setup remote control with irw

  • hi again
    my satelco is working very limited on yavdr 0.4 while on 0.3 it was working great .with limited i mean that most functions dont work.in 0.3 i could setup my remote with irw while on 0.4 irw does not work.any way to make irw work?


    Sent from my GT-I9100 using Tapatalk

    Zotac Zbox HD-ID11, 4gb ram,60 GB ssd , tevii s660 usb, satelco r/c

  • Hi mushroom,


    type on the console:


    sudo cat /proc/bus/input/devices


    Please post the output.


    Albert

  • thanks for replying
    here is the output


    root@yavdr:/home/yavdr# cat /proc/bus/input/devices
    I: Bus=0019 Vendor=0000 Product=0001 Version=0000
    N: Name="Power Button"
    P: Phys=PNP0C0C/button/input0
    S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    U: Uniq=
    H: Handlers=kbd event0
    B: PROP=0
    B: EV=3
    B: KEY=10000000000000 0


    I: Bus=0019 Vendor=0000 Product=0001 Version=0000
    N: Name="Power Button"
    P: Phys=LNXPWRBN/button/input0
    S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    U: Uniq=
    H: Handlers=kbd event1
    B: PROP=0
    B: EV=3
    B: KEY=10000000000000 0


    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="lircd"
    P: Phys=
    S: Sysfs=/devices/virtual/input/input2
    U: Uniq=
    H: Handlers=sysrq rfkill kbd event2
    B: PROP=0
    B: EV=100003
    B: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe


    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="eventlircd"
    P: Phys=/dev/input/event2
    S: Sysfs=/devices/virtual/input/input3
    U: Uniq=
    H: Handlers=event3
    B: PROP=0
    B: EV=3
    B: KEY=ffffffffff 0 0 0 0 0 3fcff 7fff8fff00ff03ff 0 0 0 0


    I: Bus=0003 Vendor=9022 Product=d660 Version=0000
    N: Name="IR-receiver inside an USB DVB receiver"
    P: Phys=usb-0000:00:1d.7-5.1/ir0
    S: Sysfs=/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/input/input4
    U: Uniq=
    H: Handlers=kbd event4
    B: PROP=0
    B: EV=3
    B: KEY=6c0904 2470c100000000 0 800010000 19040000840 1e168000000001 f800000000000ffc


    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="lircd"
    P: Phys=
    S: Sysfs=/devices/virtual/input/input5
    U: Uniq=
    H: Handlers=sysrq rfkill kbd event5
    B: PROP=0
    B: EV=100003
    B: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe


    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="eventlircd"
    P: Phys=/dev/input/event5
    S: Sysfs=/devices/virtual/input/input6
    U: Uniq=
    H: Handlers=event6
    B: PROP=0
    B: EV=3
    B: KEY=ffffffffff 0 0 0 0 0 3fcff 7fff8fff00ff03ff 0 0 0 0

    Zotac Zbox HD-ID11, 4gb ram,60 GB ssd , tevii s660 usb, satelco r/c

  • Hi mushroom,


    I: Bus=0000 Vendor=0000 Product=0000 Version=0000


    what?


    type that:
    apt-get update
    apt-get dist-upgrade


    than again:
    cat /proc/bus/input/devices
    lsusb
    dmesg


    Please post they too.


    Write your hardware in the signature.


    Is your satelco new?


    Albert

    2 Mal editiert, zuletzt von DaKilla ()

  • do you use an external USB hub?


    Albert

  • PLEASE!


    Write your hardware in the signature.


    sudo ir-keytable and post it (I suspect, the output is "No such file or directory")


    You can still try this: aptitude install linux-media-dkms than sudo ir-keytable again.


    Do you have any settings for the remote in the WFE?


    Albert

  • I started my installation from the beginning.but due to holidays i will be here again on monday.i will post my results from a clean installation so we can see where is the problem.i have also bought a medion rc i will check also


    Sent from my GT-I9100 using Tapatalk

    Zotac Zbox HD-ID11, 4gb ram,60 GB ssd , tevii s660 usb, satelco r/c

  • Hi mushroom,


    1. write your hardware in the signature. Please!
    2. after the clean install: apt-get update, apt-get dist-upgrade, then you can try something!


    Albert

  • Ok i will try google translate to edit my signature


    You have absolutely no signature.


    login -> Profil bearbeiten -> Profil -> Signatur -> fill it -> Vorschau shows the changes -> Absenden when ready ;D


    a signature looks like this:


    HD-VDR | yaVDR 0.4 | Cooltek AH-01 | AT5IONT-I | 4GB | 1 TB 2,5" | TeVii S480 V2.1 | Harmony 300i MCE | Samsung UE40C6200
    SD-VDR | c't-VDR 7 | MSI Hermes, LIRC serial | 120 GB | DVD-RW | TT Premium S-2300 RGB + TT-budget, ausgeborgt
    HD-Win. | DVBViewer | FSC Celsius M460 C2D E8400 8GB 120GB SSD + SATA 2 TB | TT S2-3200
    "Die Intelligenz auf dem Planeten ist eine Konstante. Die Bevölkerung wächst." Zitat von Murphy; Wer hier Rechtschreibfehler findet, darf sie behalten.


    Albert

  • So this is your remote receiver?

    Code
    Bus 001 Device 005: ID 0419:0001 Samsung Info. Systems America, Inc. IrDA Remote Controller / Creative Cordless Mouse


    For this receiver according to /lib/udev/rules.d/98-lircd.rules a lircd instance using /usr/share/yavdr-remote/remotes/samsung-lircd.conf will be started. If you have an old lircd.conf from yaVDR 0.3 you culd rename it's keys to be namespace compliant (have a look at /etc/vdr/remote.conf to see which keynames there are defined (e.g. KEY_OK and so on)).
    Do you use an original remote that was delivered together with the receiver?
    What is the output of:

    Code
    ls /var/run/lirc/licd*

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • yeap this is it.unfortunely i dont have a backup of yavdr 0.3 lircd.conf.on 0.3 i just did run irw and i setup manually the remote on my tv by pressing the keys.
    No i have a tevii s660 dvb card and i bought the remote control seperate. i also have another 2-3 remote controls have which i didnt test.one is the tevii that came with the card,one technotrend original that came with a twin dvbs2 card i bought and another one i think its called medion.anywaay here is the output :


    ls /var/run/lirc/lircd*
    /var/run/lirc/lircd
    /var/run/lirc/lircd-input~wake-up~pci-0000:00:1d.7-usb-0:5.2:1.0
    /var/run/lirc/lircd-usb~hiddev0
    /var/run/lirc/lircd-usb~hiddev0.pid

    Zotac Zbox HD-ID11, 4gb ram,60 GB ssd , tevii s660 usb, satelco r/c

  • Code
    /var/run/lirc/lircd-usb~hiddev0


    With "sudo irw /var/run/lirc/lircd-usb~hiddev0" you can check what key events lircd is delivering.
    You probably will have to use irrecord in order to create a valid lircd.conf file and name all keys to be namespace compliant.


    You could test the tevii remote, also if it's working - might be easier for you to adjust the keys for it than creating a new lircd.conf keymap.

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • when i type sudo irw /var/run/lirc/lircd-usb~hiddev0 i get this
    irw /var/run/lirc/lircd-usb~hiddev0
    00000000ffcc001f 00 KEY_CHANNELUP Samsung
    00000000ffcc001f 00 KEY_CHANNELUP Samsung
    00000000ffcc001f 00 KEY_CHANNELUP Samsung
    00000000ffcc001f 00 KEY_CHANNELUP Samsung
    00000000ffcc001f 00 KEY_CHANNELUP Samsung
    00000000ffcc001f 00 KEY_CHANNELUP Samsung
    00000000ffcc001f 00 KEY_CHANNELUP Samsung
    00000000ffcc001f 00 KEY_CHANNELUP Samsung
    00000000ffcc001f 00 KEY_CHANNELUP Samsung
    whatever key i press i get this result
    is this normal?


    also here is the output of sudo ir-keytable
    sudo ir-keytable
    [sudo] password for yavdr:
    Couldn't find any node at /sys/class/rc/rc*.

    Zotac Zbox HD-ID11, 4gb ram,60 GB ssd , tevii s660 usb, satelco r/c

    Einmal editiert, zuletzt von mushroom () aus folgendem Grund: corrections

  • also when i type sudo irrecord -H samsung -d /dev/usb/hiddev1/ /home/yavdr/newlircd.conf


    i get this


    irrecord - application for recording IR-codes for usage with lirc


    Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)


    irrecord: initializing '/dev/usb/hiddev1/'
    irrecord: unable to open '/dev/usb/hiddev1/'
    irrecord: could not init hardware (lircd running ? --> close it, check permissions)


    any solution? desperate

    Zotac Zbox HD-ID11, 4gb ram,60 GB ssd , tevii s660 usb, satelco r/c

  • any solution?


    AFAIK you will have to stop eventlircd before using irrecord: "sudo stop eventlircd"

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!