Openbox crashed

  • Hallo
    Seit gestern (Nvidia update) geht gar nix mehr (selbst nach Neuinstallation)
    syslog:
    Oct 14 22:29:14 Origen kernel: [ 718.089811] NVRM: RmInitAdapter failed! (0x27:0x28:1193)
    Oct 14 22:29:14 Origen kernel: [ 718.089821] NVRM: rm_init_adapter(0) failed
    Oct 14 22:29:14 Origen kernel: [ 718.205147] NVRM: RmInitAdapter failed! (0x27:0x28:1193)
    Oct 14 22:29:14 Origen kernel: [ 718.205157] NVRM: rm_init_adapter(0) failed
    Oct 14 22:29:29 Origen init: openbox main process (2876) terminated with status 1
    Oct 14 22:29:29 Origen init: openbox main process ended, respawning
    Oct 14 22:29:29 Origen init: plymouth-stop pre-start process (2942) terminated with status 1
    Oct 14 22:29:29 Origen acpid: client 2893[0:0] has disconnected
    Oct 14 22:29:29 Origen acpid: client connected from 2950[0:0]
    Oct 14 22:29:29 Origen acpid: 1 client rule loaded
    Oct 14 22:29:29 Origen kernel: [ 733.112178] NVRM: RmInitAdapter failed! (0x27:0x28:1193)
    Oct 14 22:29:29 Origen kernel: [ 733.112187] NVRM: rm_init_adapter(0) failed
    Oct 14 22:29:29 Origen kernel: [ 733.229861] NVRM: RmInitAdapter failed! (0x27:0x28:1193)
    Oct 14 22:29:29 Origen kernel: [ 733.229870] NVRM: rm_init_adapter(0) failed
    Oct 14 22:29:44 Origen init: openbox main process (2943) terminated with status 1
    Oct 14 22:29:44 Origen init: openbox main process ended, respawning
    Oct 14 22:29:44 Origen init: plymouth-stop pre-start process (2965) terminated with status 1
    Oct 14 22:29:44 Origen acpid: client 2950[0:0] has disconnected
    Oct 14 22:29:44 Origen acpid: client connected from 2973[0:0]
    Oct 14 22:29:44 Origen acpid: 1 client rule loaded
    Oct 14 22:29:44 Origen kernel: [ 748.138282] NVRM: RmInitAdapter failed! (0x27:0x28:1193)
    Oct 14 22:29:44 Origen kernel: [ 748.138292] NVRM: rm_init_adapter(0) failed
    Oct 14 22:29:44 Origen kernel: [ 748.254499] NVRM: RmInitAdapter failed! (0x27:0x28:1193)
    Oct 14 22:29:44 Origen kernel: [ 748.254508] NVRM: rm_init_adapter(0) failed


    Hab was zum Fehler bezüglich nouveau blacklisten gefunden, das hilft aber nicht :(
    Danke schonmal

    VDR1 yaVDR 0.6: Gehäuse: OrigenAE X15e Board: Giada MG-C1037-SL Grafik: GT620 CPU: Celeron 1037U Ram: 2GB DVB: CineS2 Festplatte: 2x1TB
    VDR2 yaVDR 0.6: Gehäuse: Streacom F7C Board: Zotac Z68ITX-B-E Grafik: GT430 CPU: Pentium G630 Ram: 8GB DVB: CineS2 Festplatte: 30GB mSata + 500GB 2,5
    VDR3 yaVDR 0.6: Gehäuse: HP N36L Ram: 8GB DVB: 2 x CineS2 Festplatten: 2x 1,5TB und 2x2TB
    OctopusNet V1 + Rack 4xS2 + 8xS2

  • @TommyZ


    Also seit dem Update auf 285.xx?


    Kannst mal schauen ob in der "/etc/default/grub" beim Punkt "GRUB_CMDLINE_LINUX_DEFAULT" ein "vmalloc" Wert definiert ist?


    Regards
    fnu

    HowTo: APT pinning

  • vmalloc=256m

    VDR1 yaVDR 0.6: Gehäuse: OrigenAE X15e Board: Giada MG-C1037-SL Grafik: GT620 CPU: Celeron 1037U Ram: 2GB DVB: CineS2 Festplatte: 2x1TB
    VDR2 yaVDR 0.6: Gehäuse: Streacom F7C Board: Zotac Z68ITX-B-E Grafik: GT430 CPU: Pentium G630 Ram: 8GB DVB: CineS2 Festplatte: 30GB mSata + 500GB 2,5
    VDR3 yaVDR 0.6: Gehäuse: HP N36L Ram: 8GB DVB: 2 x CineS2 Festplatten: 2x 1,5TB und 2x2TB
    OctopusNet V1 + Rack 4xS2 + 8xS2

  • Hmm, wäre IMHO nur ein Workaround, aber versuch mal hier höhere Werte, 320m, 384m oder gar 512m.


    Regards
    fnu

    HowTo: APT pinning

  • Selbst bei 512m bleibt der Fehler.

    VDR1 yaVDR 0.6: Gehäuse: OrigenAE X15e Board: Giada MG-C1037-SL Grafik: GT620 CPU: Celeron 1037U Ram: 2GB DVB: CineS2 Festplatte: 2x1TB
    VDR2 yaVDR 0.6: Gehäuse: Streacom F7C Board: Zotac Z68ITX-B-E Grafik: GT430 CPU: Pentium G630 Ram: 8GB DVB: CineS2 Festplatte: 30GB mSata + 500GB 2,5
    VDR3 yaVDR 0.6: Gehäuse: HP N36L Ram: 8GB DVB: 2 x CineS2 Festplatten: 2x 1,5TB und 2x2TB
    OctopusNet V1 + Rack 4xS2 + 8xS2

  • Der Wert war richtig aktiviert? Also


    Code
    #\> sudo vi /etc/default/grub
    #\> sudo update-grub
    #\> sudo reboot


    Regards
    fnu

    HowTo: APT pinning

  • Tja, ich und die Linux-Basics ;)
    Nun vollständig angewendet und ...
    Fehler bleibt immer noch
    :(

    VDR1 yaVDR 0.6: Gehäuse: OrigenAE X15e Board: Giada MG-C1037-SL Grafik: GT620 CPU: Celeron 1037U Ram: 2GB DVB: CineS2 Festplatte: 2x1TB
    VDR2 yaVDR 0.6: Gehäuse: Streacom F7C Board: Zotac Z68ITX-B-E Grafik: GT430 CPU: Pentium G630 Ram: 8GB DVB: CineS2 Festplatte: 30GB mSata + 500GB 2,5
    VDR3 yaVDR 0.6: Gehäuse: HP N36L Ram: 8GB DVB: 2 x CineS2 Festplatten: 2x 1,5TB und 2x2TB
    OctopusNet V1 + Rack 4xS2 + 8xS2

  • Hmm, schade, dann wieder zurückkonfigurieren auf "vmalloc=256m", wie oben beschrieben ...


    Du hast immer noch den Nvidia 285.xx installiert? Kannst Du mal eben nach dem Reboot


    Code
    #\> sudo apt-cache policy nvidia-current


    abrufen und posten?


    Regards
    fnu

    HowTo: APT pinning

  • root@Origen:/home/tom# apt-cache policy nvidia-current
    nvidia-current:
    Installiert: 285.05.09-0yavdr0~natty
    Kandidat: 285.05.09-0yavdr0~natty
    Versionstabelle:
    *** 285.05.09-0yavdr0~natty 0
    500 http://ppa.launchpad.net/yavdr/main/ubuntu/ natty/main amd64 Packages
    100 /var/lib/dpkg/status
    270.41.06-0ubuntu1 0
    500 http://de.archive.ubuntu.com/ubuntu/ natty/restricted amd64 Packages
    root@Origen:/home/tom#

    VDR1 yaVDR 0.6: Gehäuse: OrigenAE X15e Board: Giada MG-C1037-SL Grafik: GT620 CPU: Celeron 1037U Ram: 2GB DVB: CineS2 Festplatte: 2x1TB
    VDR2 yaVDR 0.6: Gehäuse: Streacom F7C Board: Zotac Z68ITX-B-E Grafik: GT430 CPU: Pentium G630 Ram: 8GB DVB: CineS2 Festplatte: 30GB mSata + 500GB 2,5
    VDR3 yaVDR 0.6: Gehäuse: HP N36L Ram: 8GB DVB: 2 x CineS2 Festplatten: 2x 1,5TB und 2x2TB
    OctopusNet V1 + Rack 4xS2 + 8xS2

  • Ok, jetzt gibt zwei Möglichkeiten um evtl. weiterzukommen, Du nimmst den "vmalloc=256m" komplett raus und versucht es nochmal und/oder wir machen einen Downgrade auf den Ubuntu-Treiber:


    Code
    #\> sudo apt-get remove nvidia-current
    #\> sudo apt-get install nvidia-current=270.41.06-0ubuntu1
    #\> sudo reboot


    und schaust ob der Fehler bleibt.


    Regards
    fnu

    HowTo: APT pinning

  • Ohne vmalloc selber Fehler
    Nach downgrade ist der Fehler weg
    Aber warum hab nur ich den Fehler ??????

    VDR1 yaVDR 0.6: Gehäuse: OrigenAE X15e Board: Giada MG-C1037-SL Grafik: GT620 CPU: Celeron 1037U Ram: 2GB DVB: CineS2 Festplatte: 2x1TB
    VDR2 yaVDR 0.6: Gehäuse: Streacom F7C Board: Zotac Z68ITX-B-E Grafik: GT430 CPU: Pentium G630 Ram: 8GB DVB: CineS2 Festplatte: 30GB mSata + 500GB 2,5
    VDR3 yaVDR 0.6: Gehäuse: HP N36L Ram: 8GB DVB: 2 x CineS2 Festplatten: 2x 1,5TB und 2x2TB
    OctopusNet V1 + Rack 4xS2 + 8xS2

  • @TommyZ


    Man findet hierzu was bzgl. Nvidia IGPs hier und da, daher hast "nur Du" das Problem und auch nur mit 285.xx. Da für Deinen 9400er vmtl. eh wenig bis gar nichts neues in 285.xx ist, kannst Du IMHO bei dem 270.xx erstmal bleiben.


    Code
    #\> aptitude hold nivida-current


    Ob Du nun auf "vmalloc=256m" zurückgehst, überlasse ich Dir ...


    Regards
    fnu

    HowTo: APT pinning

  • Tja, spiel ja schon länger mit dem Gedanken die onboard 9400er gegen eine ander zu tauschen, aber bin mir nicht sicher welche ;)
    520er oder noch besser?
    Naja, werd mal schauen, was ich mache
    Danke für die Hilfe

    VDR1 yaVDR 0.6: Gehäuse: OrigenAE X15e Board: Giada MG-C1037-SL Grafik: GT620 CPU: Celeron 1037U Ram: 2GB DVB: CineS2 Festplatte: 2x1TB
    VDR2 yaVDR 0.6: Gehäuse: Streacom F7C Board: Zotac Z68ITX-B-E Grafik: GT430 CPU: Pentium G630 Ram: 8GB DVB: CineS2 Festplatte: 30GB mSata + 500GB 2,5
    VDR3 yaVDR 0.6: Gehäuse: HP N36L Ram: 8GB DVB: 2 x CineS2 Festplatten: 2x 1,5TB und 2x2TB
    OctopusNet V1 + Rack 4xS2 + 8xS2

  • Hallo
    Grad nochmal getested, da ich einen Bericht über das Problem (mit dem gleichen Board) gefunden hab.
    Dist-Upgrade --> Fehler wieder da (dachte schon wegen dem plymouth-Update)
    Bios-update auf F4 und siehe da, Fehler ist weg.
    Es gibt ja doch noch Wunder.
    Gruß

    VDR1 yaVDR 0.6: Gehäuse: OrigenAE X15e Board: Giada MG-C1037-SL Grafik: GT620 CPU: Celeron 1037U Ram: 2GB DVB: CineS2 Festplatte: 2x1TB
    VDR2 yaVDR 0.6: Gehäuse: Streacom F7C Board: Zotac Z68ITX-B-E Grafik: GT430 CPU: Pentium G630 Ram: 8GB DVB: CineS2 Festplatte: 30GB mSata + 500GB 2,5
    VDR3 yaVDR 0.6: Gehäuse: HP N36L Ram: 8GB DVB: 2 x CineS2 Festplatten: 2x 1,5TB und 2x2TB
    OctopusNet V1 + Rack 4xS2 + 8xS2

  • Da hat sich wohl auch was im Treiber getan (siehe letzte Zeile):


    Nvidia 290.03 (beta) for Linux x86/x86_64 released
    Release highlights since 285.05.09:


    Added support for the following GPU:
    GeForce 510
    Fixed a bug that prevented the driver from loading on some systems with integrated graphics.

    VDR1 yaVDR 0.6: Gehäuse: OrigenAE X15e Board: Giada MG-C1037-SL Grafik: GT620 CPU: Celeron 1037U Ram: 2GB DVB: CineS2 Festplatte: 2x1TB
    VDR2 yaVDR 0.6: Gehäuse: Streacom F7C Board: Zotac Z68ITX-B-E Grafik: GT430 CPU: Pentium G630 Ram: 8GB DVB: CineS2 Festplatte: 30GB mSata + 500GB 2,5
    VDR3 yaVDR 0.6: Gehäuse: HP N36L Ram: 8GB DVB: 2 x CineS2 Festplatten: 2x 1,5TB und 2x2TB
    OctopusNet V1 + Rack 4xS2 + 8xS2

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!