kaffeine geht, vdr verweigert [gelöst]

hallo, ich versteh das nicht, mein DVB-T usb stick füttert Kaffein, aber speist nicht vdr?
mit vdr hatte ich schon mal empfang, jetzt wieder nicht? ich durchschau das nicht
lg

meinaccount@meinrechner:~$:~$ vdr-sxfe --verbose
vdr-sxfe 1.0.1 (build with xine-lib 1.1.14, using xine-lib 1.1.14)

Verbose mode

VDR server not given, searching ...
[10537] [discovery] Reveived broadcast: 66 bytes from 10.0.1.3
VDR xineliboutput DISCOVERY 1.0
Client: 255.255.255.255:37890
[gekürzt weil nicht notwenig]

hallo

danke für die reaktion

also der stick wird an scheinend nur erkannt wenn er nach dem booten, erst eingestöpselt wird, sonst geht nix:(

einschalten, anmelden, anstöpseln:
kaffeine geht, vdr findet nix

(mit vdr konnte ich schon mal was empfangen, weiß aber leider ned wovon das abhing, da war der stick seltsamerweise eingestöpselt)

ich blick gar ned durch

TIA und lg

p.

PS
sylog auszug konnte nicht anghängt werden (zu groß:()

shutting down for system reboot
Jul 16 08:57:32 localhost init: Switching to runlevel: 6
Jul 16 08:57:33 localhost hddtemp[3119]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:57:35 localhost hddtemp[3119]: /dev/sda: WDC WD1600BEVS-60RST0: 57 C
Jul 16 08:57:37 localhost hddtemp[3119]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:57:39 localhost hddtemp[3119]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:57:40 localhost 8-_-_var_-_log_-_mail.log: 8-_-_var_-_log_-_mail.log: client (pid 3013) killed by signal 15, stopping
Jul 16 08:57:40 localhost 9-_-_var_-_log_-_syslog: 9-_-_var_-_log_-_syslog: client (pid 3014) killed by signal 15, stopping
Jul 16 08:57:41 localhost vdr: [3257] caught signal 15
Jul 16 08:57:41 localhost vdr: [3257] stopping plugin: timeline
Jul 16 08:57:41 localhost vdr: [3257] stopping plugin: prefermenu
Jul 16 08:57:41 localhost vdr: [3257] stopping plugin: autotimeredit
Jul 16 08:57:41 localhost vdr: [3257] stopping plugin: live
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: text2skin
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: quickepgsearch
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: epgsearch
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: epgsearchonly
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: nordlichtsepg
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: tvonscreen
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: osdteletext
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: wirbelscan
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: reelchannelscan
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: xineliboutput
Jul 16 08:57:42 localhost vdr: [3257] [xine..put] cXinelibDevice::StopDevice(): Stopping device ...
Jul 16 08:57:42 localhost vdr: [3302] transfer thread ended (pid=3257, tid=3302)
Jul 16 08:57:42 localhost vdr: [3257] buffer stats: 0 (0%) used
Jul 16 08:57:42 localhost kernel: dvb-usb: error while stopping stream.
Jul 16 08:57:42 localhost vdr: [3304] TS buffer on device 1 thread ended (pid=3257, tid=3304)
Jul 16 08:57:42 localhost vdr: [3303] buffer stats: 0 (0%) used
Jul 16 08:57:42 localhost vdr: [3303] receiver on device 1 thread ended (pid=3257, tid=3303)
Jul 16 08:57:42 localhost vdr: [3292] Remote decoder/display server (cXinelibServer) thread ended (pid=3257, tid=3292)
Jul 16 08:57:42 localhost vdr: [3257] stopping plugin: conflictcheckonly
Jul 16 08:57:42 localhost vdr: [3257] [xine..put] cXinelibOsdProvider: shutting down !
Jul 16 08:57:42 localhost vdr: [3257] saved setup to /var/lib/vdr/setup.conf
Jul 16 08:57:43 localhost vdr: [3290] section handler thread ended (pid=3257, tid=3290)
Jul 16 08:57:43 localhost vdr: [3289] tuner on device 1 thread ended (pid=3257, tid=3289)
Jul 16 08:57:43 localhost vdr: [3257] [xine..put] cXinelibDevice::StopDevice(): Stopping device ...
Jul 16 08:57:43 localhost vdr: [3257] deleting plugin: timeline
Jul 16 08:57:43 localhost vdr: [3257] deleting plugin: prefermenu
Jul 16 08:57:43 localhost vdr: [3257] deleting plugin: autotimeredit
Jul 16 08:57:43 localhost vdr: [3257] deleting plugin: live
Jul 16 08:57:43 localhost vdr: [3257] deleting plugin: text2skin
Jul 16 08:57:43 localhost vdr: [3257] deleting plugin: quickepgsearch
Jul 16 08:57:43 localhost vdr: [3257] deleting plugin: epgsearch
Jul 16 08:57:44 localhost vdr: [3293] EPGSearch: Leaving conflict check thread
Jul 16 08:57:44 localhost vdr: [3293] EPGSearch: conflictcheck thread ended (pid=3257, tid=3293)
Jul 16 08:57:44 localhost vdr: [3257] deleting plugin: epgsearchonly
Jul 16 08:57:44 localhost vdr: [3257] deleting plugin: nordlichtsepg
Jul 16 08:57:44 localhost vdr: [3257] deleting plugin: tvonscreen
Jul 16 08:57:44 localhost vdr: [3257] deleting plugin: osdteletext
Jul 16 08:57:44 localhost vdr: [3257] deleting plugin: wirbelscan
Jul 16 08:57:44 localhost vdr: [3257] deleting plugin: reelchannelscan
Jul 16 08:57:44 localhost vdr: [3257] deleting plugin: xineliboutput
Jul 16 08:57:44 localhost vdr: [3257] deleting plugin: conflictcheckonly
Jul 16 08:57:44 localhost vdr: [3257] max. latency time 1 seconds
Jul 16 08:57:44 localhost vdr: [3257] exiting, exit code 0
Jul 16 08:57:44 localhost kernel: dvb-usb: Hauppauge Nova-T Stick successfully deinitialized and disconnected.
Jul 16 08:57:46 localhost squid[3343]: Squid Parent: child process 3346 exited with status 0
Jul 16 08:57:48 localhost kernel: fuse exit
Jul 16 08:57:49 localhost acpid: exiting
Jul 16 08:57:49 localhost kernel: Kernel logging (proc) stopped.
Jul 16 08:58:53 localhost kernel: imklog 3.16.2, log source = /proc/kmsg started.
Jul 16 08:58:53 localhost kernel: Inspecting /boot/System.map-2.6.25-4.slh.2-sidux-686
Jul 16 08:58:53 localhost kernel: Loaded 27639 symbols from /boot/System.map-2.6.25-4.slh.2-sidux-686.
Jul 16 08:58:53 localhost kernel: Symbols match kernel version 2.6.25.
Jul 16 08:58:53 localhost kernel: Loaded 21662 symbols from 105 modules.
Jul 16 08:58:53 localhost kernel: Initializing cgroup subsys cpuset
Jul 16 08:58:53 localhost kernel: Initializing cgroup subsys cpu
Jul 16 08:58:53 localhost kernel: Linux version 2.6.25-4.slh.2-sidux-686 (Debian 2.6.25-18) (s.l-h@gmx.de) (gcc version 4.2.4 20080512 (prerelease) (Debian 4.2.3-6)) #1 SMP PREEMPT Thu May 15 23:02:54 UTC 2008
Jul 16 08:58:53 localhost kernel: BIOS-provided physical RAM map:
Jul 16 08:58:53 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 0000000000100000 - 000000003f670000 (usable)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 000000003f670000 - 000000003f700000 (ACPI NVS)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jul 16 08:58:53 localhost kernel: BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Jul 16 08:58:53 localhost kernel: 118MB HIGHMEM available.
Jul 16 08:58:53 localhost kernel: 896MB LOWMEM available.
Jul 16 08:58:53 localhost kernel: Scan SMP from c0000000 for 1024 bytes.
Jul 16 08:58:53 localhost kernel: Scan SMP from c009fc00 for 1024 bytes.
Jul 16 08:58:53 localhost kernel: Scan SMP from c00f0000 for 65536 bytes.
Jul 16 08:58:53 localhost kernel: found SMP MP-table at [c00f7d10] 000f7d10
Jul 16 08:58:53 localhost kernel: Entering add_active_range(0, 0, 259696) 0 entries of 256 used
Jul 16 08:58:53 localhost kernel: Zone PFN ranges:
Jul 16 08:58:53 localhost kernel: DMA 0 -> 4096
Jul 16 08:58:53 localhost kernel: Normal 4096 -> 229376
Jul 16 08:58:53 localhost kernel: HighMem 229376 -> 259696
Jul 16 08:58:53 localhost kernel: Movable zone start PFN for each node
Jul 16 08:58:53 localhost kernel: early_node_map[1] active PFN ranges
Jul 16 08:58:53 localhost kernel: 0: 0 -> 259696
Jul 16 08:58:53 localhost kernel: On node 0 totalpages: 259696
Jul 16 08:58:53 localhost kernel: DMA zone: 32 pages used for memmap
Jul 16 08:58:53 localhost kernel: DMA zone: 0 pages reserved
Jul 16 08:58:53 localhost kernel: DMA zone: 4064 pages, LIFO batch:0
Jul 16 08:58:53 localhost kernel: Normal zone: 1760 pages used for memmap
Jul 16 08:58:53 localhost kernel: Normal zone: 223520 pages, LIFO batch:31
Jul 16 08:58:53 localhost kernel: HighMem zone: 236 pages used for memmap
Jul 16 08:58:53 localhost kernel: HighMem zone: 30084 pages, LIFO batch:7
Jul 16 08:58:53 localhost kernel: Movable zone: 0 pages used for memmap
Jul 16 08:58:53 localhost kernel: DMI present.
Jul 16 08:58:53 localhost kernel: ACPI: RSDP 000F7C60, 0024 (r2 HP )
Jul 16 08:58:53 localhost kernel: ACPI: XSDT 3F67B2E5, 0084 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
Jul 16 08:58:53 localhost kernel: ACPI: FACP 3F683BF8, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
Jul 16 08:58:53 localhost kernel: ACPI: DSDT 3F67C5E7, 759D (r1 HP 30BB 6040000 MSFT 100000E)
Jul 16 08:58:53 localhost kernel: ACPI: FACS 3F684FC0, 0040
Jul 16 08:58:53 localhost kernel: ACPI: APIC 3F683CEC, 0068 (r1 HP 30BB 6040000 LOHR 5A)
Jul 16 08:58:53 localhost kernel: ACPI: HPET 3F683D54, 0038 (r1 HP 30BB 6040000 LOHR 5A)
Jul 16 08:58:53 localhost kernel: ACPI: MCFG 3F683D8C, 003C (r1 HP 30BB 6040000 LOHR 5A)
Jul 16 08:58:53 localhost kernel: ACPI: TCPA 3F683DC8, 0032 (r1 HP 30BB 6040000 PTL 1)
Jul 16 08:58:53 localhost kernel: ACPI: APIC 3F683DFA, 0068 (r1 HP 30BB 6040000 LTP 0)
Jul 16 08:58:53 localhost kernel: ACPI: BOOT 3F683E62, 0028 (r1 HP 30BB 6040000 LTP 1)
Jul 16 08:58:53 localhost kernel: ACPI: SLIC 3F683E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
Jul 16 08:58:53 localhost kernel: ACPI: SSDT 3F67C3DD, 020A (r1 HP 30BB 1000 INTL 20050624)
Jul 16 08:58:53 localhost kernel: ACPI: SSDT 3F67B8F5, 025F (r1 HP 30BB 3000 INTL 20050624)
Jul 16 08:58:53 localhost kernel: ACPI: SSDT 3F67B84F, 00A6 (r1 HP 30BB 3000 INTL 20050624)
Jul 16 08:58:53 localhost kernel: ACPI: SSDT 3F67B369, 04E6 (r1 HP 30BB 3000 INTL 20050624)
Jul 16 08:58:53 localhost kernel: ACPI: BIOS bug: multiple APIC/MADT found, using 0
Jul 16 08:58:53 localhost kernel: ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Jul 16 08:58:53 localhost kernel: ACPI: DMI detected: Hewlett-Packard
Jul 16 08:58:53 localhost kernel: ACPI: PM-Timer IO Port: 0x1008
Jul 16 08:58:53 localhost kernel: ACPI: Local APIC address 0xfee00000
Jul 16 08:58:53 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jul 16 08:58:53 localhost kernel: Processor #0 6:14 APIC version 20
Jul 16 08:58:53 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jul 16 08:58:53 localhost kernel: Processor #1 6:14 APIC version 20
Jul 16 08:58:53 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jul 16 08:58:53 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jul 16 08:58:53 localhost kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jul 16 08:58:53 localhost kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jul 16 08:58:53 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 16 08:58:53 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jul 16 08:58:53 localhost kernel: ACPI: IRQ0 used by override.
Jul 16 08:58:53 localhost kernel: ACPI: IRQ2 used by override.
Jul 16 08:58:53 localhost kernel: ACPI: IRQ9 used by override.
Jul 16 08:58:53 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Jul 16 08:58:53 localhost kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jul 16 08:58:53 localhost kernel: Using ACPI (MADT) for SMP configuration information
Jul 16 08:58:53 localhost kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Jul 16 08:58:53 localhost kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jul 16 08:58:53 localhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
Jul 16 08:58:53 localhost kernel: PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Jul 16 08:58:53 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257668
Jul 16 08:58:53 localhost kernel: Kernel command line: root=UUID=bb9ea402-e3c3-4538-aea8-cd4d44764748 ro quiet vga=791
Jul 16 08:58:53 localhost kernel: mapped APIC to ffffb000 (fee00000)
Jul 16 08:58:53 localhost kernel: mapped IOAPIC to ffffa000 (fec00000)
Jul 16 08:58:53 localhost kernel: Enabling fast FPU save and restore... done.
Jul 16 08:58:53 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Jul 16 08:58:53 localhost kernel: Initializing CPU#0
Jul 16 08:58:53 localhost kernel: Preemptible RCU implementation.
Jul 16 08:58:53 localhost kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Jul 16 08:58:53 localhost kernel: Detected 1862.705 MHz processor.
Jul 16 08:58:53 localhost kernel: Console: colour dummy device 80x25
Jul 16 08:58:53 localhost kernel: console [tty0] enabled
Jul 16 08:58:53 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jul 16 08:58:53 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 16 08:58:53 localhost kernel: Memory: 1018460k/1038784k available (2151k kernel code, 19572k reserved, 762k data, 264k init, 121280k highmem)
Jul 16 08:58:53 localhost kernel: virtual kernel memory layout:
Jul 16 08:58:53 localhost kernel: fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
Jul 16 08:58:53 localhost kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jul 16 08:58:53 localhost kernel: vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Jul 16 08:58:53 localhost kernel: lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Jul 16 08:58:53 localhost kernel: .init : 0xc03df000 - 0xc0421000 ( 264 kB)
Jul 16 08:58:53 localhost kernel: .data : 0xc0319eb8 - 0xc03d8720 ( 762 kB)
Jul 16 08:58:53 localhost kernel: .text : 0xc0100000 - 0xc0319eb8 (2151 kB)
Jul 16 08:58:53 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jul 16 08:58:53 localhost kernel: CPA: page pool initialized 1 of 1 pages preallocated
Jul 16 08:58:53 localhost kernel: SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Jul 16 08:58:53 localhost kernel: hpet clockevent registered
Jul 16 08:58:53 localhost kernel: Calibrating delay using timer specific routine.. 3728.55 BogoMIPS (lpj=1864278)
Jul 16 08:58:53 localhost kernel: Security Framework initialized
Jul 16 08:58:53 localhost kernel: SELinux: Disabled at boot.
Jul 16 08:58:53 localhost kernel: Capability LSM initialized
Jul 16 08:58:53 localhost kernel: Mount-cache hash table entries: 512
Jul 16 08:58:53 localhost kernel: Initializing cgroup subsys ns
Jul 16 08:58:53 localhost kernel: Initializing cgroup subsys cpuacct
Jul 16 08:58:53 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jul 16 08:58:53 localhost kernel: CPU: L2 cache: 1024K
Jul 16 08:58:53 localhost kernel: CPU: Physical Processor ID: 0
Jul 16 08:58:53 localhost kernel: CPU: Processor Core ID: 0
Jul 16 08:58:53 localhost kernel: Intel machine check architecture supported.
Jul 16 08:58:53 localhost kernel: Intel machine check reporting enabled on CPU#0.
Jul 16 08:58:53 localhost kernel: using mwait in idle threads.
Jul 16 08:58:53 localhost kernel: Compat vDSO mapped to ffffe000.
Jul 16 08:58:53 localhost kernel: Checking 'hlt' instruction... OK.
Jul 16 08:58:53 localhost kernel: ACPI: Core revision 20070126
Jul 16 08:58:53 localhost kernel: ACPI: Checking initramfs for custom DSDT
Jul 16 08:58:53 localhost kernel: CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
Jul 16 08:58:53 localhost kernel: Booting processor 1/1 ip 4000
Jul 16 08:58:53 localhost kernel: Initializing CPU#1
Jul 16 08:58:53 localhost kernel: Calibrating delay using timer specific routine.. 3725.16 BogoMIPS (lpj=1862581)
Jul 16 08:58:53 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jul 16 08:58:53 localhost kernel: CPU: L2 cache: 1024K
Jul 16 08:58:53 localhost kernel: CPU: Physical Processor ID: 0
Jul 16 08:58:53 localhost kernel: CPU: Processor Core ID: 1
Jul 16 08:58:53 localhost kernel: Intel machine check architecture supported.
Jul 16 08:58:53 localhost kernel: Intel machine check reporting enabled on CPU#1.
Jul 16 08:58:53 localhost kernel: CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
Jul 16 08:58:53 localhost kernel: Total of 2 processors activated (7453.71 BogoMIPS).
Jul 16 08:58:53 localhost kernel: ENABLING IO-APIC IRQs
Jul 16 08:58:53 localhost kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jul 16 08:58:53 localhost kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jul 16 08:58:53 localhost kernel: Brought up 2 CPUs
Jul 16 08:58:53 localhost kernel: net_namespace: 548 bytes
Jul 16 08:58:53 localhost kernel: NET: Registered protocol family 16
Jul 16 08:58:53 localhost kernel: ACPI: bus type pci registered
Jul 16 08:58:53 localhost kernel: PCI: Using MMCONFIG for extended config space
Jul 16 08:58:53 localhost kernel: PCI: Using configuration type 1
Jul 16 08:58:53 localhost kernel: Setting up standard PCI resources
Jul 16 08:58:53 localhost kernel: ACPI: EC: Look up EC in DSDT
Jul 16 08:58:53 localhost kernel: ACPI: BIOS _OSI(Linux) query ignored via DMI
Jul 16 08:58:53 localhost kernel: ACPI: Interpreter enabled
Jul 16 08:58:53 localhost kernel: ACPI: (supports S0 S3 S4 S5)
Jul 16 08:58:53 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Jul 16 08:58:53 localhost kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Jul 16 08:58:53 localhost kernel: ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Jul 16 08:58:53 localhost kernel: ACPI: EC: driver started in interrupt mode
Jul 16 08:58:53 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 16 08:58:53 localhost kernel: pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Jul 16 08:58:53 localhost kernel: pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
Jul 16 08:58:53 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
Jul 16 08:58:53 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 16 08:58:53 localhost kernel: pnp: PnP ACPI init
Jul 16 08:58:53 localhost kernel: ACPI: bus type pnp registered
Jul 16 08:58:53 localhost kernel: pnp: PnP ACPI: found 11 devices
Jul 16 08:58:53 localhost kernel: ACPI: ACPI bus type pnp unregistered
Jul 16 08:58:53 localhost kernel: PnPBIOS: Disabled by ACPI PNP
Jul 16 08:58:53 localhost kernel: PCI: Using ACPI for IRQ routing
Jul 16 08:58:53 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jul 16 08:58:53 localhost kernel: NetLabel: Initializing
Jul 16 08:58:53 localhost kernel: NetLabel: domain hash size = 128
Jul 16 08:58:53 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Jul 16 08:58:53 localhost kernel: NetLabel: unlabeled traffic allowed by default
Jul 16 08:58:53 localhost kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jul 16 08:58:53 localhost kernel: hpet0: 3 64-bit timers, 14318180 Hz
Jul 16 08:58:53 localhost kernel: ACPI: RTC can wake from S4
Jul 16 08:58:53 localhost kernel: system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:02: iomem range 0xfed20000-0xfed3ffff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:02: iomem range 0xfed40000-0xfed44fff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:02: iomem range 0xfed45000-0xfed8ffff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Jul 16 08:58:53 localhost kernel: system 00:06: ioport range 0x380-0x383 has been reserved
Jul 16 08:58:53 localhost kernel: system 00:06: ioport range 0x680-0x69f has been reserved
Jul 16 08:58:53 localhost kernel: system 00:06: ioport range 0x800-0x80f has been reserved
Jul 16 08:58:53 localhost kernel: system 00:06: ioport range 0x1000-0x107f has been reserved
Jul 16 08:58:53 localhost kernel: system 00:06: ioport range 0x1180-0x11bf has been reserved
Jul 16 08:58:53 localhost kernel: system 00:06: ioport range 0x1640-0x164f has been reserved
Jul 16 08:58:53 localhost kernel: system 00:07: ioport range 0x6a0-0x6af has been reserved
Jul 16 08:58:53 localhost kernel: system 00:07: ioport range 0x6b0-0x6ff has been reserved
Jul 16 08:58:53 localhost kernel: Switched to high resolution mode on CPU 1
Jul 16 08:58:53 localhost kernel: Switched to high resolution mode on CPU 0
Jul 16 08:58:53 localhost kernel: PCI: Bridge: 0000:00:1c.0
Jul 16 08:58:53 localhost kernel: IO window: 2000-2fff
Jul 16 08:58:53 localhost kernel: MEM window: 0xd6000000-0xd7ffffff
Jul 16 08:58:53 localhost kernel: PREFETCH window: 0x00000000d2000000-0x00000000d3ffffff
Jul 16 08:58:53 localhost kernel: PCI: Bridge: 0000:00:1c.1
Jul 16 08:58:53 localhost kernel: IO window: 3000-3fff
Jul 16 08:58:53 localhost kernel: MEM window: 0xd4000000-0xd5ffffff
Jul 16 08:58:53 localhost kernel: PREFETCH window: 0x00000000d0000000-0x00000000d1ffffff
Jul 16 08:58:53 localhost kernel: PCI: Bridge: 0000:00:1e.0
Jul 16 08:58:53 localhost kernel: IO window: 4000-4fff
Jul 16 08:58:53 localhost kernel: MEM window: 0xd8000000-0xd80fffff
Jul 16 08:58:53 localhost kernel: PREFETCH window: disabled.
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jul 16 08:58:53 localhost kernel: PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jul 16 08:58:53 localhost kernel: NET: Registered protocol family 2
Jul 16 08:58:53 localhost kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 16 08:58:53 localhost kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jul 16 08:58:53 localhost kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jul 16 08:58:53 localhost kernel: TCP: Hash tables configured (established 131072 bind 65536)
Jul 16 08:58:53 localhost kernel: TCP reno registered
Jul 16 08:58:53 localhost kernel: Unpacking initramfs... done
Jul 16 08:58:53 localhost kernel: Freeing initrd memory: 7031k freed
Jul 16 08:58:53 localhost kernel: Simple Boot Flag at 0x35 set to 0x1
Jul 16 08:58:53 localhost kernel: audit: initializing netlink socket (disabled)
Jul 16 08:58:53 localhost kernel: type=2000 audit(1216198691.850:1): initialized
Jul 16 08:58:53 localhost kernel: highmem bounce pool size: 64 pages
Jul 16 08:58:53 localhost kernel: Total HugeTLB memory allocated, 0
Jul 16 08:58:53 localhost kernel: VFS: Disk quotas dquot_6.5.1
Jul 16 08:58:53 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 16 08:58:53 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Jul 16 08:58:53 localhost kernel: io scheduler noop registered
Jul 16 08:58:53 localhost kernel: io scheduler anticipatory registered
Jul 16 08:58:53 localhost kernel: io scheduler deadline registered
Jul 16 08:58:53 localhost kernel: io scheduler cfq registered (default)
Jul 16 08:58:53 localhost kernel: pci 0000:00:02.0: Boot video device
Jul 16 08:58:53 localhost kernel: pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jul 16 08:58:53 localhost kernel: assign_interrupt_mode Found MSI capability
Jul 16 08:58:53 localhost kernel: Allocate Port Service[0000:00:1c.0:pcie00]
Jul 16 08:58:53 localhost kernel: Allocate Port Service[0000:00:1c.0:pcie02]
Jul 16 08:58:53 localhost kernel: Allocate Port Service[0000:00:1c.0:pcie03]
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jul 16 08:58:53 localhost kernel: assign_interrupt_mode Found MSI capability
Jul 16 08:58:53 localhost kernel: Allocate Port Service[0000:00:1c.1:pcie00]
Jul 16 08:58:53 localhost kernel: Allocate Port Service[0000:00:1c.1:pcie02]
Jul 16 08:58:53 localhost kernel: Allocate Port Service[0000:00:1c.1:pcie03]
Jul 16 08:58:53 localhost kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 7872k
Jul 16 08:58:53 localhost kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=4
Jul 16 08:58:53 localhost kernel: vesafb: scrolling: redraw
Jul 16 08:58:53 localhost kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Jul 16 08:58:53 localhost kernel: fbcon: VESA VGA (fb0) is primary device
Jul 16 08:58:53 localhost kernel: Console: switching to colour frame buffer device 128x48
Jul 16 08:58:53 localhost kernel: fb0: VESA VGA frame buffer device
Jul 16 08:58:53 localhost kernel: isapnp: Scanning for PnP cards...
Jul 16 08:58:53 localhost kernel: isapnp: No Plug & Play device found
Jul 16 08:58:53 localhost kernel: hpet_resources: 0xfed00000 is busy
Jul 16 08:58:53 localhost kernel: Linux agpgart interface v0.103
Jul 16 08:58:53 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jul 16 08:58:53 localhost kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Jul 16 08:58:53 localhost kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jul 16 08:58:53 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 16 08:58:53 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 16 08:58:53 localhost kernel: mice: PS/2 mouse device common for all mice
Jul 16 08:58:53 localhost kernel: cpuidle: using governor ladder
Jul 16 08:58:53 localhost kernel: cpuidle: using governor menu
Jul 16 08:58:53 localhost kernel: TCP cubic registered
Jul 16 08:58:53 localhost kernel: NET: Registered protocol family 1
Jul 16 08:58:53 localhost kernel: Using IPI No-Shortcut mode
Jul 16 08:58:53 localhost kernel: registered taskstats version 1
Jul 16 08:58:53 localhost kernel: Freeing unused kernel memory: 264k freed
Jul 16 08:58:53 localhost kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Jul 16 08:58:53 localhost kernel: ACPI: SSDT 3F67C09B, 027A (r1 HP 30BB 3000 INTL 20050624)
Jul 16 08:58:53 localhost kernel: ACPI: SSDT 3F67BB54, 04C2 (r1 HP 30BB 3001 INTL 20050624)
Jul 16 08:58:53 localhost kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Jul 16 08:58:53 localhost kernel: ACPI: ACPI0007:00 is registered as cooling_device0
Jul 16 08:58:53 localhost kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Jul 16 08:58:53 localhost kernel: ACPI: SSDT 3F67C315, 00C8 (r1 HP 30BB 3000 INTL 20050624)
Jul 16 08:58:53 localhost kernel: ACPI: SSDT 3F67C016, 0085 (r1 HP 30BB 3000 INTL 20050624)
Jul 16 08:58:53 localhost kernel: Marking TSC unstable due to: TSC halts in idle.
Jul 16 08:58:53 localhost kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Jul 16 08:58:53 localhost kernel: ACPI: ACPI0007:01 is registered as cooling_device1
Jul 16 08:58:53 localhost kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Jul 16 08:58:53 localhost kernel: ACPI: LNXTHERM:01 is registered as thermal_zone0
Jul 16 08:58:53 localhost kernel: ACPI: Thermal Zone [THR1] (50 C)
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:02:00.0 to 64
Jul 16 08:58:53 localhost kernel: ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
Jul 16 08:58:53 localhost kernel: usbcore: registered new interface driver usbfs
Jul 16 08:58:53 localhost kernel: usbcore: registered new interface driver hub
Jul 16 08:58:53 localhost kernel: No dock devices found.
Jul 16 08:58:53 localhost kernel: usbcore: registered new device driver usb
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jul 16 08:58:53 localhost kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jul 16 08:58:53 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Jul 16 08:58:53 localhost kernel: ehci_hcd 0000:00:1d.7: debug port 1
Jul 16 08:58:53 localhost kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jul 16 08:58:53 localhost kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8444000
Jul 16 08:58:53 localhost kernel: USB Universal Host Controller Interface driver v3.0
Jul 16 08:58:53 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 16 08:58:53 localhost kernel: usb usb1: configuration #1 chosen from 1 choice
Jul 16 08:58:53 localhost kernel: hub 1-0:1.0: USB hub found
Jul 16 08:58:53 localhost kernel: hub 1-0:1.0: 8 ports detected
Jul 16 08:58:53 localhost kernel: SCSI subsystem initialized
Jul 16 08:58:53 localhost kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
Jul 16 08:58:53 localhost kernel: e100: Copyright(c) 1999-2006 Intel Corporation
Jul 16 08:58:53 localhost kernel: libata version 3.00 loaded.
Jul 16 08:58:53 localhost kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jul 16 08:58:53 localhost kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 08:58:53 localhost kernel: usb usb1: Product: EHCI Host Controller
Jul 16 08:58:53 localhost kernel: usb usb1: Manufacturer: Linux 2.6.25-4.slh.2-sidux-686 ehci_hcd
Jul 16 08:58:53 localhost kernel: usb usb1: SerialNumber: 0000:00:1d.7
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 20
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:05:08.0 to 64
Jul 16 08:58:53 localhost kernel: e100: eth0: e100_probe: addr 0xd8000000, irq 20, MAC addr 00:1b:24:82:1d:2c
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
Jul 16 08:58:53 localhost kernel: usb usb2: configuration #1 chosen from 1 choice
Jul 16 08:58:53 localhost kernel: hub 2-0:1.0: USB hub found
Jul 16 08:58:53 localhost kernel: hub 2-0:1.0: 2 ports detected
Jul 16 08:58:53 localhost kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 16 08:58:53 localhost kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jul 16 08:58:53 localhost kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 08:58:53 localhost kernel: usb usb2: Product: UHCI Host Controller
Jul 16 08:58:53 localhost kernel: usb usb2: Manufacturer: Linux 2.6.25-4.slh.2-sidux-686 uhci_hcd
Jul 16 08:58:53 localhost kernel: usb usb2: SerialNumber: 0000:00:1d.0
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
Jul 16 08:58:53 localhost kernel: usb usb3: configuration #1 chosen from 1 choice
Jul 16 08:58:53 localhost kernel: hub 3-0:1.0: USB hub found
Jul 16 08:58:53 localhost kernel: hub 3-0:1.0: 2 ports detected
Jul 16 08:58:53 localhost kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jul 16 08:58:53 localhost kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 08:58:53 localhost kernel: usb usb3: Product: UHCI Host Controller
Jul 16 08:58:53 localhost kernel: usb usb3: Manufacturer: Linux 2.6.25-4.slh.2-sidux-686 uhci_hcd
Jul 16 08:58:53 localhost kernel: usb usb3: SerialNumber: 0000:00:1d.1
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
Jul 16 08:58:53 localhost kernel: usb usb4: configuration #1 chosen from 1 choice
Jul 16 08:58:53 localhost kernel: hub 4-0:1.0: USB hub found
Jul 16 08:58:53 localhost kernel: hub 4-0:1.0: 2 ports detected
Jul 16 08:58:53 localhost kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jul 16 08:58:53 localhost kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 08:58:53 localhost kernel: usb usb4: Product: UHCI Host Controller
Jul 16 08:58:53 localhost kernel: usb usb4: Manufacturer: Linux 2.6.25-4.slh.2-sidux-686 uhci_hcd
Jul 16 08:58:53 localhost kernel: usb usb4: SerialNumber: 0000:00:1d.2
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Jul 16 08:58:53 localhost kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
Jul 16 08:58:53 localhost kernel: usb usb5: configuration #1 chosen from 1 choice
Jul 16 08:58:53 localhost kernel: hub 5-0:1.0: USB hub found
Jul 16 08:58:53 localhost kernel: hub 5-0:1.0: 2 ports detected
Jul 16 08:58:53 localhost kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Jul 16 08:58:53 localhost kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 16 08:58:53 localhost kernel: usb usb5: Product: UHCI Host Controller
Jul 16 08:58:53 localhost kernel: usb usb5: Manufacturer: Linux 2.6.25-4.slh.2-sidux-686 uhci_hcd
Jul 16 08:58:53 localhost kernel: usb usb5: SerialNumber: 0000:00:1d.3
Jul 16 08:58:53 localhost kernel: ahci 0000:00:1f.2: version 3.0
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Jul 16 08:58:53 localhost kernel: Clocksource tsc unstable (delta = -289138965 ns)
Jul 16 08:58:53 localhost kernel: ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
Jul 16 08:58:53 localhost kernel: ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jul 16 08:58:53 localhost kernel: scsi0 : ahci
Jul 16 08:58:53 localhost kernel: scsi1 : ahci
Jul 16 08:58:53 localhost kernel: scsi2 : ahci
Jul 16 08:58:53 localhost kernel: scsi3 : ahci
Jul 16 08:58:53 localhost kernel: ata1: SATA max UDMA/133 abar m1024@0xd8444400 port 0xd8444500 irq 221
Jul 16 08:58:53 localhost kernel: ata2: DUMMY
Jul 16 08:58:53 localhost kernel: ata3: SATA max UDMA/133 abar m1024@0xd8444400 port 0xd8444600 irq 221
Jul 16 08:58:53 localhost kernel: ata4: DUMMY
Jul 16 08:58:53 localhost kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 16 08:58:53 localhost kernel: ata1.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max UDMA/100
Jul 16 08:58:53 localhost kernel: ata1.00: 312581808 sectors, multi 16: LBA48
Jul 16 08:58:53 localhost kernel: ata1.00: configured for UDMA/100
Jul 16 08:58:53 localhost kernel: ata3: SATA link down (SStatus 0 SControl 300)
Jul 16 08:58:53 localhost kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 04.0 PQ: 0 ANSI: 5
Jul 16 08:58:53 localhost kernel: ata_piix 0000:00:1f.1: version 2.12
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64
Jul 16 08:58:53 localhost kernel: scsi4 : ata_piix
Jul 16 08:58:53 localhost kernel: scsi5 : ata_piix
Jul 16 08:58:53 localhost kernel: ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
Jul 16 08:58:53 localhost kernel: ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
Jul 16 08:58:53 localhost kernel: ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0A17, max MWDMA2
Jul 16 08:58:53 localhost kernel: ata5.00: configured for MWDMA2
Jul 16 08:58:53 localhost kernel: ata6: port disabled. ignoring.
Jul 16 08:58:53 localhost kernel: scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M 0A17 PQ: 0 ANSI: 5
Jul 16 08:58:53 localhost kernel: Driver 'sd' needs updating - please use bus_type methods
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 16 08:58:53 localhost kernel: sda:<4>Driver 'sr' needs updating - please use bus_type methods
Jul 16 08:58:53 localhost kernel: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jul 16 08:58:53 localhost kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jul 16 08:58:53 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Jul 16 08:58:53 localhost kernel: sr 4:0:0:0: Attached scsi CD-ROM sr0
Jul 16 08:58:53 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jul 16 08:58:53 localhost kernel: sr 4:0:0:0: Attached scsi generic sg1 type 5
Jul 16 08:58:53 localhost kernel: device-mapper: uevent: version 1.0.3
Jul 16 08:58:53 localhost kernel: device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
Jul 16 08:58:53 localhost kernel: PM: Starting manual resume from disk
Jul 16 08:58:53 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jul 16 08:58:53 localhost kernel: kjournald starting. Commit interval 5 seconds
Jul 16 08:58:53 localhost kernel: udevd version 124 started
Jul 16 08:58:53 localhost kernel: agpgart: Detected an Intel 945GM Chipset.
Jul 16 08:58:53 localhost kernel: agpgart: Detected 7932K stolen memory.
Jul 16 08:58:53 localhost kernel: agpgart: AGP aperture is 256M @ 0xc0000000
Jul 16 08:58:53 localhost kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Jul 16 08:58:53 localhost kernel: ACPI: Power Button (FF) [PWRF]
Jul 16 08:58:53 localhost kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Jul 16 08:58:53 localhost kernel: ACPI: Power Button (CM) [PWRB]
Jul 16 08:58:53 localhost kernel: input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
Jul 16 08:58:53 localhost kernel: ACPI: Sleep Button (CM) [SLPB]
Jul 16 08:58:53 localhost kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
Jul 16 08:58:53 localhost kernel: ACPI: Lid Switch [LID]
Jul 16 08:58:53 localhost kernel: ACPI: Battery Slot [BAT0] (battery absent)
Jul 16 08:58:53 localhost kernel: ACPI: AC Adapter [ACAD] (on-line)
Jul 16 08:58:53 localhost kernel: ACPI: WMI: Mapper loaded
Jul 16 08:58:53 localhost kernel: b43-phy0: Broadcom 4311 WLAN found
Jul 16 08:58:53 localhost kernel: phy0: Selected rate control algorithm 'pid'
Jul 16 08:58:53 localhost kernel: ACPI: device:05 is registered as cooling_device2
Jul 16 08:58:53 localhost kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
Jul 16 08:58:53 localhost kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Jul 16 08:58:53 localhost kernel: ACPI: device:0b is registered as cooling_device3
Jul 16 08:58:53 localhost kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input7
Jul 16 08:58:53 localhost kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
Jul 16 08:58:53 localhost kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64
Jul 16 08:58:53 localhost kernel: iTCO_vendor_support: vendor-support=0
Jul 16 08:58:53 localhost kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Jul 16 08:58:53 localhost kernel: iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
Jul 16 08:58:53 localhost kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jul 16 08:58:53 localhost kernel: Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
Jul 16 08:58:53 localhost kernel: input: PC Speaker as /devices/platform/pcspkr/input/input8
Jul 16 08:58:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
Jul 16 08:58:53 localhost kernel: Real Time Clock Driver v1.12ac
Jul 16 08:58:53 localhost kernel: intel_rng: FWH not detected
Jul 16 08:58:53 localhost kernel: Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
Jul 16 08:58:53 localhost kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
Jul 16 08:58:53 localhost kernel: Adding 2104504k swap on /dev/sda2. Priority:-1 extents:1 across:2104504k
Jul 16 08:58:53 localhost kernel: EXT3 FS on sda6, internal journal
Jul 16 08:58:53 localhost kernel: Linux video capture interface: v2.00
Jul 16 08:58:53 localhost kernel: bttv: driver version 0.9.17 loaded
Jul 16 08:58:53 localhost kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Jul 16 08:58:53 localhost kernel: bt878: AUDIO driver version 0.0.0 loaded
Jul 16 08:58:53 localhost kernel: dib0700: loaded with support for 7 different device-types
Jul 16 08:58:53 localhost rsyslogd: [origin software="rsyslogd" swVersion="3.16.2" x-pid="2705" x-info="http://www.rsyslog.com"] restart
Jul 16 08:58:53 localhost kernel: usbcore: registered new interface driver dvb_usb_dib0700
Jul 16 08:58:53 localhost kernel: fuse init (API version 7.9)
Jul 16 08:58:53 localhost kernel: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jul 16 08:58:53 localhost kernel: kjournald starting. Commit interval 5 seconds
Jul 16 08:58:53 localhost kernel: EXT3 FS on sda3, internal journal
Jul 16 08:58:53 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jul 16 08:58:53 localhost kernel: kjournald starting. Commit interval 5 seconds
Jul 16 08:58:53 localhost kernel: EXT3 FS on sda5, internal journal
Jul 16 08:58:53 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jul 16 08:58:53 localhost kernel: kjournald starting. Commit interval 5 seconds
Jul 16 08:58:53 localhost kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jul 16 08:58:53 localhost kernel: EXT3 FS on sda7, internal journal
Jul 16 08:58:53 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jul 16 08:58:53 localhost kernel: kjournald starting. Commit interval 5 seconds
Jul 16 08:58:53 localhost kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jul 16 08:58:53 localhost kernel: EXT3 FS on sda8, internal journal
Jul 16 08:58:53 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jul 16 08:58:53 localhost kernel: kjournald starting. Commit interval 5 seconds
Jul 16 08:58:53 localhost kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jul 16 08:58:53 localhost kernel: EXT3 FS on sda9, internal journal
Jul 16 08:58:53 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jul 16 08:58:53 localhost kernel: input: b43-phy0 as /devices/virtual/input/input10
Jul 16 08:58:53 localhost kernel: b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Jul 16 08:58:53 localhost kernel: Registered led device: b43-phy0::tx
Jul 16 08:58:53 localhost kernel: Registered led device: b43-phy0::rx
Jul 16 08:58:53 localhost kernel: Registered led device: b43-phy0::radio
Jul 16 08:58:53 localhost kernel: input: b43-phy0 as /devices/virtual/input/input11
Jul 16 08:58:53 localhost kernel: b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Jul 16 08:58:53 localhost kernel: Registered led device: b43-phy0::tx
Jul 16 08:58:53 localhost kernel: Registered led device: b43-phy0::rx
Jul 16 08:58:53 localhost kernel: Registered led device: b43-phy0::radio
Jul 16 08:58:53 localhost kernel: NET: Registered protocol family 17
Jul 16 08:58:53 localhost kernel: wlan0: Initial auth_alg=0
Jul 16 08:58:53 localhost kernel: wlan0: authenticate with AP 00:11:24:0a:cb:d7
Jul 16 08:58:53 localhost kernel: wlan0: RX authentication from 00:11:24:0a:cb:d7 (alg=0 transaction=2 status=0)
Jul 16 08:58:53 localhost kernel: wlan0: authenticated
Jul 16 08:58:53 localhost kernel: wlan0: associate with AP 00:11:24:0a:cb:d7
Jul 16 08:58:53 localhost kernel: wlan0: RX AssocResp from 00:11:24:0a:cb:d7 (capab=0x401 status=0 aid=5)
Jul 16 08:58:53 localhost kernel: wlan0: associated
Jul 16 08:58:53 localhost kernel: wlan0: switched to short barker preamble (BSSID=00:11:24:0a:cb:d7)
Jul 16 08:58:53 localhost kernel: NET: Registered protocol family 10
Jul 16 08:58:53 localhost kernel: lo: Disabled Privacy Extensions
Jul 16 08:58:53 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 16 08:58:56 localhost ifd[2804]: starting
Jul 16 08:58:56 localhost ifd: PID file written: /var/run/ifd.pid
Jul 16 08:58:56 localhost ifd[2804]: executing: '/usr/share/laptop-net/link-change eth0 managed unknown up,running,disconnected'
Jul 16 08:58:56 localhost battery-stats-collector[2841]: apm_read failed with error code 1
Jul 16 08:58:56 localhost laptop-net: Stopping network interface "eth0"
Jul 16 08:58:56 localhost dhclient: Internet Systems Consortium DHCP Client V3.1.1
Jul 16 08:58:56 localhost ifd[2804]: + Internet Systems Consortium DHCP Client V3.1.1
Jul 16 08:58:56 localhost dhclient: Copyright 2004-2008 Internet Systems Consortium.
Jul 16 08:58:56 localhost ifd[2804]: + Copyright 2004-2008 Internet Systems Consortium.
Jul 16 08:58:56 localhost dhclient: All rights reserved.
Jul 16 08:58:56 localhost ifd[2804]: + All rights reserved.
Jul 16 08:58:56 localhost dhclient: For info, please visit http://www.isc.org/sw/dhcp/
Jul 16 08:58:56 localhost ifd[2804]: + For info, please visit http://www.isc.org/sw/dhcp/
Jul 16 08:58:56 localhost dhclient:
Jul 16 08:58:56 localhost ifd[2804]: +
Jul 16 08:58:56 localhost dhclient: wmaster0: unknown hardware address type 801
Jul 16 08:58:56 localhost ifd[2804]: + wmaster0: unknown hardware address type 801
Jul 16 08:58:56 localhost dhclient: wmaster0: unknown hardware address type 801
Jul 16 08:58:56 localhost ifd[2804]: + wmaster0: unknown hardware address type 801
Jul 16 08:58:56 localhost dhclient: Listening on LPF/eth0/00:1b:24:82:1d:2c
Jul 16 08:58:56 localhost ifd[2804]: + Listening on LPF/eth0/00:1b:24:82:1d:2c
Jul 16 08:58:56 localhost dhclient: Sending on LPF/eth0/00:1b:24:82:1d:2c
Jul 16 08:58:56 localhost ifd[2804]: + Sending on LPF/eth0/00:1b:24:82:1d:2c
Jul 16 08:58:56 localhost dhclient: Sending on Socket/fallback
Jul 16 08:58:56 localhost ifd[2804]: + Sending on Socket/fallback
Jul 16 08:58:57 localhost dhclient: DHCPRELEASE on eth0 to 192.168.0.100 port 67
Jul 16 08:58:57 localhost ifd[2804]: + DHCPRELEASE on eth0 to 192.168.0.100 port 67
Jul 16 08:58:58 localhost cpufreqd: pmu_init : /proc/pmu/info: No such file or directory
Jul 16 08:58:58 localhost cpufreqd: apm_init : /proc/apm: No such file or directory
Jul 16 08:58:58 localhost cpufreqd: nforce2_post_conf : Unconfigured, exiting.
Jul 16 08:58:58 localhost cpufreqd: plugins_post_conf : Unable to configure plugin nforce2_atxp1, removing
Jul 16 08:58:58 localhost acpid: client connected from 2953[0:0]
Jul 16 08:58:58 localhost kernel: lp: driver loaded but no devices found
Jul 16 08:58:58 localhost kernel: ppdev: user-space parallel port driver
Jul 16 08:58:59 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 16 08:59:00 localhost /usr/sbin/gpm[3008]: *** info [daemon/startup.c(131)]:
Jul 16 08:59:00 localhost /usr/sbin/gpm[3008]: Started gpm successfully. Entered daemon mode.
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//log.0000000001, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//log.0000000001, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.00, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.00, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.01, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.01, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.02, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.02, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.03, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.03, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.04, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.04, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.05, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.05, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.06, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.06, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.07, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.07, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.08, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.08, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.09, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.09, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.0a, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.0a, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.0b, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.0b, CTDLUID, -1) returned 0
Jul 16 08:59:00 localhost citadel: chmod(/var/lib/citadel/data//cdb.0c, 0600) returned 0
Jul 16 08:59:00 localhost citadel: chown(/var/lib/citadel/data//cdb.0c, CTDLUID, -1) returned 0
Jul 16 08:59:01 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:03 localhost vdr-kbd: [3087] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:03 localhost kernel: warning: `vdr-kbd' uses 32-bit capabilities (legacy support in use)
Jul 16 08:59:03 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:03 localhost vdr-kbd: [3104] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:03 localhost vdr-kbd: [3107] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:03 localhost vdr-kbd: [3110] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:03 localhost vdr-kbd: [3113] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3116] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3119] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3122] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3125] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3128] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3131] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3134] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3137] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3140] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3143] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3146] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr-kbd: [3198] cTimeMs: using monotonic clock (resolution is 1 ns)
Jul 16 08:59:04 localhost vdr: [3198] VDR version 1.6.0-1 started
Jul 16 08:59:04 localhost vdr: [3198] switched to user 'vdr'
Jul 16 08:59:04 localhost vdr: [3198] codeset is 'ANSI_X3.4-1968' - unknown
Jul 16 08:59:06 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:06 localhost vdr: [3198] found 0 locales in /usr/share/locale
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'deu,ger'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'slv,slo'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'ita'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'dut,nla,nld'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'por'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'fra,fre'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'nor'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'fin,smi'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'pol'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'esl,spa'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'ell,gre'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'sve,swe'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'rom,rum'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'hun'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'cat,cln'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'rus'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'hrv'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'est'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'dan'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'cze,ces'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'tur'
Jul 16 08:59:06 localhost vdr: [3198] no locale for language code 'ukr'
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-conflictcheckonly.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-xineliboutput.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] [xine..put] Listening on address '127.0.0.1' port 37890
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-reelchannelscan.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-wirbelscan.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-nordlichtsepg.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-epgsearchonly.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-epgsearch.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-quickepgsearch.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-text2skin.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-live.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-autotimeredit.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-prefermenu.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading plugin: /usr/lib/vdr/plugins/libvdr-timeline.so.1.6.0
Jul 16 08:59:06 localhost vdr: [3198] loading /var/lib/vdr/setup.conf
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: DisableVPS = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: DoubleEpgAction = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: DoubleEpgTimeDelta = 15
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: JumpPlay = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: LoadMarksInterval = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: MenuButtonCloses = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: MenuCmdPosition = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: MixEpgAction = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: noEPG =
Jul 16 08:59:07 localhost vdr: [3198] unknown locale: '1'
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: PlayJump = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: ShowRecDate = 1
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: ShowRecLength = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: ShowRecTime = 1
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: TrayOpenOnBegin = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: TrayOpenOnEnd = 0
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: WarEagleIcons = 1
Jul 16 08:59:07 localhost vdr: [3198] [xine..put] Skipping configuration entry Frontend= (overridden in command line)
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: xineliboutput.OSD.Downscale = 1
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: xineliboutput.OSD.Prescale = 1
Jul 16 08:59:07 localhost vdr: [3198] ERROR: unknown config parameter: xineliboutput.OSD.UnscaledOpaque = 0
Jul 16 08:59:07 localhost vdr: [3198] [xine..put] Skipping configuration entry RemoteMode=1 (overridden in command line)
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/sources.conf
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/diseqc.conf
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/channels.conf
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/timers.conf
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/commands.conf
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/reccmds.conf
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/svdrphosts.conf
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/remote.conf
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/keymacros.conf
Jul 16 08:59:07 localhost vdr: [3228] video directory scanner thread started (pid=3198, tid=3228)
Jul 16 08:59:07 localhost vdr: [3227] video directory scanner thread started (pid=3198, tid=3227)
Jul 16 08:59:07 localhost vdr: [3198] reading EPG data from /var/cache/vdr/epg.data
Jul 16 08:59:07 localhost vdr: [3228] video directory scanner thread ended (pid=3198, tid=3228)
Jul 16 08:59:07 localhost vdr: [3198] no DVB device found
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: conflictcheckonly (0.0.1): Direct access to epgsearch's conflict check menu
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: xineliboutput (1.0.1): X11/xine-lib output plugin
Jul 16 08:59:07 localhost vdr: [3198] [xine..put] cTimePts: clock_gettime(CLOCK_MONOTONIC): clock resolution 0 us
Jul 16 08:59:07 localhost vdr: [3198] [xine..put] cTimePts: using monotonic clock
Jul 16 08:59:07 localhost vdr: [3198] [xine..put] RTP SSRC: 0x7895ecd1
Jul 16 08:59:07 localhost vdr: [3229] ERROR (thread.c,224): Permission denied
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: reelchannelscan (0.4.3): Search Transponders for DVB Channels
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: wirbelscan (0.0.4): dvb c/t/s/analog scan
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: osdteletext (0.5.1): Displays teletext on the OSD
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: tvonscreen (1.0.141): Shows the EPG info in form of a typical TV magazine
Jul 16 08:59:07 localhost vdr: [3198] plugin 'tvonscreen' called obsolete function RegisterI18n()
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: nordlichtsepg (0.8a): Extended EPG
Jul 16 08:59:07 localhost vdr: [3198] plugin 'nordlichtsepg' called obsolete function RegisterI18n()
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: epgsearchonly (0.0.1): Direct access to epgsearch's search menu
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: epgsearch (0.9.24): search the EPG for repeats and more
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: quickepgsearch (0.0.1): Quick search for broadcasts
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: text2skin (1.1-cvs): Loader for text-based skins
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: live (0.2.0): Live Interactive VDR Environment
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: autotimeredit (0.1.8): OSD autotimer edit
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: prefermenu (0.6.6): Prefer Channel Menu
Jul 16 08:59:07 localhost vdr: [3198] initializing plugin: timeline (1.0.141): Show timer overview and collisions
Jul 16 08:59:07 localhost vdr: [3198] plugin 'timeline' called obsolete function RegisterI18n()
Jul 16 08:59:07 localhost vdr: [3198] ERROR: invalid primary device number: 2
Jul 16 08:59:07 localhost vdr: [3198] trying device number 1 instead
Jul 16 08:59:07 localhost vdr: [3198] setting primary device to 1
Jul 16 08:59:07 localhost vdr: [3198] assuming manual start of VDR
Jul 16 08:59:07 localhost vdr: [3198] SVDRP listening on port 2001
Jul 16 08:59:07 localhost vdr: [3198] setting current skin to "classic"
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/themes/classic-default.theme
Jul 16 08:59:07 localhost vdr: [3227] video directory scanner thread ended (pid=3198, tid=3227)
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: conflictcheckonly
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: xineliboutput
Jul 16 08:59:07 localhost vdr: [3230] Remote decoder/display server (cXinelibServer) thread started (pid=3198, tid=3230)
Jul 16 08:59:07 localhost vdr: [3230] ERROR (thread.c,224): Permission denied
Jul 16 08:59:07 localhost vdr: [3230] [xine..put] cXinelibServer: Can't set priority to SCHED_RR 2 [1,99]
Jul 16 08:59:07 localhost vdr: [3230] [xine..put] Binding server to 127.0.0.1:37890
Jul 16 08:59:07 localhost vdr: [3230] [xine..put] Listening on port 37890
Jul 16 08:59:07 localhost vdr: [3198] [xine..put] cXinelibDevice::StartDevice(): Device started
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: reelchannelscan
Jul 16 08:59:07 localhost vdr: [3198] plugin 'reelchannelscan' called obsolete function RegisterI18n()
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: wirbelscan
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: osdteletext
Jul 16 08:59:07 localhost vdr: [3198] plugin 'osdteletext' called obsolete function RegisterI18n()
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: tvonscreen
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: nordlichtsepg
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: epgsearchonly
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: epgsearch
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/plugins/epgsearch/epgsearchcats.conf
Jul 16 08:59:07 localhost vdr: [3198] loading /var/lib/vdr/plugins/epgsearch/epgsearchmenu.conf
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: quickepgsearch
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: text2skin
Jul 16 08:59:07 localhost vdr: [3231] EPGSearch: conflictcheck thread started (pid=3198, tid=3231)
Jul 16 08:59:07 localhost vdr: [3198] starting plugin: live
Jul 16 08:59:08 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:08 localhost vdr: [3198] LIVE: initial file cache has 82 entries and needs 307017 bytes of data!
Jul 16 08:59:08 localhost vdr: [3198] starting plugin: autotimeredit
Jul 16 08:59:08 localhost vdr: [3198] plugin 'autotimeredit' called obsolete function RegisterI18n()
Jul 16 08:59:08 localhost vdr: [3198] autotimeredit: INFO: config file not found: [/var/lib/vdr/plugins/]autotimeredit.conf
Jul 16 08:59:08 localhost vdr: [3198] autotimeredit: Start
Jul 16 08:59:08 localhost vdr: [3232] ERROR: /var/lib/vdr/plugins/live/live.pem: No such file or directory
Jul 16 08:59:08 localhost vdr: [3198] loading /var/lib/vdradmin-am/vdradmind.at
Jul 16 08:59:08 localhost vdr: [3198] starting plugin: prefermenu
Jul 16 08:59:08 localhost vdr: [3198] plugin 'prefermenu' called obsolete function RegisterI18n()
Jul 16 08:59:08 localhost vdr: [3198] starting plugin: timeline
Jul 16 08:59:08 localhost vdr: [3198] ERROR: /dev/lircd: No such file or directory
Jul 16 08:59:08 localhost vdr: [3198] ERROR: remote control LIRC not ready!
Jul 16 08:59:08 localhost vdr: [3198] switching to channel 7
Jul 16 08:59:08 localhost vdr: [3198] info: Channel not available!
Jul 16 08:59:08 localhost acpid: client connected from 3245[105:113]
Jul 16 08:59:09 localhost squid[3278]: Squid Parent: child process 3281 started
Jul 16 08:59:10 localhost vdr: [3198] setting watchdog timer to 60 seconds
Jul 16 08:59:10 localhost vdr: [3198] switching to channel 1
Jul 16 08:59:10 localhost vdr: [3198] info: Channel not available!
Jul 16 08:59:10 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:11 localhost anacron[3325]: Anacron 2.3 started on 2008-07-16
Jul 16 08:59:11 localhost anacron[3325]: Normal exit (0 jobs run)
Jul 16 08:59:11 localhost /usr/sbin/cron[3343]: (CRON) INFO (pidfile fd = 3)
Jul 16 08:59:11 localhost /usr/sbin/cron[3344]: (CRON) STARTUP (fork ok)
Jul 16 08:59:11 localhost /usr/sbin/cron[3344]: (CRON) INFO (Running @reboot jobs)
Jul 16 08:59:12 localhost vdr: [3198] max. latency time 2 seconds
Jul 16 08:59:12 localhost vdr: [3198] timer 1 (1 2012-2113 'Dr. House~Schlechter Scherz (1)') set to event Thu 17.07.2008 20:14-21:03 (VPS: 17.07 20:15) 'Dr. House'
Jul 16 08:59:12 localhost acpid: client connected from 3415[0:0]
Jul 16 08:59:13 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:15 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:15 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Jul 16 08:59:15 localhost kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul 16 08:59:15 localhost kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Jul 16 08:59:15 localhost kernel: [drm] Initialized i915 1.6.0 20060119 on minor 0
Jul 16 08:59:17 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:19 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:21 localhost vdr: [3198] switching to channel 1
Jul 16 08:59:21 localhost vdr: [3198] info: Channel not available!
Jul 16 08:59:21 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:23 localhost vdr: [3198] max. latency time 3 seconds
Jul 16 08:59:23 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:26 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:27 localhost vdr: [3231] EPGSearch: timer conflict check started
Jul 16 08:59:28 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:28 localhost vdr: [3198] info: 1 timer conflict(s)! First at 17.07 20:12. Show them?
Jul 16 08:59:30 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:32 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:34 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:36 localhost vdr: [3231] EPGSearch: timer conflict check finished
Jul 16 08:59:37 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:37 localhost vdr: [3198] switching to channel 1
Jul 16 08:59:37 localhost vdr: [3198] info: Channel not available!
Jul 16 08:59:39 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:39 localhost vdr: [3198] max. latency time 11 seconds
Jul 16 08:59:41 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 55 C
Jul 16 08:59:44 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 55 C
Jul 16 08:59:46 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:48 localhost vdr: [3198] switching to channel 1
Jul 16 08:59:48 localhost vdr: [3198] info: Channel not available!
Jul 16 08:59:48 localhost cpufreqd: cpufreqd_set_profile : Couldn't set profile "Performance Low" set for cpu0 (1600000-1600000-performance)
Jul 16 08:59:48 localhost cpufreqd: cpufreqd_loop : Cannot set policy, Rule unchanged ("AC Rule").
Jul 16 08:59:48 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:48 localhost python: hp-systray(init)[3663]: warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting.
Jul 16 08:59:51 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:53 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:56 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:56 localhost battery-stats-collector[2841]: apm_read failed with error code 1
Jul 16 08:59:58 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 08:59:59 localhost vdr: [3198] switching to channel 1
Jul 16 08:59:59 localhost vdr: [3198] info: Channel not available!
Jul 16 09:00:00 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:00:01 localhost /USR/SBIN/CRON[3764]: (www-data) CMD ([ -f /usr/share/moodle/admin/cron.php ] && /usr/bin/php -f /usr/share/moodle/admin/cron.php > /dev/null)
Jul 16 09:00:02 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:00:05 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:00:07 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:00:09 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:00:10 localhost vdr: [3198] switching to channel 1
Jul 16 09:00:10 localhost vdr: [3198] info: Channel not available!
Jul 16 09:00:10 localhost cpufreqd: cpufreqd_set_profile : Couldn't set profile "Performance Low" set for cpu0 (1600000-1600000-performance)
Jul 16 09:00:10 localhost cpufreqd: cpufreqd_loop : Cannot set policy, Rule unchanged ("AC Rule").
Jul 16 09:00:11 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:00:14 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:00:15 localhost kernel: usb 1-2: new high speed USB device using ehci_hcd and address 2
Jul 16 09:00:15 localhost kernel: usb 1-2: configuration #1 chosen from 1 choice
Jul 16 09:00:15 localhost kernel: dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
Jul 16 09:00:15 localhost kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Jul 16 09:00:15 localhost kernel: dib0700: firmware started successfully.
Jul 16 09:00:16 localhost kernel: dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
Jul 16 09:00:16 localhost kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jul 16 09:00:16 localhost kernel: DVB: registering new adapter (Hauppauge Nova-T Stick)
Jul 16 09:00:16 localhost kernel: DVB: registering frontend 0 (DiBcom 7000PC)...
Jul 16 09:00:16 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:00:16 localhost kernel: DiB0070: successfully identified
Jul 16 09:00:16 localhost kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/input/input12
Jul 16 09:00:16 localhost kernel: dvb-usb: schedule remote query interval to 150 msecs.
Jul 16 09:00:16 localhost kernel: dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
Jul 16 09:00:16 localhost kernel: usb 1-2: New USB device found, idVendor=2040, idProduct=7070
Jul 16 09:00:16 localhost kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 16 09:00:16 localhost kernel: usb 1-2: Product: Nova-T Stick
Jul 16 09:00:16 localhost kernel: usb 1-2: Manufacturer: Hauppauge
Jul 16 09:00:16 localhost kernel: usb 1-2: SerialNumber: 4031123577
Jul 16 09:00:21 localhost vdr: [3198] switching to channel 1
Jul 16 09:00:21 localhost vdr: [3198] info: Channel not available!
Jul 16 09:00:32 localhost vdr: [3198] switching to channel 1
Jul 16 09:00:32 localhost vdr: [3198] info: Channel not available!
Jul 16 09:00:43 localhost vdr: [3198] switching to channel 1
Jul 16 09:00:43 localhost vdr: [3198] info: Channel not available!
Jul 16 09:00:54 localhost vdr: [3198] switching to channel 1
Jul 16 09:00:54 localhost vdr: [3198] info: Channel not available!
Jul 16 09:00:55 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:00:55 localhost vdr: [3230] [xine..put] Client 0 connected: 127.0.0.1:45344
Jul 16 09:00:55 localhost vdr: [3230] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Jul 16 09:00:55 localhost vdr: [3230] [xine..put] Trying PIPE connection ...
Jul 16 09:00:55 localhost vdr: [3230] [xine..put] PIPE transport disabled in configuration
Jul 16 09:00:55 localhost vdr: [3230] [xine..put] Trying RTP connection ...
Jul 16 09:00:55 localhost vdr: [3230] [xine..put] RTP transports disabled
Jul 16 09:00:55 localhost vdr: [3230] [xine..put] Trying UDP connection ...
Jul 16 09:00:55 localhost vdr: [3230] [xine..put] Client address: 127.0.0.1
Jul 16 09:00:55 localhost vdr: [3230] [xine..put] setsockopt(SO_SNDBUF): got 262142 bytes
Jul 16 09:00:56 localhost battery-stats-collector[2841]: apm_read failed with error code 1
Jul 16 09:01:03 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:05 localhost vdr: [3198] switching to channel 1
Jul 16 09:01:05 localhost vdr: [3198] info: Channel not available!
Jul 16 09:01:16 localhost vdr: [3198] switching to channel 1
Jul 16 09:01:16 localhost vdr: [3198] info: Channel not available!
Jul 16 09:01:18 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:20 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:22 localhost vdr: [3198] switching to channel 1
Jul 16 09:01:22 localhost vdr: [3198] info: Channel not available!
Jul 16 09:01:24 localhost vdr: [3198] switching to channel 2
Jul 16 09:01:24 localhost vdr: [3198] info: Channel not available!
Jul 16 09:01:25 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:26 localhost vdr: [3198] switching to channel 3
Jul 16 09:01:26 localhost vdr: [3198] info: Channel not available!
Jul 16 09:01:27 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:27 localhost vdr: [3198] switching to channel 4
Jul 16 09:01:27 localhost vdr: [3198] info: Channel not available!
Jul 16 09:01:28 localhost vdr: [3198] switching to channel 5
Jul 16 09:01:28 localhost vdr: [3198] info: Channel not available!
Jul 16 09:01:29 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:30 localhost vdr: [3230] [xine..put] Closing connection 0
Jul 16 09:01:31 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:33 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:34 localhost vdr: [3230] [xine..put] Client 0 connected: 127.0.0.1:45346
Jul 16 09:01:34 localhost vdr: [3230] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Jul 16 09:01:34 localhost vdr: [3230] [xine..put] Trying PIPE connection ...
Jul 16 09:01:34 localhost vdr: [3230] [xine..put] PIPE transport disabled in configuration
Jul 16 09:01:34 localhost vdr: [3230] [xine..put] Trying RTP connection ...
Jul 16 09:01:34 localhost vdr: [3230] [xine..put] RTP transports disabled
Jul 16 09:01:34 localhost vdr: [3230] [xine..put] Trying UDP connection ...
Jul 16 09:01:34 localhost vdr: [3230] [xine..put] Client address: 127.0.0.1
Jul 16 09:01:34 localhost vdr: [3230] [xine..put] setsockopt(SO_SNDBUF): got 262142 bytes
Jul 16 09:01:35 localhost vdr: [3198] switching to channel 1
Jul 16 09:01:35 localhost vdr: [3198] info: Channel not available!
Jul 16 09:01:46 localhost vdr: [3198] switching to channel 1
Jul 16 09:01:46 localhost vdr: [3198] info: Channel not available!
Jul 16 09:01:53 localhost vdr: [3230] [xine..put] Closing connection 0
Jul 16 09:01:54 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:56 localhost battery-stats-collector[2841]: apm_read failed with error code 1
Jul 16 09:01:56 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:01:57 localhost vdr: [3198] switching to channel 1
Jul 16 09:01:57 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:08 localhost vdr: [3198] switching to channel 1
Jul 16 09:02:08 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:13 localhost vdr: [3230] [xine..put] Client 0 connected: 127.0.0.1:45349
Jul 16 09:02:13 localhost vdr: [3230] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Jul 16 09:02:13 localhost vdr: [3230] [xine..put] Trying PIPE connection ...
Jul 16 09:02:13 localhost vdr: [3230] [xine..put] PIPE transport disabled in configuration
Jul 16 09:02:13 localhost vdr: [3230] [xine..put] Trying RTP connection ...
Jul 16 09:02:13 localhost vdr: [3230] [xine..put] RTP transports disabled
Jul 16 09:02:13 localhost vdr: [3230] [xine..put] Trying UDP connection ...
Jul 16 09:02:13 localhost vdr: [3230] [xine..put] Client address: 127.0.0.1
Jul 16 09:02:13 localhost vdr: [3230] [xine..put] setsockopt(SO_SNDBUF): got 262142 bytes
Jul 16 09:02:19 localhost vdr: [3198] switching to channel 1
Jul 16 09:02:19 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:20 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:02:21 localhost vdr: [3198] switching to channel 2
Jul 16 09:02:21 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:22 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:02:22 localhost vdr: [3198] switching to channel 4
Jul 16 09:02:22 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:23 localhost vdr: [3198] switching to channel 6
Jul 16 09:02:23 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:24 localhost vdr: [3198] switching to channel 7
Jul 16 09:02:24 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:24 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:02:24 localhost vdr: [3198] switching to channel 6
Jul 16 09:02:24 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:25 localhost vdr: [3198] switching to channel 4
Jul 16 09:02:25 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:25 localhost vdr: [3198] switching to channel 4
Jul 16 09:02:25 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:25 localhost vdr: [3198] [xine..put] OSD bandwidth: 172035 bytes/s (1344 kbit/s)
Jul 16 09:02:25 localhost vdr: [3198] switching to channel 2
Jul 16 09:02:25 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:26 localhost vdr: [3198] switching to channel 1
Jul 16 09:02:26 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:28 localhost vdr: [3230] [xine..put] Closing connection 0
Jul 16 09:02:31 localhost vdr: [3198] switching to channel 1
Jul 16 09:02:31 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:42 localhost vdr: [3198] switching to channel 1
Jul 16 09:02:42 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:48 localhost cpufreqd: cpufreqd_set_profile : Couldn't set profile "Performance Low" set for cpu0 (1600000-1600000-performance)
Jul 16 09:02:48 localhost cpufreqd: cpufreqd_loop : Cannot set policy, Rule unchanged ("AC Rule").
Jul 16 09:02:53 localhost vdr: [3198] switching to channel 1
Jul 16 09:02:53 localhost vdr: [3198] info: Channel not available!
Jul 16 09:02:56 localhost battery-stats-collector[2841]: apm_read failed with error code 1
Jul 16 09:03:04 localhost vdr: [3198] switching to channel 1
Jul 16 09:03:04 localhost vdr: [3198] info: Channel not available!
Jul 16 09:03:15 localhost vdr: [3198] switching to channel 1
Jul 16 09:03:15 localhost vdr: [3198] info: Channel not available!
Jul 16 09:03:25 localhost hddtemp[3060]: /dev/sda: WDC WD1600BEVS-60RST0: 56 C
Jul 16 09:03:26 localhost vdr: [3198] switching to channel 1
Jul 16 09:03:26 localhost vdr: [3198] info: Channel not available!
Jul 16 09:03:37 localhost vdr: [3198] switching to channel 1
Jul 16 09:03:37 localhost vdr: [3198] info: Channel not available!

Zitat

Original von somebody
Hallo,

Eine richtige channels.conf für deine Region hast du ja sicher schon erstellt?

hallo nun ja eine halbrichtige hab ich: drei von sieben sender hab ich gesehen, die andern sind vorhanden, aber nicht sehbar :weinen, dh, kanalinfo ist vorhanden, aber kein bild.

less dmesg0738.txt | grep dvb
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

bitte schön
jetzt isses genau umgekhert, kaffeine ist dvbt-tot, vdr rennt!?

für ein kernelupdate: wollte eig. (die paar tage) warten bis der versionsprung des kernel für sidux sich niedergeschlagen hat,

hatte überraschenderweise noch wsan, von etobi installiert, mla runtergeommen, mal schaun

lg
p.

also vdr rennt jetzt konsistenter, mit allen programmen, kaffeine schient derweil vorerst nicht zu mögen,
lg
p

servus,
nein seriell, und jetzt fehlt nach einem reboot, wieder die hälfte der sender im vdr ( die ich schon sehen konnte,. kein update gemacht)
lg

sender sind da, werden aber in vdr manchmal nicht empfangen,lg

danke, wir sind gut abgedeckt hier, es liebt IMHO an der software:
es geht mit allen sendern
aber unter gnome, nach einem warmstart und und mit USBstick drinnenallsen (nicht einstöpseln)

für mich alles recht undurchsichtig
lg
p

(hüstel) mythtv hab ich derweil deinstalliert fällt mir ein
lg
willi

Zitat

Original von somebody
Der Deamon muss gestoppt werden, um mit Kaffeine auf die DVB Karte zuzugreifen.

danke, naja, wenn es doch so wäre, dann wäre ich beruhigt, weil wenigsten was fix ist. ich hab tatsächlich schon kaffeine gestartet und empfangen, ne den daemon zu stoppen, hab mir einbildet ein rmmod -a hülfe, vielleicht hat ja auch das einstöpselnt unter kde den daemon gestoppt,
nun ja,lg
p

danke für die vielen hilreichen hinweise
nochmal aber, woran kann es liegen das zB 3sat manchmal gar ned empfagen wird, ans schlechte wetter glauebe ich nicht-
und nach dem stoppen von vdr zeigt mir kaffeine alles (_alle_ sender :nichtdoof)

noch was vdr ändert manchmal sein outfit; zB der Channel-knopff im vdr-gui ändert sich manchmal von "graue streifen" auf "farbige streifen"
lg

komisch, mit
http://www.vdr-wiki.de/wiki/in…hannels.conf_DVBT-AT-Wien
bekomme ich wieder mit vdr keine 3sat, mit kaffeine vorher schon? das ging doch schon mal!
wirbelscann findet auch 7 Sender; darunter 3sat, zeigt es aber nicht an?

lg

syslog, beim wirbelscan -v, nach ""vdr gegrept, hoffe ich hab den richitgen Zeitpunkt gepostet

Zitat

Original von wirbel
Dein DVB-T Stick empfängt scheint nicht gut oder nur sporadisch.

mhm, Danke für die Reaktion, ich weiß halt im Moment nicht welche log ich posten soll, das mir kaffeine immer 3sat zeigt und vdr nur fallweise, in der EPG vorschau, aber die Daten (manchmal?) da sind,
und ich hatte schon mal glasklare 3sat, und nein ich mische meine pakte nicht mit etobi

jetzt grad gar nix: kein 3sat-Empfang und kein EPG von 3sat

lg