Hallo liebe Mitstreiter,
mein Ziel ist ist, einen VDR mit folgenden Komponenten aufzubauen: Hermes 651-P, Creative dxr3 mit ADV717x, Hauppauge WinTV BT848. Leider steht mir nur Kabelempfang zur Verfügung, Sat ist nicht drin.
Mein eigentliches Problem besteht in der Einbindung der Hauppauge Karte mit dem AnalogTV-Plugin. Sobald ich dieses Plugin installiere, gibt die dxr3 kein Bild auf dem Fernseher mehr aus. Entferne ich das AnalogTV-Plugin, kann ich mir das Menü auf dem Fernseher wieder ansehen.
Vielleicht beschreibe ich erst mal, wie ich vorgegangen bin. Als erstes sei gesagt, dass ich mit Windows recht gut umgehen kann, meine Linux-Kenntnisse allerdings nicht so gut sind.
[list=1]
[*]Installation des VDR mit der c't VDR 1.00
[*]In der /etc/lilo.conf die apend-Zeile bearbeiten: apm=power-off noapic acpi=off rausnehmen und mit lilo die Änderungen durchführen. Wenn ich diese Änderungen nicht mache, bekomme ich beim Booten eine Fehlermeldung beim Zuweisen der IRQs sobald ich die Hauppauge-Karte eingebaut habe (No IRQ known for interrupt pin A of device 00:0e0. Please try using pci=biosirq). Dieses Problem ist wohl beim Debian-Kernel in Verbindung mit SIS-Chipsatz bekannt, lässt sich bei mir aber auch nicht durch pci=biosirq beheben, es hängt wohl irgendwie mit der (Nicht-)Vergabe der IRQs des BIOS zusammen. Jedenfalls läuft es ohne jeglich Parameter in der append-Zeile.
[*]elchiimposdac3-sources.list vom neuem Repository eingepflegt und mit apt-get update und apt-get upgrade installiert.
[*]dxr3-Plugin mit apt-get install vdr-plugin-dxr3 installiert, den richtigen Block in der /etc/modutils/em8300 auskommentiert und mit update-modules dauerhaft erzeugt => Menü auch nach Neustart noch da
[*]Kernel-Update durchgeführt: apt-get install kernel-image-2.4.23-ctvdr-1, danach wieder apt-get update und apt-get upgrade, zusätzlich apt-get install dvb-driver-2.4.23-ctvdr-1 und apt-get install lirc-modules-2.4.23-ctvdr-1
[*]nach Neustart kein Menü mehr von dxr3. In der Zeile /etc/modutils/em8300 fehlte em8300.uc nicht, das ganze em8300-Paket war nicht mehr installiert. Also mit apt-get install em8300-modules-2.4.23-ctvdr-1 nachinstalliert. => Menü wieder da!
[*]Mit apt-get install vdr-analogtv das AnalogTV-Plugin installiert.
[*]modprobe bttv, in /var/log/message hagelt es keine Fehlermeldungen
[*]VDR und DVB-Treiber entladen: /etc/init.d/vdr stop und modprobe -r dvb-ttpci
[*]modprobe -r bttv, danach wieder modprobe bttv
[*]Aus dem AnalogTV-Plugin die channels.conf für ISH-NRW in /etc/vdr/channels.conf kopiert
[*]/etc/vdr/ca.conf um die Zeile 32001 analogTV erweitert
[*]/etc/init.d/vdr start
[*]Das Bild auf dem Fernseher zuckt zwar, aber kein Menü ist zu sehen
[*]Auf der vdr-console die Fehlermeldung msp3400: thread: no carrier scan (weder das VDRPortal noch google helfen mir bei der Problembehebung weiter)
[*]nach apt-get remove vdr-analogtv ist das Menü wieder da
[/list=1]
Wird diese Konstellation aus dxr3 und Hauppauge BT848 überhaupt unterstützt? Hat das jemand so laufen?
Oder wäre es sehr viel sinnvoller auch im Hinblick auf die Kanal-Wechsel-Problematik sich eine Hauppauge PVR 250 zuzulegen? Hat das jemand am laufen?
Oder funktioniert es nur mit dvb-c-Karte und PVR 250?
Oder was noch viel besser wäre: Wie kann ich das Problem mit dem no carrier scan lösen? Helfen Euch irgendwelche Konfigurations-Dateien? Poste ich gerne.
Vielen Dank schon mal für Eure Hilfe!
Christian
Hier erst mal die Log-Datei:
/var/log/messages
Feb 8 18:19:45 vdr syslogd 1.4.1#10: restart.
Feb 8 18:19:46 vdr kernel: klogd 1.4.1#10, log source = /proc/kmsg started.
Feb 8 18:19:46 vdr kernel: Inspecting /boot/System.map-2.4.23-ctvdr-1
Feb 8 18:19:46 vdr kernel: Loaded 20854 symbols from /boot/System.map-2.4.23-ctvdr-1.
Feb 8 18:19:46 vdr kernel: Symbols match kernel version 2.4.23.
Feb 8 18:19:46 vdr kernel: Loaded 302 symbols from 17 modules.
Feb 8 18:19:46 vdr kernel: Linux version 2.4.23-ctvdr-1 (root@blackvdr.localdomain) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Mon Jan 19 19:40:43 CET 2004
Feb 8 18:19:46 vdr kernel: BIOS-provided physical RAM map:
Feb 8 18:19:46 vdr kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 8 18:19:46 vdr kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 8 18:19:46 vdr kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb 8 18:19:46 vdr kernel: BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
Feb 8 18:19:46 vdr kernel: BIOS-e820: 000000001dff0000 - 000000001dff8000 (ACPI data)
Feb 8 18:19:46 vdr kernel: BIOS-e820: 000000001dff8000 - 000000001e000000 (ACPI NVS)
Feb 8 18:19:46 vdr kernel: BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
Feb 8 18:19:46 vdr kernel: BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Feb 8 18:19:46 vdr kernel: BIOS-e820: 00000000ffee0000 - 00000000fff0ffff (reserved)
Feb 8 18:19:46 vdr kernel: BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Feb 8 18:19:46 vdr kernel: 0MB HIGHMEM available.
Feb 8 18:19:46 vdr kernel: 479MB LOWMEM available.
Feb 8 18:19:46 vdr kernel: found SMP MP-table at 000fb9a0
Feb 8 18:19:46 vdr kernel: hm, page 000fb000 reserved twice.
Feb 8 18:19:46 vdr kernel: hm, page 000fc000 reserved twice.
Feb 8 18:19:46 vdr kernel: hm, page 000f5000 reserved twice.
Feb 8 18:19:46 vdr kernel: hm, page 000f6000 reserved twice.
Feb 8 18:19:46 vdr kernel: On node 0 totalpages: 122864
Feb 8 18:19:46 vdr kernel: zone(0): 4096 pages.
Feb 8 18:19:46 vdr kernel: zone(1): 118768 pages.
Feb 8 18:19:46 vdr kernel: zone(2): 0 pages.
Feb 8 18:19:46 vdr kernel: ACPI: RSDP (v000 AMI ) @ 0x000f9e60
Feb 8 18:19:46 vdr kernel: ACPI: RSDT (v001 AMIINT SiS645XX 0x00000010 MSFT 0x0100000b) @ 0x1dff0000
Feb 8 18:19:46 vdr kernel: ACPI: FADT (v001 AMIINT SiS645XX 0x00000011 MSFT 0x0100000b) @ 0x1dff0030
Feb 8 18:19:47 vdr kernel: ACPI: MADT (v001 AMIINT SiS645XX 0x00001000 MSFT 0x0100000b) @ 0x1dff00c0
Feb 8 18:19:47 vdr kernel: ACPI: DSDT (v001 SiS 645 0x00001000 MSFT 0x0100000d) @ 0x00000000
Feb 8 18:19:47 vdr kernel: ACPI: Local APIC address 0xfee00000
Feb 8 18:19:47 vdr kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Feb 8 18:19:47 vdr kernel: Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
Feb 8 18:19:47 vdr kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
Feb 8 18:19:47 vdr kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
Feb 8 18:19:47 vdr kernel: IOAPIC[0]: Assigned apic_id 2
Feb 8 18:19:47 vdr kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
Feb 8 18:19:47 vdr kernel: ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
Feb 8 18:19:47 vdr kernel: ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3])
Feb 8 18:19:47 vdr kernel: ACPI BALANCE SET
Feb 8 18:19:47 vdr kernel: Using ACPI (MADT) for SMP configuration information
Feb 8 18:19:47 vdr kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=302
Feb 8 18:19:47 vdr kernel: Initializing CPU#0
Feb 8 18:19:47 vdr kernel: Detected 2408.597 MHz processor.
Feb 8 18:19:47 vdr kernel: Console: colour VGA+ 80x25
Feb 8 18:19:47 vdr kernel: Calibrating delay loop... 4810.34 BogoMIPS
Feb 8 18:19:47 vdr kernel: Memory: 479976k/491456k available (1421k kernel code, 11092k reserved, 621k data, 148k init, 0k highmem)
Feb 8 18:19:47 vdr kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Feb 8 18:19:47 vdr kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Feb 8 18:19:47 vdr kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Feb 8 18:19:47 vdr kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 8 18:19:47 vdr kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 8 18:19:47 vdr kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Feb 8 18:19:47 vdr kernel: CPU: L2 cache: 512K
Feb 8 18:19:47 vdr kernel: Intel machine check architecture supported.
Feb 8 18:19:47 vdr kernel: Intel machine check reporting enabled on CPU#0.
Feb 8 18:19:47 vdr kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
Feb 8 18:19:47 vdr kernel: Enabling fast FPU save and restore... done.
Feb 8 18:19:47 vdr kernel: Enabling unmasked SIMD FPU exception support... done.
Feb 8 18:19:47 vdr kernel: Checking 'hlt' instruction... OK.
Feb 8 18:19:47 vdr kernel: POSIX conformance testing by UNIFIX
Feb 8 18:19:47 vdr kernel: enabled ExtINT on CPU#0
Feb 8 18:19:47 vdr kernel: ESR value before enabling vector: 00000000
Feb 8 18:19:47 vdr kernel: ESR value after enabling vector: 00000000
Feb 8 18:19:47 vdr kernel: ENABLING IO-APIC IRQs
Feb 8 18:19:47 vdr kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Feb 8 18:19:47 vdr kernel: Using local APIC timer interrupts.
Feb 8 18:19:47 vdr kernel: calibrating APIC timer ...
Feb 8 18:19:47 vdr kernel: ..... CPU clock speed is 2408.6415 MHz.
Feb 8 18:19:47 vdr kernel: ..... host bus clock speed is 133.8132 MHz.
Feb 8 18:19:47 vdr kernel: cpu: 0, clocks: 1338132, slice: 669066
Feb 8 18:19:47 vdr kernel: CPU0<T0:1338128,T1:669056,D:6,S:669066,C:1338132>
Feb 8 18:19:47 vdr kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Feb 8 18:19:47 vdr kernel: mtrr: detected mtrr type: Intel
Feb 8 18:19:47 vdr kernel: ACPI: Subsystem revision 20031002
Feb 8 18:19:47 vdr kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
Feb 8 18:19:47 vdr kernel: PCI: Using configuration type 1
Feb 8 18:19:47 vdr kernel: ACPI: Interpreter enabled
Feb 8 18:19:47 vdr kernel: ACPI: Using IOAPIC for interrupt routing
Feb 8 18:19:47 vdr kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
Feb 8 18:19:47 vdr kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Feb 8 18:19:47 vdr kernel: PCI: Probing PCI hardware (bus 00)
Feb 8 18:19:47 vdr kernel: ACPI: Power Resource [URP1] (off)
Feb 8 18:19:47 vdr kernel: ACPI: Power Resource [URP2] (off)
Feb 8 18:19:47 vdr kernel: ACPI: Power Resource [FDDP] (off)
Feb 8 18:19:47 vdr kernel: ACPI: Power Resource [LPTP] (off)
Feb 8 18:19:47 vdr kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 7 11 12 14 15)
Feb 8 18:19:47 vdr kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 *11 12 14 15)
Feb 8 18:19:47 vdr kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 *11 12 14 15)
Feb 8 18:19:47 vdr kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 *11 12 14 15)
Feb 8 18:19:47 vdr kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 11 12 14 15)
Feb 8 18:19:47 vdr kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 11 12 14 15)
Feb 8 18:19:47 vdr kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 11 12 14 15)
Feb 8 18:19:47 vdr kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 7 11 12 14 15)
Feb 8 18:19:47 vdr kernel: PCI: Probing PCI hardware
Feb 8 18:19:47 vdr kernel: testing the IO APIC.......................
Feb 8 18:19:47 vdr kernel:
Feb 8 18:19:47 vdr kernel: .................................... done.
Feb 8 18:19:47 vdr kernel: PCI: Using ACPI for IRQ routing
Feb 8 18:19:47 vdr kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Feb 8 18:19:47 vdr kernel: Linux NET4.0 for Linux 2.4
Feb 8 18:19:47 vdr kernel: Based upon Swansea University Computer Society NET3.039
Feb 8 18:19:47 vdr kernel: Initializing RT netlink socket
Feb 8 18:19:47 vdr kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Feb 8 18:19:47 vdr kernel: apm: overridden by ACPI.
Feb 8 18:19:47 vdr kernel: Starting kswapd
Feb 8 18:19:47 vdr kernel: VFS: Disk quotas vdquot_6.5.1
Feb 8 18:19:47 vdr kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Feb 8 18:19:47 vdr kernel: devfs: boot_options: 0x0
Feb 8 18:19:47 vdr kernel: pty: 256 Unix98 ptys configured
Feb 8 18:19:47 vdr kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
Feb 8 18:19:47 vdr kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Feb 8 18:19:47 vdr kernel: Real Time Clock Driver v1.10e
Feb 8 18:19:47 vdr kernel: FDC 0 is a post-1991 82077
Feb 8 18:19:47 vdr kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Feb 8 18:19:47 vdr kernel: loop: loaded (max 8 devices)
Feb 8 18:19:47 vdr kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Feb 8 18:19:47 vdr kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 8 18:19:47 vdr kernel: SIS5513: IDE controller at PCI slot 00:02.5
Feb 8 18:19:47 vdr kernel: SIS5513: chipset revision 0
Feb 8 18:19:47 vdr kernel: SIS5513: not 100%% native mode: will probe irqs later
Feb 8 18:19:47 vdr kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
Feb 8 18:19:47 vdr kernel: ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
Feb 8 18:19:47 vdr kernel: ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Feb 8 18:19:47 vdr kernel: hda: SAMSUNG SV1204H, ATA DISK drive
Feb 8 18:19:47 vdr kernel: blk: queue c035e880, I/O limit 4095Mb (mask 0xffffffff)
Feb 8 18:19:47 vdr kernel: hdc: DV-516D 0106, ATAPI CD/DVD-ROM drive
Feb 8 18:19:47 vdr kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 8 18:19:47 vdr kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 8 18:19:47 vdr kernel: hda: attached ide-disk driver.
Feb 8 18:19:47 vdr kernel: hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(100)
Feb 8 18:19:47 vdr kernel: Partition check:
Feb 8 18:19:47 vdr kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Feb 8 18:19:47 vdr kernel: SCSI subsystem driver Revision: 1.00
Feb 8 18:19:47 vdr kernel: Initializing Cryptographic API
Feb 8 18:19:47 vdr kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Feb 8 18:19:47 vdr kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Feb 8 18:19:47 vdr kernel: TCP: Hash tables configured (established 32768 bind 32768)
Feb 8 18:19:47 vdr kernel: Linux IP multicast router 0.06 plus PIM-SM
Feb 8 18:19:47 vdr kernel: RAMDISK: cramfs filesystem found at block 0
Feb 8 18:19:47 vdr kernel: RAMDISK: Loading 2780 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^Hdone.
Feb 8 18:19:47 vdr kernel: Freeing initrd memory: 2780k freed
Feb 8 18:19:47 vdr kernel: VFS: Mounted root (cramfs filesystem).
Feb 8 18:19:47 vdr kernel: Freeing unused kernel memory: 148k freed
Feb 8 18:19:47 vdr kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Feb 8 18:19:47 vdr kernel: Journalled Block Device driver loaded
Feb 8 18:19:47 vdr kernel: kjournald starting. Commit interval 5 seconds
Feb 8 18:19:47 vdr kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 8 18:19:47 vdr kernel: Adding Swap: 995988k swap-space (priority -1)
Feb 8 18:19:47 vdr kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Feb 8 18:19:47 vdr kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
Feb 8 18:19:47 vdr kernel: parport0: irq 7 detected
Feb 8 18:19:47 vdr kernel: lp0: using parport0 (polling).
Feb 8 18:19:47 vdr kernel: 8139too Fast Ethernet driver 0.9.26
Feb 8 18:19:47 vdr kernel: eth0: RealTek RTL8139 at 0xde8dcf00, 00:0c:76:a3:5b:79, IRQ 17
Feb 8 18:19:47 vdr kernel: hdc: attached ide-scsi driver.
Feb 8 18:19:47 vdr kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Feb 8 18:19:47 vdr kernel: Vendor: TEAC Model: DV-516D Rev: 1.06
Feb 8 18:19:47 vdr kernel: Type: CD-ROM ANSI SCSI revision: 02
Feb 8 18:19:47 vdr kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Feb 8 18:19:47 vdr kernel: lirc_serial: auto-detected active high receiver
Feb 8 18:19:47 vdr kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Feb 8 18:19:47 vdr kernel: agpgart: Maximum main memory to use for agp memory: 409M
Feb 8 18:19:47 vdr kernel: agpgart: Detected SiS 651 chipset
Feb 8 18:19:47 vdr kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Feb 8 18:19:47 vdr kernel: Intel 810 + AC97 Audio, version 0.24, 20:05:11 Jan 19 2004
Feb 8 18:19:47 vdr kernel: i810: SiS 7012 found at IO 0xd800 and 0xdc00, MEM 0x0000 and 0x0000, IRQ 18
Feb 8 18:19:47 vdr kernel: i810_audio: Audio Controller supports 6 channels.
Feb 8 18:19:47 vdr kernel: i810_audio: Defaulting to base 2 channel mode.
Feb 8 18:19:47 vdr kernel: i810_audio: Resetting connection 0
Feb 8 18:19:47 vdr kernel: ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
Feb 8 18:19:47 vdr kernel: i810_audio: AC'97 codec 0, new EID value = 0x05c7
Feb 8 18:19:47 vdr kernel: i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
Feb 8 18:19:47 vdr kernel: Linux Kernel Card Services 3.1.22
Feb 8 18:19:47 vdr kernel: options: [pci] [cardbus] [pm]
Feb 8 18:19:47 vdr kernel: ds: no socket drivers loaded!
Feb 8 18:19:47 vdr kernel: unloading Kernel Card Services
Feb 8 18:19:47 vdr kernel: Linux Kernel Card Services 3.1.22
Feb 8 18:19:47 vdr kernel: options: [pci] [cardbus] [pm]
Feb 8 18:19:47 vdr kernel: PCI: Enabling device 00:0e.1 (0000 -> 0002)
Feb 8 18:19:47 vdr kernel: PCI: Enabling device 00:0e.0 (0000 -> 0002)
Feb 8 18:19:47 vdr kernel: Yenta IRQ list 0c80, PCI irq17
Feb 8 18:19:47 vdr kernel: Socket status: 30000006
Feb 8 18:19:47 vdr kernel: Yenta IRQ list 0c80, PCI irq17
Feb 8 18:19:47 vdr kernel: Socket status: 30000006
Feb 8 18:19:47 vdr kernel: kjournald starting. Commit interval 5 seconds
Feb 8 18:19:47 vdr kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Feb 8 18:19:47 vdr kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 8 18:19:47 vdr kernel: usb.c: registered new driver usbdevfs
Feb 8 18:19:47 vdr kernel: usb.c: registered new driver hub
Feb 8 18:19:47 vdr kernel: usb-uhci.c: $Revision: 1.275 $ time 20:06:49 Jan 19 2004
Feb 8 18:19:47 vdr kernel: usb-uhci.c: High bandwidth mode enabled
Feb 8 18:19:47 vdr kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Feb 8 18:19:47 vdr kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
Feb 8 18:19:47 vdr kernel: usb.c: deregistering driver usbdevfs
Feb 8 18:19:47 vdr kernel: usb.c: deregistering driver hub
Feb 8 18:19:47 vdr kernel: usb.c: registered new driver usbdevfs
Feb 8 18:19:47 vdr kernel: usb.c: registered new driver hub
Feb 8 18:19:47 vdr kernel: usb-uhci.c: $Revision: 1.275 $ time 20:06:49 Jan 19 2004
Feb 8 18:19:47 vdr kernel: usb-uhci.c: High bandwidth mode enabled
Feb 8 18:19:47 vdr kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Feb 8 18:19:47 vdr kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
Feb 8 18:19:47 vdr kernel: usb.c: deregistering driver usbdevfs
Feb 8 18:19:47 vdr kernel: usb.c: deregistering driver hub
Feb 8 18:19:49 vdr kernel: Linux video capture interface: v1.00
Feb 8 18:19:51 vdr vdr[471]: VDR version 1.2.6 started
Feb 8 18:19:51 vdr vdr[471]: loading plugin: /usr/lib/vdr/plugins/libvdr-analogtv.so.1.2.6
Feb 8 18:19:52 vdr vdr[471]: loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.2.6
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/setup.conf
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/sources.conf
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/diseqc.conf
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/channels.conf
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/commands.conf
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/reccmds.conf
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/svdrphosts.conf
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/ca.conf
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/remote.conf
Feb 8 18:19:53 vdr vdr[471]: loading /etc/vdr/keymacros.conf
Feb 8 18:19:53 vdr kernel: Linux video capture interface: v1.00
Feb 8 18:19:55 vdr vdr[471]: no DVB device found
Feb 8 18:19:55 vdr vdr[471]: initializing plugin: analogtv (0.9.25): Watch analogue TV
Feb 8 18:19:55 vdr vdr[471]: initializing plugin: dxr3 (0.2.2): DXR3-MPEG decoder plugin
Feb 8 18:19:55 vdr kernel: i2c-core.o: i2c core module
Feb 8 18:19:55 vdr kernel: i2c-algo-bit.o: i2c bit algorithm module
Feb 8 18:19:55 vdr kernel: i2c-core.o: driver ADV717X video encoder driver registered.
Feb 8 18:19:56 vdr kernel: em8300: EM8300 8300 (rev 2) bus: 0, devfn: 56, irq: 18, memory: 0xdfe00000.
Feb 8 18:19:56 vdr kernel: em8300: mapped-memory at 0xde93d000
Feb 8 18:19:56 vdr kernel: em8300: using MTRR
Feb 8 18:19:56 vdr kernel: em8300: 1 EM8300 card(s) found.
Feb 8 18:19:56 vdr kernel: em8300_main.o: Chip revision: 2
Feb 8 18:19:56 vdr kernel: adv717x.o: ADV7175A chip detected
Feb 8 18:19:56 vdr kernel: i2c-core.o: client [ADV7175A chip] registered to adapter [EM8300 I2C bus 1](pos. 0).
Feb 8 18:19:56 vdr kernel: adv717x.o: Configuring for PAL 60
Feb 8 18:19:56 vdr kernel: i2c-core.o: adapter EM8300 I2C bus 1 registered as adapter 0.
Feb 8 18:19:56 vdr kernel: i2c-core.o: adapter EM8300 I2C bus 2 registered as adapter 1.
Feb 8 18:19:57 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:19:57 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:19:57 vdr kernel: em8300: Microcode version 0x29 loaded
Feb 8 18:19:58 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:19:58 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:19:58 vdr kernel: em8300: Microcode version 0x29 loaded
Feb 8 18:19:58 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:19:59 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:20:00 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:20:00 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:20:00 vdr kernel: em8300: Microcode version 0x29 loaded
Feb 8 18:20:00 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:20:01 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:20:02 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:20:02 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:20:02 vdr kernel: em8300: Microcode version 0x29 loaded
Feb 8 18:20:02 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:20:02 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:20:02 vdr vdr[471]: setting primary device to 1
Feb 8 18:20:02 vdr vdr[471]: device 1 has no MPEG decoder
Feb 8 18:20:02 vdr vdr[471]: trying device number 2 instead
Feb 8 18:20:02 vdr vdr[471]: setting primary device to 2
Feb 8 18:20:02 vdr vdr[471]: SVDRP listening on port 2001
Feb 8 18:20:02 vdr vdr[471]: starting plugin: analogtv
Feb 8 18:20:02 vdr vdr[471]: starting plugin: dxr3
Feb 8 18:20:02 vdr vdr[471]: switching to channel 1
Feb 8 18:20:02 vdr kernel: Linux video capture interface: v1.00
Feb 8 18:20:02 vdr kernel: bttv: driver version 0.7.108 loaded
Feb 8 18:20:02 vdr kernel: bttv: using 4 buffers with 2080k (8320k total) for capture
Feb 8 18:20:02 vdr kernel: bttv: Bt8xx card found (0).
Feb 8 18:20:02 vdr kernel: bttv0: Bt848 (rev 18) at 00:06.0, irq: 17, latency: 64, mmio: 0xdfaff000
Feb 8 18:20:02 vdr kernel: bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
Feb 8 18:20:02 vdr kernel: i2c-core.o: adapter bt848 #0 registered as adapter 2.
Feb 8 18:20:02 vdr kernel: bttv0: detected by eeprom: Hauppauge (bt848) [card=2]
Feb 8 18:20:02 vdr kernel: bttv0: Hauppauge eeprom: model=60324, tuner=Philips FM1216 (5), radio=yes
Feb 8 18:20:02 vdr kernel: bttv0: using tuner=5
Feb 8 18:20:02 vdr kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found
Feb 8 18:20:02 vdr kernel: i2c-core.o: driver i2c msp3400 driver registered.
Feb 8 18:20:02 vdr kernel: msp34xx: init: chip=MSP3400C-C6
Feb 8 18:20:02 vdr kernel: msp3400: daemon started
Feb 8 18:20:02 vdr kernel: i2c-core.o: client [MSP3400C-C6] registered to adapter [bt848 #0](pos. 0).
Feb 8 18:20:02 vdr kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Feb 8 18:20:02 vdr kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Feb 8 18:20:03 vdr kernel: tvaudio: TV audio decoder + audio/video mux driver
Feb 8 18:20:03 vdr kernel: tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
Feb 8 18:20:03 vdr kernel: i2c-core.o: driver generic i2c audio driver registered.
Feb 8 18:20:03 vdr kernel: i2c-core.o: driver i2c TV tuner driver registered.
Feb 8 18:20:03 vdr kernel: tuner: chip found @ 0xc2
Feb 8 18:20:03 vdr kernel: tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Feb 8 18:20:03 vdr kernel: i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [bt848 #0](pos. 1).
Feb 8 18:20:03 vdr kernel: bttv0: registered device video0
Feb 8 18:20:03 vdr kernel: bttv0: registered device vbi0
Feb 8 18:20:03 vdr kernel: bttv0: registered device radio0
Feb 8 18:20:03 vdr kernel: msp3400: thread: no carrier scan
Feb 8 18:20:03 vdr kernel: msp3400: thread: no carrier scan
Feb 8 18:27:25 vdr vdr[578]: VDR version 1.2.6 started
Feb 8 18:27:25 vdr vdr[578]: loading plugin: /usr/lib/vdr/plugins/libvdr-analogtv.so.1.2.6
Feb 8 18:27:25 vdr vdr[578]: loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.2.6
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/setup.conf
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/sources.conf
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/diseqc.conf
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/channels.conf
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/commands.conf
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/reccmds.conf
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/svdrphosts.conf
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/ca.conf
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/remote.conf
Feb 8 18:27:25 vdr vdr[578]: loading /etc/vdr/keymacros.conf
Feb 8 18:27:25 vdr vdr[578]: no DVB device found
Feb 8 18:27:25 vdr vdr[578]: initializing plugin: analogtv (0.9.25): Watch analogue TV
Feb 8 18:27:25 vdr vdr[578]: initializing plugin: dxr3 (0.2.2): DXR3-MPEG decoder plugin
Feb 8 18:27:26 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:27:26 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:27:26 vdr kernel: em8300: Microcode version 0x29 loaded
Feb 8 18:27:26 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:27:27 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:27:28 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:27:28 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:27:28 vdr kernel: em8300: Microcode version 0x29 loaded
Feb 8 18:27:28 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:27:29 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:27:30 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:27:30 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:27:30 vdr kernel: em8300: Microcode version 0x29 loaded
Feb 8 18:27:30 vdr kernel: adv717x.o: Configuring for PAL
Feb 8 18:27:30 vdr kernel: em8300_audio.o: Analog audio enabled
Feb 8 18:27:30 vdr vdr[578]: setting primary device to 1
Feb 8 18:27:30 vdr vdr[578]: device 1 has no MPEG decoder
Feb 8 18:27:30 vdr vdr[578]: trying device number 2 instead
Feb 8 18:27:30 vdr vdr[578]: setting primary device to 2
Feb 8 18:27:30 vdr vdr[578]: SVDRP listening on port 2001
Feb 8 18:27:30 vdr vdr[578]: starting plugin: analogtv
Feb 8 18:27:30 vdr vdr[578]: starting plugin: dxr3
Feb 8 18:27:30 vdr vdr[578]: switching to channel 1
Feb 8 18:27:31 vdr kernel: msp3400: thread: no carrier scan
Feb 8 18:39:45 vdr -- MARK --
Feb 8 18:59:45 vdr -- MARK --
Feb 8 19:19:45 vdr -- MARK --
