VDR lauft aber kein bild !

Hallo,

Ich habe laut vdr -V folgendes installiert:

vdr (1.7.16/1.7.16) - The Video Disk Recorderr
streamdev-server (0.5.0) - VDR Streaming Server
streamdev-client (0.5.0) - VTP Streaming Client
vnsiserver (0.0.1) - VDR-Network-Streaming-Interface (VNSI) Server

und starte mit

/usr/local/bin/vdr -d -P vnsiserver -P streamdev-server

auf meiner back-end server mit Tevii S480 karten mit s2-liplianin treiber.

Aber ich bekomme kein bild auf meiner front-end!
Nicht mit de XBMC und auch nicht mit firefox an http://backend:3000
Er hat 844 kanalen, der EPG wird auch geladen, kan ich auch in XBMC sehen aber bild gibt es keiner.

Der vdradmin-am lauft auch an port 8001 aber auch dort kein bild beim "Watch TV" menu

Was muss ich jetzt noch andern ?

Gruss,

Paul

Ok aus syslog nach erstermal starten von vdr

Jan 14 09:00:23 backend vdr: [2703] VDR version 1.7.16 started
Jan 14 09:00:23 backend vdr: [2703] running as daemon (tid=2703)
Jan 14 09:00:23 backend vdr: [2703] codeset is 'UTF-8' - known
Jan 14 09:00:23 backend vdr: [2703] found 27 locales in /usr/share/locale
Jan 14 09:00:23 backend vdr: [2703] loading plugin: /usr/local/lib/libvdr-vnsiserver.so.1.7.16
Jan 14 09:00:23 backend vdr: [2703] loading plugin: /usr/local/lib/libvdr-streamdev-server.so.1.7.16
Jan 14 09:00:23 backend vdr: [2703] loading /etc/vdr/setup.conf
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: CutTimePatchEnabled = 0
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: JumpPlay = 0
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: MenuCmdPosition = 0
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: PauseLastMark = 0
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: PlayJump = 0
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: RecordDolbyDigital = 1
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: ReloadMarks = 0
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: ShowProgressBar = 0
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: ShowRecDate = 1
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: ShowRecLength = 0
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown config parameter: ShowRecTime = 1
Jan 14 09:00:23 backend vdr: [2703] ERROR: unknown source key '0'
Jan 14 09:00:23 backend vdr: [2703] loading /etc/vdr/sources.conf
Jan 14 09:00:23 backend vdr: [2703] loading /etc/vdr/diseqc.conf
Jan 14 09:00:23 backend vdr: [2703] loading /etc/vdr/channels.conf
Jan 14 09:00:23 backend vdr: [2703] loading /etc/vdr/timers.conf
Jan 14 09:00:23 backend vdr: [2703] loading /etc/vdr/svdrphosts.conf
Jan 14 09:00:23 backend vdr: [2703] loading /etc/vdr/keymacros.conf
Jan 14 09:00:23 backend vdr: [2704] video directory scanner thread started (pid=2703, tid=2704)
Jan 14 09:00:23 backend vdr: [2703] reading EPG data from /etc/vdr/video/epg.data
Jan 14 09:00:23 backend vdr: [2705] video directory scanner thread started (pid=2703, tid=2705)
Jan 14 09:00:23 backend vdr: [2705] video directory scanner thread ended (pid=2703, tid=2705)
Jan 14 09:00:23 backend vdr: [2704] video directory scanner thread ended (pid=2703, tid=2704)
Jan 14 09:00:23 backend vdr: [2703] registered source parameters for 'A - ATSC'
Jan 14 09:00:23 backend vdr: [2703] registered source parameters for 'C - DVB-C'
Jan 14 09:00:23 backend vdr: [2703] registered source parameters for 'S - DVB-S'
Jan 14 09:00:23 backend vdr: [2703] registered source parameters for 'T - DVB-T'
Jan 14 09:00:23 backend vdr: [2703] probing /dev/dvb/adapter0/frontend0
Jan 14 09:00:23 backend vdr: [2703] creating cDvbDevice
Jan 14 09:00:23 backend vdr: [2703] new device number 1
Jan 14 09:00:23 backend vdr: [2703] frontend 0/0 provides DVB-S2 with QPSK ("Montage Technology DS3000/TS2020")
Jan 14 09:00:23 backend vdr: [2707] tuner on frontend 0/0 thread started (pid=2703, tid=2707)
Jan 14 09:00:23 backend vdr: [2703] probing /dev/dvb/adapter1/frontend0
Jan 14 09:00:23 backend vdr: [2703] creating cDvbDevice
Jan 14 09:00:23 backend vdr: [2703] new device number 2
Jan 14 09:00:23 backend vdr: [2708] section handler thread started (pid=2703, tid=2708)
Jan 14 09:00:23 backend vdr: [2703] frontend 1/0 provides DVB-S2 with QPSK ("Montage Technology DS3000/TS2020")
Jan 14 09:00:23 backend vdr: [2710] tuner on frontend 1/0 thread started (pid=2703, tid=2710)
Jan 14 09:00:23 backend vdr: [2703] found 2 DVB devices
Jan 14 09:00:23 backend vdr: [2703] initializing plugin: vnsiserver (0.0.1): VDR-Network-Streaming-Interface (VNSI) Server
Jan 14 09:00:23 backend vdr: [2703] initializing plugin: streamdev-server (0.5.0): VDR Streaming Server
Jan 14 09:00:23 backend vdr: [2703] setting primary device to 1
Jan 14 09:00:23 backend vdr: [2711] section handler thread started (pid=2703, tid=2711)
Jan 14 09:00:23 backend vdr: [2703] device 1 has no MPEG decoder
Jan 14 09:00:23 backend vdr: [2703] assuming manual start of VDR
Jan 14 09:00:23 backend vdr: [2703] SVDRP listening on port 6419
Jan 14 09:00:23 backend vdr: [2703] setting current skin to "sttng"
Jan 14 09:00:23 backend vdr: [2703] loading /etc/vdr/themes/sttng-default.theme
Jan 14 09:00:23 backend vdr: [2703] starting plugin: vnsiserver
Jan 14 09:00:23 backend vdr: [2703] VNSI: VNSI Server started
Jan 14 09:00:23 backend vdr: [2703] starting plugin: streamdev-server
Jan 14 09:00:23 backend vdr: [2703] loading /etc/vdr/plugins/streamdev-server/streamdevhosts.conf
Jan 14 09:00:23 backend vdr: [2703] switching to channel 1
Jan 14 09:00:23 backend vdr: [2712] VDR VNSI Server thread started (pid=2703, tid=2712)
Jan 14 09:00:23 backend vdr: [2713] streamdev server thread started (pid=2703, tid=2713)
Jan 14 09:00:23 backend vdr: [2713] Streamdev: Listening (VTP) on port 2004
Jan 14 09:00:23 backend vdr: [2713] Streamdev: Listening (HTTP) on port 3000
Jan 14 09:00:23 backend vdr: [2703] OSD size changed to 720x480 @ 1
Jan 14 09:00:23 backend vdr: [2703] ERROR: no OSD provider available - using dummy OSD!
Jan 14 09:00:30 backend vdr: [2708] creating new channel 'TELEMAISON,;CSAT' on S19.2E transponder 212551 with id 1-1100-8701-0
Jan 14 09:00:30 backend vdr: [2708] creating new channel 'JIMMY,;CSAT' on S19.2E transponder 212551 with id 1-1100-8702-0
J
...
...
dann geht is mehr creating new channels
wenn connecting mit xbmc client mit VDR Streamdev Client sagt er im syslog folgendes:

Jan 14 09:00:35 backend vdr: [2708] changing pids of channel 39 from 0+0=0:0:0:0 to 162+162=2:88=fra@4,89=eng@4:0:38
Jan 14 09:00:35 backend vdr: [2708] changing caids of channel 39 from 0 to 500,1811,100
Jan 14 09:00:56 backend vdr: [2713] Streamdev: Setting data connection to 192.168.1.213:33594
Jan 14 09:00:56 backend vdr: [2715] streamdev-writer thread started (pid=2703, tid=2715)
Jan 14 09:00:56 backend vdr: [2717] receiver on device 2 thread started (pid=2703, tid=2717)
Jan 14 09:00:56 backend vdr: [2716] streamdev-livestreaming thread started (pid=2703, tid=2716)
Jan 14 09:00:56 backend vdr: [2718] TS buffer on device 2 thread started (pid=2703, tid=2718)
Jan 14 09:01:10 backend vdr: [2710] frontend 1/0 timed out while tuning to channel 4, tp 212551
Jan 14 09:01:14 backend vdr: [2716] streamdev-livestreaming thread ended (pid=2703, tid=2716)
Jan 14 09:01:14 backend vdr: [2715] streamdev-writer thread ended (pid=2703, tid=2715)
Jan 14 09:01:14 backend vdr: [2713] buffer stats: 0 (0%) used
Jan 14 09:01:14 backend vdr: [2718] TS buffer on device 2 thread ended (pid=2703, tid=2718)
Jan 14 09:01:14 backend vdr: [2717] buffer stats: 0 (0%) used
Jan 14 09:01:14 backend vdr: [2717] receiver on device 2 thread ended (pid=2703, tid=2717)

Das zelber sagt er auch mit VNSI client auf XBMC:

Jan 14 09:04:30 backend vdr: [2712] loading /etc/vdr/plugins/vnsiserver/allowed_hosts.conf
Jan 14 09:04:30 backend vdr: [2712] VNSI: Client with ID 0 connected: 192.168.1.213:41943
Jan 14 09:04:30 backend vdr: [2719] VNSI: Welcome client '(null)' with protocol version '1'
Jan 14 09:04:41 backend vdr: [2712] loading /etc/vdr/plugins/vnsiserver/allowed_hosts.conf
Jan 14 09:04:41 backend vdr: [2712] VNSI: Client with ID 1 connected: 192.168.1.213:41944
Jan 14 09:04:41 backend vdr: [2721] VNSI: Welcome client 'XBMC Live stream receiver' with protocol version '1'
Jan 14 09:04:41 backend vdr: [2722] VNSI: Successfully found following device: 0xb5a07898 (2) for receiving
Jan 14 09:04:41 backend vdr: [2722] VNSI: Creating new live Receiver
Jan 14 09:04:41 backend vdr: [2723] cLiveStreamer stream processor thread started (pid=2703, tid=2723)
Jan 14 09:04:41 backend vdr: [2722] VNSI: Successfully switched to channel 6 - Bibel TV
Jan 14 09:04:41 backend vdr: [2722] VNSI: Started streaming of channel 6 - Bibel TV
Jan 14 09:04:41 backend vdr: [2724] receiver on device 2 thread started (pid=2703, tid=2724)
Jan 14 09:04:41 backend vdr: [2725] TS buffer on device 2 thread started (pid=2703, tid=2725)
Jan 14 09:04:44 backend vdr: [2722] VNSI-Error: cxSocket::read: read() error at 0/4
Jan 14 09:04:44 backend vdr: [2723] cLiveStreamer stream processor thread ended (pid=2703, tid=2723)
Jan 14 09:04:44 backend vdr: [2722] buffer stats: 0 (0%) used
Jan 14 09:04:45 backend vdr: [2725] TS buffer on device 2 thread ended (pid=2703, tid=2725)
Jan 14 09:04:45 backend vdr: [2724] buffer stats: 0 (0%) used
Jan 14 09:04:45 backend vdr: [2724] receiver on device 2 thread ended (pid=2703, tid=2724)
Jan 14 09:04:46 backend vdr: [2712] VNSI: Client with ID 1 seems to be disconnected, removing from client list
Jan 14 09:04:46 backend vdr: [2712] VNSI: cConnection::~cConnection()
Jan 14 09:04:46 backend vdr: [2712] VNSI: stopping cConnection thread ...
Jan 14 09:04:46 backend vdr: [2712] VNSI: done

Hat das alles etwas mit der TeviiS480 karte zu tun oder etwas anders ?

Gruss,

Was mir aus den syslog auffalt ist folgende:

Jan 14 09:18:01 backend vdr: [2712] VNSI: Client with ID 8 connected: 192.168.1.213:60391
Jan 14 09:18:01 backend vdr: [2768] VNSI: Welcome client 'XBMC Live stream receiver' with protocol version '1'
Jan 14 09:18:01 backend vdr: [2769] VNSI: Successfully found following device: 0xb5a07898 (2) for receiving
Jan 14 09:18:01 backend vdr: [2769] VNSI: Creating new live Receiver
Jan 14 09:18:01 backend vdr: [2770] cLiveStreamer stream processor thread started (pid=2703, tid=2770)
Jan 14 09:18:01 backend vdr: [2769] VNSI: Successfully switched to channel 13 - CNBC Europe
Jan 14 09:18:01 backend vdr: [2769] VNSI: Started streaming of channel 13 - CNBC Europe
Jan 14 09:18:01 backend vdr: [2771] receiver on device 2 thread started (pid=2703, tid=2771)
Jan 14 09:18:01 backend vdr: [2772] TS buffer on device 2 thread started (pid=2703, tid=2772)
Jan 14 09:18:04 backend vdr: [2769] VNSI-Error: cxSocket::read: read() error at 0/4
Jan 14 09:18:04 backend vdr: [2770] cLiveStreamer stream processor thread ended (pid=2703, tid=2770)
Jan 14 09:18:04 backend vdr: [2769] buffer stats: 0 (0%) used
Jan 14 09:18:04 backend vdr: [2772] TS buffer on device 2 thread ended (pid=2703, tid=2772)
Jan 14 09:18:04 backend vdr: [2771] buffer stats: 0 (0%) used
Jan 14 09:18:04 backend vdr: [2771] receiver on device 2 thread ended (pid=2703, tid=2771)
Jan 14 09:18:06 backend vdr: [2712] VNSI: Client with ID 8 seems to be disconnected, removing from client list
Jan 14 09:18:06 backend vdr: [2712] VNSI: cConnection::~cConnection()
Jan 14 09:18:06 backend vdr: [2712] VNSI: stopping cConnection thread ...
Jan 14 09:18:06 backend vdr: [2712] VNSI: done
J

Er versucht an device 2 anzugriffen aber meiner lnb ist an device 1 angeschlossen ?? Muss ich das angriff (und wie/wo) aendern ?

Das der S480 noch nicht richting funktioniert hab ich gesehen aber auch mit S oder nur mit S2 /HD kanalen ?

Ok, so besseres wird ein andere karte (Tevii S470??) bekommen und warten auf Tevii fur die S480 drivers ?