[SOLVED] Disecq 2.0 , 4 in 1 out

raccoon · 29. November 2015

Hi everyone,
I'm sorry to speak, via google traduction, but I am dunno ever German: / it might be funny My Config: VDR: 2.2.0 (from source with rpihddevice plugin) Hardware: RPI 2 & DVBSKY S960 OS : Raspbian jessie I have a problem with DiSEqC: on AA have Hotbird 13.0Eº on BB have astra 19.2Eº If I do not use DiSEqC, all channels OK, but with DiSEqC, many of them in OK, but others are not OK Example: Example : This channel works without DiSEqC:

Code

CANAL + with the DiSEqC, is not working, but I have a signal (vdr-plugin-femon) This channel works with and without Disecq [code] CANAL + SPORT 2 /etc/vdr/diseqc.conf

# Position A, option A S13e 11700 V 9750 TV W15 [E0 10 38 F0] W15 [E1 10 38 F0] W15 t S13e 99999 V 10600 tv W15 [E0 10 38 F1 ] W15 [E1 10 38 F1] W15 T S13e 11700 H 9750 t V W15 [E0 10 38 F2] W15 [E1 10 38 F2] W15 t S13e 99999 H 10600 t V W15 [E0 10 38 F3] W15 [E1 10 38 F3] W15 T # Position B, Option B S19.2E 11700 V 9750 TV W15 [E0 10 38 FC] W15 [E1 10 38 FC] W15 t S19.2E 99999 V 10600 tv W15 [E0 10 38 FD] W15 [E1 10 38 FD] W15 T S19.2E 11700 H 9750 t V W15 [E0 10 38 FE] W15 [E1 10 38 FE] W15 t S19.2E 99999 H 10600 t V W15 [E0 10 38 FF] W15 [E1 10 38 FF] W15 T Can be, my configuration is bad for Disecq, can you please help me? Can its polarization? H and V? Thanks, thanks a lot, merci beaucoup !!

MegaV0lt · 29. November 2015

Well maybe you try my config. Is perfect here. Pos A is 9°E and Pos B is 19,2°E

Code

# Full DiSEqC for 9°E and 19,2°E


S9E  11700 V  9750  t v W25 [E0 10 38 F0] W25 [E1 10 38 F0] W25 A W25 t
S9E  99999 V 10600  t v W25 [E0 10 38 F1] W25 [E1 10 38 F1] W25 A W25 T
S9E  11700 H  9750  t V W25 [E0 10 38 F2] W25 [E1 10 38 F2] W25 A W25 t
S9E  99999 H 10600  t V W25 [E0 10 38 F3] W25 [E1 10 38 F3] W25 A W25 T


S19.2E  11700 V  9750  t v W25 [E0 10 38 F4] W25 [E1 10 38 F4] W25 B W25 t
S19.2E  99999 V 10600  t v W25 [E0 10 38 F5] W25 [E1 10 38 F5] W25 B W25 T
S19.2E  11700 H  9750  t V W25 [E0 10 38 F6] W25 [E1 10 38 F6] W25 B W25 t
S19.2E  99999 H 10600  t V W25 [E0 10 38 F7] W25 [E1 10 38 F7] W25 B W25 T

Alles anzeigen

Just change the S9E to your S13E

raccoon · 29. November 2015

Hi MegaVolt,

Thanks for taking some time on my thread,

i tried your config (replacing for 13E):

Code

S13E 11700 V 9750 t v W25 [E0 10 38 F0] W25 [E1 10 38 F0] W25 A W25 t
S13E 99999 V 10600 t v W25 [E0 10 38 F1] W25 [E1 10 38 F1] W25 A W25 T
S13E 11700 H 9750 t V W25 [E0 10 38 F2] W25 [E1 10 38 F2] W25 A W25 t
S13E 99999 H 10600 t V W25 [E0 10 38 F3] W25 [E1 10 38 F3] W25 A W25 T


S19.2E 11700 V 9750 t v W25 [E0 10 38 F4] W25 [E1 10 38 F4] W25 B W25 t
S19.2E 99999 V 10600 t v W25 [E0 10 38 F5] W25 [E1 10 38 F5] W25 B W25 T
S19.2E 11700 H 9750 t V W25 [E0 10 38 F6] W25 [E1 10 38 F6] W25 B W25 t
S19.2E 99999 H 10600 t V W25 [E0 10 38 F7] W25 [E1 10 38 F7] W25 B W25 T

And now, everything on Hotbird 13 works fine, but i completely lost 19ºE.

EDIT :

I took my old config for 19 and the new config for 13 and all works fine now.

The winning config:

[size=10]

Code

S13E 11700 V 9750 t v W25 [E0 10 38 F0] W25 [E1 10 38 F0] W25 A W25 t
S13E 99999 V 10600 t v W25 [E0 10 38 F1] W25 [E1 10 38 F1] W25 A W25 T
S13E 11700 H 9750 t V W25 [E0 10 38 F2] W25 [E1 10 38 F2] W25 A W25 t
S13E 99999 H 10600 t V W25 [E0 10 38 F3] W25 [E1 10 38 F3] W25 A W25 T


S19.2E 11700 V 9750 TV W15 [E0 10 38 FC] W15 [E1 10 38 FC] W15 t
S19.2E 99999 V 10600 tv W15 [E0 10 38 FD] W15 [E1 10 38 FD] W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 38 FE] W15 [E1 10 38 FE] W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 38 FF] W15 [E1 10 38 FF] W15 T

You are awesome, thanks so much for your help

That was a quick theard

Now i need to find out why VDR use 120% CPU on rpi 2 and i will be all done

Thanks again

MegaV0lt · 29. November 2015

Pleas also replace all F4 - F7 to your FC -FF (in the "[]" for 19.2)

Should work:

Code

S13E 11700 V 9750 t v W25 [E0 10 38 F0] W25 [E1 10 38 F0] W25 A W25 t
S13E 99999 V 10600 t v W25 [E0 10 38 F1] W25 [E1 10 38 F1] W25 A W25 T
S13E 11700 H 9750 t V W25 [E0 10 38 F2] W25 [E1 10 38 F2] W25 A W25 t
S13E 99999 H 10600 t V W25 [E0 10 38 F3] W25 [E1 10 38 F3] W25 A W25 T


S19.2E 11700 V 9750 t v W25 [E0 10 38 FC] W25 [E1 10 38 FC] W25 B W25 t
S19.2E 99999 V 10600 t v W25 [E0 10 38 FD] W25 [E1 10 38 FD] W25 B W25 T
S19.2E 11700 H 9750 t V W25 [E0 10 38 FE] W25 [E1 10 38 FE] W25 B W25 t
S19.2E 99999 H 10600 t V W25 [E0 10 38 FF] W25 [E1 10 38 FF] W25 B W25 T

raccoon · 29. November 2015

Like this you mean right ?

Code

S13E 11700 V 9750 t v W25 [E0 10 38 F0] W25 [E1 10 38 F0] W25 A W25 t
S13E 99999 V 10600 t v W25 [E0 10 38 F1] W25 [E1 10 38 F1] W25 A W25 T
S13E 11700 H 9750 t V W25 [E0 10 38 F2] W25 [E1 10 38 F2] W25 A W25 t
S13E 99999 H 10600 t V W25 [E0 10 38 F3] W25 [E1 10 38 F3] W25 A W25 T


S19.2E 11700 V 9750 TV W15 [E0 10 38 FC] W15 [E1 10 38 FC] W15 t
S19.2E 99999 V 10600 tv W15 [E0 10 38 FD] W15 [E1 10 38 FD] W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 38 FE] W15 [E1 10 38 FE] W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 38 FF] W15 [E1 10 38 FF] W15 T

Oups sorry we were editing our post at the same time

Yes indeed like this, everything is working like a charm now.

Lo of danke for your precious help Megavolt

MegaV0lt · 29. November 2015

Right, if it s working all is fine. Is a kind of try and error
What about the "B" is it still working if you add that to the second block like in my example?

raccoon · 29. November 2015

I added B like you described me, but i got segmentation fault after few second on one channel

Nov 29 17:35:38 raspberrypi vdr: [5553] rpihddevice: [libav] bandwidth code = 61 > 60
Nov 29 17:35:38 raspberrypi vdr: [5553] rpihddevice: [libav] error decoding the audio block
Nov 29 17:35:40 raspberrypi vdr: [5571] i/o throttle activated, count = 1 (tid=5571)
Nov 29 17:35:46 raspberrypi vdr: [5571] buffer usage: 70% (tid=5570)
Nov 29 17:35:46 raspberrypi vdr: [5571] buffer usage: 60% (tid=5570)
Nov 29 17:35:46 raspberrypi vdr: [5571] buffer usage: 70% (tid=5570)
Nov 29 17:35:46 raspberrypi vdr: [5571] buffer usage: 60% (tid=5570)
Nov 29 17:35:46 raspberrypi vdr: [5571] buffer usage: 70% (tid=5570)
Nov 29 17:35:46 raspberrypi vdr: [5571] buffer usage: 60% (tid=5570)
Nov 29 17:35:46 raspberrypi vdr: [5571] buffer usage: 70% (tid=5570)
Nov 29 17:35:46 raspberrypi vdr: [5571] buffer usage: 60% (tid=5570)
Nov 29 17:35:46 raspberrypi vdr: [5571] buffer usage: 70% (tid=5570)
Nov 29 17:35:48 raspberrypi vdr: [5571] buffer usage: 80% (tid=5570)
Nov 29 17:35:48 raspberrypi vdr: [5553] rpihddevice: [libav] frame sync error
Nov 29 17:35:48 raspberrypi vdr: [5553] rpihddevice: failed to decode audio frame!
Nov 29 17:35:49 raspberrypi vdr: [5553] rpihddevice: new audio codec: 1ch MPEG
Nov 29 17:35:49 raspberrypi vdr: [5553] rpihddevice: [libav] Header missing
Nov 29 17:35:49 raspberrypi vdr: [5553] rpihddevice: failed to decode audio frame!
Nov 29 17:35:50 raspberrypi vdr: [5553] rpihddevice: new audio codec: 6ch AC3
Nov 29 17:35:50 raspberrypi vdr: [5553] rpihddevice: set HDMI audio output format to 2ch PCM, 48.0kHz
Nov 29 17:35:52 raspberrypi vdr: [5571] buffer usage: 90% (tid=5570)
Nov 29 17:35:53 raspberrypi vdr: [5571] buffer usage: 100% (tid=5570)
Nov 29 17:35:55 raspberrypi vdr: [5571] ERROR: driver buffer overflow on device 1
Nov 29 17:35:56 raspberrypi vdr: [5570] ERROR: skipped 181 bytes to sync on start of TS packet
Nov 29 17:35:58 raspberrypi vdr: [5570] ERROR: skipped 123 bytes to sync on TS packet on device 1
Nov 29 17:35:58 raspberrypi vdr: [5553] rpihddevice: [libav] bandwidth code = 62 > 60
Nov 29 17:35:58 raspberrypi vdr: [5553] rpihddevice: [libav] error decoding the audio block
Nov 29 17:35:59 raspberrypi vdr: [5553] rpihddevice: [libav] frame sync error
Nov 29 17:35:59 raspberrypi vdr: [5553] rpihddevice: failed to decode audio frame!
Nov 29 17:36:00 raspberrypi vdr: [5571] ERROR: driver buffer overflow on device 1
Nov 29 17:36:03 raspberrypi vdr: [5570] ERROR: skipped 123 bytes to sync on TS packet on device 1
Nov 29 17:36:06 raspberrypi vdr: [5570] ERROR: skipped 53 bytes to sync on start of TS packet
Nov 29 17:36:06 raspberrypi vdr: [5570] ERROR: skipped 64 bytes to sync on start of TS packet
Nov 29 17:36:06 raspberrypi vdr: [5570] ERROR: skipped 64 bytes to sync on start of TS packet
Nov 29 17:36:06 raspberrypi vdr: [5570] ERROR: skipped 64 bytes to sync on start of TS packetet
Nov 29 17:36:09 raspberrypi vdr: [5570] ERROR: skipped 188 bytes to sync on start of TS packet
Nov 29 17:36:09 raspberrypi vdr: [5570] ERROR: skipped 129 bytes to sync on start of TS packet
Nov 29 17:36:09 raspberrypi vdr: [5553] rpihddevice: new audio codec: 2ch MPEG
Nov 29 17:36:09 raspberrypi vdr: [5553] rpihddevice: [libav] Header missing
Nov 29 17:36:09 raspberrypi vdr: [5553] rpihddevice: failed to decode audio frame!
Nov 29 17:36:09 raspberrypi vdr: [5570] ERROR: skipped 188 bytes to sync on start of TS packet
Nov 29 17:36:10 raspberrypi vdr: [5570] ERROR: skipped 188 bytes to sync on start of TS packet
Nov 29 17:36:10 raspberrypi vdr: [5570] ERROR: skipped 188 bytes to sync on start of TS packet
Nov 29 17:36:11 raspberrypi vdr: [5570] ERROR: skipped 66 bytes to sync on start of TS packet
Nov 29 17:36:11 raspberrypi vdr: [5570] ERROR: skipped 188 bytes to sync on start of TS packet
Nov 29 17:36:12 raspberrypi vdr: [5570] ERROR: skipped 188 bytes to sync on start of TS packet
Nov 29 17:36:12 raspberrypi vdr: [5570] ERROR: skipped 188 bytes to sync on start of TS packet
Nov 29 17:36:12 raspberrypi vdr: [5571] ERROR: driver buffer overflow on device 1
Nov 29 17:36:12 raspberrypi vdr: [5570] ERROR: skipped 188 bytes to sync on start of TS packet
Nov 29 17:36:12 raspberrypi vdr: [5570] ERROR: skipped 78 bytes to sync on start of TS packet
Nov 29 17:36:14 raspberrypi vdr: [5571] ERROR: driver buffer overflow on device 1
Nov 29 17:36:14 raspberrypi vdr: [5570] ERROR: TS packet not accepted in Transfer Mode
Nov 29 17:36:14 raspberrypi vdr: [5610] VDR version 2.2.0 started

MegaV0lt · 29. November 2015

Just go back to the last working conf.

BTW: i do not think the segfault is because of the diseq conf.

raccoon · 29. November 2015

Actually even with the "so called working" version:

S13E 11700 V 9750 t v W25 [E0 10 38 F0] W25 [E1 10 38 F0] W25 A W25 t
S13E 99999 V 10600 t v W25 [E0 10 38 F1] W25 [E1 10 38 F1] W25 A W25 T
S13E 11700 H 9750 t V W25 [E0 10 38 F2] W25 [E1 10 38 F2] W25 A W25 t
S13E 99999 H 10600 t V W25 [E0 10 38 F3] W25 [E1 10 38 F3] W25 A W25 T

S19.2E 11700 V 9750 TV W15 [E0 10 38 FC] W15 [E1 10 38 FC] W15 t
S19.2E 99999 V 10600 tv W15 [E0 10 38 FD] W15 [E1 10 38 FD] W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 38 FE] W15 [E1 10 38 FE] W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 38 FF] W15 [E1 10 38 FF] W15 T

on 13E i have plenty of :

Nov 29 17:42:30 raspberrypi vdr: [5732] buffer usage: 60% (tid=5731)
Nov 29 17:42:30 raspberrypi vdr: [5732] buffer usage: 70% (tid=5731)
Nov 29 17:42:30 raspberrypi vdr: [5732] buffer usage: 60% (tid=5731)
Nov 29 17:42:30 raspberrypi vdr: [5732] buffer usage: 70% (tid=5731)
Nov 29 17:42:30 raspberrypi vdr: [5732] buffer usage: 60% (tid=5731)
Nov 29 17:42:30 raspberrypi vdr: [5732] buffer usage: 70% (tid=5731)
Nov 29 17:42:30 raspberrypi vdr: [5732] buffer usage: 60% (tid=5731)
Nov 29 17:42:30 raspberrypi vdr: [5732] buffer usage: 70% (tid=5731)
Nov 29 17:42:30 raspberrypi vdr: [5732] buffer usage: 60% (tid=5731)
Nov 29 17:42:38 raspberrypi vdr: [5703] rpihddevice: [libav] frame sync error
Nov 29 17:42:38 raspberrypi vdr: [5703] rpihddevice: failed to decode audio frame!

And the stream freeze after some time but no segmentation fault, thing that doesn't occur if i don't use diseqc.

You have W25 and i have W15, what is the difference ?

MegaV0lt · 29. November 2015

Take a look in the diseq.conf:

Code

# DiSEqC configuration for VDR
#
# Format:
#
# satellite slof polarization lof command...
#
# satellite:  	one of the 'S' codes defined in sources.conf
#             	the special value 'S360E' means that this entry uses a positioner
#             	(command 'P') that can move the dish to any requested satellite
#             	position within its range
# slof:       	switch frequency of LNB; the first entry with
#             	an slof greater than the actual transponder
#             	frequency will be used
# polarization:   V = vertical, H = horizontal, L = Left circular, R = Right circular
# lof:        	the local oscillator frequency to subtract from
#             	the actual transponder frequency
# command:
#   t     	tone off
#   T     	tone on
#   v     	voltage low (13V)
#   V     	voltage high (18V)
#   A     	mini A
#   B     	mini B
#   Pn    	use positioner to move dish to satellite position n (or to the
#         	satellite's orbital position, if no position number is given)
#   Sn    	satellite channel routing code sequence for bank n follows
#   Wnn   	wait nn milliseconds (nn may be any positive integer number)
#   [xx ...]  hex code sequence (max. 6)
#
# The 'command...' part is optional.
#
# A line containing space separated integer numbers, terminated with a ':',
# defines that any following DiSEqC sequences apply only to the given list
# of device numbers.

Alles anzeigen

Wxx is the milliseconds to wait

Is the 19.2 working? Then adapt the 13E part to it. Maybe just remove The "A W25" parts?

raccoon · 29. November 2015

Thanks MegaVolt,

I tried many combination, the wining one so far is :

Code

S13E 11700 V 9750 t v W25 [E0 10 38 F0] W25 [E1 10 38 F0] W25 A W25 tS13E 99999 V 10600 t v W25 [E0 10 38 F1] W25 [E1 10 38 F1] W25 A W25 TS13E 11700 H 9750 t V W25 [E0 10 38 F2] W25 [E1 10 38 F2] W25 A W25 tS13E 99999 H 10600 t V W25 [E0 10 38 F3] W25 [E1 10 38 F3] W25 A W25 TS19.2E 11700 V 9750 TV W15 [E0 10 38 FC] W15 [E1 10 38 FC] W15 tS19.2E 99999 V 10600 tv W15 [E0 10 38 FD] W15 [E1 10 38 FD] W15 TS19.2E 11700 H 9750 t V W15 [E0 10 38 FE] W15 [E1 10 38 FE] W15 tS19.2E 99999 H 10600 t V W15 [E0 10 38 FF] W15 [E1 10 38 FF] W15 T

I will keep on playing on different settings meanwhile, but its true that i dont receive
too well the signal on 13º, while withtout diseqc, its fine, its ok i will be playing a while,
now that i understood the F0-F3 / FC-FF thing

Thanks a lot for your precious help, very much appreciated

MegaV0lt · 29. November 2015

You should check the first two 19,2 lines. For me they are wrong at the beginning. "TV" should be"t v" and "tv" should be "t v". Besides all configs i have seen begin with "tone off" (t).

Is also possible, that the second diseq block is not needed. In that case you can remove the "Wxx [E1...]" Blocks, but keep the first ones. There is also examples in the diseq conf file:

Code

# Examples:


# Full DiSEqC sequence:
#
#S19.2E  11700 V  9750  t v W15 [E0 10 38 F0] W15 A W15 t
#S19.2E  99999 V 10600  t v W15 [E0 10 38 F1] W15 A W15 T
#S19.2E  11700 H  9750  t V W15 [E0 10 38 F2] W15 A W15 t
#S19.2E  99999 H 10600  t V W15 [E0 10 38 F3] W15 A W15 T
#
#S13.0E  11700 V  9750  t v W15 [E0 10 38 F4] W15 B W15 t
#S13.0E  99999 V 10600  t v W15 [E0 10 38 F5] W15 B W15 T
#S13.0E  11700 H  9750  t V W15 [E0 10 38 F6] W15 B W15 t
#S13.0E  99999 H 10600  t V W15 [E0 10 38 F7] W15 B W15 T
#
# Optimized for mini DiSEqC (aka toneburst):
#
# S19.2E  11700 V  9750  t v W15 A W15 t
# S19.2E  99999 V 10600  t v W15 A W15 T
# S19.2E  11700 H  9750  t V W15 A W15 t
# S19.2E  99999 H 10600  t V W15 A W15 T
#
# S13.0E  11700 V  9750  t v W15 B W15 t
# S13.0E  99999 V 10600  t v W15 B W15 T
# S13.0E  11700 H  9750  t V W15 B W15 t
# S13.0E  99999 H 10600  t V W15 B W15 T
#
# Optimized for full DiSEqC:
#
# S19.2E  11700 V  9750  [E0 10 38 F0]
# S19.2E  99999 V 10600  [E0 10 38 F1]
# S19.2E  11700 H  9750  [E0 10 38 F2]
# S19.2E  99999 H 10600  [E0 10 38 F3]
#
# S13.0E  11700 V  9750  [E0 10 38 F4]
# S13.0E  99999 V 10600  [E0 10 38 F5]
# S13.0E  11700 H  9750  [E0 10 38 F6]
# S13.0E  99999 H 10600  [E0 10 38 F7]

Alles anzeigen

raccoon · 29. November 2015

All fixed now, the bad quality was due to a little glitch in the cable connexion to the diseqc,
now with you disecq.conf you provided me, everyhing is perfectly stable.

Thanks again for your support

[SOLVED] Disecq 2.0 , 4 in 1 out

Jetzt mitmachen!

Teilen

Tags

Benutzer online in diesem Thema