Hallo zusammen,
ich habe gestern einen PCTV Sports (76e) USB DVB-T Stick gekauft und an meinen Rechner angeschlossen.
Code
lsusb
Bus 001 Device 006: ID 1d19:1101 Dexatek Technology Ltd. DK DVB-T DongleBin dann nach einer Weile Suchen auf die Seite http://www.mail-archive.com/vdr@linuxtv.org/msg15953.html gestoßen und konnte damit auch weiter kommen.
Sobald ich die Treiber geladen hatte, tauchte auch /dev/dvb der adapter0 Eintrag auf.
Code
ls -la /dev/dvb/adapter0/
insgesamt 0
drwxr-xr-x 2 root root 120 Okt 19 18:34 .
drwxr-xr-x 3 root root 60 Okt 19 18:34 ..
crw-rw----+ 1 root video 212, 0 Okt 19 18:34 demux0
crw-rw----+ 1 root video 212, 1 Okt 19 18:34 dvr0
crw-rw----+ 1 root video 212, 3 Okt 19 18:34 frontend0
crw-rw----+ 1 root video 212, 2 Okt 19 18:34 net0Code
dmesg
[ 1230.187674] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 1431.878223] usb 1-7: USB disconnect, device number 3
[ 1431.904768] dvb-usb: DK DONGLE successfully deinitialized and disconnected.
[ 1438.476087] usb 1-7: new high-speed USB device number 5 using ehci_hcd
[ 1438.626035] dvb-usb: found a 'DK DONGLE' in warm state.
[ 1438.626058] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 1438.627728] DVB: registering new adapter (DK DONGLE)
[ 1438.644085] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 1438.924444] RTL2832U check_tuner_type : FC0013 tuner on board...
[ 1439.489458] DVB: registering adapter 0 frontend 0 (Realtek DVB-T RTL2832)...
[ 1439.489808] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-7/input/input17
[ 1439.490031] dvb-usb: schedule remote query interval to 287 msecs.
[ 1439.490042] dvb-usb: DK DONGLE successfully initialized and connected.
[ 1697.339712] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 2049.551486] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 2481.293371] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 2737.927660] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 3059.627215] usb 1-7: USB disconnect, device number 5
[ 3059.652796] dvb-usb: DK DONGLE successfully deinitialized and disconnected.
[ 4249.116085] usb 1-7: new high-speed USB device number 6 using ehci_hcd
[ 4249.265922] dvb-usb: found a 'DK DONGLE' in warm state.
[ 4249.265944] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4249.267626] DVB: registering new adapter (DK DONGLE)
[ 4249.284341] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 4249.564592] RTL2832U check_tuner_type : FC0013 tuner on board...
[ 4250.129480] DVB: registering adapter 0 frontend 0 (Realtek DVB-T RTL2832)...
[ 4250.129828] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-7/input/input18
[ 4250.129982] dvb-usb: schedule remote query interval to 287 msecs.
[ 4250.129991] dvb-usb: DK DONGLE successfully initialized and connected.
[ 4511.503735] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)Sieht für mich alles gut aus.
Hab dann aus dem Channel Wiki die DVB-T Sender reingezogen, bleibt aber alles schwarz. Also w_scan installilert und mit
Code
w_scan -ft -c DE -o 7 >> /etc/vdr/channels.conf
w_scan version 20120415 (compiled for DVB API 5.4)
using settings for GERMANY
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format vdr-1.7
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Realtek DVB-T RTL2832": good :-)
Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.4
frontend 'Realtek DVB-T RTL2832' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (50.00MHz ... 862.00MHz)den Scan gestartet. Ergebnis sieht man oben - allerdings beendet der Scan nach ca. 3 Minuten mit
Code
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!Wo kann ich weitersuchen?
Ciao jfr