Hallo
Ich habe mal mein Kernel log dazu kopiert. Vielleicht kann wer was erkennen.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-15-generic (buildd@komainu) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #64-Ubuntu SMP Fri Jul 6 18:51:28 UTC 2012 (Ubuntu 2.6.38-15.64-generic 2.6.38.8)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-15-generic root=/dev/mapper/vdr-root ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffa0000 - 000000003ffb0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P5B-DE, BIOS P1.10 11/04/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3ffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003ffa0000
[ 0.000000] 0000000000 - 003fe00000 page 2M
[ 0.000000] 003fe00000 - 003ffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3ffa0000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 36462000 - 37229000
[ 0.000000] ACPI: RSDP 00000000000fa9d0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000003ffa0000 00038 (v01 A M I OEMRSDT 11000904 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000003ffa0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000003ffa0440 05A31 (v01 AS268 AS268101 00000101 INTL 20051117)
[ 0.000000] ACPI: FACS 000000003ffb0000 00040
[ 0.000000] ACPI: APIC 000000003ffa0390 0006C (v01 A M I OEMAPIC 11000904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000003ffa0400 0003C (v01 A M I OEMMCFG 11000904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000003ffb0040 00061 (v01 A M I AMI_OEM 11000904 MSFT 00000097)
[ 0.000000] ACPI: AAFT 000000003ffa5e80 00027 (v01 A M I OEMAAFT 11000904 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003ffa0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000003ffa0000
[ 0.000000] NODE_DATA [000000003ff9b000 - 000000003ff9ffff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffa0
[ 0.000000] On node 0 totalpages: 261935
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3527 pages used for memmap
[ 0.000000] DMA32 zone: 254425 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s84416 r8192 d22080 u524288
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258346
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-15-generic root=/dev/mapper/vdr-root ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1005404k/1048192k available (5969k kernel code, 452k absent, 42336k reserved, 4989k data, 960k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 10485760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1794.809 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3589.61 BogoMIPS (lpj=17948090)
[ 0.010010] pid_max: default: 32768 minimum: 301
[ 0.010045] Security Framework initialized
[ 0.010069] AppArmor: AppArmor initialized
[ 0.010071] Yama: becoming mindful.
[ 0.010270] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010926] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.011239] Mount-cache hash table entries: 256
[ 0.011430] Initializing cgroup subsys ns
[ 0.011436] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.011439] Initializing cgroup subsys cpuacct
[ 0.011444] Initializing cgroup subsys memory
[ 0.011455] Initializing cgroup subsys devices
[ 0.011457] Initializing cgroup subsys freezer
[ 0.011460] Initializing cgroup subsys net_cls
[ 0.011462] Initializing cgroup subsys blkio
[ 0.011509] mce: CPU supports 6 MCE banks
[ 0.011519] CPU0: Thermal monitoring enabled (TM2)
[ 0.011524] using mwait in idle threads.
[ 0.011558] SMP alternatives: switching to UP code
[ 0.022516] ACPI: Core revision 20110112
[ 0.030022] ftrace: allocating 24407 entries in 96 pages
[ 0.040078] Setting APIC routing to flat
[ 0.040386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.140785] CPU0: Intel(R) Celeron(R) CPU 430 @ 1.80GHz stepping 01
[ 0.150000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.150000] ... version: 2
[ 0.150000] ... bit width: 40
[ 0.150000] ... generic registers: 2
[ 0.150000] ... value mask: 000000ffffffffff
[ 0.150000] ... max period: 000000007fffffff
[ 0.150000] ... fixed-purpose events: 3
[ 0.150000] ... event mask: 0000000700000003
[ 0.150000] Brought up 1 CPUs
[ 0.150000] Total of 1 processors activated (3589.61 BogoMIPS).
[ 0.150000] devtmpfs: initialized
[ 0.150000] print_constraints: dummy:
[ 0.150000] Time: 7:37:20 Date: 12/18/12
[ 0.150000] NET: Registered protocol family 16
[ 0.150000] ACPI: bus type pci registered
[ 0.150000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.150000] PCI: not using MMCONFIG
[ 0.150000] PCI: Using configuration type 1 for base access
[ 0.150000] bio: create slab <bio-0> at 0
[ 0.150000] ACPI: EC: Look up EC in DSDT
[ 0.150000] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.150000] ACPI: Interpreter enabled
[ 0.150000] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.150000] ACPI: Using IOAPIC for interrupt routing
[ 0.150000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.150907] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.167412] ACPI: No dock devices found.
[ 0.167416] HEST: Table not found.
[ 0.167420] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.167621] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.167816] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.167820] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.167823] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.167826] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.167828] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffffffff]
[ 0.167845] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
[ 0.167897] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
[ 0.167933] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.167937] pci 0000:00:01.0: PME# disabled
[ 0.167976] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.168018] pci 0000:00:1a.0: reg 20: [io 0xc880-0xc89f]
[ 0.168049] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.168091] pci 0000:00:1a.1: reg 20: [io 0xcc00-0xcc1f]
[ 0.168133] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.168153] pci 0000:00:1a.7: reg 10: [mem 0xfceffc00-0xfcefffff]
[ 0.168224] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.168229] pci 0000:00:1a.7: PME# disabled
[ 0.168251] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.168267] pci 0000:00:1b.0: reg 10: [mem 0xfcef8000-0xfcefbfff 64bit]
[ 0.168324] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.168328] pci 0000:00:1b.0: PME# disabled
[ 0.168348] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.168405] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.168409] pci 0000:00:1c.0: PME# disabled
[ 0.168432] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[ 0.168489] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.168493] pci 0000:00:1c.2: PME# disabled
[ 0.168517] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.168558] pci 0000:00:1d.0: reg 20: [io 0xc400-0xc41f]
[ 0.168593] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.168634] pci 0000:00:1d.1: reg 20: [io 0xc480-0xc49f]
[ 0.168666] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.168707] pci 0000:00:1d.2: reg 20: [io 0xc800-0xc81f]
[ 0.168748] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.168768] pci 0000:00:1d.7: reg 10: [mem 0xfceff800-0xfceffbff]
[ 0.168839] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.168844] pci 0000:00:1d.7: PME# disabled
[ 0.168862] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.168921] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
[ 0.169004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
[ 0.169042] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101
[ 0.169057] pci 0000:00:1f.2: reg 10: [io 0xb080-0xb087]
[ 0.169066] pci 0000:00:1f.2: reg 14: [io 0xb000-0xb003]
[ 0.169075] pci 0000:00:1f.2: reg 18: [io 0xac00-0xac07]
[ 0.169083] pci 0000:00:1f.2: reg 1c: [io 0xa880-0xa883]
[ 0.169092] pci 0000:00:1f.2: reg 20: [io 0xa800-0xa80f]
[ 0.169101] pci 0000:00:1f.2: reg 24: [io 0xa480-0xa48f]
[ 0.169124] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.169128] pci 0000:00:1f.2: PME# disabled
[ 0.169142] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.169154] pci 0000:00:1f.3: reg 10: [mem 0xfceff400-0xfceff4ff]
[ 0.169183] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.169216] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101
[ 0.169231] pci 0000:00:1f.5: reg 10: [io 0xc080-0xc087]
[ 0.169240] pci 0000:00:1f.5: reg 14: [io 0xc000-0xc003]
[ 0.169248] pci 0000:00:1f.5: reg 18: [io 0xbc00-0xbc07]
[ 0.169257] pci 0000:00:1f.5: reg 1c: [io 0xb880-0xb883]
[ 0.169266] pci 0000:00:1f.5: reg 20: [io 0xb800-0xb80f]
[ 0.169275] pci 0000:00:1f.5: reg 24: [io 0xb480-0xb48f]
[ 0.169298] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.169302] pci 0000:00:1f.5: PME# disabled
[ 0.169353] pci 0000:04:00.0: [10de:0a65] type 0 class 0x000300
[ 0.169364] pci 0000:04:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.169377] pci 0000:04:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.169388] pci 0000:04:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 0.169397] pci 0000:04:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.169405] pci 0000:04:00.0: reg 30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.169451] pci 0000:04:00.1: [10de:0be3] type 0 class 0x000403
[ 0.169462] pci 0000:04:00.1: reg 10: [mem 0xfebfc000-0xfebfffff]
[ 0.169549] pci 0000:00:01.0: PCI bridge to [bus 04-04]
[ 0.169553] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.169557] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.169562] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
[ 0.169625] pci 0000:02:00.0: [9710:9990] type 0 class 0x000c03
[ 0.169646] pci 0000:02:00.0: reg 10: [mem 0xfcff8000-0xfcff8fff]
[ 0.169766] pci 0000:02:00.0: supports D1 D2
[ 0.169769] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169775] pci 0000:02:00.0: PME# disabled
[ 0.169817] pci 0000:02:00.1: [9710:9990] type 0 class 0x000c03
[ 0.169838] pci 0000:02:00.1: reg 10: [mem 0xfcff9000-0xfcff9fff]
[ 0.169958] pci 0000:02:00.1: supports D1 D2
[ 0.169961] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169967] pci 0000:02:00.1: PME# disabled
[ 0.170026] pci 0000:02:00.2: [9710:9990] type 0 class 0x000c03
[ 0.170047] pci 0000:02:00.2: reg 10: [mem 0xfcffa000-0xfcffafff]
[ 0.170167] pci 0000:02:00.2: supports D1 D2
[ 0.170169] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170175] pci 0000:02:00.2: PME# disabled
[ 0.170217] pci 0000:02:00.3: [9710:9990] type 0 class 0x000c03
[ 0.170238] pci 0000:02:00.3: reg 10: [mem 0xfcffb000-0xfcffbfff]
[ 0.170358] pci 0000:02:00.3: supports D1 D2
[ 0.170360] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170367] pci 0000:02:00.3: PME# disabled
[ 0.170408] pci 0000:02:00.4: [9710:9990] type 0 class 0x000c03
[ 0.170429] pci 0000:02:00.4: reg 10: [mem 0xfcffc000-0xfcffcfff]
[ 0.170549] pci 0000:02:00.4: supports D1 D2
[ 0.170551] pci 0000:02:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170557] pci 0000:02:00.4: PME# disabled
[ 0.170598] pci 0000:02:00.5: [9710:9990] type 0 class 0x000c03
[ 0.170618] pci 0000:02:00.5: reg 10: [mem 0xfcffd000-0xfcffdfff]
[ 0.170739] pci 0000:02:00.5: supports D1 D2
[ 0.170741] pci 0000:02:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170747] pci 0000:02:00.5: PME# disabled
[ 0.170792] pci 0000:02:00.6: [9710:9990] type 0 class 0x000c03
[ 0.170812] pci 0000:02:00.6: reg 10: [mem 0xfcffe000-0xfcffefff]
[ 0.170933] pci 0000:02:00.6: supports D1 D2
[ 0.170935] pci 0000:02:00.6: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170941] pci 0000:02:00.6: PME# disabled
[ 0.170982] pci 0000:02:00.7: [9710:9990] type 0 class 0x000c03
[ 0.171003] pci 0000:02:00.7: reg 10: [mem 0xfcfff000-0xfcffffff]
[ 0.171123] pci 0000:02:00.7: supports D1 D2
[ 0.171126] pci 0000:02:00.7: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.171132] pci 0000:02:00.7: PME# disabled
[ 0.190059] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.190064] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.190069] pci 0000:00:1c.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.190075] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.190141] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.190159] pci 0000:01:00.0: reg 10: [io 0xd800-0xd8ff]
[ 0.190188] pci 0000:01:00.0: reg 18: [mem 0xddfff000-0xddffffff 64bit pref]
[ 0.190207] pci 0000:01:00.0: reg 20: [mem 0xddff8000-0xddffbfff 64bit pref]
[ 0.190258] pci 0000:01:00.0: supports D1 D2
[ 0.190261] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.190266] pci 0000:01:00.0: PME# disabled
[ 0.210015] pci 0000:00:1c.2: PCI bridge to [bus 01-01]
[ 0.210020] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.210025] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.210031] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xddffffff 64bit pref]
[ 0.210095] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.210100] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.210105] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.210111] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.210115] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.210118] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.210121] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.210124] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.210127] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[ 0.210150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.210274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.210314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.210438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.210481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.210633] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.210814] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.219391] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.219453] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.219509] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.219565] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.219622] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219679] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.219734] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.219790] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.219942] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.219950] vgaarb: loaded
[ 0.220191] SCSI subsystem initialized
[ 0.220267] libata version 3.00 loaded.
[ 0.220325] usbcore: registered new interface driver usbfs
[ 0.220338] usbcore: registered new interface driver hub
[ 0.220379] usbcore: registered new device driver usb
[ 0.220521] wmi: Mapper loaded
[ 0.220523] PCI: Using ACPI for IRQ routing
[ 0.220527] PCI: pci_cache_line_size set to 64 bytes
[ 0.220643] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.220646] reserve RAM buffer: 000000003ffa0000 - 000000003fffffff
[ 0.220767] NetLabel: Initializing
[ 0.220769] NetLabel: domain hash size = 128
[ 0.220771] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.220784] NetLabel: unlabeled traffic allowed by default
[ 0.228805] AppArmor: AppArmor Filesystem Enabled
[ 0.228842] pnp: PnP ACPI init
[ 0.228862] ACPI: bus type pnp registered
[ 0.228980] pnp 00:00: [bus 00-ff]
[ 0.228983] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.228991] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.228994] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.228996] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.228999] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.229002] pnp 00:00: [mem 0x40000000-0xffffffff window]
[ 0.229067] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.229080] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.229155] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.229160] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.229214] pnp 00:02: [dma 4]
[ 0.229216] pnp 00:02: [io 0x0000-0x000f]
[ 0.229219] pnp 00:02: [io 0x0081-0x0083]
[ 0.229221] pnp 00:02: [io 0x0087]
[ 0.229223] pnp 00:02: [io 0x0089-0x008b]
[ 0.229225] pnp 00:02: [io 0x008f]
[ 0.229227] pnp 00:02: [io 0x00c0-0x00df]
[ 0.229261] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.229275] pnp 00:03: [io 0x0070-0x0071]
[ 0.229288] pnp 00:03: [irq 8]
[ 0.229324] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.229340] pnp 00:04: [io 0x0061]
[ 0.229370] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.229382] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.229389] pnp 00:05: [irq 13]
[ 0.229426] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.230136] pnp 00:06: [io 0x0378-0x037f]
[ 0.230139] pnp 00:06: [io 0x0778-0x077f]
[ 0.230148] pnp 00:06: [irq 7]
[ 0.230150] pnp 00:06: [dma 3]
[ 0.230334] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.230443] pnp 00:07: [io 0x0010-0x001f]
[ 0.230447] pnp 00:07: [io 0x0022-0x003f]
[ 0.230449] pnp 00:07: [io 0x0044-0x005f]
[ 0.230451] pnp 00:07: [io 0x0062-0x0063]
[ 0.230457] pnp 00:07: [io 0x0065-0x006f]
[ 0.230459] pnp 00:07: [io 0x0072-0x007f]
[ 0.230461] pnp 00:07: [io 0x0080]
[ 0.230463] pnp 00:07: [io 0x0084-0x0086]
[ 0.230465] pnp 00:07: [io 0x0088]
[ 0.230467] pnp 00:07: [io 0x008c-0x008e]
[ 0.230469] pnp 00:07: [io 0x0090-0x009f]
[ 0.230471] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.230474] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.230476] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.230478] pnp 00:07: [io 0x0800-0x087f]
[ 0.230480] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.230483] pnp 00:07: [io 0x0480-0x04bf]
[ 0.230485] pnp 00:07: [io 0x0900-0x090f]
[ 0.230487] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.230489] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
[ 0.230586] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.230589] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.230593] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.230596] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.230600] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.230603] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.230607] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230711] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.230714] pnp 00:08: [mem 0xfff80000-0xffffffff]
[ 0.230753] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.230808] pnp 00:09: [mem 0xffc00000-0xfff7ffff]
[ 0.230877] system 00:09: [mem 0xffc00000-0xfff7ffff] has been reserved
[ 0.230882] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230949] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.230952] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.231017] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.231021] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.231025] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231071] pnp 00:0b: [io 0x0060]
[ 0.231073] pnp 00:0b: [io 0x0064]
[ 0.231082] pnp 00:0b: [irq 1]
[ 0.231122] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.231436] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.231445] pnp 00:0c: [irq 4]
[ 0.231447] pnp 00:0c: [dma 0 disabled]
[ 0.231533] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.231644] pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
[ 0.231647] pnp 00:0d: [io 0x0280-0x028f]
[ 0.231649] pnp 00:0d: [io 0x0290-0x029f]
[ 0.231719] system 00:0d: [io 0x0280-0x028f] has been reserved
[ 0.231723] system 00:0d: [io 0x0290-0x029f] has been reserved
[ 0.231727] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231784] pnp 00:0e: [mem 0xf0000000-0xf3ffffff]
[ 0.231853] system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.231858] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232083] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.232091] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.232094] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.232096] pnp 00:0f: [mem 0x00100000-0x3fffffff]
[ 0.232099] pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.232184] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.232188] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.232192] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.232195] system 00:0f: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.232199] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.232369] pnp: PnP ACPI: found 16 devices
[ 0.232371] ACPI: ACPI bus type pnp unregistered
[ 0.239369] Switching to clocksource acpi_pm
[ 0.239448] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.239453] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40200000-0x405fffff]
[ 0.239457] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.239461] pci 0000:00:01.0: PCI bridge to [bus 04-04]
[ 0.239464] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.239469] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.239473] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
[ 0.239479] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.239482] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.239487] pci 0000:00:1c.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.239492] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.239498] pci 0000:00:1c.2: PCI bridge to [bus 01-01]
[ 0.239501] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.239507] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x405fffff]
[ 0.239511] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xddffffff 64bit pref]
[ 0.239518] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.239520] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.239525] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.239529] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.239557] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.239561] pci 0000:00:01.0: setting latency timer to 64
[ 0.239568] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.239575] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.239580] pci 0000:00:1c.0: setting latency timer to 64
[ 0.239590] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.239594] pci 0000:00:1c.2: setting latency timer to 64
[ 0.239601] pci 0000:00:1e.0: setting latency timer to 64
[ 0.239605] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.239608] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.239611] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.239614] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.239616] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffffffff]
[ 0.239619] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.239621] pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfebfffff]
[ 0.239624] pci_bus 0000:04: resource 2 [mem 0xde000000-0xefffffff 64bit pref]
[ 0.239627] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.239630] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.239632] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.239635] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.239638] pci_bus 0000:01: resource 1 [mem 0x40200000-0x405fffff]
[ 0.239641] pci_bus 0000:01: resource 2 [mem 0xddf00000-0xddffffff 64bit pref]
[ 0.239643] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.239646] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.239648] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.239651] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.239654] pci_bus 0000:03: resource 8 [mem 0x40000000-0xffffffff]
[ 0.239697] NET: Registered protocol family 2
[ 0.239794] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.239794] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.239794] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.239794] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.239794] TCP reno registered
[ 0.239794] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.239794] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.239794] NET: Registered protocol family 1
[ 0.239794] pci 0000:04:00.0: Boot video device
[ 0.239794] PCI: CLS 32 bytes, default 64
[ 0.239794] audit: initializing netlink socket (disabled)
[ 0.239794] type=2000 audit(1355816240.230:1): initialized
[ 0.250111] Trying to unpack rootfs image as initramfs...
[ 0.270542] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.272582] VFS: Disk quotas dquot_6.5.2
[ 0.272653] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.273420] fuse init (API version 7.16)
[ 0.273550] msgmni has been set to 1963
[ 0.280552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.280596] io scheduler noop registered
[ 0.280598] io scheduler deadline registered
[ 0.280653] io scheduler cfq registered (default)
[ 0.280797] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.280834] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.280918] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.280958] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.281061] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.281100] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.281235] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.281239] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.281241] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
[ 0.281245] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.281268] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.281270] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.281273] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 0.281275] pci 0000:02:00.2: Signaling PME through PCIe PME interrupt
[ 0.281277] pci 0000:02:00.3: Signaling PME through PCIe PME interrupt
[ 0.281280] pci 0000:02:00.4: Signaling PME through PCIe PME interrupt
[ 0.281282] pci 0000:02:00.5: Signaling PME through PCIe PME interrupt
[ 0.281284] pci 0000:02:00.6: Signaling PME through PCIe PME interrupt
[ 0.281286] pci 0000:02:00.7: Signaling PME through PCIe PME interrupt
[ 0.281291] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.281310] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.281313] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.281317] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.281337] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.281384] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 1849 ss_did 283f
[ 0.281407] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.281419] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 1849 ss_did 2843
[ 0.281445] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.281453] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.281505] intel_idle: MWAIT substates: 0x220
[ 0.281507] intel_idle: does not run on family 6 model 22
[ 0.281613] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.281619] ACPI: Power Button [PWRB]
[ 0.281677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.281681] ACPI: Power Button [PWRF]
[ 0.281865] ACPI: acpi_idle registered with cpuidle
[ 0.284027] ERST: Table is not found!
[ 0.284127] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.304668] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.351946] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.370490] Linux agpgart interface v0.103
[ 0.371962] brd: module loaded
[ 0.372629] loop: module loaded
[ 0.372765] i2c-core: driver [adp5520] using legacy suspend method
[ 0.372768] i2c-core: driver [adp5520] using legacy resume method
[ 0.372897] ata_piix 0000:00:1f.2: version 2.13
[ 0.372926] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.372932] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.530321] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.540227] scsi0 : ata_piix
[ 0.540403] scsi1 : ata_piix
[ 0.541817] ata1: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 19
[ 0.541823] ata2: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 19
[ 0.541903] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.541908] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.541954] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.542242] scsi2 : ata_piix
[ 0.542370] scsi3 : ata_piix
[ 0.543635] ata3: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 19
[ 0.543641] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 19
[ 0.544030] Fixed MDIO Bus: probed
[ 0.544069] PPP generic driver version 2.4.2
[ 0.544145] tun: Universal TUN/TAP device driver, 1.6
[ 0.544147] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.544276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.544304] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.544327] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.544331] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.544380] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.544419] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.548311] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.548333] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfceffc00
[ 0.580059] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.580237] hub 1-0:1.0: USB hub found
[ 0.580244] hub 1-0:1.0: 4 ports detected
[ 0.580343] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.580367] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.580371] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.580446] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.580486] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.584355] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.584378] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfceff800
[ 0.600160] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.600363] hub 2-0:1.0: USB hub found
[ 0.600369] hub 2-0:1.0: 6 ports detected
[ 0.600462] ehci_hcd 0000:02:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.600487] ehci_hcd 0000:02:00.1: setting latency timer to 64
[ 0.600492] ehci_hcd 0000:02:00.1: EHCI Host Controller
[ 0.600565] ehci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 3
[ 0.630248] ehci_hcd 0000:02:00.1: irq 16, io mem 0xfcff9000
[ 0.650165] ehci_hcd 0000:02:00.1: USB 2.0 started, EHCI 1.00
[ 0.650359] hub 3-0:1.0: USB hub found
[ 0.650365] hub 3-0:1.0: 1 port detected
[ 0.650450] ehci_hcd 0000:02:00.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.650476] ehci_hcd 0000:02:00.3: setting latency timer to 64
[ 0.650481] ehci_hcd 0000:02:00.3: EHCI Host Controller
[ 0.650541] ehci_hcd 0000:02:00.3: new USB bus registered, assigned bus number 4
[ 0.664909] Freeing initrd memory: 14108k freed
[ 0.680117] ehci_hcd 0000:02:00.3: irq 17, io mem 0xfcffb000
[ 0.700036] ehci_hcd 0000:02:00.3: USB 2.0 started, EHCI 1.00
[ 0.700232] hub 4-0:1.0: USB hub found
[ 0.700239] hub 4-0:1.0: 1 port detected
[ 0.700333] ehci_hcd 0000:02:00.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.700356] ehci_hcd 0000:02:00.5: setting latency timer to 64
[ 0.700361] ehci_hcd 0000:02:00.5: EHCI Host Controller
[ 0.700423] ehci_hcd 0000:02:00.5: new USB bus registered, assigned bus number 5
[ 0.730029] ehci_hcd 0000:02:00.5: irq 18, io mem 0xfcffd000
[ 0.750038] ehci_hcd 0000:02:00.5: USB 2.0 started, EHCI 1.00
[ 0.750180] hub 5-0:1.0: USB hub found
[ 0.750186] hub 5-0:1.0: 1 port detected
[ 0.750264] ehci_hcd 0000:02:00.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.750282] ehci_hcd 0000:02:00.7: setting latency timer to 64
[ 0.750286] ehci_hcd 0000:02:00.7: EHCI Host Controller
[ 0.750345] ehci_hcd 0000:02:00.7: new USB bus registered, assigned bus number 6
[ 0.780042] ehci_hcd 0000:02:00.7: irq 19, io mem 0xfcfff000
[ 0.800050] ehci_hcd 0000:02:00.7: USB 2.0 started, EHCI 1.00
[ 0.800192] hub 6-0:1.0: USB hub found
[ 0.800198] hub 6-0:1.0: 1 port detected
[ 0.800277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.800300] ohci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.800319] ohci_hcd 0000:02:00.0: setting latency timer to 64
[ 0.800324] ohci_hcd 0000:02:00.0: OHCI Host Controller
[ 0.800382] ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 7
[ 0.800406] ohci_hcd 0000:02:00.0: irq 16, io mem 0xfcff8000
[ 0.864239] hub 7-0:1.0: USB hub found
[ 0.864248] hub 7-0:1.0: 1 port detected
[ 0.864329] ohci_hcd 0000:02:00.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.864348] ohci_hcd 0000:02:00.2: setting latency timer to 64
[ 0.864353] ohci_hcd 0000:02:00.2: OHCI Host Controller
[ 0.864417] ohci_hcd 0000:02:00.2: new USB bus registered, assigned bus number 8
[ 0.864440] ohci_hcd 0000:02:00.2: irq 17, io mem 0xfcffa000
[ 0.910772] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.924194] hub 8-0:1.0: USB hub found
[ 0.924203] hub 8-0:1.0: 1 port detected
[ 0.924286] ohci_hcd 0000:02:00.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.924306] ohci_hcd 0000:02:00.4: setting latency timer to 64
[ 0.924311] ohci_hcd 0000:02:00.4: OHCI Host Controller
[ 0.924370] ohci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 9
[ 0.924393] ohci_hcd 0000:02:00.4: irq 18, io mem 0xfcffc000
[ 0.984171] hub 9-0:1.0: USB hub found
[ 0.984180] hub 9-0:1.0: 1 port detected
[ 0.984260] ohci_hcd 0000:02:00.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.984280] ohci_hcd 0000:02:00.6: setting latency timer to 64
[ 0.984284] ohci_hcd 0000:02:00.6: OHCI Host Controller
[ 0.984347] ohci_hcd 0000:02:00.6: new USB bus registered, assigned bus number 10
[ 0.984370] ohci_hcd 0000:02:00.6: irq 19, io mem 0xfcffe000
[ 1.044196] hub 10-0:1.0: USB hub found
[ 1.044205] hub 10-0:1.0: 1 port detected
[ 1.044283] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.044373] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.044382] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.044386] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.044455] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 11
[ 1.044485] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
[ 1.044639] hub 11-0:1.0: USB hub found
[ 1.044645] hub 11-0:1.0: 2 ports detected
[ 1.044734] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.044743] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.044747] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.044822] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 12
[ 1.044862] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000cc00
[ 1.045014] hub 12-0:1.0: USB hub found
[ 1.045020] hub 12-0:1.0: 2 ports detected
[ 1.045097] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.045105] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.045109] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.045171] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 13
[ 1.045200] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 1.045348] hub 13-0:1.0: USB hub found
[ 1.045354] hub 13-0:1.0: 2 ports detected
[ 1.045430] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.045438] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.045441] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.045504] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 14
[ 1.045533] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[ 1.045687] hub 14-0:1.0: USB hub found
[ 1.045693] hub 14-0:1.0: 2 ports detected
[ 1.045767] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.045774] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.045778] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.045842] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 15
[ 1.045871] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[ 1.046025] hub 15-0:1.0: USB hub found
[ 1.046033] hub 15-0:1.0: 2 ports detected
[ 1.046179] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.046181] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.046684] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.046850] mousedev: PS/2 mouse device common for all mice
[ 1.047032] rtc_cmos 00:03: RTC can wake from S4
[ 1.047094] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.047120] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.047262] device-mapper: uevent: version 1.0.3
[ 1.047366] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.047452] device-mapper: multipath: version 1.2.0 loaded
[ 1.047455] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.047596] cpuidle: using governor ladder
[ 1.047599] cpuidle: using governor menu
[ 1.047846] TCP cubic registered
[ 1.048000] NET: Registered protocol family 10
[ 1.048544] NET: Registered protocol family 17
[ 1.048574] Registering the dns_resolver key type
[ 1.048773] registered taskstats version 1
[ 1.049217] Magic number: 8:710:622
[ 1.049340] rtc_cmos 00:03: setting system clock to 2012-12-18 07:37:21 UTC (1355816241)
[ 1.049344] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.049345] EDD information not available.
[ 1.070056] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.091410] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 1.091414] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.110428] ata3.00: configured for UDMA/133
[ 1.150022] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 1.250023] Refined TSC clocksource calibration: 1795.029 MHz.
[ 1.250029] Switching to clocksource tsc
[ 1.400060] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.400072] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 1.400189] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.400202] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 1.400212] ata2.01: link offline, clearing class 3 to NONE
[ 1.420274] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX01, max UDMA/100
[ 1.420413] ata1.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 1.420416] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.440433] ata1.00: configured for UDMA/133
[ 1.440567] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00M 51.0 PQ: 0 ANSI: 5
[ 1.440762] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.440887] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.440891] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.440961] sd 0:0:0:0: [sda] Write Protect is off
[ 1.440965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.440996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.460162] ata2.00: configured for UDMA/100
[ 1.466481] sda: sda1 sda2 < sda5 >
[ 1.466836] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.468631] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX01 PQ: 0 ANSI: 5
[ 1.477175] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.477179] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.477311] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.477404] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.477566] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 1.477735] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.477843] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.477846] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.477915] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.477919] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.477950] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.494388] sdb: sdb1
[ 1.494658] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.496810] Freeing unused kernel memory: 960k freed
[ 1.497271] Write protecting the kernel read-only data: 10240k
[ 1.498095] Freeing unused kernel memory: 156k freed
[ 1.504391] Freeing unused kernel memory: 1432k freed
[ 1.532951] <30>udev[67]: starting version 167
[ 1.578264] vesafb: framebuffer at 0xdf000000, mapped to 0xffffc90004580000, using 3072k, total 3072k
[ 1.578268] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.578270] vesafb: scrolling: redraw
[ 1.578273] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.578416] Console: switching to colour frame buffer device 128x48
[ 1.578439] fb0: VESA VGA frame buffer device
[ 1.580099] usb 4-1: new high speed USB device using ehci_hcd and address 2
[ 1.796245] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.796270] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.796312] r8169 0000:01:00.0: setting latency timer to 64
[ 1.796371] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 1.796865] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc900001a8000, bc:5f:f4:0c:76:ed, XID 081000c0 IRQ 43
[ 1.850039] usb 14-1: new low speed USB device using uhci_hcd and address 2
[ 2.183552] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.234999] input: 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb14/14-1/14-1:1.0/input/input2
[ 2.235124] generic-usb 0003:04D9:2519.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Wireless Touchpad Keyboard] on usb-0000:00:1d.1-1/input0
[ 2.305247] input: 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb14/14-1/14-1:1.1/input/input3
[ 2.305404] generic-usb 0003:04D9:2519.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G Wireless Touchpad Keyboard] on usb-0000:00:1d.1-1/input1
[ 2.305427] usbcore: registered new interface driver usbhid
[ 2.305429] usbhid: USB HID core driver
[ 11.310351] <30>udev[304]: starting version 167
[ 11.390978] lp: driver loaded but no devices found
[ 11.442895] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 11.852206] EXT3-fs: barriers not enabled
[ 12.181642] parport_pc 00:06: reported by Plug and Play ACPI
[ 12.181697] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 12.262546] kjournald starting. Commit interval 5 seconds
[ 12.263065] EXT3-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
[ 12.263657] EXT3-fs (sdb1): using internal journal
[ 12.263665] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 12.353080] lp0: using parport0 (interrupt-driven).
[ 12.417605] nvidia: module license 'NVIDIA' taints kernel.
[ 12.417611] Disabling lock debugging due to kernel taint
[ 12.524868] lirc_dev: IR Remote Control driver registered, major 250
[ 12.528104] RPC: Registered udp transport module.
[ 12.528108] RPC: Registered tcp transport module.
[ 12.528110] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.581824] lirc_serial: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.896349] FS-Cache: Loaded
[ 12.940947] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.940961] nvidia 0000:04:00.0: setting latency timer to 64
[ 12.940967] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.960049] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012
[ 13.167078] FS-Cache: Netfs 'nfs' registered for caching
[ 13.217410] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.276816] WARNING: You are using an experimental version of the media stack.
[ 13.276819] As the driver is backported to an older kernel, it doesn't offer
[ 13.276820] enough quality for its usage in production.
[ 13.276821] Use it with care.
[ 13.276822] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 13.276823] 875e2e3edf48a206c64195666cf408dd3d119137 [media] omap3isp: Mark next captured frame as faulty when an SBL overflow occurs
[ 13.276825] c3cd257402fdcd650816ec25b83480a24912430a [media] omap3isp: video: Don't WARN() on unknown pixel formats
[ 13.276827] 22db44cb9cd67d56b02b2b5dceb10d3d1361b28b [media] as3645a: Add driver for LED flash controller
[ 13.295189] IR NEC protocol handler initialized
[ 13.302176] IR RC5(x) protocol handler initialized
[ 13.321641] IR RC6 protocol handler initialized
[ 13.325647] IR JVC protocol handler initialized
[ 13.732977] IR Sony protocol handler initialized
[ 13.733324] WARNING: You are using an experimental version of the media stack.
[ 13.733327] As the driver is backported to an older kernel, it doesn't offer
[ 13.733328] enough quality for its usage in production.
[ 13.733329] Use it with care.
[ 13.733330] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 13.733331] 875e2e3edf48a206c64195666cf408dd3d119137 [media] omap3isp: Mark next captured frame as faulty when an SBL overflow occurs
[ 13.733333] c3cd257402fdcd650816ec25b83480a24912430a [media] omap3isp: video: Don't WARN() on unknown pixel formats
[ 13.733334] 22db44cb9cd67d56b02b2b5dceb10d3d1361b28b [media] as3645a: Add driver for LED flash controller
[ 13.745162] IR MCE Keyboard/mouse protocol handler initialized
[ 13.755214] IR LIRC bridge handler initialized
[ 13.850207] lirc_serial: auto-detected active low receiver
[ 13.856700] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0
[ 13.863108] input: lircd as /devices/virtual/input/input4
[ 13.897296] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to load a firmware
[ 14.157630] r8169 0000:01:00.0: eth0: link down
[ 14.157639] r8169 0000:01:00.0: eth0: link down
[ 14.158062] input: eventlircd as /devices/virtual/input/input5
[ 14.159140] Adding 1044476k swap on /dev/mapper/vdr-swap_1. Priority:-1 extents:1 across:1044476k
[ 14.190062] ppdev: user-space parallel port driver
[ 14.225034] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.300165] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 14.300170] dw2102: start downloading DW210X firmware
[ 14.546348] usb 3-1: USB disconnect, address 2
[ 14.881055] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[ 14.881414] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 14.881443] DVB: registering new adapter (TeVii S480.1 USB)
[ 14.881675] dvb-usb: MAC address: 50:50:50:50:50:50
[ 14.972513] Invalid probe, probably not a DS3000
[ 14.972890] dvb-usb: no frontend was attached by 'TeVii S480.1 USB'
[ 14.978031] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/usb3/3-1/input/input6
[ 14.978710] dvb-usb: schedule remote query interval to 150 msecs.
[ 14.978717] dvb-usb: TeVii S480.1 USB successfully initialized and connected.
[ 14.979136] dvb-usb: TeVii S480.1 USB successfully deinitialized and disconnected.
[ 14.982812] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to load a firmware
[ 15.253182] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 15.253187] dw2102: start downloading DW210X firmware
[ 15.371651] usb 4-1: USB disconnect, address 2
[ 15.473231] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[ 15.473636] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 15.473665] DVB: registering new adapter (TeVii S480.2 USB)
[ 15.473897] dvb-usb: MAC address: 28:28:28:28:28:28
[ 15.481731] Invalid probe, probably not a DS3000
[ 15.482108] dvb-usb: no frontend was attached by 'TeVii S480.2 USB'
[ 15.485531] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.3/usb4/4-1/input/input7
[ 15.486024] dvb-usb: schedule remote query interval to 150 msecs.
[ 15.486032] dvb-usb: TeVii S480.2 USB successfully initialized and connected.
[ 15.486461] dvb-usb: TeVii S480.2 USB successfully deinitialized and disconnected.
[ 15.488958] usbcore: registered new interface driver dw2102
[ 15.775683] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.775741] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 15.775771] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.940435] HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.940440] hda_intel: Disable MSI for Nvidia chipset
[ 15.940474] HDA Intel 0000:04:00.1: setting latency timer to 64
[ 16.143066] svc: failed to register lockdv1 RPC service (errno 97).
[ 16.145957] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 16.149644] NFSD: starting 90-second grace period
[ 16.340088] usb 3-1: new high speed USB device using ehci_hcd and address 3
[ 16.342485] r8169 0000:01:00.0: eth0: link up
[ 16.342627] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.491307] usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[ 16.493488] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 16.503590] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 16.503593] dw2102: start downloading DW210X firmware
[ 16.660084] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 16.660169] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 16.660868] DVB: registering new adapter (TeVii S660 USB)
[ 17.038758] dvb-usb: MAC address: 00:18:bd:5a:d9:c8
[ 17.042386] DS3000 chip version: 0.192 attached.
[ 17.042758] dw2102: Attached ds3000+ds2020!
[ 17.042761]
[ 17.042767] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[ 17.043700] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/usb3/3-1/input/input8
[ 17.043785] dvb-usb: schedule remote query interval to 150 msecs.
[ 17.043790] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 17.320077] usb 4-1: new high speed USB device using ehci_hcd and address 3
[ 17.471212] usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[ 17.473297] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 17.485486] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 17.485490] dw2102: start downloading DW210X firmware
[ 17.640091] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 17.640170] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 17.640885] DVB: registering new adapter (TeVii S660 USB)
[ 17.871063] dvb-usb: MAC address: 00:18:bd:5a:d9:c9
[ 17.875068] DS3000 chip version: 0.192 attached.
[ 17.875434] dw2102: Attached ds3000+ds2020!
[ 17.875437]
[ 17.875442] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
[ 17.876380] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.3/usb4/4-1/input/input9
[ 17.876457] dvb-usb: schedule remote query interval to 150 msecs.
[ 17.876462] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 19.434690] NVRM: Your system is not currently configured to drive a VGA console
[ 19.434695] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 19.434698] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 19.434701] NVRM: drivers including, but not limited to, vesafb, may result in
[ 19.434703] NVRM: corruption and stability problems, and is not supported.
[ 19.699697] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
[ 19.736026] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1
[ 21.690061] HDMI: detected monitor SAMSUNG
[ 21.690064] at connection type HDMI
[ 21.690068] HDMI: available speakers: FL/FR
[ 21.690073] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
[ 23.630150] HDMI: detected monitor SAMSUNG
[ 23.630153] at connection type HDMI
[ 23.630156] HDMI: available speakers: FL/FR
[ 23.630161] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
[ 24.276339] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 24.314437] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[ 24.914010] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 24.918131] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[ 26.750021] eth0: no IPv6 routers present
[ 30.190691] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
Danke schon mal
Zu diesen Leuten gehöre ich z.B. nicht, möchte meine vorhandene Zeit aber gerne in andere Baustellen investieren (denn auch davon habe ich nur begrenzt viel), weshalb ich dann einfach Karten nehme, die vernünftig unterstützt werden, auch wenn sie ein bisschen teurer sind.