VDR2DVD Hubertus Sandmann

Hoffmann110383 · 9. Mai 2005

Ich versuche schon seit 3 Tagen nach der Anleitung von Hubertus Sandmann mir die Tools zur erstellung von DVDs zu installieren. leider ohne erfolg ich bleib immer beim Transcode stehen da der da nicht weiter kommt und ich keine Ahnung hab worans liegt!! Habe die Anleitung genau befolgt und alle packete die in der Liste sind nachinstalliert!!!

Meine letzten zeilen aus dem make && make install
von transcode

E_OFFSET_BITS=64 -g -O2 -MT export_ffmpeg.lo -MD -MP -MF .deps/export_ffmpeg.Tpo -c export_ffmpeg.c -fPIC -DPIC -o .libs/export_ffmpeg.o
export_ffmpeg.c: In function `export_ffmpeg_init':
export_ffmpeg.c:677: error: structure has no member named `frame_rate'
export_ffmpeg.c:678: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:681: error: structure has no member named `frame_rate'
export_ffmpeg.c:682: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:685: error: structure has no member named `frame_rate'
export_ffmpeg.c:686: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:689: error: structure has no member named `frame_rate'
export_ffmpeg.c:690: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:693: error: structure has no member named `frame_rate'
export_ffmpeg.c:694: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:697: error: structure has no member named `frame_rate'
export_ffmpeg.c:698: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:701: error: structure has no member named `frame_rate'
export_ffmpeg.c:702: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:705: error: structure has no member named `frame_rate'
export_ffmpeg.c:706: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:712: error: structure has no member named `frame_rate'
export_ffmpeg.c:713: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:717: error: structure has no member named `frame_rate'
export_ffmpeg.c:718: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:735: error: structure has no member named `frame_rate'
export_ffmpeg.c:736: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:739: error: structure has no member named `frame_rate'
export_ffmpeg.c:740: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:743: error: structure has no member named `frame_rate'
export_ffmpeg.c:744: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:747: error: structure has no member named `frame_rate'
export_ffmpeg.c:748: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:751: error: structure has no member named `frame_rate'
export_ffmpeg.c:752: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:755: error: structure has no member named `frame_rate'
export_ffmpeg.c:756: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:759: error: structure has no member named `frame_rate'
export_ffmpeg.c:760: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:763: error: structure has no member named `frame_rate'
export_ffmpeg.c:764: error: structure has no member named `frame_rate_base'
make[2]: *** [export_ffmpeg.lo] Error 1
make[2]: Leaving directory `/video/author/transcode-0.6.14/export'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/video/author/transcode-0.6.14'
make: *** [all] Error 2

Kann jemand irgendwie helfen?

Hoffmann110383 · 9. Mai 2005

Bei FFMPEG kommt zwischendrinn falls es hilft mir zu helfen.

dsputil.c:3820: warning: assignment from incompatible pointer type
dsputil.c:3821: warning: assignment from incompatible pointer type
gcc -O3 -g -Wall -Wno-switch -DHAVE_AV_CONFIG_H -I.. -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_GNU_SOURCE -c -o motion_est.o motion_est.c
motion_est.c: In function `check_bidir_mv':
motion_est.c:1566: warning: unused variable `uvstride'
motion_est_template.c: In function `ff_get_mb_score':
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est_template.c: In function `hpel_motion_search':
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c: In function `check_input_motion':
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est.c:178: warning: `uvdxy' might be used uninitialized in this function
motion_est_template.c: In function `qpel_motion_search':

später kommt dann noch folgendes

/ffmpeg'/libavformat -I'/home/VDRDVD/ffmpeg'/libavcodec -DHAVE_AV_CONFIG_H `freetype-config --cflags` -c -o drawtext.o drawtext.c
gcc -g -o drawtext.so -shared drawtext.o `freetype-config --libs`
rm ppm.o null.o fish.o watermark.o
make[1]: Leaving directory `/home/VDRDVD/ffmpeg/vhook'
gcc '/home/VDRDVD/ffmpeg'/qt-faststart.c -o qt-faststart
make -C doc all
make[1]: Entering directory `/home/VDRDVD/ffmpeg/doc'
texi2html -monolithic -number ffmpeg-doc.texi
** `Invocation' is up for `FFmpeg formula evaluator', but has no menu entry for this node
** `Coding Rules' doesn't appear in menus
** `Developers Guide' is up for `Coding Rules', but has no menu entry for this node
** `CVS Policy' doesn't appear in menus
** `Developers Guide' is up for `CVS Policy', but has no menu entry for this node
** too much @tab (multitable has only 3 column(s)) (l. 639)
** too much @tab (multitable has only 3 column(s)) (l. 642)
** too much @tab (multitable has only 3 column(s)) (l. 644)
** too much @tab (multitable has only 3 column(s)) (l. 646)
** too much @tab (multitable has only 3 column(s)) (l. 651)
** too much @tab (multitable has only 3 column(s)) (l. 653)
** too much @tab (multitable has only 3 column(s)) (l. 662)
** too much @tab (multitable has only 3 column(s)) (l. 665)
** too much @tab (multitable has only 3 column(s)) (l. 669)
** too much @tab (multitable has only 3 column(s)) (l. 672)
** too much @tab (multitable has only 3 column(s)) (l. 674)
** too much @tab (multitable has only 3 column(s)) (l. 676)
** too much @tab (multitable has only 3 column(s)) (l. 678)
** too much @tab (multitable has only 3 column(s)) (l. 680)
** too much @tab (multitable has only 3 column(s)) (l. 682)
** too much @tab (multitable has only 3 column(s)) (l. 684)
** too much @tab (multitable has only 3 column(s)) (l. 686)
** too much @tab (multitable has only 3 column(s)) (l. 688)
** too much @tab (multitable has only 3 column(s)) (l. 691)
** too much @tab (multitable has only 3 column(s)) (l. 703)
** too much @tab (multitable has only 3 column(s)) (l. 705)
** too much @tab (multitable has only 3 column(s)) (l. 706)
** too much @tab (multitable has only 3 column(s)) (l. 707)
** too much @tab (multitable has only 3 column(s)) (l. 708)
** too much @tab (multitable has only 3 column(s)) (l. 709)
** too much @tab (multitable has only 3 column(s)) (l. 710)
** too much @tab (multitable has only 3 column(s)) (l. 711)
texi2html -monolithic -number faq.texi

Distribution ist Suse 9.3

dimitri · 11. Mai 2005

Hi,

welche version von ffmpeg setzt du ein ?

Auf einem AMD64 system hatte ich unter SuSE 9.3 keine
Probleme mit ffmpeg 0.4.9-pre1 und transcode 0.6.14

Gruss
Dimitri

Klema · 13. Mai 2005

Habe die gleichen Fehler wie oben genannt, benutze die CVS-Version von ffmpeg, welche ich mit Mühe kompiliert bekommen habe. Verzweifle allerdings am Transcode (0.6.14). System: Debian SID auf AMD64. Hat noch einer ne Idee?

cyrix20 · 14. Mai 2005

also ich für meinen Teil habe mir alle Programme die bei hubertus installiert werden als rpm besorgt bis auf vdrconfert und dann gings!!!

SvenS · 14. Mai 2005

Zitat

Original von Klema
Habe die gleichen Fehler wie oben genannt, benutze die CVS-Version von ffmpeg, welche ich mit Mühe kompiliert bekommen habe. Verzweifle allerdings am Transcode (0.6.14). System: Debian SID auf AMD64. Hat noch einer ne Idee?

Ja, was hindert dich transcode per apt-get zu installieren? So hab ich das bei meiner Sarge Installation auch gemacht, war der einfachste Weg und löst die Abhängigkeiten automatisch auf. Auch wenn ich sonst eher ein fReund vom selber kompilieren bin, bei solchen Monstern wie ffmpeg und transcode gehe ich lieber den einfachen Weg.

bye
Sven

Klema · 14. Mai 2005

Zitat

Original von SvenS
Ja, was hindert dich transcode per apt-get zu installieren? So hab ich das bei meiner Sarge Installation auch gemacht, war der einfachste Weg und löst die Abhängigkeiten automatisch auf. Auch wenn ich sonst eher ein fReund vom selber kompilieren bin, bei solchen Monstern wie ffmpeg und transcode gehe ich lieber den einfachen Weg...

Hab ja auf dem System zum Nachbearbeiten SID-AMD64 installiert. Und da gibt es leider kein Transcode-Paket (zumindest nicht in meiner Paketliste, auch nicht nach einem aktuelle Update). FFMpeg gibt es schon, das wäre auch nicht das Problem. Wollte nur nicht allein wegen Transcode wieder auf Sarge zurück, da heir die Probleme schon beim Installer anfangen (USB-Tastaturerkennung usw.) und ich mit Sid ein sonst stabil laufendes System hab. Sind da evtl. andere Paket-Quellen für die sources.list verfügbar?

hopsi · 14. Mai 2005

Hoffmann110383: Die Fehler treten wohl auf, weil diese Funktion im neuesten FFMpeg (IIRC seit 1. Mai) nicht mehr enthalten ist. Irgendwo auf google/groups hatte ich diese Info wegen gleichem Problem gefunden.

Verwende einfach eine ältere Version:
http://mplayerhq.hu/MPlayer/cvs/FFMpeg-20050430.tar.bz2

Aber da hätte ich auch gleich eine Frage: wie kann ich Einfluß nehmen auf die Auswahl der Szene, die im animierten DVD-Menü (Hauptmenü oder Hintergrund) abgespielt wird, nehmen? Mit

Christian

seti · 14. Mai 2005

Hallo Klema,

transcode gibt es als debain Packet (zumindest für i386) auf dem unoffiziellen repository von Christian Marillat. Einfach folgende Zeile in /etc/apt/sources.list einfügen:

deb ftp://ftp.nerim.net/debian-marillat/ unstable main

Gruß
seti

Klema · 14. Mai 2005

Danke, alles klar, werds einfach mal versuchen, obs unter amd64 läuft.

Klema · 14. Mai 2005

Hab noch ein Repository gefunden für amd64:

deb http://cyberspace.ucla.edu/marillat/ unstable main

werd ich mal probieren, da ist auch transcode dabei und auch die mjpegtools.

Klemens

JosefGierl · 8. Juli 2005

Hallo,
verzweifle auch gerade an transcode-0.6.14.

habs jetzt schon mit verschiedensten ffmpeg Versionen versucht:
- ffmpeg-cvs-20050708.tar
- FFMpeg-20050430.tar
- ffmpeg-0.4.9-pre1.tar

aber leider wird das nix.

Habs auch nach Hubertus Sandmann gemacht.

cd ffmpeg
./configure --prefix=/usr --enable-shared
make
make install

cd transcode
./configure --prefix=/usr
make
--> hier kommt der Fehler

Code

make  all-recursive
make[1]: Entering directory `/usr/local/src/transcode-0.6.14'
Making all in libxio
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/libxio'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/libxio'
Making all in docs
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/docs'
Making all in man
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/docs/man'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/docs/man'
Making all in html
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/docs/html'
Making all in .
make[4]: Entering directory `/usr/local/src/transcode-0.6.14/docs/html'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/usr/local/src/transcode-0.6.14/docs/html'
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/docs/html'
Making all in release-notes
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/docs/release-notes'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/docs/release-notes'
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/docs'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/docs'
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/docs'
Making all in contrib
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/contrib'
Making all in .
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/contrib'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/contrib'
Making all in pnmpvn
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/contrib/pnmpvn'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/contrib/pnmpvn'
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/contrib'
Making all in libdldarwin
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/libdldarwin'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/libdldarwin'
Making all in libsupport
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/libsupport'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/libsupport'
Making all in libioaux
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/libioaux'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/libioaux'
Making all in aclib
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/aclib'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/aclib'
Making all in avilib
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/avilib'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/avilib'
Making all in libac3
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/libac3'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/libac3'
Making all in libvo
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/libvo'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/libvo'
Making all in libmpeg2
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/libmpeg2'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/libmpeg2'
Making all in libdvenc
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/libdvenc'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/libdvenc'
Making all in bbmpeg
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/bbmpeg'
Making all in .
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/bbmpeg'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/bbmpeg'
Making all in tcmplex
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/bbmpeg/tcmplex'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/bbmpeg/tcmplex'
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/bbmpeg'
Making all in import
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/import'
Making all in nuv
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/import/nuv'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/import/nuv'
Making all in af6
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/import/af6'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/import/af6'
Making all in net
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/import/net'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/import/net'
Making all in v4l
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/import/v4l'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/import/v4l'
Making all in yuv
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/import/yuv'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/import/yuv'
make[3]: Entering directory `/usr/local/src/transcode-0.6.14/import'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/usr/local/src/transcode-0.6.14/import'
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/import'
Making all in export
make[2]: Entering directory `/usr/local/src/transcode-0.6.14/export'
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..  -D_REENTRANT -DMOD_PATH=\"/usr/lib/transcode\" -I.. -I../src -I../libac3 -I../avilib -I/usr/include -I../libvo -I../libioaux -I../libxio -I/usr/include    -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -MT export_ffmpeg.lo -MD -MP -MF ".deps/export_ffmpeg.Tpo" -c -o export_ffmpeg.lo export_ffmpeg.c; \
then mv -f ".deps/export_ffmpeg.Tpo" ".deps/export_ffmpeg.Plo"; else rm -f ".deps/export_ffmpeg.Tpo"; exit 1; fi
 gcc -DHAVE_CONFIG_H -I. -I. -I.. -D_REENTRANT -DMOD_PATH=\"/usr/lib/transcode\" -I.. -I../src -I../libac3 -I../avilib -I/usr/include -I../libvo -I../libioaux -I../libxio -I/usr/include -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -MT export_ffmpeg.lo -MD -MP -MF .deps/export_ffmpeg.Tpo -c export_ffmpeg.c  -fPIC -DPIC -o .libs/export_ffmpeg.o
export_ffmpeg.c: In function `export_ffmpeg_init':
export_ffmpeg.c:677: error: structure has no member named `frame_rate'
export_ffmpeg.c:678: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:681: error: structure has no member named `frame_rate'
export_ffmpeg.c:682: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:685: error: structure has no member named `frame_rate'
export_ffmpeg.c:686: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:689: error: structure has no member named `frame_rate'
export_ffmpeg.c:690: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:693: error: structure has no member named `frame_rate'
export_ffmpeg.c:694: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:697: error: structure has no member named `frame_rate'
export_ffmpeg.c:698: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:701: error: structure has no member named `frame_rate'
export_ffmpeg.c:702: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:705: error: structure has no member named `frame_rate'
export_ffmpeg.c:706: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:712: error: structure has no member named `frame_rate'
export_ffmpeg.c:713: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:717: error: structure has no member named `frame_rate'
export_ffmpeg.c:718: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:735: error: structure has no member named `frame_rate'
export_ffmpeg.c:736: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:739: error: structure has no member named `frame_rate'
export_ffmpeg.c:740: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:743: error: structure has no member named `frame_rate'
export_ffmpeg.c:744: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:747: error: structure has no member named `frame_rate'
export_ffmpeg.c:748: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:751: error: structure has no member named `frame_rate'
export_ffmpeg.c:752: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:755: error: structure has no member named `frame_rate'
export_ffmpeg.c:756: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:759: error: structure has no member named `frame_rate'
export_ffmpeg.c:760: error: structure has no member named `frame_rate_base'
export_ffmpeg.c:763: error: structure has no member named `frame_rate'
export_ffmpeg.c:764: error: structure has no member named `frame_rate_base'
make[2]: *** [export_ffmpeg.lo] Error 1
make[2]: Leaving directory `/usr/local/src/transcode-0.6.14/export'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/local/src/transcode-0.6.14'
make: *** [all] Error 2

Alles anzeigen

Mhm. Gibts eine Lösung für das Problem? Hab auch schon mal nach fertigen rpms gesucht, aber leider nix gefunden....

Mfg Josef

JosefGierl · 8. Juli 2005

Hallo,
komisch.

mit ffmpeg-0.4.9-pre1.tar hats jetzt geklappt. Warum? Egal! Haupsache es funkt.

Mfg Josef

VDR2DVD Hubertus Sandmann

Jetzt mitmachen!

Teilen

Benutzer online in diesem Thema