[gelöst] Falsche keymap wird geladen

dippes · 31. Oktober 2014

Ich will auf meinem Linux mint 7 für den vdr meine x 10 Funkfernbedienung installieren.
Soweit tut sie schon

Code

a~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event9) with:
        Driver ati_remote, table rc-medion-x10-or2x
        Supported protocols: other 
        Enabled protocols: 
        Name: X10 WTI RF receiver
        bus: 3, vendor/product: 0bc7:0006, version: 0x0200
        Repeat delay = 500 ms, repeat period = 125 ms

Blos wird die falsche keymap geladen.

Lt rc_keymaps.conf sollte "rc-medion-x10" geladen werden,tuts aber nicht.

Code

ati_remote    rc-medion-x10   /etc/rc_keymaps/rc-medion-x10

0

was fehlt denn da?

dippes

seahawk1986 · 31. Oktober 2014

Ein a?

dippes · 31. Oktober 2014

nein ist nur ein Kopierfehler,
Steht in der rc_maps.cfg korrekt drinne

seahawk1986 · 31. Oktober 2014

Die keytable auf die du matchen willst heißt ja eigentlich rc-medion-x10-or2x

Code

ati_remote    rc-medion-x10-or2x   /etc/rc_keymaps/rc-medion-x10

Alternativ sollte es ein Sternchen tun:

Code

ati_remote    *   /etc/rc_keymaps/rc-medion-x10

dippes · 31. Oktober 2014

Ir-keytable -r ladet jetzt die richtige keymap

aber benutzt wirds immer noch die falsche "rc-medion-x10-or2x" ist wohl die vom core

Code

laurent-keller ~ # ir-keytable -r
scancode 0x0000 = KEY_MUTE (0x71)
scancode 0x0002 = KEY_POWER2 (0x164)
scancode 0x0004 = KEY_CYCLEWINDOWS (0x9a)
scancode 0x0005 = KEY_AUDIO (0x188)
scancode 0x0006 = KEY_MODE (0x175)
scancode 0x0008 = KEY_VOLUMEDOWN (0x72)
scancode 0x0009 = KEY_VOLUMEUP (0x73)
scancode 0x000b = KEY_CHANNELUP (0x192)
scancode 0x000c = KEY_CHANNELDOWN (0x193)
scancode 0x000d = KEY_1 (0x02)
scancode 0x000e = KEY_2 (0x03)
scancode 0x000f = KEY_3 (0x04)
scancode 0x0010 = KEY_4 (0x05)
scancode 0x0011 = KEY_5 (0x06)
scancode 0x0012 = KEY_6 (0x07)
scancode 0x0013 = KEY_7 (0x08)
scancode 0x0014 = KEY_8 (0x09)
scancode 0x0015 = KEY_9 (0x0a)
scancode 0x0016 = KEY_VIDEO (0x189)
scancode 0x0017 = KEY_0 (0x0b)
scancode 0x0018 = KEY_INFO (0x166)
scancode 0x0019 = KEY_SUBTITLE (0x172)
scancode 0x001a = KEY_UP (0x67)
scancode 0x001b = KEY_MENU (0x8b)
scancode 0x001c = KEY_IMAGES (0x1ba)
scancode 0x001d = KEY_LEFT (0x69)
scancode 0x001e = KEY_OK (0x160)
scancode 0x001f = KEY_RIGHT (0x6a)
scancode 0x0020 = KEY_ESC (0x01)
scancode 0x0021 = KEY_BACK (0x9e)                                                                                                                                                                                 
scancode 0x0022 = KEY_DOWN (0x6c)                                                                                                                                                                                 
scancode 0x0023 = KEY_NEXT (0x197)                                                                                                                                                                                
scancode 0x0024 = KEY_REWIND (0xa8)                                                                                                                                                                               
scancode 0x0025 = KEY_PLAY (0xcf)                                                                                                                                                                                 
scancode 0x0026 = KEY_FASTFORWARD (0xd0)                                                                                                                                                                          
scancode 0x0027 = KEY_RECORD (0xa7)                                                                                                                                                                               
scancode 0x0028 = KEY_STOP (0x80)                                                                                                                                                                                 
scancode 0x0029 = KEY_PAUSE (0x77)                                                                                                                                                                                
scancode 0x002c = KEY_PROG3 (0xca)                                                                                                                                                                                
scancode 0x002d = KEY_PVR (0x16e)                                                                                                                                                                                 
scancode 0x002e = KEY_PROG4 (0xcb)                                                                                                                                                                                
scancode 0x002f = KEY_EPG (0x16d)                                                                                                                                                                                 
scancode 0x0030 = KEY_CHANNEL (0x16b)                                                                                                                                                                             
scancode 0x0031 = KEY_SCREEN (0x177)                                                                                                                                                                              
scancode 0x0032 = KEY_RED (0x18e)                                                                                                                                                                                 
scancode 0x0033 = KEY_GREEN (0x18f)                                                                                                                                                                               
scancode 0x0034 = KEY_YELLOW (0x190)                                                                                                                                                                              
scancode 0x0035 = KEY_BLUE (0x191)                                                                                                                                                                                
scancode 0x0036 = KEY_SPACE (0x39)                                                                                                                                                                                
scancode 0x0037 = KEY_TEXT (0x184)                                                                                                                                                                                
scancode 0x0038 = KEY_PROG1 (0x94)                                                                                                                                                                                
scancode 0x0039 = KEY_FN (0x1d0)                                                                                                                                                                                  
scancode 0x003a = KEY_MODE (0x175)

Alles anzeigen

dippes · 31. Oktober 2014

Fehlt für eventlircd die richtige udev Regel?

Code

#-------------------------------------------------------------------------------
# Ask eventlircd to handle input event devices created by ir-core (kernel).
#-------------------------------------------------------------------------------
SUBSYSTEMS=="rc", \
  ENV{eventlircd_enable}="true"


#-------------------------------------------------------------------------------
# overwrites for ircore mapping
#-------------------------------------------------------------------------------


SUBSYSTEM=="input", ATTRS{idVendor}=="1c73", ATTRS{idProduct}=="861f", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="anysee.evmap"


#-------------------------------------------------------------------------------
# Ask eventlircd to handle USB HID devices that show up as event devices and are
# known to be remote controls. For simplicity, the event map file names have the
# format <BUSTYPE>_<VENDOR>_<PRODUCT>.evmap.
#-------------------------------------------------------------------------------
SUBSYSTEMS=="usb", GOTO="begin-usb"
GOTO="end-usb"
LABEL="begin-usb"


ENV{ID_USB_INTERFACES}=="", IMPORT{program}="usb_id --export %p"


ENV{ID_VENDOR_ID}=="0419", ENV{ID_MODEL_ID}=="0001", \
  ENV{eventlircd_enable}="true",\
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="05a4", ENV{ID_MODEL_ID}=="9881", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="hama-mce.evmap"


ENV{ID_VENDOR_ID}=="4243", ENV{ID_MODEL_ID}=="ee08", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="1934", ENV{ID_MODEL_ID}=="5168", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="0755", ENV{ID_MODEL_ID}=="2626", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="045e", ENV{ID_MODEL_ID}=="006d", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="0766", ENV{ID_MODEL_ID}=="0204", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="1241", ENV{ID_MODEL_ID}=="e000", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="147a", ENV{ID_MODEL_ID}=="e02d", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="mce.evmap"


ENV{ID_VENDOR_ID}=="147a", ENV{ID_MODEL_ID}=="e03a", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="mce.evmap"


ENV{ID_VENDOR_ID}=="0c16", ENV{ID_MODEL_ID}=="0002", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="04_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="0755", ENV{ID_MODEL_ID}=="2626", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="0471", ENV{ID_MODEL_ID}=="060c", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="0471", ENV{ID_MODEL_ID}=="0815", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="18b1", ENV{ID_MODEL_ID}=="0037", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="04b4", ENV{ID_MODEL_ID}=="0101", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="1d57", ENV{ID_MODEL_ID}=="ac01", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap" 


ENV{ID_VENDOR_ID}=="22b8", ENV{ID_MODEL_ID}=="003b", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"


ENV{ID_VENDOR_ID}=="1784", ENV{ID_MODEL_ID}=="0004", \
  ENV{eventlircd_enable}="true", \
  ENV{eventlircd_evmap}="default.evmap"


# Enable wake-on-usb for the USB remotes.
ENV{eventlircd_enable}=="true", RUN+="wakeup_enable"


LABEL="end-usb"


LABEL="end"

Alles anzeigen

lsusb

Code

Bus 003 Device 002: ID 0bc7:0006 X10 Wireless Technology, Inc. Wireless Transceiver (ACPI-compliant)

Habe das von meinem yavdr übernommen, müsste doch passen?

edit:Funktioniert jetzt tadellos.

dippes · 31. Oktober 2014

Muss noch einmal schreiben.

Die Fb funktioniert, ja aber einmal Tasten drücken zweimal Kommando.Dh drücke ich 1 kommt 11.

Was ist der options Treiber Befehl dafür?

[gelöst] Falsche keymap wird geladen

Jetzt mitmachen!

Teilen