[0.5] Tevii S470 kommt nach S3 nicht wieder hoch

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-57-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #87-Ubuntu SMP Tue Nov 12 21:35:10 UTC 2013 (Ubuntu 3.2.0-57.87-generic 3.2.52)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-57-generic root=UUID=bec36b3d-eeb7-4e1c-a98d-bbb114228fd3 ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff90000 (usable)
[ 0.000000] BIOS-e820: 000000005ff90000 - 000000005ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005ff9e000 - 000000005ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005ffe0000 - 000000005ffee000 (reserved)
[ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M3N78-VM, BIOS 1602 04/13/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x5ff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000005ff90000
[ 0.000000] 0000000000 - 0040000000 page 1G
[ 0.000000] 0040000000 - 005fe00000 page 2M
[ 0.000000] 005fe00000 - 005ff90000 page 4k
[ 0.000000] kernel direct mapping tables up to 5ff90000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 363fe000 - 371f7000
[ 0.000000] ACPI: RSDP 00000000000fb570 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000005ff90000 00044 (v01 041310 RSDT1659 20100413 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000005ff90200 00084 (v01 041310 FACP1659 20100413 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000005ff90460 0AF17 (v01 A1041 A1041000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000005ff9e000 00040
[ 0.000000] ACPI: APIC 000000005ff90390 00090 (v01 041310 APIC1659 20100413 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000005ff90420 0003C (v01 041310 OEMMCFG 20100413 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000005ff9e040 00072 (v01 041310 OEMB1659 20100413 MSFT 00000097)
[ 0.000000] ACPI: SRAT 000000005ff9b380 000A0 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: INFO 000000005ff9e0c0 00124 (v01 041310 AMDINFO 20100413 MSFT 00000097)
[ 0.000000] ACPI: NVHD 000000005ff9e1f0 00284 (v01 041310 NVHDCP 20100413 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000005ff9b420 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,5ff90000) -> [0,5ff90000)
[ 0.000000] Initmem setup node 0 0000000000000000-000000005ff90000
[ 0.000000] NODE_DATA [000000005ff8b000 - 000000005ff8ffff]
[ 0.000000] [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005de00000-ffff88005f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0005ff90
[ 0.000000] On node 0 totalpages: 392990
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6079 pages used for memmap
[ 0.000000] DMA32 zone: 382929 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005fc00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386842
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-57-generic root=UUID=bec36b3d-eeb7-4e1c-a98d-bbb114228fd3 ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ fffe000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1516572k/1572416k available (6586k kernel code, 456k absent, 55388k reserved, 6619k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2814.209 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.41 BogoMIPS (lpj=11256836)
[ 0.008008] pid_max: default: 32768 minimum: 301
[ 0.008029] Security Framework initialized
[ 0.008045] AppArmor: AppArmor initialized
[ 0.008046] Yama: becoming mindful.
[ 0.008221] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012507] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012826] Mount-cache hash table entries: 256
[ 0.012944] Initializing cgroup subsys cpuacct
[ 0.012949] Initializing cgroup subsys memory
[ 0.012956] Initializing cgroup subsys devices
[ 0.012958] Initializing cgroup subsys freezer
[ 0.012960] Initializing cgroup subsys blkio
[ 0.012966] Initializing cgroup subsys perf_event
[ 0.012992] tseg: 0000000000
[ 0.013004] CPU: Physical Processor ID: 0
[ 0.013005] CPU: Processor Core ID: 0
[ 0.013008] mce: CPU supports 6 MCE banks
[ 0.014267] ACPI: Core revision 20110623
[ 0.018282] ftrace: allocating 26597 entries in 105 pages
[ 0.020631] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060557] CPU0: AMD Athlon(tm) II X2 240 Processor stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 99000
[ 0.152027] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152045] Brought up 2 CPUs
[ 0.152047] Total of 2 processors activated (11256.77 BogoMIPS).
[ 0.152620] devtmpfs: initialized
[ 0.152914] EVM: security.selinux
[ 0.152915] EVM: security.SMACK64
[ 0.152916] EVM: security.capability
[ 0.153001] PM: Registering ACPI NVS region at 5ff9e000 (270336 bytes)
[ 0.153001] print_constraints: dummy:
[ 0.153001] RTC time: 15:28:46, date: 12/27/13
[ 0.153001] NET: Registered protocol family 16
[ 0.153001] node 0 link 0: io port [5000, ffffff]
[ 0.153001] node 0 link 0: io port [1000, 1fff]
[ 0.153001] TOM: 0000000080000000 aka 2048M
[ 0.153001] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.153001] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.153001] node 0 link 0: mmio [a0000, bffff]
[ 0.153001] node 0 link 0: mmio [80000000, fe0bffff] ==> [80000000, dfffffff] and [f0000000, fe0bffff]
[ 0.153001] bus: [00, 07] on node 0 link 0
[ 0.153001] bus: 00 index 0 [io 0x2000-0xffff]
[ 0.153001] bus: 00 index 1 [io 0x0000-0x1fff]
[ 0.153001] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.153001] bus: 00 index 3 [mem 0x80000000-0xdfffffff]
[ 0.153001] bus: 00 index 4 [mem 0xf0000000-0xfcffffffff]
[ 0.153001] Trying to unpack rootfs image as initramfs...
[ 0.153001] Extended Config Space enabled on 1 nodes
[ 0.153001] ACPI: bus type pci registered
[ 0.153001] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.153001] PCI: not using MMCONFIG
[ 0.153001] PCI: Using configuration type 1 for base access
[ 0.153001] PCI: Using configuration type 1 for extended access
[ 0.153005] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.153007] mtrr: probably your BIOS does not setup all CPUs.
[ 0.153008] mtrr: corrected configuration.
[ 0.153699] bio: create slab <bio-0> at 0
[ 0.153765] ACPI: Added _OSI(Module Device)
[ 0.153767] ACPI: Added _OSI(Processor Device)
[ 0.153768] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153770] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.156867] ACPI: EC: Look up EC in DSDT
[ 0.158390] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.161467] ACPI: Interpreter enabled
[ 0.161471] ACPI: (supports S0 S3 S4 S5)
[ 0.161485] ACPI: Using IOAPIC for interrupt routing
[ 0.161499] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.162528] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.182658] ACPI: No dock devices found.
[ 0.182660] HEST: Table not found.
[ 0.182664] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.182790] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.182929] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.182931] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.182933] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.182935] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.182937] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff]
[ 0.182939] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff]
[ 0.182975] pci 0000:00:00.0: [10de:0754] type 0 class 0x000500
[ 0.183234] pci 0000:00:01.0: [10de:075c] type 0 class 0x000601
[ 0.183241] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
[ 0.183276] pci 0000:00:01.1: [10de:0752] type 0 class 0x000c05
[ 0.183287] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f]
[ 0.183303] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
[ 0.183309] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
[ 0.183338] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.183343] pci 0000:00:01.1: PME# disabled
[ 0.183356] pci 0000:00:01.2: [10de:0751] type 0 class 0x000500
[ 0.183402] pci 0000:00:01.3: [10de:0753] type 0 class 0x000b40
[ 0.183419] pci 0000:00:01.3: reg 10: [mem 0xfce80000-0xfcefffff]
[ 0.183528] pci 0000:00:01.4: [10de:0568] type 0 class 0x000500
[ 0.183597] pci 0000:00:02.0: [10de:077b] type 0 class 0x000c03
[ 0.183606] pci 0000:00:02.0: reg 10: [mem 0xfce7e000-0xfce7efff]
[ 0.183641] pci 0000:00:02.0: supports D1 D2
[ 0.183643] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183646] pci 0000:00:02.0: PME# disabled
[ 0.183657] pci 0000:00:02.1: [10de:077c] type 0 class 0x000c03
[ 0.183667] pci 0000:00:02.1: reg 10: [mem 0xfce7fc00-0xfce7fcff]
[ 0.183710] pci 0000:00:02.1: supports D1 D2
[ 0.183711] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183714] pci 0000:00:02.1: PME# disabled
[ 0.183731] pci 0000:00:04.0: [10de:077d] type 0 class 0x000c03
[ 0.183740] pci 0000:00:04.0: reg 10: [mem 0xfce7d000-0xfce7dfff]
[ 0.183776] pci 0000:00:04.0: supports D1 D2
[ 0.183777] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183780] pci 0000:00:04.0: PME# disabled
[ 0.183791] pci 0000:00:04.1: [10de:077e] type 0 class 0x000c03
[ 0.183801] pci 0000:00:04.1: reg 10: [mem 0xfce7f800-0xfce7f8ff]
[ 0.183844] pci 0000:00:04.1: supports D1 D2
[ 0.183846] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183848] pci 0000:00:04.1: PME# disabled
[ 0.183869] pci 0000:00:07.0: [10de:0774] type 0 class 0x000403
[ 0.183879] pci 0000:00:07.0: reg 10: [mem 0xfce78000-0xfce7bfff]
[ 0.183923] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.183926] pci 0000:00:07.0: PME# disabled
[ 0.183939] pci 0000:00:08.0: [10de:075a] type 1 class 0x000604
[ 0.183979] pci 0000:00:09.0: [10de:0ad0] type 0 class 0x000101
[ 0.183988] pci 0000:00:09.0: reg 10: [io 0xd480-0xd487]
[ 0.183992] pci 0000:00:09.0: reg 14: [io 0xd400-0xd403]
[ 0.183997] pci 0000:00:09.0: reg 18: [io 0xd080-0xd087]
[ 0.184019] pci 0000:00:09.0: reg 1c: [io 0xd000-0xd003]
[ 0.184023] pci 0000:00:09.0: reg 20: [io 0xcc00-0xcc0f]
[ 0.184027] pci 0000:00:09.0: reg 24: [mem 0xfce76000-0xfce77fff]
[ 0.184060] pci 0000:00:0a.0: [10de:0760] type 0 class 0x000200
[ 0.184070] pci 0000:00:0a.0: reg 10: [mem 0xfce7c000-0xfce7cfff]
[ 0.184075] pci 0000:00:0a.0: reg 14: [io 0xc880-0xc887]
[ 0.184079] pci 0000:00:0a.0: reg 18: [mem 0xfce7f400-0xfce7f4ff]
[ 0.184084] pci 0000:00:0a.0: reg 1c: [mem 0xfce7f000-0xfce7f00f]
[ 0.184115] pci 0000:00:0a.0: supports D1 D2
[ 0.184116] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184120] pci 0000:00:0a.0: PME# disabled
[ 0.184132] pci 0000:00:0b.0: [10de:0569] type 1 class 0x000604
[ 0.184158] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184160] pci 0000:00:0b.0: PME# disabled
[ 0.184215] pci 0000:00:10.0: [10de:0778] type 1 class 0x000604
[ 0.184441] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184448] pci 0000:00:10.0: PME# disabled
[ 0.184534] pci 0000:00:12.0: [10de:075b] type 1 class 0x000604
[ 0.184759] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184767] pci 0000:00:12.0: PME# disabled
[ 0.184812] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.184827] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.184840] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.184852] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.184867] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.184909] pci 0000:01:06.0: [1131:7146] type 0 class 0x000480
[ 0.184919] pci 0000:01:06.0: reg 10: [mem 0xfcfffc00-0xfcfffdff]
[ 0.184984] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.184988] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.184991] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.184993] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.184996] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.184998] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.185000] pci 0000:00:08.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[ 0.185002] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode)
[ 0.185023] pci 0000:02:00.0: [10de:0849] type 0 class 0x000300
[ 0.185030] pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.185037] pci 0000:02:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.185043] pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.185047] pci 0000:02:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.185051] pci 0000:02:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.185080] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.185083] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.185085] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 0.185089] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.185239] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[ 0.185430] pci 0000:04:00.0: [14f1:8852] type 0 class 0x000400
[ 0.185451] pci 0000:04:00.0: reg 10: [mem 0xfea00000-0xfebfffff 64bit]
[ 0.185561] pci 0000:04:00.0: supports D1 D2
[ 0.185562] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.185567] pci 0000:04:00.0: PME# disabled
[ 0.185585] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.185598] pci 0000:00:12.0: PCI bridge to [bus 04-04]
[ 0.185617] pci 0000:00:12.0: bridge window [mem 0xfea00000-0xfebfffff]
[ 0.185658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.185816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.185851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.185876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
[ 0.185899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.185982] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.186124] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.186125] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.192064] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *15
[ 0.192132] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.192198] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.192263] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.192330] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.192394] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.192459] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.192525] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.192590] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.192657] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.192722] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.192787] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.192854] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 0.192918] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.192984] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.193049] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.193114] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
[ 0.193179] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.193244] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.193310] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.193375] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[ 0.193440] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.193505] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.193573] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.193638] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.193703] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.193768] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.193834] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.193899] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.193964] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.194029] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.194095] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.194160] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.194225] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.194290] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.194355] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.194422] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 0.194492] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.194559] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.194633] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.194707] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
[ 0.194774] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *7
[ 0.194840] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *14
[ 0.194906] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.194985] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.195052] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *14
[ 0.195119] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
[ 0.195415] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.195415] vgaarb: loaded
[ 0.195415] vgaarb: bridge control possible 0000:02:00.0
[ 0.195415] i2c-core: driver [aat2870] using legacy suspend method
[ 0.195415] i2c-core: driver [aat2870] using legacy resume method
[ 0.195415] SCSI subsystem initialized
[ 0.204091] libata version 3.00 loaded.
[ 0.204107] usbcore: registered new interface driver usbfs
[ 0.204116] usbcore: registered new interface driver hub
[ 0.204149] usbcore: registered new device driver usb
[ 0.204268] PCI: Using ACPI for IRQ routing
[ 0.210778] PCI: pci_cache_line_size set to 64 bytes
[ 0.210853] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.210857] reserve RAM buffer: 000000005ff90000 - 000000005fffffff
[ 0.210942] NetLabel: Initializing
[ 0.210944] NetLabel: domain hash size = 128
[ 0.210945] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.210953] NetLabel: unlabeled traffic allowed by default
[ 0.216290] AppArmor: AppArmor Filesystem Enabled
[ 0.216321] pnp: PnP ACPI init
[ 0.216339] ACPI: bus type pnp registered
[ 0.216456] pnp 00:00: [bus 00-ff]
[ 0.216458] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.216460] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.216462] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.216464] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.216466] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.216468] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.216470] pnp 00:00: [mem 0xf0000000-0xfed44fff window]
[ 0.216545] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.216567] pnp 00:01: [dma 4]
[ 0.216569] pnp 00:01: [io 0x0000-0x000f]
[ 0.216571] pnp 00:01: [io 0x0081-0x0083]
[ 0.216572] pnp 00:01: [io 0x0087]
[ 0.216574] pnp 00:01: [io 0x0089-0x008b]
[ 0.216575] pnp 00:01: [io 0x008f]
[ 0.216576] pnp 00:01: [io 0x00c0-0x00df]
[ 0.216596] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.216604] pnp 00:02: [io 0x0061]
[ 0.216621] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.216627] pnp 00:03: [io 0x00f0-0x00ff]
[ 0.216640] pnp 00:03: [irq 13]
[ 0.216656] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.217241] pnp 00:04: [mem 0x000d0000-0x000d3fff window]
[ 0.217243] pnp 00:04: [mem 0x000d4000-0x000d7fff window]
[ 0.217245] pnp 00:04: [mem 0x000de000-0x000dffff window]
[ 0.217247] pnp 00:04: [io 0x0010-0x001f]
[ 0.217248] pnp 00:04: [io 0x0022-0x003f]
[ 0.217250] pnp 00:04: [io 0x0044-0x004d]
[ 0.217251] pnp 00:04: [io 0x0050-0x005f]
[ 0.217252] pnp 00:04: [io 0x0062-0x0063]
[ 0.217254] pnp 00:04: [io 0x0065-0x006f]
[ 0.217255] pnp 00:04: [io 0x0072-0x007f]
[ 0.217257] pnp 00:04: [io 0x0080]
[ 0.217258] pnp 00:04: [io 0x0084-0x0086]
[ 0.217259] pnp 00:04: [io 0x0088]
[ 0.217261] pnp 00:04: [io 0x008c-0x008e]
[ 0.217262] pnp 00:04: [io 0x0090-0x009f]
[ 0.217263] pnp 00:04: [io 0x00a2-0x00bf]
[ 0.217265] pnp 00:04: [io 0x00e0-0x00ef]
[ 0.217266] pnp 00:04: [io 0x04d0-0x04d1]
[ 0.217268] pnp 00:04: [io 0x0800-0x080f]
[ 0.217269] pnp 00:04: [io 0x0500-0x057f]
[ 0.217271] pnp 00:04: [io 0x0580-0x05ff]
[ 0.217272] pnp 00:04: [io 0x0800-0x087f]
[ 0.217273] pnp 00:04: [io 0x0880-0x08ff]
[ 0.217275] pnp 00:04: [io 0x0d00-0x0d7f]
[ 0.217276] pnp 00:04: [io 0x0d80-0x0dff]
[ 0.217278] pnp 00:04: [io 0x0900-0x097f]
[ 0.217279] pnp 00:04: [io 0x0980-0x09ff]
[ 0.217281] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.217283] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.217285] pnp 00:04: [mem 0xfed04000-0xfed04fff]
[ 0.217286] pnp 00:04: [mem 0xfee01000-0xfeefffff]
[ 0.217293] pnp 00:04: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.217296] pnp 00:04: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.217356] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.217359] system 00:04: [io 0x0800-0x080f] has been reserved
[ 0.217361] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.217363] system 00:04: [io 0x0580-0x05ff] has been reserved
[ 0.217365] system 00:04: [io 0x0800-0x087f] could not be reserved
[ 0.217367] system 00:04: [io 0x0880-0x08ff] has been reserved
[ 0.217369] system 00:04: [io 0x0d00-0x0d7f] has been reserved
[ 0.217371] system 00:04: [io 0x0d80-0x0dff] has been reserved
[ 0.217374] system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.217376] system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.217379] system 00:04: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.217382] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.217384] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.217387] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217428] pnp 00:05: [io 0x0070-0x0071]
[ 0.217436] pnp 00:05: [irq 8]
[ 0.217457] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.217523] pnp 00:06: [io 0x0060]
[ 0.217525] pnp 00:06: [io 0x0064]
[ 0.217526] pnp 00:06: [mem 0xfec00000-0xfec00fff]
[ 0.217528] pnp 00:06: [mem 0xfee00000-0xfee00fff]
[ 0.217560] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.217562] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.217564] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217691] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.217695] pnp 00:07: [io 0x0230-0x023f]
[ 0.217696] pnp 00:07: [io 0x0290-0x029f]
[ 0.217698] pnp 00:07: [io 0x0a00-0x0a0f]
[ 0.217699] pnp 00:07: [io 0x0a10-0x0a1f]
[ 0.217729] system 00:07: [io 0x0230-0x023f] has been reserved
[ 0.217731] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.217733] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.217735] system 00:07: [io 0x0a10-0x0a1f] has been reserved
[ 0.217738] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218104] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.218112] pnp 00:08: [irq 4]
[ 0.218114] pnp 00:08: [dma 0 disabled]
[ 0.218164] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.218203] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.218234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.218237] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.218347] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.218349] pnp 00:0a: [mem 0x000c0000-0x000cffff]
[ 0.218350] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.218352] pnp 00:0a: [mem 0x00100000-0x7fffffff]
[ 0.218354] pnp 00:0a: [mem 0xfed45000-0xffffffff]
[ 0.218396] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.218398] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.218400] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.218403] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.218405] system 00:0a: [mem 0xfed45000-0xffffffff] could not be reserved
[ 0.218407] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.218862] pnp: PnP ACPI: found 11 devices
[ 0.218864] ACPI: ACPI bus type pnp unregistered
[ 0.224639] Switching to clocksource acpi_pm
[ 0.224773] PCI: max bus depth: 1 pci_try_num: 2
[ 0.224818] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.224822] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.224827] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.224829] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.224832] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 0.224834] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.224838] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[ 0.224862] pci 0000:00:12.0: PCI bridge to [bus 04-04]
[ 0.224872] pci 0000:00:12.0: bridge window [mem 0xfea00000-0xfebfffff]
[ 0.224894] pci 0000:00:08.0: setting latency timer to 64
[ 0.224898] pci 0000:00:0b.0: setting latency timer to 64
[ 0.225028] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.225040] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 0.225048] pci 0000:00:10.0: setting latency timer to 64
[ 0.225160] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[ 0.225169] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
[ 0.225176] pci 0000:00:12.0: setting latency timer to 64
[ 0.225182] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.225184] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.225186] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.225188] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.225190] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.225191] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff]
[ 0.225194] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.225196] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.225198] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.225200] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.225202] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.225204] pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.225206] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed44fff]
[ 0.225208] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.225210] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfe9fffff]
[ 0.225212] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.225215] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfebfffff]
[ 0.225250] NET: Registered protocol family 2
[ 0.225335] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.225829] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.227200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.227532] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.227534] TCP reno registered
[ 0.227542] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.227557] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.227651] NET: Registered protocol family 1
[ 0.227875] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.227893] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 0.320070] pci 0000:00:02.0: PCI INT A disabled
[ 0.320230] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.320248] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.320262] pci 0000:00:02.1: PCI INT B disabled
[ 0.320369] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 0.320378] pci 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
[ 0.392067] pci 0000:00:04.0: PCI INT A disabled
[ 0.392225] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[ 0.392242] pci 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
[ 0.392257] pci 0000:00:04.1: PCI INT B disabled
[ 0.392354] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 0.392450] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.392550] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.392657] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.392763] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.392890] pci 0000:02:00.0: Boot video device
[ 0.392895] PCI: CLS 64 bytes, default 64
[ 0.396876] IBS: LVT offset 1 assigned
[ 0.396886] perf: AMD IBS detected (0x0000001f)
[ 0.397001] audit: initializing netlink socket (disabled)
[ 0.397011] type=2000 audit(1388158125.396:1): initialized
[ 0.420317] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.421730] VFS: Disk quotas dquot_6.5.2
[ 0.421772] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.422157] fuse init (API version 7.17)
[ 0.422218] msgmni has been set to 2962
[ 0.422442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.422461] io scheduler noop registered
[ 0.422462] io scheduler deadline registered
[ 0.422486] io scheduler cfq registered (default)
[ 0.422959] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.422977] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.423109] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.423114] ACPI: Power Button [PWRB]
[ 0.423154] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.423157] ACPI: Power Button [PWRF]
[ 0.423348] Freeing initrd memory: 14308k freed
[ 0.425329] ERST: Table is not found!
[ 0.425330] GHES: HEST is not enabled!
[ 0.425437] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.445812] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.976535] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.992266] Linux agpgart interface v0.103
[ 0.993677] brd: module loaded
[ 0.994523] loop: module loaded
[ 0.994664] ahci 0000:00:09.0: version 3.0
[ 0.994820] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.994825] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.994864] ahci 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.994869] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 0.994919] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 0.994923] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
[ 0.994926] ahci 0000:00:09.0: setting latency timer to 64
[ 0.995630] scsi0 : ahci
[ 0.995759] scsi1 : ahci
[ 0.995861] scsi2 : ahci
[ 0.995916] scsi3 : ahci
[ 0.995973] scsi4 : ahci
[ 0.996054] scsi5 : ahci
[ 0.996152] ata1: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 40
[ 0.996154] ata2: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 40
[ 0.996157] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 40
[ 0.996159] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 40
[ 0.996161] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 40
[ 0.996163] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 40
[ 0.996542] Fixed MDIO Bus: probed
[ 0.996559] tun: Universal TUN/TAP device driver, 1.6
[ 0.996561] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.996640] PPP generic driver version 2.4.2
[ 0.996765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.996795] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.996815] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.996818] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.996924] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.996942] ehci_hcd 0000:00:02.1: debug port 1
[ 0.996949] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.996971] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfce7fc00
[ 1.008058] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.008211] hub 1-0:1.0: USB hub found
[ 1.008214] hub 1-0:1.0: 6 ports detected
[ 1.008321] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
[ 1.008336] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.008339] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.008413] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 1.008428] ehci_hcd 0000:00:04.1: debug port 1
[ 1.008435] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 1.008457] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfce7f800
[ 1.020060] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.020206] hub 2-0:1.0: USB hub found
[ 1.020210] hub 2-0:1.0: 6 ports detected
[ 1.020314] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.020367] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 1.020386] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.020389] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.020485] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 1.020514] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfce7e000
[ 1.078199] hub 3-0:1.0: USB hub found
[ 1.078205] hub 3-0:1.0: 6 ports detected
[ 1.078308] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
[ 1.078324] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.078326] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.078399] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 1.078425] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfce7d000
[ 1.134195] hub 4-0:1.0: USB hub found
[ 1.134201] hub 4-0:1.0: 6 ports detected
[ 1.134306] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.134366] usbcore: registered new interface driver libusual
[ 1.134395] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.134820] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.134826] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.134940] mousedev: PS/2 mouse device common for all mice
[ 1.135060] rtc_cmos 00:05: RTC can wake from S4
[ 1.135281] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.135329] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 1.135396] device-mapper: uevent: version 1.0.3
[ 1.135514] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.135521] cpuidle: using governor ladder
[ 1.135522] cpuidle: using governor menu
[ 1.135524] EFI Variables Facility v0.08 2004-May-17
[ 1.135700] TCP cubic registered
[ 1.135783] NET: Registered protocol family 10
[ 1.136176] NET: Registered protocol family 17
[ 1.136179] Registering the dns_resolver key type
[ 1.136327] registered taskstats version 1
[ 1.142011] Magic number: 9:583:488
[ 1.142081] regulator regulator.0: hash matches
[ 1.142164] rtc_cmos 00:05: setting system clock to 2013-12-27 15:28:47 UTC (1388158127)
[ 1.142172] powernow-k8: Found 1 AMD Athlon(tm) II X2 240 Processor (2 cpu cores) (version 2.20.00)
[ 1.142200] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 1.142202] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 1.142203] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 1.142205] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.142432] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.142435] EDD information not available.
[ 1.316068] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.316090] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.316104] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.316116] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.316129] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.316138] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.318586] ata1.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
[ 1.318589] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.319119] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[ 1.321180] ata1.00: configured for UDMA/133
[ 1.321384] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
[ 1.321546] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.321569] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.321615] sd 0:0:0:0: [sda] Write Protect is off
[ 1.321618] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.321665] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.322450] ata3.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[ 1.322454] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.322939] ata2.00: configured for UDMA/100
[ 1.328838] ata3.00: configured for UDMA/133
[ 1.331579] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 1.339992] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.339996] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.340166] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.340252] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.340454] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.340595] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.340619] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.340708] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.340710] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.340743] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.364733] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 1.365218] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.365881] sda: sda1 sda2 < sda5 sda6 >
[ 1.366382] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.367559] Freeing unused kernel memory: 924k freed
[ 1.367749] Write protecting the kernel read-only data: 12288k
[ 1.372278] Freeing unused kernel memory: 1588k freed
[ 1.375918] Freeing unused kernel memory: 1188k freed
[ 1.396069] udevd[97]: starting version 175
[ 1.405954] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.405958] vesafb: scrolling: redraw
[ 1.405961] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.411927] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010980000, using 3072k, total 3072k
[ 1.412188] Console: switching to colour frame buffer device 128x48
[ 1.416078] Refined TSC clocksource calibration: 2814.009 MHz.
[ 1.416083] Switching to clocksource tsc
[ 1.416536] fb0: VESA VGA frame buffer device
[ 1.484575] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.484752] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 1.484758] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 1.484763] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.549148] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:26:18:cf:e8:e6
[ 1.549153] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 1.624053] usb 3-4: new low-speed USB device number 2 using ohci_hcd
[ 1.833668] usbcore: registered new interface driver usbhid
[ 1.833671] usbhid: USB HID core driver
[ 1.863208] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.132071] usb 3-6: new low-speed USB device number 3 using ohci_hcd
[ 2.353268] input: Wireless Keyboard/Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-6/3-6:1.0/input/input2
[ 2.353365] generic-usb 0003:099A:7202.0001: input,hidraw0: USB HID v1.11 Keyboard [Wireless Keyboard/Mouse] on usb-0000:00:02.0-6/input0
[ 2.364485] input: Wireless Keyboard/Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-6/3-6:1.1/input/input3
[ 2.364619] generic-usb 0003:099A:7202.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Wireless Keyboard/Mouse] on usb-0000:00:02.0-6/input1
[ 3.933003] Adding 3903756k swap on /dev/sda5. Priority:-1 extents:1 across:3903756k
[ 4.597201] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.660841] udevd[377]: starting version 175
[ 5.553084] lp: driver loaded but no devices found
[ 6.043944] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 6.043949] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [io 0x700-0x73f]
[ 6.043951] ACPI: This conflict may cause random problems and system instability
[ 6.043953] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.043976] i2c i2c-1: nForce2 SMBus adapter at 0x700
[ 6.047526] wmi: Mapper loaded
[ 6.050817] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.122686] WARNING: You are using an experimental version of the media stack.
[ 6.122688] As the driver is backported to an older kernel, it doesn't offer
[ 6.122689] enough quality for its usage in production.
[ 6.122690] Use it with care.
[ 6.122690] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 6.122691] dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
[ 6.122693] 9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
[ 6.122693] 5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
[ 6.122695] experimental: c09515e968f1704b061229bad9c632f6a4499eba media_build: Fix PATCHLEVEL for kernel >= 3.10
[ 6.122696] v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
[ 6.135697] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 6.135873] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input4
[ 6.135923] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 6.146702] asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
[ 6.640594] MCE: In-kernel MCE decoding enabled.
[ 7.093386] Linux video capture interface: v2.00
[ 7.093390] WARNING: You are using an experimental version of the media stack.
[ 7.093391] As the driver is backported to an older kernel, it doesn't offer
[ 7.093392] enough quality for its usage in production.
[ 7.093393] Use it with care.
[ 7.093393] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 7.093394] dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
[ 7.093395] 9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
[ 7.093396] 5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
[ 7.093397] experimental: c09515e968f1704b061229bad9c632f6a4499eba media_build: Fix PATCHLEVEL for kernel >= 3.10
[ 7.093398] v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
[ 7.108374] EDAC MC: Ver: 2.1.0
[ 7.131220] saa7146: register extension 'budget dvb'
[ 7.131500] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
[ 7.131519] budget dvb 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17
[ 7.131564] saa7146: found saa7146 @ mem ffffc9000033ac00 (revision 1, irq 17) (0x13c2,0x101c)
[ 7.131568] saa7146 (0): dma buffer size 192512
[ 7.131570] DVB: registering new adapter (TT-Budget S2-1600 PCI)
[ 7.156371] AMD64 EDAC driver v3.4.0
[ 7.156486] EDAC amd64: DRAM ECC disabled.
[ 7.156494] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 7.156496] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 7.156497] (Note that use of the override may cause unknown side effects.)
[ 7.165180] adapter has MAC addr = 00:d0:5c:cc:b4:eb
[ 7.523281] WARNING: You are using an experimental version of the media stack.
[ 7.523283] As the driver is backported to an older kernel, it doesn't offer
[ 7.523284] enough quality for its usage in production.
[ 7.523285] Use it with care.
[ 7.523285] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 7.523286] dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
[ 7.523287] 9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
[ 7.523288] 5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
[ 7.523289] experimental: c09515e968f1704b061229bad9c632f6a4499eba media_build: Fix PATCHLEVEL for kernel >= 3.10
[ 7.523291] v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
[ 7.597297] input: iMON Panel, Knob and Mouse(15c2:0038) as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/input/input5
[ 7.679692] cx23885 driver version 0.0.3 loaded
[ 7.679801] cx23885 0000:04:00.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
[ 7.679971] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
[ 7.806295] cx23885_dvb_register() allocating 1 frontend(s)
[ 7.806299] cx23885[0]: cx23885 based dvb card
[ 7.840064] Registered IR keymap rc-imon-pad
[ 7.840165] input: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/rc/rc0/input6
[ 7.840221] rc0: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/rc/rc0
[ 7.848141] imon 3-4:1.0: iMON device (15c2:0038, intf0) on usb<3:2> initialized
[ 7.848162] imon 3-4:1.1: iMON device (15c2:0038, intf1) on usb<3:2> initialized
[ 7.848196] usbcore: registered new interface driver imon
[ 7.860159] stv6110x_attach: Attaching STV6110x
[ 7.891626] budget dvb 0000:01:06.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 7.896800] DS3000 chip version: 0.192 attached.
[ 7.995034] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 7.995040] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 7.995180] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 7.995184] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 7.995187] hda_intel: Disabling MSI
[ 7.995214] snd_hda_intel 0000:00:07.0: setting latency timer to 64
[ 8.039196] nvidia: module license 'NVIDIA' taints kernel.
[ 8.039200] Disabling lock debugging due to kernel taint
[ 8.094067] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[ 8.094074] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
[ 8.094082] nvidia 0000:02:00.0: setting latency timer to 64
[ 8.094086] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.094237] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
[ 8.103483] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 8.217104] ts2020_attach: Find tuner TS2020!
[ 8.217109] DVB: registering new adapter (cx23885[0])
[ 8.217115] cx23885 0000:04:00.0: DVB: registering adapter 1 frontend 0 (Montage Technology DS3000)...
[ 8.244159] TeVii S470 MAC= 00:18:bd:5b:2d:28
[ 8.244164] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 8.244170] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfea00000
[ 8.244176] cx23885 0000:04:00.0: setting latency timer to 64
[ 8.306971] imon 3-4:1.0: Looks like you're trying to use an IR protocol this device does not support
[ 8.306975] imon 3-4:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol
[ 9.547435] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.756145] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input7
[ 9.756224] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
[ 9.756271] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[ 9.756322] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[ 9.756368] input: HDA NVidia Line-Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[ 9.756416] input: HDA NVidia Line-Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[ 9.756469] input: HDA NVidia Line-Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[ 9.756516] input: HDA NVidia Line-Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
[ 9.821137] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 9.822023] SGI XFS Quota Management subsystem
[ 9.823254] XFS (sdb6): Mounting Filesystem
[ 9.933679] XFS (sdb6): Ending clean mount
[ 10.019886] RPC: Registered named UNIX socket transport module.
[ 10.019890] RPC: Registered udp transport module.
[ 10.019892] RPC: Registered tcp transport module.
[ 10.019893] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.020152] init: statd-mounting main process (1063) killed by TERM signal
[ 10.055039] FS-Cache: Loaded
[ 10.083498] FS-Cache: Netfs 'nfs' registered for caching
[ 10.238159] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 10.303568] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.523609] input: eventlircd as /devices/virtual/input/input15
[ 10.634691] [drm] Initialized drm 1.1.0 20060810
[ 10.673692] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 14.123139] init: vdr-frontend main process (1262) terminated with status 252
[ 14.123170] init: vdr-frontend main process ended, respawning
[ 14.941331] init: failsafe main process (1148) killed by TERM signal
[ 14.956792] init: vdr-frontend main process (1408) terminated with status 252
[ 14.956823] init: vdr-frontend main process ended, respawning
[ 16.977472] NVRM: Your system is not currently configured to drive a VGA console
[ 16.977476] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 16.977479] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 16.977481] NVRM: drivers including, but not limited to, vesafb, may result in
[ 16.977483] NVRM: corruption and stability problems, and is not supported.
[ 18.543272] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 18.754781] NFSD: starting 90-second grace period
[ 18.832039] eth0: no IPv6 routers present
[ 21.884678] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 21.920639] init: vdr-frontend main process (1438) terminated with status 250
[ 21.920706] init: vdr-frontend main process ended, respawning
[ 22.271866] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[ 45.646794] init: plymouth-stop pre-start process (2433) terminated with status 1
[ 91.757851] init: vdr-frontend main process (1700) terminated with status 1
[ 100.124510] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 100.126171] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[ 385.770300] init: vdr-frontend main process (2711) terminated with status 1
[ 392.970419] init: irexec main process (1155) killed by TERM signal
[ 393.112822] init: eventlircd main process (1154) killed by TERM signal
[ 393.373439] saa7146: unregister extension 'budget dvb'
[ 393.375364] budget dvb 0000:01:06.0: PCI INT A disabled
[ 393.406992] cx23885 0000:04:00.0: PCI INT A disabled
[ 393.733438] PM: Syncing filesystems ... done.
[ 393.758224] PM: Preparing system for mem sleep
[ 394.688362] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 394.704104] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 394.720103] PM: Entering mem sleep
[ 394.720130] Suspending console(s) (use no_console_suspend to debug)
[ 394.720698] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 394.720852] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 394.720917] serial 00:08: disabled
[ 394.720921] serial 00:08: wake-up capability disabled by ACPI
[ 394.720981] sd 0:0:0:0: [sda] Stopping disk
[ 394.721060] sd 2:0:0:0: [sdb] Stopping disk
[ 394.740168] ohci_hcd 0000:00:02.0: PCI INT A disabled
[ 394.764088] ehci_hcd 0000:00:04.1: PCI INT B disabled
[ 394.788088] ehci_hcd 0000:00:02.1: PCI INT B disabled
[ 394.800164] ohci_hcd 0000:00:04.0: PCI INT A disabled
[ 394.960100] snd_hda_intel 0000:00:07.0: PCI INT A disabled
[ 394.976297] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D3
[ 394.976311] PM: suspend of drv:snd_hda_intel dev:0000:00:07.0 complete after 254.637 msecs
[ 395.444336] PM: suspend of drv:sd dev:0:0:0:0 complete after 723.481 msecs
[ 395.444395] PM: suspend of drv:scsi dev:target0:0:0 complete after 723.484 msecs
[ 395.444420] PM: suspend of drv:scsi dev:host0 complete after 723.221 msecs
[ 395.460084] PM: suspend of drv:ahci dev:0000:00:09.0 complete after 738.438 msecs
[ 395.460142] PM: suspend of drv: dev:pci0000:00 complete after 737.320 msecs
[ 395.460167] PM: suspend of devices complete after 739.860 msecs
[ 395.460174] PM: suspend devices took 0.740 seconds
[ 395.460647] forcedeth 0000:00:0a.0: PME# enabled
[ 395.460670] forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
[ 395.476131] ehci_hcd 0000:00:04.1: PME# enabled
[ 395.476155] ehci_hcd 0000:00:04.1: wake-up capability enabled by ACPI
[ 395.492109] ohci_hcd 0000:00:04.0: PME# enabled
[ 395.492133] ohci_hcd 0000:00:04.0: wake-up capability enabled by ACPI
[ 395.508110] ehci_hcd 0000:00:02.1: PME# enabled
[ 395.508133] ehci_hcd 0000:00:02.1: wake-up capability enabled by ACPI
[ 395.524109] ohci_hcd 0000:00:02.0: PME# enabled
[ 395.524132] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
[ 395.540338] PM: late suspend of devices complete after 80.152 msecs
[ 395.540559] ACPI: Preparing to enter system sleep state S3
[ 395.542717] PM: Saving platform NVS memory
[ 395.543302] Disabling non-boot CPUs ...
[ 395.545066] CPU 1 is now offline
[ 395.545800] ACPI: Low-level resume complete
[ 395.545800] PM: Restoring platform NVS memory
[ 395.545800] Enabling non-boot CPUs ...
[ 395.545800] Booting Node 0 Processor 1 APIC 0x1
[ 395.545800] smpboot cpu 1: start_ip = 99000
[ 395.545037] Calibrating delay loop (skipped) already calibrated this CPU
[ 395.545037] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
[ 395.545037] perf: IBS APIC setup failed on cpu #1
[ 395.578429] NMI watchdog enabled, takes one hw-pmu counter.
[ 395.578595] CPU1 is up
[ 395.579034] ACPI: Waking up from system sleep state S3
[ 395.580223] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[ 395.580235] ohci_hcd 0000:00:02.0: wake-up capability disabled by ACPI
[ 395.580238] ohci_hcd 0000:00:02.0: PME# disabled
[ 395.580254] ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[ 395.580266] ehci_hcd 0000:00:02.1: wake-up capability disabled by ACPI
[ 395.580269] ehci_hcd 0000:00:02.1: PME# disabled
[ 395.580283] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[ 395.580292] ohci_hcd 0000:00:04.0: wake-up capability disabled by ACPI
[ 395.580295] ohci_hcd 0000:00:04.0: PME# disabled
[ 395.580310] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[ 395.580322] ehci_hcd 0000:00:04.1: wake-up capability disabled by ACPI
[ 395.580325] ehci_hcd 0000:00:04.1: PME# disabled
[ 395.580341] snd_hda_intel 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[ 395.580445] snd_hda_intel 0000:00:07.0: Enabling HT MSI Mapping
[ 395.580557] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 395.580571] ahci 0000:00:09.0: restoring config space at offset 0x1 (was 0xb00107, writing 0xb00507)
[ 395.580684] ahci 0000:00:09.0: Enabling HT MSI Mapping
[ 395.580698] forcedeth 0000:00:0a.0: restoring config space at offset 0x7 (was 0x0, writing 0xfce7f000)
[ 395.580700] forcedeth 0000:00:0a.0: restoring config space at offset 0x6 (was 0x0, writing 0xfce7f400)
[ 395.580818] forcedeth 0000:00:0a.0: Enabling HT MSI Mapping
[ 395.580829] pci 0000:00:0b.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 395.580943] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 395.581213] pcieport 0000:00:12.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
[ 395.581366] pci 0000:01:06.0: restoring config space at offset 0x1 (was 0x2800006, writing 0x2800002)
[ 395.581376] nvidia 0000:02:00.0: restoring config space at offset 0xc (was 0xfe9e0000, writing 0x0)
[ 395.581383] nvidia 0000:02:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[ 395.581423] pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102)
[ 395.581546] PM: early resume of devices complete after 1.617 msecs
[ 395.581646] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 395.581656] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 395.581673] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 395.581678] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 395.581680] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
[ 395.581684] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 395.581694] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
[ 395.581697] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 395.581744] pci 0000:00:08.0: setting latency timer to 64
[ 395.581790] pci 0000:00:0b.0: setting latency timer to 64
[ 395.604164] ahci 0000:00:09.0: setting latency timer to 64
[ 395.604267] sd 0:0:0:0: [sda] Starting disk
[ 395.604285] sd 2:0:0:0: [sdb] Starting disk
[ 395.604295] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 395.604301] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
[ 395.604305] forcedeth 0000:00:0a.0: PME# disabled
[ 395.604589] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 395.604600] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 395.604610] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 395.604619] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 395.604623] snd_hda_intel 0000:00:07.0: setting latency timer to 64
[ 395.605487] serial 00:08: activated
[ 395.669689] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 395.669910] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 395.684155] PM: resume of drv:hub dev:3-0:1.0 complete after 102.183 msecs
[ 395.684171] PM: resume of drv: dev:ep_00 complete after 102.184 msecs
[ 395.684200] PM: resume of drv:hub dev:4-0:1.0 complete after 102.194 msecs
[ 395.684213] PM: resume of drv: dev:ep_00 complete after 102.188 msecs
[ 395.684224] PM: resume of drv: dev:ep_81 complete after 102.248 msecs
[ 395.684234] PM: resume of drv: dev:ep_81 complete after 102.219 msecs
[ 395.733218] PM: resume of drv:imon dev:3-4:1.0 complete after 151.077 msecs
[ 395.733232] PM: resume of drv:imon dev:3-4:1.1 complete after 151.079 msecs
[ 395.733246] PM: resume of drv: dev:ep_00 complete after 151.073 msecs
[ 395.733256] PM: resume of drv: dev:ep_81 complete after 151.113 msecs
[ 395.733265] PM: resume of drv: dev:ep_82 complete after 151.103 msecs
[ 395.736177] PM: resume of drv:usbhid dev:3-6:1.0 complete after 153.976 msecs
[ 395.736191] PM: resume of drv:usbhid dev:3-6:1.1 complete after 153.978 msecs
[ 395.736204] PM: resume of drv: dev:ep_00 complete after 153.968 msecs
[ 395.736214] PM: resume of drv: dev:ep_81 complete after 154.011 msecs
[ 395.736224] PM: resume of drv: dev:ep_82 complete after 153.998 msecs
[ 395.924120] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 395.924200] ata4: SATA link down (SStatus 0 SControl 300)
[ 395.924271] ata5: SATA link down (SStatus 0 SControl 300)
[ 395.924331] ata6: SATA link down (SStatus 0 SControl 300)
[ 395.930300] ata2.00: configured for UDMA/100
[ 396.165392] PM: resume of drv:nvidia dev:0000:02:00.0 complete after 583.653 msecs
[ 398.342639] forcedeth 0000:00:0a.0: eth0: link up
[ 399.620082] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 399.632878] ata3.00: configured for UDMA/133
[ 399.639832] PM: resume of drv:sd dev:2:0:0:0 complete after 4057.721 msecs
[ 399.639884] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 4057.763 msecs
[ 400.964077] ata1: link is slow to respond, please be patient (ready=0)
[ 403.540081] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 403.566222] ata1.00: configured for UDMA/133
[ 403.578974] PM: resume of drv:sd dev:0:0:0:0 complete after 7996.921 msecs
[ 403.579031] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 7996.967 msecs
[ 403.579052] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 7973.290 msecs
[ 403.579293] PM: resume of devices complete after 7997.706 msecs
[ 403.579563] PM: resume devices took 7.996 seconds
[ 403.579670] PM: Finishing wakeup.
[ 403.579673] Restarting tasks ... done.
[ 403.580467] video LNXVIDEO:00: Restoring backlight state
[ 403.851593] saa7146: register extension 'budget dvb'
[ 403.851677] budget dvb 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17
[ 403.851746] saa7146: found saa7146 @ mem ffffc9000033ac00 (revision 1, irq 17) (0x13c2,0x101c)
[ 403.851757] saa7146 (0): dma buffer size 192512
[ 403.851763] DVB: registering new adapter (TT-Budget S2-1600 PCI)
[ 403.875437] input: eventlircd as /devices/virtual/input/input16
[ 403.904278] imon 3-4:1.0: Looks like you're trying to use an IR protocol this device does not support
[ 403.904289] imon 3-4:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol
[ 403.950570] adapter has MAC addr = 00:d0:5c:cc:b4:eb
[ 404.323435] stv6110x_attach: Attaching STV6110x
[ 404.348827] budget dvb 0000:01:06.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...