15 17:17:54 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.

LinVDR Mahlzeit 2 Image, P4 2,4GHz, 512MB-RAM, 120GB HDD,NEC DVD-Brenner, TT DVB-S Rev2.3

Go to the top of the page

GMO

Intermediate

Posts: 441

Location: OWL

2

Wednesday, February 15th 2006, 5:48pm

Hm, interessant dürfte es im Log ein wenig später werden. Ob da dann steht : 2 Video devices. Momentan hat er nämlich erst die Nexus komplett erkannt.

Hast du noch nen paar Zeilen für uns?

HDTVDR: Antec Micro Fusion mit Asus M4N78-VM, Sempron 140, 2GB, 1,5TB, TT-1600, yaVDR 0.5 (Stand Januar 2013)

Go to the top of the page

_joerg

Beginner

Posts: 41

3

Wednesday, February 15th 2006, 6:03pm

RE: Newbie bekommt SkyStar2 nicht zum laufen

Hier der Auszug:

Feb 15 17:57:25 linvdr local0.info udhcpc[1122]: Lease of 192.168.178.20 obtained, lease time 864000
Feb 15 17:57:25 linvdr auth.info sshd[1258]: Server listening on 0.0.0.0 port 22.
Feb 15 17:57:25 linvdr daemon.info init: ^MStarting pid 1265, console /dev/tty1: '/sbin/getty'
Feb 15 17:57:25 linvdr daemon.info init: ^MStarting pid 1266, console /dev/tty2: '/sbin/getty'
Feb 15 17:57:25 linvdr daemon.info init: ^MStarting pid 1268, console /dev/tty3: '/sbin/getty'
Feb 15 17:57:25 linvdr daemon.info init: ^MStarting pid 1275, console /dev/tty4: '/sbin/getty'
Feb 15 17:57:25 linvdr user.debug vdr: [1281] tuner on device 1 thread started (pid=1281, tid=1281)
Feb 15 17:57:25 linvdr user.debug vdr: [1284] section handler thread started (pid=1284, tid=1284)
Feb 15 17:57:25 linvdr user.debug vdr: [1245] probing /dev/dvb/adapter1/frontend0
Feb 15 17:57:25 linvdr user.info vdr: [1245] found 1 video device
Feb 15 17:57:25 linvdr user.info vdr: [1245] initializing plugin: burn (0.0.009): Versatile convert-and-burn plugin

LinVDR Mahlzeit 2 Image, P4 2,4GHz, 512MB-RAM, 120GB HDD,NEC DVD-Brenner, TT DVB-S Rev2.3

Go to the top of the page

_joerg

Beginner

Posts: 41

4

Wednesday, February 15th 2006, 6:04pm

Ich habe keine Ahnung wieso er nur einen Adapter findet.

LinVDR Mahlzeit 2 Image, P4 2,4GHz, 512MB-RAM, 120GB HDD,NEC DVD-Brenner, TT DVB-S Rev2.3

Go to the top of the page

TKONeo

Intermediate

Posts: 248

Location: Nürnberg

Occupation: Student

5

Wednesday, February 15th 2006, 6:27pm

Was spricht denn ein lspci -v ?

VDR #1:
SW: LINVDR 0.7 (2.6.20.1 @Dr. Seltsam) VDR 1.4.5-2-extp22 + Mahlzeit-ISO 3.2
HW: Asus Pundit-R - Pentium III 2GHz - 7'' TFT für GraphTFT - Nexus-S Rev. 2.3
VDR #2 (Client):
SW: LinVDR 0.7 (2.6.17.3 @Dr. Seltsam) VDR 1.4.0-1 + DXR3 @Dr. Seltsam
HW: T-Online Streaming Box S-100 - Pentium M 788MHz - DXR3 Karte - 1GB CF
Registered User: #1096

Go to the top of the page

_joerg

Beginner

Posts: 41

6

Wednesday, February 15th 2006, 6:30pm

linvdr:~# lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0651 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8081
Flags: bus master, medium devsel, latency 32
Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df800000-dfffffff
Prefetchable memory behind bridge: e8000000-f3ffffff

00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0962 (rev 14)
Flags: bus master, medium devsel, latency 0

00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
Flags: medium devsel
I/O ports at e600

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 807a
Flags: bus master, medium devsel, latency 128, IRQ 177
I/O ports at a400

00:0e.0 Network controller: Techsan Electronics Co Ltd: Unknown device 2103 (rev 01)
Subsystem: Techsan Electronics Co Ltd: Unknown device 2103
Flags: bus master, slow devsel, latency 32, IRQ 255
Memory at dc800000 (32-bit, non-prefetchable) [disabled] [size=64K]
I/O ports at 8800 [disabled]

00:0f.0 Ethernet controller: BROADCOM Corporation: Unknown device 4401 (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 80a8
Flags: bus master, fast devsel, latency 32, IRQ 185
Memory at dc000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2

00:13.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH: Unknown device 000e
Flags: bus master, medium devsel, latency 32, IRQ 185
Memory at db800000 (32-bit, non-prefetchable) [size=512]

01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]: Unknown device 6325 (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8081
Flags: 66Mhz, medium devsel, IRQ 11
BIST result: 00
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at df800000 (32-bit, non-prefetchable) [size=128K]
I/O ports at d800 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Power Management version 2
Capabilities: [50] AGP version 2.0

LinVDR Mahlzeit 2 Image, P4 2,4GHz, 512MB-RAM, 120GB HDD,NEC DVD-Brenner, TT DVB-S Rev2.3

Go to the top of the page

_joerg

Beginner

Posts: 41

7

Wednesday, February 15th 2006, 6:40pm

Karte im Arsch oder die Maschine doch neu aufsetzen ?!?!?!?!

LinVDR Mahlzeit 2 Image, P4 2,4GHz, 512MB-RAM, 120GB HDD,NEC DVD-Brenner, TT DVB-S Rev2.3

Go to the top of the page

foobar42

Sage

Posts: 3,116

8

Wednesday, February 15th 2006, 6:42pm

RE: Newbie bekommt SkyStar2 nicht zum laufen

Quoted

Original von _joerg
In der Datei runvdr wir das Modul skystar2 geladen.

Nun kömmt's auf den Kernel und die Treiber-Versionen an. Neuere nutzen nicht dieses Modul, sondern brauchen das so:

	Source code
1 2	#skystar2 b2c2-flexcop-pci

LG
fb

VDR 1.4.3-3 (vdr-install-script-0.9.5.8 ), VDRAdmin-AM 3.5.2 unter Debian Sarge auf ASUS A8V Deluxe mit Athlon 3000+ (Venice), TT 1.5 + Skystar2

Go to the top of the page

_joerg

Beginner

Posts: 41

9

Wednesday, February 15th 2006, 6:57pm

Das wars, die Karte "läuft".

Tausend Dank für die schnelle Hilfe.

Bis denne
Gruß Jörg

LinVDR Mahlzeit 2 Image, P4 2,4GHz, 512MB-RAM, 120GB HDD,NEC DVD-Brenner, TT DVB-S Rev2.3

Go to the top of the page

VDR Portal