Hi,
hat jemand eine funktionierende lm_sensors Konfigurationsdatei sensors.conf für ein VIA MII-12000 Board?
Falls ja, kann er diese mir zur Verfüung stellen?
Thanks
John
Hi,
hat jemand eine funktionierende lm_sensors Konfigurationsdatei sensors.conf für ein VIA MII-12000 Board?
Falls ja, kann er diese mir zur Verfüung stellen?
Thanks
John
hallo,
welches modul hat das MII-12000? Ich verwende das MII-10000 und dort ist vt1211 am wirken. Habe dann diese conf am laufen :
------------------------------------
chip "vt1211-*" "vt8231-*"
ignore in6
set config 12
ignore in0
ignore in1
ignore temp1
ignore temp2
ignore temp4
ignore temp5
ignore temp6
ignore temp7
#
label in2 "VCore1"
label in3 "+5V"
label in4 "+12V"
label in5 "+3.3V"
label temp3 "CPU"
label fan1 "System"
label fan2 "CPU"
# VCORE1
compute in2 ((@ * 100) - 3) / (1.0000 * 95.8), (@ * 1.0000 * 0.958) + .03
# +5v
compute in3 ((@ * 100) - 3) / (0.3900 * 95.8), (@ * 0.3900 * 0.958) + .03
# +12v
compute in4 ((@ * 100) - 3) / (0.1700 * 95.8), (@ * 0.1700 * 0.958) + .03
# +3.3v
compute in5 ((@ * 100) - 3) / (0.6296 * 95.8), (@ * 0.6296 * 0.958) + .03
set vrm 9.1
set in2_min 1.35 * 0.95
set in2_max 1.35 * 1.05
set in3_min 5.0 * 0.92
set in3_max 5.0 * 1.05
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.95
set in5_max 3.3 * 1.05
compute temp3 (@ - 65) / 0.9686, (@ * 0.9686) + 65
set temp3_hyst 60
set temp3_over 65
set fan1_div 4
set fan1_min 1500
set fan2_min 3000
--------------------------------------------
gruß lola
PS shit smilies ich hänge sie mal hier an
Hi lola,
habe jetzt deine sensors.conf ausprobiert.
Hier der output:
eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at 0500
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
vt1211-isa-6000
Adapter: ISA adapter
VCore1: +1.37 V (min = +1.30 V, max = +1.39 V)
+5V: +5.01 V (min = +4.60 V, max = +5.11 V)
+12V: +12.53 V (min = +11.11 V, max = +13.57 V)
+3.3V: +3.27 V (min = +4.18 V, max = +4.18 V) ALARM
System: 0 RPM (min = 3006 RPM, div = 2) ALARM
CPU: 0 RPM (min = 3006 RPM, div = 2)
CPU: +37.2°C (high = +95°C, hyst = +90°C)
vid: +1.850 V (VRM Version 9.1)
CPU Fan habe ich nicht, das ist OK.
Wundere mich aber das ich nix vom System Fan bekomme.
Bye
John
hallo John,
Lüfter habe ich keine dran, mein MII 10000 ist passiv gekühlt, hat mich also nicht weiter gewundert. Deswegen kann ich zu den Fan Werten nichts sagen. Ich habe mir sysinfo deswegen entsprechend angepasst. Ansonsten passts doch
Gruß lola
Hi lola,
Vielen Dank für deine Hilfe, werde es auch so übernehmen.
Bye
John
PS: schicker screenshot.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!