HuHu leutzzzzz,
habe vdr mit tt-premium c-2300 erfolgreich zum laufen bekommen, ohne finger brechen. Nun habe ich eine pvr350 zum testen verbaut. ich habe probleme und schon so viel rumgefrickelt das ich den überblick verloren haben.
als OS haben ich; Ubuntu Hardy sowie Debian Lenny und zu guter letzt CTVDR 6.2 probiert, irgendwie mag mich die Karte nicht.
Muss dazu sagen ich bin ein muffel und habe auch nicht so die ahnung und leider vieles anderes um die Ohr´n. über tips, tricks usw. wer ich euch sehr dankbar.
OS : ctvdr62
Multimedia : Hauppauge WinTV-PVR350
ctvdr:~# uname -r
2.6.18-6-486
ctvdr:~# lspci | grep Multimedia
0f:02.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
ctvdr:~# /etc/init.d/vdr start
Starting Linux Video Disk Recorder: vdr
Searching for plugins (VDR 1.6.0-2/1.6.0) (cache hit): wirbelscan pvr350.
ctvdr:~# lsmod | grep dvb
saa7134_dvb 13828 0
dvb_pll 14340 1 saa7134_dvb
mt352 6404 1 saa7134_dvb
saa7134 107104 1 saa7134_dvb
video_buf_dvb 6276 1 saa7134_dvb
dvb_core 70184 1 video_buf_dvb
video_buf 22532 3 saa7134_dvb,saa7134,video_buf_dvb
nxt200x 12292 1 saa7134_dvb
tda1004x 13700 1 saa7134_dvb
firmware_class 9472 4 saa7134_dvb,nxt200x,tda1004x,ivtv
i2c_core 19472 16 saa7134_dvb,dvb_pll,mt352,saa7134,ir_kbd_i2c,nxt200x,tda1004x,saa717x,msp3400,saa7127,saa7115,tuner,ivtv,i2c_algo_bit,tveeprom,i2c_i801
ctvdr:~# lsmod | grep ivtv
ivtv_fb 27108 2
ivtv 153360 3 ivtv_fb
firmware_class 9472 4 saa7134_dvb,nxt200x,tda1004x,ivtv
i2c_algo_bit 8584 1 ivtv
cx2341x 10372 1 ivtv
tveeprom 13968 1 ivtv
videodev 21120 4 saa7134,ivtv
v4l1_compat 12164 3 saa7134,ivtv,videodev
v4l2_common 20480 7 saa7134,msp3400,saa7115,tuner,ivtv,cx2341x,videodev
i2c_core 19472 16 saa7134_dvb,dvb_pll,mt352,saa7134,ir_kbd_i2c,nxt200x,tda1004x,saa717x,msp3400,saa7127,saa7115,tuner,ivtv,i2c_algo_bit,tveeprom,i2c_i801
ctvdr:~# dmesg | grep ivtv
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.2 (tagged release) loading
ivtv: Linux version: 2.6.18-6-486 mod_unload 486 REGPARM gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23415 based)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Autodetected Hauppauge WinTV PVR-350
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
ivtv0: Encoder revision: 0x02060039
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032.
ivtv0: Decoder revision: 0x02020023
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG
ivtv0: Registered device vbi8 for decoder VBI
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv0-osd: screen coords: [0 0] -> [720 576]
ivtv0-osd: original global alpha = 208
ivtv0-osd: current OSD state = 39
ivtv0-osd: new global alpha = 208 (1 255 0)
ivtv0-osd: framebuffer at 0xc9510000, mapped to 0xf9910000, size 1665k
ivtv0-osd: mode is 720x576x32, linelength=2880
ivtv0-osd: warning: mtrr_add() failed to add write combining region 0xc9400000-0xc9800000
ivtv0-osd warning: ivtvfb_set_par
ivtv0-osd: fb0: cx23415 TV out frame buffer device
ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-0018/ir0 [ivtv i2c driver #0]
ivtv0: All encoder VBI stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder VBI stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder VBI stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder VBI stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ctvdr:/usr/lib/vdr# ./svdrpsend.pl -d localhost -p 2001 plug wirbelscan s_cabl m_auto sr_auto
lässt vdr crashen!
plug wirbelscan via telnet und via vdradmin probiert kein unterschied!
ctvdr:~# cat /dev/video0 > uffnahme.mpg
bringt schnee, klar wenn keine aktuelle channels.conf vorliegt.
es sind sicher module geladen die nicht sein müssen wer sehr dankbar könnte mich mal jemander anbrüllen "man bis du blöd"
gruss
paul