Hallo,
Habe bei HD-Sendern überhaupt keinen Ton.
Das komische ist aber, dass bei allen SD-Sendern sowohl Digital als auch analog Ton funktioniert.
Bin nun sämliche Threads durch, und habe einige Einstellungen in der xine config probiert aber habe es bis jetzt noch nie soweit gebracht das ich bei HD-Sendern Ton habe.
Der Ton wird vom Mainboard zur Grafikkarte durchgeschleift.
(m3a-h hdmi zu Asus en9500gt)
System:
vdr-1.7.9
xineliboutput-cvs vom 29.08 mit df patch
xine-lib-1.2 vom 29.08 mit vdpau + df patches
alsa hab ich auch schon aktualisiert, hat nichts gebracht.
setup.conf:
xineliboutput.Audio.Compression = 100
xineliboutput.Audio.Delay = 0
xineliboutput.Audio.Driver = alsa
xineliboutput.Audio.Equalizer = 0 0 0 0 0 0 0 0 0 0
xineliboutput.Audio.Headphone = 0
xineliboutput.Audio.Port = hw:0,1
xineliboutput.Audio.SoftwareVolumeControl = 1
xineliboutput.Audio.Speakers = Pass Through
xineliboutput.Audio.Surround = 0
xineliboutput.Audio.Upmix = 0
xineliboutput.Audio.Visualization = none
Alles anzeigen
bei Audio.Port habe ich auch schon iec958 oder default probiert.
xine config:
# use A/52 dynamic range compression
# bool, default: 0
#audio.a52.dynamic_range:0
# downmix audio to 2 channel surround stereo
# bool, default: 0
#audio.a52.surround_downmix:0
# A/52 volume
# [0..200], default: 100
#audio.a52.level:100
# device used for mono output
# string, default: default
audio.device.alsa_default_device:plug:iec958
# device used for stereo output
# string, default: plug:front:default
audio.device.alsa_front_device:plug:iec958
# alsa mixer device
# string, default: PCM
#audio.device.alsa_mixer_name:PCM
# sound card can do mmap
# bool, default: 0
#audio.device.alsa_mmap_enable:0
# device used for 5.1-channel output
# string, default: iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
audio.device.alsa_passthrough_device:plug:iec958
# device used for 4-channel output
# string, default: plug:surround40:0
#audio.device.alsa_surround40_device:plug:surround40:0
# device used for 5.1-channel output
# string, default: plug:surround51:0
audio.device.alsa_surround51_device:plug:iec958
# speaker arrangement
# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1
audio.output.speaker_arrangement:Pass Through
# offset for digital passthrough
# numeric, default: 0
#audio.synchronization.passthrough_offset:0
# play audio even on slow/fast speeds
# bool, default: 0
#audio.synchronization.slow_fast_audio:0
# method to sync audio and video
# { metronom feedback resample }, default: 0
audio.synchronization.av_sync_method:resample
# always resample to this rate (0 to disable)
# numeric, default: 0
audio.synchronization.force_rate:48000
# enable resampling
# { auto off on }, default: 0
audio.synchronization.resample_mode:on
# startup audio volume
# [0..100], default: 50
#audio.volume.mixer_volume:50
# restore volume level at startup
# bool, default: 0
#audio.volume.remember_volume:0
Alles anzeigen
Entweder hab ich die Lösung überlesen, oder ich bin der einzige mit dem Problem.
Danke schonmal
Gruß
Johannes