Hallo, ich habe folgendes kleines Problemchen:
Ich habe nvram-wakeup mit FORCE_REBOOT="yes" eingerichtet und in Grub einen PowerOff Eintrag hinzugefügt. Der Reboot und das auswählen des PowerOff Eintrages funktioniert ordnungsgemäß, jedoch wählt Grub nach dem Aufwachen des VDRs immer wieder den PowerOff Eintrag.
Woran kann das liegen?
vdr-nvram-wakeup.conf:
Code
#
# Configuration file for the VDR nvram-wakeup shutdown hook
#
# This is NOT the nvram-wakeup configuration file, which you can find in
# /etc/nvram-wakeup.conf and which must be set in COMMANDLINE (see below),
# if your mainboard ins not detected automatically.
#
# Set to "yes" to enable nvram-wakeup for VDR
#
ENABLED="yes"
# Here you can specify additional command line parameters, that will be passed
# to nvram-wakeup.
#
# i.e.:
# COMMANDLINE="-I ecs_k7s5au" # mainboard of type K7S5au
# COMMANDLINE="-C /etc/nvram-wakeup.conf" # use config file
#
# see "man nvram-wakeup"
#
COMMANDLINE="-C /etc/nvram-wakeup.conf --directisa"
# If your mainboard needs to reboot before shutting down, set the command(s) to
# do this here. i.e.:
#
# SPECIALSHUTDOWN="lilo -R PowerOff ; shutdown -r now"
#
SPECIALSHUTDOWN="echo y | grub-reboot 2"
# To force a reboot whenever nvram-wakeup sets the time, independently of
# whether a reboot is required, enable this option.
#
FORCE_REBOOT="yes"
# If you want your VDR machine to wakeup in regular intervals (i.e. for
# updating EPG data), specify a day interval and a wakeup time:
#
REGULAR_DAYS=0 # 0=disabled, 1=each day, 2=each 2'nd day, 3=...
REGULAR_TIME=01:00 # HH:MM
Alles anzeigen
menu.lst:
Code
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default saved
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/hda1 ro BOOT_
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(single-user mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Debian GNU/Linux, kernel 2.6.18-4-486
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-4-486 root=/dev/hda1 ro BOOT_
initrd /boot/initrd.img-2.6.18-4-486
savedefault
title Debian GNU/Linux, kernel 2.6.18-4-486 (single-user mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-4-486 root=/dev/hda1 ro BOOT_ single
initrd /boot/initrd.img-2.6.18-4-486
savedefault
### END DEBIAN AUTOMAGIC KERNELS LIST
title PowerOff
root (hd0,0)
savedefault 0
halt
Alles anzeigen
Danke im Voraus,
Hannes