[Howto] Ubuntu 9.10 + vdr + xbmc

Intermediate

Location: südlich v. Hamburg, nördlich v. München

Monday, January 4th 2010, 2:30pm

Generell hat xbmc nur dann eine VDR-Anbindung, wenn Du die pvr-testing-Variante bzw. deren Nachfolger installiert hast, und auch da hat nicht jedes Skin ein TV-Modul. Welchen Skin hast Du aktiviert? Soweit ich weiß, geht nur bei pm3-hd und bei Confluence TV, bei letzterem auch nur bei recht aktuellen xbmc-Versionen.

Gruß, Nixl

Produktiv: Thermaltake DF101, Imon VFD. Gigabyte H67-Board, i3-2120, 8GB Ram, GeForce 520, 6 TB Video-Part., Cine S2, yavdr 0.5, Frontend vdr-sxfe
Motto: Ihr seid alt genug, ihr könnt machen was ich will...

This post has been edited 1 times, last edit by "Nix" (Jan 4th 2010, 2:31pm)

Go to the top of the page

walzing

Beginner

Posts: 10

82

Monday, January 4th 2010, 2:49pm

ok - installiert hatte ich danach:
http://xbmc.org/wiki/?title=XBMCbuntu

Dann hatte ich mit MythTV getestet und den ganzen MythTV kram wieder deinstalliert. Danach dann auch noch:

	Source code
1 2 3	sudo apt-get remove xbmc xbmc-live sudo apt-get autoremove sudo apt-get clean

Danach bin ich dann in diese Anleitung eingestiegen und habe XBMC wie folgt installiert:

	Source code
1 2 3	sudo add-apt-repository ppa:the-vdr-team/ppa/ubuntu sudo apt-get update sudo apt-get install vdr-plugin-streamdev-server xbmc xbmc-skin-pm3-hd

Den Skin habe ich wie beschrieen auf pm3-hd gewechselt.

Kann ich irgendwie überprüfen, obs die richtige XBMC Version ist? Nicht das er die aus dem Ubuntu Rep. genommen hat.

cu
Walzing

Go to the top of the page

Nix

Intermediate

Posts: 488

Location: südlich v. Hamburg, nördlich v. München

83

Monday, January 4th 2010, 3:48pm

Schau mal nach, ob unter /usr/share/xbmc/addons der Ordner PVR vorhanden ist. Wenn ja, hast Du eine Variante mit VDR-Unterstützung. Und bei einem Wechsel oder Update der xbmc-Installation kann ein Löschen des Ordners /home/<username>/.xbmc nützlich sein (wenn xbmc nicht läuft).

Ich weiß nicht, wie aktuell xbmc aus dem the-vdr-team-Repo ist, neue xbmc-Versionen bieten auch in Confluence ein TV-Modul an.

Gruß, Nix

Produktiv: Thermaltake DF101, Imon VFD. Gigabyte H67-Board, i3-2120, 8GB Ram, GeForce 520, 6 TB Video-Part., Cine S2, yavdr 0.5, Frontend vdr-sxfe
Motto: Ihr seid alt genug, ihr könnt machen was ich will...

Go to the top of the page

walzing

Beginner

Posts: 10

84

Monday, January 4th 2010, 4:11pm

Habs schon gefunden - alte Quellen aus dem Howto:
http://xbmc.org/wiki/?title=XBMCbuntu

	Source code
1	sudo add-apt-repository ppa:team-xbmc

Das habe ich entfernt und danach hatte ich auch TV. Was mir dann aber gleich aufgefallen ist, ist folgendes:
- Interlaceing Problem (war deutlich zu sehen)
- teilweise ging ein 'Bildversatz' durchs Bild

Aber ich weiss nicht, ob das hier zum Thread gehört.

cu
Walzing

Go to the top of the page

tkaufmann

Trainee

Posts: 152

85

Monday, January 4th 2010, 4:14pm

Compiz / Compositing noch an?

Meine VDRs findest Du auf meiner Profilseite

Go to the top of the page

oldspies2

Professional

Posts: 527

86

Monday, January 4th 2010, 9:44pm

So da bin ich wieder....
Also Karte wird erkannt

Quoted

Jan 4 20:09:24 VDRHD kernel: [ 14.001299] saa7146: register extension 'budget_ci dvb'.
Jan 4 20:09:24 VDRHD kernel: [ 14.001634] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Jan 4 20:09:24 VDRHD kernel: [ 14.001638] budget_ci dvb 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
Jan 4 20:09:24 VDRHD kernel: [ 14.001654] IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs
Jan 4 20:09:24 VDRHD kernel: [ 14.001674] saa7146: found saa7146 @ mem f896c000 (revision 1, irq 16) (0x13c2,0x1019).
Jan 4 20:09:24 VDRHD kernel: [ 14.001679] saa7146 (0): dma buffer size 192512
Jan 4 20:09:24 VDRHD kernel: [ 14.001681] DVB: registering new adapter (TT-Budget S2-3200 PCI)
Jan 4 20:09:24 VDRHD kernel: [ 14.108528] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
Jan 4 20:09:24 VDRHD kernel: [ 14.140086] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
Jan 4 20:09:24 VDRHD kernel: [ 14.164534] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
Jan 4 20:09:24 VDRHD kernel: [ 14.192526] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
Jan 4 20:09:24 VDRHD kernel: [ 14.208530] Couldn't read from EEPROM: not there?
Jan 4 20:09:24 VDRHD kernel: [ 14.208754] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:08.0/0000:01:06.0/i$
Jan 4 20:09:24 VDRHD kernel: [ 14.347755] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
Jan 4 20:09:24 VDRHD kernel: [ 14.430537] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
Jan 4 20:09:24 VDRHD kernel: [ 14.430542] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
Jan 4 20:09:24 VDRHD kernel: [ 14.430567] HDA Intel 0000:00:07.0: setting latency timer to 64
Jan 4 20:09:25 VDRHD kernel: [ 14.677607] stb0899_attach: Attaching STB0899
Jan 4 20:09:25 VDRHD kernel: [ 14.716737] stb6100_attach: Attaching STB6100
Jan 4 20:09:25 VDRHD kernel: [ 14.734929] LNBx2x attached on addr=8
Jan 4 20:09:25 VDRHD kernel: [ 14.734933] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...

Aber w_scan brachte wahrscheinlich wegen der Fehlermeldung im Syslog
"Jan 4 20:09:24 VDRHD kernel: [ 14.192526] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer"
einen "neuen" Fehler

Quoted

w_scan -fs -s S19E2 -o 7 >> channels.conf
w_scan version 20090918 (compiled for DVB API 5.0)
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L
frontend_type DVB-S, channellist 6
output format vdr-1.7
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> DVB-S "STB0899 Multistandard": very good :-))

Using DVB-S frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.0
frontend STB0899 Multistandard supports
INVERSION_AUTO
DVB-S
DVB-S2
using LNB "UNIVERSAL"
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
(time: 02:55) diseqc_send_msg: FE_SET_VOLTAGE failed.
diseqc_send_msg: FE_SET_VOLTAGE failed.

(time: 04:03) diseqc_send_msg: FE_SET_VOLTAGE failed.
diseqc_send_msg: FE_SET_VOLTAGE failed.

ich habe dann die channels.conf von linowsat.de besorgt.
die wird auch mit vdr-sxfe schön angezeigt, leider auch da wieder

Quoted

[5667] [demux_vdr] PMT changed
[5667] [input_vdr] No data in 8 seconds, queuing no signal image
[5667] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
[5666] [input_vdr] vdr_flush_engine: playback is paused <0>

da ja schon der w-scan Probleme hatte.

Also benötige ich mal wieder Hilfe :schiel

YaVDR 0.4, xine, SD+HD temporal_spatial, Ton über HDMI an LG 42LH3000 bei 1920x1080_50,
Gigabyte GA-M720-US3, AMD X2 235e, Asus Bravo 9500, 4GB Speicher, 2x TT S2-3200, 1x Skystar Ver 2.3

This post has been edited 1 times, last edit by "oldspies2" (Jan 4th 2010, 9:51pm)

Go to the top of the page

walzing

Beginner

Posts: 10

87

Monday, January 4th 2010, 9:46pm

Habs im moment nicht laufen, schau aber morgen. Bin mir auch nicht sicher, ob der nv Treiber mit VDPAU läuft.

Compiz abschalten war mit:

	Source code
1 2 3	Section "Extensions" Option "Composite" "Disable" EndSection

in der xorg.conf oder?

cu
Walzing

Go to the top of the page

Nix

Intermediate

Posts: 488

Location: südlich v. Hamburg, nördlich v. München

88

Tuesday, January 5th 2010, 7:47am

Der nv-Treiber ist der opensource-Treiber, oder? Der läuft sicher nicht mit VDPAU.

Gruß, Nix

Produktiv: Thermaltake DF101, Imon VFD. Gigabyte H67-Board, i3-2120, 8GB Ram, GeForce 520, 6 TB Video-Part., Cine S2, yavdr 0.5, Frontend vdr-sxfe
Motto: Ihr seid alt genug, ihr könnt machen was ich will...

Go to the top of the page

walzing

Beginner

Posts: 10

89

Tuesday, January 5th 2010, 9:37am

Ne war schon mit VPDAU, aber 185er Version. Habs dann heute morgen geupdatet:

Source code

Walzing@xbmc:~$ dpkg --get-selections |grep nvidia
nvidia-185-libvdpau                             deinstall
nvidia-195-kernel-source                        install
nvidia-195-libvdpau                             install
nvidia-glx-185                                  deinstall
nvidia-glx-195                                  install
nvidia-settings                                 install

Danach war dann das Tearing weg. Bei Pro Sieben (Alle lieben Chris) war das Bild dann TOP! Bei Sat.1 (Frühstücksfernsehen) und RTL (Frauentausch :evil:

) hatte ich dann aber noch immer deutliche deinterlace Probleme!

cu
Walzing

Go to the top of the page

Nix

Intermediate

Posts: 488

Location: südlich v. Hamburg, nördlich v. München

90

Tuesday, January 5th 2010, 11:01am

Das ist dann aber nicht der nv-Treiber, sondern der nvidia-Treiber. Das sind schon Unterschiede, die dann zu Missverständnissen führen können.

Gruß, Nix

Produktiv: Thermaltake DF101, Imon VFD. Gigabyte H67-Board, i3-2120, 8GB Ram, GeForce 520, 6 TB Video-Part., Cine S2, yavdr 0.5, Frontend vdr-sxfe
Motto: Ihr seid alt genug, ihr könnt machen was ich will...

Go to the top of the page

Wicky

Sage

Posts: 4,443

Location: NRW

91

Tuesday, January 5th 2010, 8:43pm

RE: [Howto] Ubuntu 9.10 + vdr + xbmc

Hallo zusammen,

@tkaufmann und htpcuser
Vielen Dank für eure Anregungen zu den Themen vdr-sxfe Aufruf und Compiz. :vdr1

Ich habe die Änderungen nun eingearbeitet.

Gruß
Wicky

Hardware: M2NPV-VM, AthlonXP-64 5700, Samsung 1TB HD, TT-1600, GF210
Software: Ubuntu 10.04 und yaVDR Pakete
dxr3-Links: dxr3config, dxr3-Howto

, dxr3-Modul-Entwicklerseite, dxr3-Plugin-Entwicklerseite

Go to the top of the page

wbreu

Sage

Posts: 3,267

92

Tuesday, January 5th 2010, 8:49pm

RE: [Howto] Ubuntu 9.10 + vdr + xbmc

Hallo Wicky,

noch ein Tip zum X-Server, man sollte hier bei Verwendung von vdpau unbedingt eine 50 Hz Modeline einbauen, sonst gibt es sehr oft Ruckeln, da der Ton immer wieder mit dem Videomaterial gesynct wird.

Das Videomaterial kommt in der Regel (Deinterlacer bob, temporal, temporal_spatial) mit 50 Hz Progressiv aus dem Deinterlacer.

Siehe code von vdpau:

Source code

"bob\nBasic deinterlacing, doing 50i->50p.\n\n",
"half temporal\nDisplays first field only, doing 50i->25p\n\n",
"half temporal_spatial\nDisplays first field only, doing 50i->25p\n\n",
"temporal\nVery good, 50i->50p\n\n",
"temporal_spatial\nThe best, but very GPU intensive.\n\n",

oder eben hier:

http://wbreu.htpc-forum.de/vdpaukompendi…chips/index.php

Gruß
Wolfgang

Hardware: -
Software: -

Go to the top of the page

oldspies2

Professional

Posts: 527

93

Wednesday, January 6th 2010, 10:17pm

Schlussendlich läuft es.
Der letzte Fehler verschwand nachdem ich die "dvb-s2api-liplianin - 0~2009-12-24.hg14010-3tvt1 " noch dazugepackt habe.
Es kann so einfach sein....

Jetzt habe ich aber noch ein paar Fragen.
Beim Start VDR kommt im syslog "ERROR: too many CA ids!" Wichtig?

Wo trage ich die die Vorgaben für "temporal_spatial" ein?
Da finde ich keine Datei "2.4.6.1 xineliboutput-1.0.4 (meist in /root/.xine/config_xineliboutput)" Wbreu's Wie bekomme ich ein lauffähiges System für xineliboutput mit vdpau?
Unter plugin.xineliboutput.conf steht nicht viel drin, da einfach dazuschreiben?? Und vor allem was genau?

Bernd

YaVDR 0.4, xine, SD+HD temporal_spatial, Ton über HDMI an LG 42LH3000 bei 1920x1080_50,
Gigabyte GA-M720-US3, AMD X2 235e, Asus Bravo 9500, 4GB Speicher, 2x TT S2-3200, 1x Skystar Ver 2.3

Go to the top of the page

cduerr

Intermediate

Posts: 159

94

Wednesday, January 6th 2010, 10:59pm

Hat jemand schon mal versucht, Live TV in das Skin "Alaska" einzuarbeiten und könnte dies evtl. zur Verfügung stellen? Das sieht IMO so super aus und ich würde das gerne nutzen, gerne stecke ich auch etwas Arbeit rein.

Danke und Gruß

Server: Asus P5BP-E/4L (BIOS-Bugs ohne Ende, kein VT-d, ...), Xeon L3360, 8GB, 9,6TB, DVD-RW, Ubuntu 12.04 AMD64, Samba 3.6.3, vdr-1.7.27 (yavdr PPA), vdr-streamdev-server
Client: Asus M3N78-EM, 5050e, 4GB, 320GB, 8400GS, DVD-RW, Ubuntu 10.04 AMD64, nvidia 295.75, vdr-1.7.27 (yavdr PPA), vdr-streamdev-client, xineliboutput...

Go to the top of the page

oldspies2

Professional

Posts: 527

95

Sunday, January 10th 2010, 5:07pm

Ich hab noch ein Problem.
Ich will die Ausgabe von vdr-sxfe mir dem Schalter "-d" auf den zweiten Screen ausgeben.

Quoted

vdr@VDRHD:~$ vdr-sxfe -d 1 xvdr+tcp://127.0.0.1:37890
vdr-sxfe 1.0.90-cvs (build with xine-lib 1.1.90, using xine-lib 1.1.90)

VDR Server: xvdr+tcp://127.0.0.1:37890

[6824] [vdr-fe] GNOME screensaver disabled
vo_vdpau: vdpau API version : 1
vo_vdpau: vdpau implementation description : NVIDIA VDPAU Driver Shared Library 195.30 Fri Dec 18 17:11:08 PST 2009
[6824] [vdr-fe] Detected 2 CPUs
[6824] [vdr-fe] Enabling FFmpeg multithreaded video decoding
[6824] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
[6824] [input_vdr] Server greeting: VDR-1.7.10 xineliboutput-1.0.90-cvs READY
[6824] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
[6824] [input_vdr] Connecting (data) to tcp://127.0.0.1:37890 ...
[6824] [input_vdr] Data stream connected (TCP)
[6824] [input_vdr] Using non-default "media.xvdr.num_buffers_hd:4000"
[6824] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
[6824] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
[6824] [demux_vdr] Using decoder "FFmpeg" for H.264 video

Leider funzt das nicht, der Schalter sollte richtig sein, da in nvidia-setting er so drin und eine andere Aufruf zu einem Fehler führt.

Quoted

dr@VDRHD:~$ vdr-sxfe -d VDRHD:1.1 xvdr+tcp://127.0.0.1:37890
vdr-sxfe 1.0.90-cvs (build with xine-lib 1.1.90, using xine-lib 1.1.90)
VDR Server: xvdr+tcp://127.0.0.1:37890
[6784] [vdr-sxfe] sxfe_display_open: failed to connect to X server (VDRHD:1.1)
[6784] [vdr-sxfe] (ERROR (xine_sxfe_frontend.c,962): Connection refused)

Die xorg.conf

Quoted

Section "ServerLayout"

Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-1"
HorizSync 31.0 - 80.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "LG TV"
HorizSync 30.0 - 83.0
VertRefresh 58.0 - 62.0
ModeLine "1920x1080@50" 143.55 1920 1952 2496 2528 1080 1103 1112 1135 +hsync +vsync
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9500 GT"
BusID "PCI:2:0:0"
Screen 0
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9500 GT"
BusID "PCI:2:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT: 1280x1024_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP: 1920x1080_50i +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Disable"
EndSection

Leider gibt die Xorg.0.log

Quoted

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux VDRHD 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=a6016807-8518-41ef-87e5-bf6dff2ac58b ro quiet splash
Build Date: 26 October 2009 05:19:56PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Jan 10 16:10:15 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Device1"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 9

(--) PCI:*(0:2:0:0) 10de:0640:1043:82f4 nVidia Corporation G96 [GeForce 9500 GT] rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 195.30 Fri Dec 18 17:09:18 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 195.30 Fri Dec 18 16:24:01 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 02@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT: 1280x1024_60 +0+0"
(**) Jan 10 16:10:15 NVIDIA(0): Enabling RENDER acceleration
(WW) Jan 10 16:10:16 NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
(II) Jan 10 16:10:16 NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:2:0:0 (GPU-0)
(--) Jan 10 16:10:16 NVIDIA(0): Memory: 524288 kBytes
(--) Jan 10 16:10:16 NVIDIA(0): VideoBIOS: 62.94.4b.00.00
(II) Jan 10 16:10:16 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Jan 10 16:10:16 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jan 10 16:10:16 NVIDIA(0): Connected display device(s) on GeForce 9500 GT at PCI:2:0:0:
(--) Jan 10 16:10:16 NVIDIA(0): CRT-1
(--) Jan 10 16:10:16 NVIDIA(0): LG TV (DFP-1)
(--) Jan 10 16:10:16 NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
(--) Jan 10 16:10:16 NVIDIA(0): LG TV (DFP-1): 165.0 MHz maximum pixel clock
(--) Jan 10 16:10:16 NVIDIA(0): LG TV (DFP-1): Internal Single Link TMDS
(II) Jan 10 16:10:16 NVIDIA(0): Display Device found referenced in MetaMode: CRT-1
(II) Jan 10 16:10:16 NVIDIA(0): Assigned Display Device: CRT-1
(II) Jan 10 16:10:16 NVIDIA(0): Validated modes:
(II) Jan 10 16:10:16 NVIDIA(0): "CRT:1280x1024_60+0+0"
(II) Jan 10 16:10:16 NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(WW) Jan 10 16:10:16 NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
(WW) Jan 10 16:10:16 NVIDIA(0): from CRT-1's EDID.
(==) Jan 10 16:10:16 NVIDIA(0): DPI set to (75, 75); computed from built-in default
(==) Jan 10 16:10:16 NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "DFP: 1920x1080_50i +0+0"
(**) Jan 10 16:10:16 NVIDIA(1): Enabling RENDER acceleration
(II) Jan 10 16:10:16 NVIDIA(1): NVIDIA GPU GeForce 9500 GT (G96) at PCI:2:0:0 (GPU-0)
(--) Jan 10 16:10:16 NVIDIA(1): Memory: 524288 kBytes
(--) Jan 10 16:10:16 NVIDIA(1): VideoBIOS: 62.94.4b.00.00
(II) Jan 10 16:10:16 NVIDIA(1): Detected PCI Express Link width: 16X
(--) Jan 10 16:10:16 NVIDIA(1): Interlaced video modes are supported on this GPU
(--) Jan 10 16:10:16 NVIDIA(1): Connected display device(s) on GeForce 9500 GT at PCI:2:0:0:
(--) Jan 10 16:10:16 NVIDIA(1): CRT-1
(--) Jan 10 16:10:16 NVIDIA(1): LG TV (DFP-1)
(--) Jan 10 16:10:16 NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock
(--) Jan 10 16:10:16 NVIDIA(1): LG TV (DFP-1): 165.0 MHz maximum pixel clock
(--) Jan 10 16:10:16 NVIDIA(1): LG TV (DFP-1): Internal Single Link TMDS
(II) Jan 10 16:10:16 NVIDIA(1): Display Device found referenced in MetaMode: DFP-1
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode "1280x720"
(WW) Jan 10 16:10:16 NVIDIA(1): is specified in the EDID; however, the EDID's valid
(WW) Jan 10 16:10:16 NVIDIA(1): VertRefresh range (58.000-62.000 Hz) would exclude this
(WW) Jan 10 16:10:16 NVIDIA(1): mode's VertRefresh (50.0 Hz); ignoring VertRefresh check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "1280x720".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode "720x576"
(WW) Jan 10 16:10:16 NVIDIA(1): is specified in the EDID; however, the EDID's valid
(WW) Jan 10 16:10:16 NVIDIA(1): VertRefresh range (58.000-62.000 Hz) would exclude this
(WW) Jan 10 16:10:16 NVIDIA(1): mode's VertRefresh (50.0 Hz); ignoring VertRefresh check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "720x576".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's HorizSync (27.0 kHz); ignoring HorizSync check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (25.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (30.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode "720x576"
(WW) Jan 10 16:10:16 NVIDIA(1): is specified in the EDID; however, the EDID's valid
(WW) Jan 10 16:10:16 NVIDIA(1): HorizSync range (30.000-83.000 kHz) would exclude this
(WW) Jan 10 16:10:16 NVIDIA(1): mode's HorizSync (15.6 kHz); ignoring HorizSync check for
(WW) Jan 10 16:10:16 NVIDIA(1): mode "720x576".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode "720x576"
(WW) Jan 10 16:10:16 NVIDIA(1): is specified in the EDID; however, the EDID's valid
(WW) Jan 10 16:10:16 NVIDIA(1): VertRefresh range (58.000-62.000 Hz) would exclude this
(WW) Jan 10 16:10:16 NVIDIA(1): mode's VertRefresh (50.1 Hz); ignoring VertRefresh check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "720x576".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode "1280x720"
(WW) Jan 10 16:10:16 NVIDIA(1): is specified in the EDID; however, the EDID's valid
(WW) Jan 10 16:10:16 NVIDIA(1): VertRefresh range (58.000-62.000 Hz) would exclude this
(WW) Jan 10 16:10:16 NVIDIA(1): mode's VertRefresh (50.0 Hz); ignoring VertRefresh check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "1280x720".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode "720x576"
(WW) Jan 10 16:10:16 NVIDIA(1): is specified in the EDID; however, the EDID's valid
(WW) Jan 10 16:10:16 NVIDIA(1): VertRefresh range (58.000-62.000 Hz) would exclude this
(WW) Jan 10 16:10:16 NVIDIA(1): mode's VertRefresh (50.0 Hz); ignoring VertRefresh check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "720x576".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's HorizSync (27.0 kHz); ignoring HorizSync check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid HorizSync range (30.000-83.000 kHz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (25.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode
(WW) Jan 10 16:10:16 NVIDIA(1): "1920x1080" is specified in the EDID; however, the EDID's
(WW) Jan 10 16:10:16 NVIDIA(1): valid VertRefresh range (58.000-62.000 Hz) would exclude
(WW) Jan 10 16:10:16 NVIDIA(1): this mode's VertRefresh (30.0 Hz); ignoring VertRefresh
(WW) Jan 10 16:10:16 NVIDIA(1): check for mode "1920x1080".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode "720x576"
(WW) Jan 10 16:10:16 NVIDIA(1): is specified in the EDID; however, the EDID's valid
(WW) Jan 10 16:10:16 NVIDIA(1): HorizSync range (30.000-83.000 kHz) would exclude this
(WW) Jan 10 16:10:16 NVIDIA(1): mode's HorizSync (15.6 kHz); ignoring HorizSync check for
(WW) Jan 10 16:10:16 NVIDIA(1): mode "720x576".
(WW) Jan 10 16:10:16 NVIDIA(1): The EDID for LG TV (DFP-1) contradicts itself: mode "720x576"
(WW) Jan 10 16:10:16 NVIDIA(1): is specified in the EDID; however, the EDID's valid
(WW) Jan 10 16:10:16 NVIDIA(1): VertRefresh range (58.000-62.000 Hz) would exclude this
(WW) Jan 10 16:10:16 NVIDIA(1): mode's VertRefresh (50.1 Hz); ignoring VertRefresh check
(WW) Jan 10 16:10:16 NVIDIA(1): for mode "720x576".
(II) Jan 10 16:10:16 NVIDIA(1): Assigned Display Device: DFP-1
(II) Jan 10 16:10:16 NVIDIA(1): Validated modes:
(II) Jan 10 16:10:16 NVIDIA(1): "DFP:1920x1080_50i+0+0"
(II) Jan 10 16:10:16 NVIDIA(1): Virtual screen size determined to be 1920 x 1080
(--) Jan 10 16:10:16 NVIDIA(1): DPI set to (42, 42); computed from "UseEdidDpi" X config
(--) Jan 10 16:10:16 NVIDIA(1): option
(==) Jan 10 16:10:16 NVIDIA(1): Disabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? Yes, I do.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Jan 10 16:10:16 NVIDIA(0): Initialized GPU GART.
(II) Jan 10 16:10:16 NVIDIA(0): Setting mode "CRT:1280x1024_60+0+0"
(II) Loading extension NV-GLX
(II) Jan 10 16:10:16 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Jan 10 16:10:16 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Jan 10 16:10:16 NVIDIA(1): Initialized GPU GART.
(II) Jan 10 16:10:16 NVIDIA(1): Setting mode "DFP:1920x1080_50i+0+0"
(II) Jan 10 16:10:16 NVIDIA(1): Initialized OpenGL Acceleration
(==) NVIDIA(1): Disabling shared memory pixmaps
(II) Jan 10 16:10:16 NVIDIA(1): Initialized X Rendering Acceleration
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(II) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.

Irgend jemand eine Idee?

Ach und noch was, obwohl überall 50i eingetragen ist und Nvidia das auch als aktiv anzeigt, gibt der Fernseher 60Hz an

Quoted

vdr@VDRHD:~$ DISPLAY=:1.0 nvidia-settings --query RefreshRate

Attribute 'RefreshRate' (VDRHD:1.0; display device: CRT-1): 60,02 Hz.
'RefreshRate' is an integer attribute.
'RefreshRate' is a read-only attribute.
'RefreshRate' is display device specific.
'RefreshRate' can use the following target types: X Screen, GPU.

vdr@VDRHD:~$ DISPLAY=:1.1 nvidia-settings --query RefreshRate

Attribute 'RefreshRate' (VDRHD:1.1; display device: DFP-1): 60,00 Hz.
'RefreshRate' is an integer attribute.
'RefreshRate' is a read-only attribute.
'RefreshRate' is display device specific.
'RefreshRate' can use the following target types: X Screen, GPU.

Bernd

YaVDR 0.4, xine, SD+HD temporal_spatial, Ton über HDMI an LG 42LH3000 bei 1920x1080_50,
Gigabyte GA-M720-US3, AMD X2 235e, Asus Bravo 9500, 4GB Speicher, 2x TT S2-3200, 1x Skystar Ver 2.3

This post has been edited 3 times, last edit by "oldspies2" (Jan 10th 2010, 5:41pm)

Go to the top of the page

Mehlwurmdieb

Intermediate

Posts: 389

Location: Bayern

Occupation: Informationselektroniker (Bürosystemtechnik); IT-Supporter im Außendienst und Selbstständig

96

Tuesday, March 16th 2010, 8:18pm

[EDIT]

Hat sich vermutlich erledigt, daher wurde der Post wieder entfernt.

Problem lag vermutlich an den XBMC Quellen (s.O.). Installiere es gerade neu um die "Kein PVR Server gefunden" Meldung zu beseitigen. Sollte man im HowTo mal anpassen.

sudo add-apt-repository ppa:team-xbmc

[/EDIT]

VDR Server:
HW: ASUS M3N78-EM (NV-GF8300) • 2GB DDR2-800 Kingston, CL6 • AMD Athlon II X2 DC 215, 2.7GHz, 1MB • 1TB Seagate • TT 1,6 FF • Hauppauge WINTV Nova-HD-S2 • SW: Ubuntu 10.04 Lucid Lynx • VDR 1.7 (yaVDR 0.3 Source) • XBMC-PVR (VNSI) • VDPAU
VDR Streamingclient
HW: ZOTAC ZBOX HD-ND01 - Atom 330 / 1.6GHz DC • 1GB DDR2 • 40GB • SW: wie oben

This post has been edited 2 times, last edit by "Mehlwurmdieb" (Mar 16th 2010, 9:08pm)

Go to the top of the page

Nix

Intermediate

Posts: 488

Location: südlich v. Hamburg, nördlich v. München

97

Tuesday, March 16th 2010, 9:07pm

Hallo Mehlwurmdieb,

es ist nicht so schön, wenn man seine eigenen Postings soweit editiert, dass andere nicht mehr nachvollziehen können, was das Problem war. Jemand, der vor dem selben Problem steht wie Du, hätte hier jetzt die Frage gefunden und auch gleich die Lösung dazu. Nun nicht mehr.

Gruß, Nix

Produktiv: Thermaltake DF101, Imon VFD. Gigabyte H67-Board, i3-2120, 8GB Ram, GeForce 520, 6 TB Video-Part., Cine S2, yavdr 0.5, Frontend vdr-sxfe
Motto: Ihr seid alt genug, ihr könnt machen was ich will...

Go to the top of the page

Mehlwurmdieb

Intermediate

Posts: 389

Location: Bayern

Occupation: Informationselektroniker (Bürosystemtechnik); IT-Supporter im Außendienst und Selbstständig

98

Tuesday, March 16th 2010, 10:17pm

Quoted

Original von Nix
Hallo Mehlwurmdieb,

es ist nicht so schön, wenn man seine eigenen Postings soweit editiert, dass andere nicht mehr nachvollziehen können, was das Problem war. Jemand, der vor dem selben Problem steht wie Du, hätte hier jetzt die Frage gefunden und auch gleich die Lösung dazu. Nun nicht mehr.

Gruß, Nix

Hallo Nix,

das ist mir klar, wollte den Post nur entfernen, weil es eventuell nur verwirrt und der Threat ja schon mit so vielen Problemen ziemlich unübersichtlich ist.

Aber nochmal kurz was mein Problem war und was geholfen hat:

Habe XBMC mit den Sourcen des HowTo's (im (1. Post) installiert und habe das VDR Plugin im PM3.HD Skin nicht gefunden. Beim Live TV kam dann immer die Meldung "Kein PVR Server gefunden".

Anderst als im HowTo beschrieben kann der Confluence Skin mittlerweile auch Live TV. Und dort lässt sich das Plugin in den Einstellungen auch aktivieren (unter Plugins).

Ich dachte zuerst ich hätte die falschen Sourcen benutzt, doch die im HowTo angegebenen stimmen schon. Man darf nur eben nicht PM3.HD benutzen (zumindest bis das Plugin über Confluence aktiviert wurde).

Mein ursprünglicher Post war schlichtweg falsch, deshalb hab ich Ihn entfernt.

VDR Server:
HW: ASUS M3N78-EM (NV-GF8300) • 2GB DDR2-800 Kingston, CL6 • AMD Athlon II X2 DC 215, 2.7GHz, 1MB • 1TB Seagate • TT 1,6 FF • Hauppauge WINTV Nova-HD-S2 • SW: Ubuntu 10.04 Lucid Lynx • VDR 1.7 (yaVDR 0.3 Source) • XBMC-PVR (VNSI) • VDPAU
VDR Streamingclient
HW: ZOTAC ZBOX HD-ND01 - Atom 330 / 1.6GHz DC • 1GB DDR2 • 40GB • SW: wie oben

This post has been edited 1 times, last edit by "Mehlwurmdieb" (Mar 16th 2010, 10:20pm)

Go to the top of the page

Mehlwurmdieb

Intermediate

Posts: 389

Location: Bayern

Occupation: Informationselektroniker (Bürosystemtechnik); IT-Supporter im Außendienst und Selbstständig

99

Friday, March 19th 2010, 7:47pm

Hi,

ich bekomme unter xineliboutput (1.0.90-cvs) kein Software Scaling zum laufen. Wenn ich die Option aktiviere stürzt mir sofort das Xine (über vdr-sxfe gestartet) Fenster ab, mit der Fehlermeldung "Segmentation Fault".

Source code

post_warp: warp_get_parameters
post_warp: warp_set_parameters: output_width=0, output_height=0, output_aspect=1.250, no_downscaling=0
post_warp: warp_get_parameters
post_warp: warp_set_parameters: output_width=1920, output_height=0, output_aspect=1.250, no_downscaling=0
post_warp: warp_get_parameters
post_warp: warp_set_parameters: output_width=1920, output_height=1080, output_aspect=1.250, no_downscaling=0
post_warp: warp_get_parameters
post_warp: warp_set_parameters: output_width=1920, output_height=1080, output_aspect=1.250, no_downscaling=0
post_warp: warp_get_parameters
post_warp: dispose
post_warp: detected frame format change: 0x0 -> 720x576, interlaced 0->1, aspect 0.000->1.778, yuy2->yv12
post_warp: aspect ratio diff 0.528 > 0 : 16.9...12:9 -> 4:3
post_warp: factor_x = 0.941 factor_y = 1.178  output ratio = 1.250
post_warp: init_yv12: 720x576->1920x1080 hWarp 0.941 vWarp 1.178
Segmentation fault

Aktuelle NVidia Treiber sind installiert.
Bei meinem alten EasyVDR ging es jedoch unter der gleichen Hardware.

Im Xinelibout ist Lokale Anzeige auf aus gestellt. Beim EasyVDR war dies auf X11 (Auto) gestellt. Wenn ich diese Option aktiviere bekomme ich jedoch folgende Meldung im VDR angezeigt:
"Starten des Frontends fehlgeschlagen"

Vielleicht kennt ja jemand das Problem.

mfg

VDR Server:
HW: ASUS M3N78-EM (NV-GF8300) • 2GB DDR2-800 Kingston, CL6 • AMD Athlon II X2 DC 215, 2.7GHz, 1MB • 1TB Seagate • TT 1,6 FF • Hauppauge WINTV Nova-HD-S2 • SW: Ubuntu 10.04 Lucid Lynx • VDR 1.7 (yaVDR 0.3 Source) • XBMC-PVR (VNSI) • VDPAU
VDR Streamingclient
HW: ZOTAC ZBOX HD-ND01 - Atom 330 / 1.6GHz DC • 1GB DDR2 • 40GB • SW: wie oben

This post has been edited 2 times, last edit by "Mehlwurmdieb" (Mar 19th 2010, 9:54pm)

Go to the top of the page

netvista-fan

Sage

Posts: 3,489

Location: mitten im Ruhrgebiet

Occupation: Dipl. Ing.

100

Friday, March 19th 2010, 9:59pm

Karmic vdr-team nvidia 195 und libxine2

Hallo,
fehlt im vdr-team repository irgendwie der 195er nvidia Treiber?
Das xineliboutput-sxfe braucht ja libxine1 und libxine2 wobei libxine2 irgendein 195er vdpau Paket braucht...

Nur ist der 195er leider nicht dabei, auch kein libxine2.
Daher wollen xineliboutput-sxfe und libxine1 auch nicht.

Hab ich nen Denkfehler oder haben die Jungs den Treiber spontan mal rausgeworfen?

Gibts nicht ein ordentliches repository was den Standard karmic 185er nutzt?
Hätte den Vorteil des vdpau mplayers den ich recht nett find...

Go to the top of the page

VDR Portal

Source code

Source code

Source code

Quoted

Quoted

Quoted

Source code

Source code

RE: [Howto] Ubuntu 9.10 + vdr + xbmc

RE: [Howto] Ubuntu 9.10 + vdr + xbmc

Source code

Quoted

Quoted

Quoted

Quoted

Quoted

Quoted

Source code

Karmic vdr-team nvidia 195 und libxine2