Hallo!
Vielleicht kennt ja hier wer mein Problem und hat sogar eine lösung für mich!
Ich versuche schon seit ein paar Tagen das ganze zum laufen zu überreden, jedoch ohne großen Erfolg.
NVRAM guess-script hat mir eine konfigurationen erzeugt. Das einzige was funktioniert ist allerdings directisa. Die Zeit wird dabei richitg im BIOS gestzt. Was nicht funktioniert ist das aktivieren und deaktivieren des RTC-Alarms. Ist mir aber auch nicht so wichtig.
Wenn ich eine Zeit gesetzt habe und den Rechner herunterfahren will ('init 0' oder 'shutdown -h now' oder ...) fährt der Rechner herunter und startet sofort wieder neu. Ohne aktivierteer RTC-Alarm-Zeit funktioniert alles wie erwartet.
Funktioniert das schreiben in den nvram nicht richtig und es werden jedesmal Werte überschrieben die nicht überschrieben werden sollten? Oder läuft sonst villeicht was schief, oder geht es villeicht garnicht mit diesem Board?
Daten:
Board: Epox EP-8kta3+ Pro
NVRAM-Wakeup: 0.97
VDR: 1.3.12
Kernel: 2.6.5-7.104 (SuSE)
Ausgaben beim aufruf von NVRAM-Wakeup:
/dev/nvram:
vdr:~/guess-nvram-module # nvram-wakeup -C nvram-wakeup.conf -s 1093247547
nvram-wakeup: addr_stat (0xFF) is beyond the end of nvram
nvram-wakeup: You might want to use the --directisa command line option.
directisa:
vdr:~/guess-directisa # nvram-wakeup -C nvram-wakeup.conf -s 1093257547 --directisa
All values are displayed as they are stored in the nvram/rtc.
(and do not correspond necessarily to the system date/time)
WakeUp : Enabled (0xFF)
Day : 23 (0x17)
Hour : 11 (0x0B)
Minute : 20 (0x14)
Second : 26 (0x1A)
Checksum: 0x0CB7
Enabling (0xFF) WakeUp-on-RTC in nvram.
New Day : 23 (0x17)
New Hour : 12 (0x0C)
New Minute : 34 (0x22)
New Second : 07 (0x07)
New Checksum: 0x0CB3
Now really WRITING into /dev/nvram...
nvram-wakeup.conf:
################################################
## Mainboard autodetection information:
##
## - Mainboard vendor: ""
## - Mainboard type: "8363A-686B"
## - Mainboard revision: ""
## - BIOS vendor: "Award Software International, Inc."
## - BIOS version: "6.00 PG"
## - BIOS release: "02/05/2002"
addr_sec = 0x3F
addr_min = 0x40
addr_hour = 0x41
addr_day = 0x53
addr_chk_h = 0x6D
addr_chk_l = 0x6E
upper_method = VT82Cxxx
Wäre super wenn jemand eine Idee hätte!
geordy