Hi!
ich habe die Mahlzeit3.2 am laufen. Heute habe ich meine Skystar2 Karte bekommen und gleich eingebaut. Nur leider wird sie nicht erkannt.
modprobe b2c2-flexcop-pci liefert keine Antwort.
VDRadmin Startseite liefert mir: Can't connect to VDR at localhost:2001
Was mache ich falsch?
Hätte ich die Karte vielleicht vor der Installation einbauen sollen?
dmesg liefert:
ion of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
ACPI: PCI interrupt for device 0000:00:14.0 disabled
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
DVB: registering new adapter (FlexCop Digital TV device).
b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
b2c2-flexcop: found the stv0299 at i2c address: 0x68
DVB: registering frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
ACPI: PCI interrupt for device 0000:00:14.0 disabled
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
DVB: registering new adapter (FlexCop Digital TV device).
b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
b2c2-flexcop: found the stv0299 at i2c address: 0x68
DVB: registering frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
ACPI: PCI interrupt for device 0000:00:14.0 disabled
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
DVB: registering new adapter (FlexCop Digital TV device).
b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
b2c2-flexcop: found the stv0299 at i2c address: 0x68
DVB: registering frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
ACPI: PCI interrupt for device 0000:00:14.0 disabled
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
DVB: registering new adapter (FlexCop Digital TV device).
b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
b2c2-flexcop: found the stv0299 at i2c address: 0x68
DVB: registering frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
ACPI: PCI interrupt for device 0000:00:14.0 disabled
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
DVB: registering new adapter (FlexCop Digital TV device).
b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
b2c2-flexcop: found the stv0299 at i2c address: 0x68
DVB: registering frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
ACPI: PCI interrupt for device 0000:00:14.0 disabled
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
DVB: registering new adapter (FlexCop Digital TV device).
b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
b2c2-flexcop: found the stv0299 at i2c address: 0x68
DVB: registering frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
ACPI: PCI interrupt for device 0000:00:14.0 disabled
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.