Zweitkarte DVB-T läuft nicht

Hallo,

habe ca ein 3/4 Jahr ein VDR-System mit einer DVB-C mit MPEG-Chip, läuft auch wunderbar.
Jetzt habe ich mir gedacht, nachdem ich auf der Cebit auch nachgefragt habe, dass es an der Zeit ist mit DVB-T hier in Bremen so langsam anzufangen.
Habe mir dann auch beim DVBSHOP.TV ein Budget TT DVB-T Karte zugelegt und zusätzlich zur DVB-C eingebaut.

Habe dann hier im Board von tzap gelesen und es naturlich auch ausprobiert.
Aber tzap sagt das er keine Adapter an Position 0 finden kann.
Stimmt irgendwie ja auch, denn da sitzt ja die andere DVB-C -Karte.

Hat jemand eine Idee wie ich beide Karte ans Rennen bekomme???

ciao Dirk

Habe mal einen Teil der messages und die Ausgabe von dmesg gezogen:

messages:
----------------------
May 17 18:38:47 linux vdr[8532]: caught signal 2
May 17 18:38:47 linux vdr[9083]: transfer thread ended (pid=9083)
May 17 18:38:47 linux vdr[8532]: buffer stats: 491620 (46%) used
May 17 18:38:47 linux vdr[8542]: KBD remote control thread ended (pid=8542)
May 17 18:38:47 linux vdr[8532]: saved setup to /video/setup.conf
May 17 18:38:47 linux vdr[8532]: =====================
May 17 18:38:47 linux vdr[8532]: EPG bugfix statistics
May 17 18:38:47 linux vdr[8532]: =====================
May 17 18:38:47 linux vdr[8532]: IF SOMEBODY WHO IS IN CHARGE OF THE EPG DATA FOR ONE OF THE LISTED
May 17 18:38:47 linux vdr[8532]: CHANNELS READS THIS: PLEASE TAKE A LOOK AT THE FUNCTION cEventInfo::FixEpgBugs()
May 17 18:38:47 linux vdr[8532]: IN VDR/eit.c TO LEARN WHAT'S WRONG WITH YOUR DATA, AND FIX IT!
May 17 18:38:47 linux vdr[8532]: =====================
May 17 18:38:47 linux vdr[8532]: Fix Hits Channels
May 17 18:38:47 linux vdr[8532]: 0 15432 Das Erste, BR-alpha, arte, SÜDWEST BW, hessen fernsehen, SR Fernsehen Suedwest, 3sat, SÜDWEST RP, RBB Berlin, WDR FERNSEHEN, RBB Brandenburg, ZDF
May 17 18:38:47 linux vdr[8532]: 2 358 Das Erste, BR-alpha, SÜDWEST BW, hessen fernsehen, SR Fernsehen Suedwest, 3sat, SÜDWEST RP, RBB Berlin, WDR FERNSEHEN, RBB Brandenburg
May 17 18:38:47 linux vdr[8532]: 3 28 hessen fernsehen, KiKa
May 17 18:38:47 linux vdr[8532]: 4 3722 3sat
May 17 18:38:47 linux vdr[8532]: 5 2899 hr-klassik, WDR 3
May 17 18:38:47 linux vdr[8532]: 6 20013 BR-alpha, 3sat, Phoenix, WDR FERNSEHEN, Das Erste, NDR FS NDS, hessen fernsehen, arte, Bayerisches FS, SÜDWEST BW, KiKa, SR Fernsehen Suedwest, EinsFestival, ARD-Online-Kanal, RBB Berlin, MDR FERNSEHEN, RBB Brandenburg
May 17 18:38:47 linux vdr[8532]: =====================
May 17 18:38:47 linux vdr[8535]: EIT processing thread ended (pid=8535) - master
May 17 18:38:47 linux vdr[8536]: tuner thread ended on device 1 (pid=8536)
May 17 18:38:47 linux vdr[9084]: receiver thread ended on device 1 (pid=9084)
May 17 18:38:47 linux vdr[8538]: EIT processing thread ended (pid=8538)
May 17 18:38:47 linux vdr[8539]: tuner thread ended on device 2 (pid=8539)
May 17 18:38:47 linux vdr[8532]: stopping plugin: games
May 17 18:38:47 linux vdr[8532]: stopping plugin: osdteletext
May 17 18:38:47 linux vdr[8532]: stopping plugin: mp3
May 17 18:38:47 linux vdr[8532]: stopping plugin: vcd
May 17 18:38:47 linux vdr[8532]: stopping plugin: dvd
May 17 18:38:47 linux vdr[8532]: stopping plugin: console
May 17 18:38:47 linux vdr[8540]: console: output handler thread stopped
May 17 18:38:47 linux vdr[8532]: console: engine destructed
May 17 18:38:47 linux vdr[8532]: stopping plugin: timeline
May 17 18:38:47 linux vdr[8532]: max. latency time 7 seconds
May 17 18:38:47 linux vdr[8532]: exiting
May 17 18:38:47 linux su: pam_unix2: session finished for user root, service su
May 17 18:38:52 linux kernel: hdc: CHECK for good STATUS
May 17 18:38:53 linux su: (to root) root on /dev/tty1
May 17 18:38:53 linux su: pam_unix2: session started for user root, service su
May 17 18:38:54 linux vdr[9512]: VDR version 1.2.6 started
May 17 18:38:54 linux vdr[9512]: loading plugin: ./PLUGINS/lib/libvdr-timeline.so.1.2.6
May 17 18:38:54 linux vdr[9512]: loading plugin: ./PLUGINS/lib/libvdr-console.so.1.2.6
May 17 18:38:54 linux vdr[9512]: loading plugin: ./PLUGINS/lib/libvdr-dvd.so.1.2.6
May 17 18:38:54 linux vdr[9512]: loading plugin: ./PLUGINS/lib/libvdr-vcd.so.1.2.6
May 17 18:38:54 linux vdr[9512]: loading plugin: ./PLUGINS/lib/libvdr-mp3.so.1.2.6
May 17 18:38:54 linux vdr[9512]: loading plugin: ./PLUGINS/lib/libvdr-osdteletext.so.1.2.6
May 17 18:38:54 linux vdr[9512]: loading plugin: ./PLUGINS/lib/libvdr-games.so.1.2.6
May 17 18:38:54 linux vdr[9512]: loading /video/setup.conf
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: ClrDateTime = 1
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: defaultCA = 0
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: HardwareSignalInfo = 0
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: LiveMultichannelAudio = 0
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: PlayMultichannelAudio = 0
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: ShowDate = 1
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: ShowLenght = 0
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: ShowTime = 1
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: SignalInfoGreen = 60
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: SignalInfoRed = 30
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: updateServices = 1
May 17 18:38:54 linux vdr[9512]: ERROR: unknown config parameter: WhereShowSignalInf = 1
May 17 18:38:54 linux vdr[9512]: loading /video/sources.conf
May 17 18:38:54 linux vdr[9512]: loading /video/diseqc.conf
May 17 18:38:54 linux vdr[9512]: loading /video/channels.conf
May 17 18:38:54 linux vdr[9512]: loading /video/timers.conf
May 17 18:38:54 linux vdr[9512]: loading /video/commands.conf
May 17 18:38:54 linux vdr[9512]: loading /video/reccmds.conf
May 17 18:38:54 linux vdr[9512]: loading /video/svdrphosts.conf
May 17 18:38:54 linux vdr[9512]: loading /video/ca.conf
May 17 18:38:54 linux vdr[9512]: loading /video/remote.conf
May 17 18:38:54 linux vdr[9512]: loading /video/keymacros.conf
May 17 18:38:54 linux vdr[9512]: probing /dev/dvb/adapter0/frontend0
May 17 18:38:54 linux vdr[9512]: video device offset is 0
May 17 18:38:54 linux vdr[9515]: EIT processing thread started (pid=9515) - master
May 17 18:38:54 linux vdr[9516]: tuner thread started on device 1 (pid=9516)
May 17 18:38:54 linux vdr[9512]: probing /dev/dvb/adapter1/frontend0
May 17 18:38:54 linux kernel: tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc
May 17 18:38:54 linux vdr[9518]: EIT processing thread started (pid=9518)
May 17 18:38:54 linux vdr[9519]: tuner thread started on device 2 (pid=9519)
May 17 18:38:54 linux vdr[9512]: probing /dev/dvb/adapter2/frontend0
May 17 18:38:54 linux vdr[9512]: found 2 video devices
May 17 18:38:54 linux vdr[9512]: initializing plugin: timeline (0.2.4): Show timer overview and collisions
May 17 18:38:54 linux vdr[9512]: initializing plugin: console (0.5.1): Expands VDR to a Console on TV
May 17 18:38:54 linux vdr[9512]: initializing plugin: dvd (0.3.4-rc10): turn VDR into an (almost) full featured DVD player
May 17 18:38:54 linux vdr[9512]: initializing plugin: vcd (0.0.6b): VideoCD Player
May 17 18:38:54 linux vdr[9512]: initializing plugin: mp3 (0.8.2): A versatile audio player
May 17 18:38:54 linux vdr[9512]: loading /video/plugins/mp3sources.conf
May 17 18:38:54 linux vdr[9512]: loading id3 cache from /video/id3info.cache
May 17 18:38:54 linux vdr[9512]: initializing plugin: osdteletext (0.3.1): Displays teletext on the OSD
May 17 18:38:54 linux vdr[9512]: initializing plugin: games (0.4.2): OSD Games Collection
May 17 18:38:54 linux vdr[9512]: setting primary device to 1
May 17 18:38:54 linux vdr[9512]: SVDRP listening on port 2001
May 17 18:38:54 linux vdr[9512]: starting plugin: timeline
May 17 18:38:54 linux vdr[9512]: starting plugin: console
May 17 18:38:54 linux vdr[9520]: console: output handler thread startet (pid=9520)
May 17 18:38:54 linux vdr[9512]: starting plugin: dvd
May 17 18:38:54 linux vdr[9512]: starting plugin: vcd
May 17 18:38:54 linux vdr[9512]: starting plugin: mp3
May 17 18:38:54 linux vdr[9512]: starting plugin: osdteletext
May 17 18:38:54 linux vdr[9512]: starting plugin: games
May 17 18:38:54 linux vdr[9521]: LIRC remote control thread started (pid=9521)
May 17 18:38:55 linux vdr[9522]: KBD remote control thread started (pid=9522)
May 17 18:38:55 linux vdr[9512]: remote control LIRC - keys known
May 17 18:38:55 linux vdr[9512]: remote control KBD - keys known
May 17 18:38:55 linux vdr[9512]: switching to channel 2
May 17 18:38:55 linux vdr[9523]: receiver thread started on device 1 (pid=9523)
May 17 18:38:55 linux vdr[9512]: reading EPG data from /video/epg.data
May 17 18:38:55 linux vdr[9512]: setting watchdog timer to 60 seconds
May 17 18:38:55 linux vdr[9512]: logo /video/icons/ZDF.logo loaded.
May 17 18:39:01 linux vdr[9512]: max. latency time 1 seconds
May 17 18:39:18 linux vdr[9512]: caught signal 2
May 17 18:39:18 linux vdr[9522]: KBD remote control thread ended (pid=9522)
May 17 18:39:18 linux vdr[9512]: saved setup to /video/setup.conf
May 17 18:39:18 linux vdr[9512]: =====================
May 17 18:39:18 linux vdr[9512]: EPG bugfix statistics
May 17 18:39:18 linux vdr[9512]: =====================
May 17 18:39:18 linux vdr[9512]: IF SOMEBODY WHO IS IN CHARGE OF THE EPG DATA FOR ONE OF THE LISTED
May 17 18:39:18 linux vdr[9512]: CHANNELS READS THIS: PLEASE TAKE A LOOK AT THE FUNCTION cEventInfo::FixEpgBugs()
May 17 18:39:18 linux vdr[9512]: IN VDR/eit.c TO LEARN WHAT'S WRONG WITH YOUR DATA, AND FIX IT!
May 17 18:39:18 linux vdr[9512]: =====================
May 17 18:39:18 linux vdr[9512]: Fix Hits Channels
May 17 18:39:18 linux vdr[9512]: 0 12 ZDF
May 17 18:39:18 linux vdr[9512]: 4 2 3sat
May 17 18:39:18 linux vdr[9512]: 6 13 3sat, KiKa
May 17 18:39:18 linux vdr[9512]: =====================
May 17 18:39:18 linux vdr[9515]: EIT processing thread ended (pid=9515) - master
May 17 18:39:18 linux vdr[9516]: tuner thread ended on device 1 (pid=9516)
May 17 18:39:18 linux vdr[9523]: receiver thread ended on device 1 (pid=9523)
May 17 18:39:18 linux vdr[9518]: EIT processing thread ended (pid=9518)
May 17 18:39:18 linux vdr[9519]: tuner thread ended on device 2 (pid=9519)
May 17 18:39:18 linux vdr[9512]: stopping plugin: games
May 17 18:39:18 linux vdr[9512]: stopping plugin: osdteletext
May 17 18:39:18 linux vdr[9512]: stopping plugin: mp3
May 17 18:39:18 linux vdr[9512]: stopping plugin: vcd
May 17 18:39:18 linux vdr[9512]: stopping plugin: dvd
May 17 18:39:18 linux vdr[9512]: stopping plugin: console
May 17 18:39:18 linux vdr[9520]: console: output handler thread stopped
May 17 18:39:18 linux vdr[9512]: console: engine destructed
May 17 18:39:18 linux vdr[9512]: stopping plugin: timeline
May 17 18:39:18 linux vdr[9512]: max. latency time 1 seconds
May 17 18:39:18 linux vdr[9512]: exiting
May 17 18:39:18 linux su: pam_unix2: session finished for user root, service su
May 17 18:39:21 linux kernel: hdc: CHECK for good STATUS
May 17 18:39:21 linux su: (to root) root on /dev/tty1
May 17 18:39:21 linux su: pam_unix2: session started for user root, service su
May 17 18:39:21 linux vdr[9583]: VDR version 1.2.6 started
May 17 18:39:21 linux vdr[9583]: loading plugin: ./PLUGINS/lib/libvdr-timeline.so.1.2.6
May 17 18:39:21 linux vdr[9583]: loading plugin: ./PLUGINS/lib/libvdr-console.so.1.2.6
May 17 18:39:21 linux vdr[9583]: loading plugin: ./PLUGINS/lib/libvdr-dvd.so.1.2.6
May 17 18:39:21 linux vdr[9583]: loading plugin: ./PLUGINS/lib/libvdr-vcd.so.1.2.6
May 17 18:39:21 linux vdr[9583]: loading plugin: ./PLUGINS/lib/libvdr-mp3.so.1.2.6
May 17 18:39:21 linux vdr[9583]: loading plugin: ./PLUGINS/lib/libvdr-osdteletext.so.1.2.6
May 17 18:39:21 linux vdr[9583]: loading plugin: ./PLUGINS/lib/libvdr-games.so.1.2.6
May 17 18:39:21 linux vdr[9583]: loading /video/setup.conf
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: ClrDateTime = 1
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: defaultCA = 0
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: HardwareSignalInfo = 0
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: LiveMultichannelAudio = 0
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: PlayMultichannelAudio = 0
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: ShowDate = 1
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: ShowLenght = 0
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: ShowTime = 1
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: SignalInfoGreen = 60
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: SignalInfoRed = 30
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: updateServices = 1
May 17 18:39:21 linux vdr[9583]: ERROR: unknown config parameter: WhereShowSignalInf = 1
May 17 18:39:21 linux vdr[9583]: loading /video/sources.conf
May 17 18:39:21 linux vdr[9583]: loading /video/diseqc.conf
May 17 18:39:21 linux vdr[9583]: loading /video/channels.conf
May 17 18:39:21 linux vdr[9583]: loading /video/timers.conf
May 17 18:39:21 linux vdr[9583]: loading /video/commands.conf
May 17 18:39:21 linux vdr[9583]: loading /video/reccmds.conf
May 17 18:39:21 linux vdr[9583]: loading /video/svdrphosts.conf
May 17 18:39:21 linux vdr[9583]: loading /video/ca.conf
May 17 18:39:21 linux vdr[9583]: loading /video/remote.conf
May 17 18:39:21 linux vdr[9583]: loading /video/keymacros.conf
May 17 18:39:21 linux vdr[9583]: probing /dev/dvb/adapter0/frontend0
May 17 18:39:21 linux vdr[9583]: video device offset is 0
May 17 18:39:22 linux vdr[9586]: EIT processing thread started (pid=9586) - master
May 17 18:39:22 linux vdr[9587]: tuner thread started on device 1 (pid=9587)
May 17 18:39:22 linux vdr[9583]: probing /dev/dvb/adapter1/frontend0
May 17 18:39:22 linux kernel: tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc
May 17 18:39:22 linux vdr[9589]: EIT processing thread started (pid=9589)
May 17 18:39:22 linux vdr[9590]: tuner thread started on device 2 (pid=9590)
May 17 18:39:22 linux vdr[9583]: probing /dev/dvb/adapter2/frontend0
May 17 18:39:22 linux vdr[9583]: found 2 video devices
May 17 18:39:22 linux vdr[9583]: initializing plugin: timeline (0.2.4): Show timer overview and collisions
May 17 18:39:22 linux vdr[9583]: initializing plugin: console (0.5.1): Expands VDR to a Console on TV
May 17 18:39:22 linux vdr[9583]: initializing plugin: dvd (0.3.4-rc10): turn VDR into an (almost) full featured DVD player
May 17 18:39:22 linux vdr[9583]: initializing plugin: vcd (0.0.6b): VideoCD Player
May 17 18:39:22 linux vdr[9583]: initializing plugin: mp3 (0.8.2): A versatile audio player
May 17 18:39:22 linux vdr[9583]: loading /video/plugins/mp3sources.conf
May 17 18:39:22 linux vdr[9583]: loading id3 cache from /video/id3info.cache
May 17 18:39:22 linux vdr[9583]: initializing plugin: osdteletext (0.3.1): Displays teletext on the OSD
May 17 18:39:22 linux vdr[9583]: initializing plugin: games (0.4.2): OSD Games Collection
May 17 18:39:22 linux vdr[9583]: setting primary device to 1
May 17 18:39:22 linux vdr[9583]: SVDRP listening on port 2001
May 17 18:39:22 linux vdr[9583]: starting plugin: timeline
May 17 18:39:22 linux vdr[9583]: starting plugin: console
May 17 18:39:22 linux vdr[9591]: console: output handler thread startet (pid=9591)
May 17 18:39:22 linux vdr[9583]: starting plugin: dvd
May 17 18:39:22 linux vdr[9583]: starting plugin: vcd
May 17 18:39:22 linux vdr[9583]: starting plugin: mp3
May 17 18:39:22 linux vdr[9583]: starting plugin: osdteletext
May 17 18:39:22 linux vdr[9583]: starting plugin: games
May 17 18:39:22 linux vdr[9592]: LIRC remote control thread started (pid=9592)
May 17 18:39:22 linux vdr[9593]: KBD remote control thread started (pid=9593)
May 17 18:39:22 linux vdr[9583]: remote control LIRC - keys known
May 17 18:39:22 linux vdr[9583]: remote control KBD - keys known
May 17 18:39:22 linux vdr[9583]: switching to channel 2
May 17 18:39:22 linux vdr[9594]: receiver thread started on device 1 (pid=9594)
May 17 18:39:22 linux vdr[9583]: reading EPG data from /video/epg.data
May 17 18:39:22 linux vdr[9583]: setting watchdog timer to 60 seconds
May 17 18:39:22 linux vdr[9583]: logo /video/icons/ZDF.logo loaded.
May 17 18:39:29 linux vdr[9583]: max. latency time 1 seconds
May 17 18:46:45 linux kernel: e100: eth0 NIC Link is Down
May 17 18:46:49 linux kernel: e100: eth0 NIC Link is Up 100 Mbps Full duplex

dmesg:
------------------------
Linux version 2.4.20-4GB (root@Pentium.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Mon Mar 17 17:54:44 UTC 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ed0000 (usable)
BIOS-e820: 0000000017ed0000 - 0000000017ef0000 (ACPI NVS)
BIOS-e820: 0000000017ef0000 - 0000000017f00000 (usable)
BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
0MB HIGHMEM available.
383MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 98048
zone(0): 4096 pages.
zone(1): 93952 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
Building zonelist for node : 0
Kernel command line: root=/dev/hda1 vga=0x314 splash=silent splash=silent
bootsplash: silent mode.
bootsplash: silent mode.
Initializing CPU#0
Detected 797.435 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1592.52 BogoMIPS
Memory: 383724k/392192k available (1569k kernel code, 7952k reserved, 574k data, 160k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030228
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xe8316, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801AA PCI Bridge
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
mxt_scan_bios: enter
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 24512
aio_setup: sizeof(struct page) = 48
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH: IDE controller at PCI slot 00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 2B020H1, ATA DISK drive
hdb: SAMSUNG SP1614N, ATA DISK drive
blk: queue c03ac0c0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03ac214, I/O limit 4095Mb (mask 0xffffffff)
hdc: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=2646/240/63, UDMA(66)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(66)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2
hdb: hdb1
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 460k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,1)) for (ide0(3,1))
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 160k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded
Adding Swap: 340192k swap-space (priority 42)
cdfs 0.5c loaded.
ide-floppy driver 0.99.newide
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: open failed.
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,65)) for (ide0(3,65))
Using r5 hash to sort names
Intel(R) PRO/100 Network Driver - version 2.1.29-k3
Copyright (c) 2002 Intel Corporation

PCI: Found IRQ 10 for device 02:0a.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 S Desktop Adapter
Hardware receive checksums enabled
cpu cycle saver enabled

raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 18:24:43 Mar 17 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0x2440, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
mice: PS/2 mouse device common for all mice
PCI: Found IRQ 9 for device 00:1f.5
PCI: Sharing IRQ 9 with 02:09.0
PCI: Setting latency timer of device 00:1f.5 to 64
intel8x0: clocking to 41136
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
eth0: no IPv6 routers present
hdc: CHECK for good STATUS
Linux video capture interface: v1.00
DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
PCI: Found IRQ 5 for device 02:08.0
PCI: Sharing IRQ 5 with 00:02.0
DVB: VES1820(0): setup for tuner sp5659c
DVB: VES1820(0): pwm=0x40
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
mt312_read: ret == -121
DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI).
PCI: Found IRQ 9 for device 02:09.0
PCI: Sharing IRQ 9 with 00:1f.5
tda1004x: Detected Philips TDA10045H.
tda1004x: Detected Philips TDM1316L tuner.
DVB: registering frontend 1:0 (Philips TDA10045H)...
mt312_read: ret == -121
DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
DVB: AV7111(0) - firmware supports CI link layer interface
av7110(0): adac type set to 0
Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:02:da:e2
TT-Budget/WinTV-NOVA-T PCI adapter 1 has MAC addr = 00:d0:5c:22:2f:37

Technisat SkyStar2 driver loading
tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc
lirc_serial: auto-detected active low receiver
hdc: CHECK for good STATUS
tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
Linux video capture interface: v1.00
DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
PCI: Found IRQ 5 for device 02:08.0
PCI: Sharing IRQ 5 with 00:02.0
DVB: VES1820(0): setup for tuner sp5659c
DVB: VES1820(0): pwm=0x40
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
mt312_read: ret == -121
DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI).
PCI: Found IRQ 9 for device 02:09.0
PCI: Sharing IRQ 9 with 00:1f.5
tda1004x: Detected Philips TDA10045H.
tda1004x: Detected Philips TDM1316L tuner.
DVB: registering frontend 1:0 (Philips TDA10045H)...
mt312_read: ret == -121
DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
DVB: AV7111(0) - firmware supports CI link layer interface
av7110(0): adac type set to 0
Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:02:da:e2
TT-Budget/WinTV-NOVA-T PCI adapter 1 has MAC addr = 00:d0:5c:22:2f:37

Technisat SkyStar2 driver loading
tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
Linux video capture interface: v1.00
DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
PCI: Found IRQ 5 for device 02:08.0
PCI: Sharing IRQ 5 with 00:02.0
DVB: VES1820(0): setup for tuner sp5659c
DVB: VES1820(0): pwm=0x40
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
mt312_read: ret == -121
DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI).
PCI: Found IRQ 9 for device 02:09.0
PCI: Sharing IRQ 9 with 00:1f.5
tda1004x: Detected Philips TDA10045H.
tda1004x: Detected Philips TDM1316L tuner.
DVB: registering frontend 1:0 (Philips TDA10045H)...
mt312_read: ret == -121
DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
DVB: AV7111(0) - firmware supports CI link layer interface
av7110(0): adac type set to 0
Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:02:da:e2
TT-Budget/WinTV-NOVA-T PCI adapter 1 has MAC addr = 00:d0:5c:22:2f:37

Technisat SkyStar2 driver loading
tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
Linux video capture interface: v1.00
DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
PCI: Found IRQ 5 for device 02:08.0
PCI: Sharing IRQ 5 with 00:02.0
DVB: VES1820(0): setup for tuner sp5659c
DVB: VES1820(0): pwm=0x40
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
mt312_read: ret == -121
DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI).
PCI: Found IRQ 9 for device 02:09.0
PCI: Sharing IRQ 9 with 00:1f.5
tda1004x: Detected Philips TDA10045H.
tda1004x: Detected Philips TDM1316L tuner.
DVB: registering frontend 1:0 (Philips TDA10045H)...
mt312_read: ret == -121
DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
DVB: AV7111(0) - firmware supports CI link layer interface
av7110(0): adac type set to 0
Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:02:da:e2
TT-Budget/WinTV-NOVA-T PCI adapter 1 has MAC addr = 00:d0:5c:22:2f:37

Technisat SkyStar2 driver loading
tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
hdc: CHECK for good STATUS
tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc
hdc: CHECK for good STATUS
tda1004x_init: Unable to open firmware /etc/dvb/tda1004x.mc

Hoffe das hilft weiter.

Thanks Dirk

Und hier noch die Ausgabe von lsmod:

Module Size Used by Not tainted
dvb-ttpci 302612 4
evdev 4032 0 (unused)
mt312 5100 0
tda1004x 8712 1
ves1820 4192 1
stv0299 6644 0 (unused)
grundig_29504-491 3140 0
grundig_29504-401 3532 0
alps_tdlb7 5112 0
alps_tdmb7 3464 0
alps_bsrv2 3484 0
dvb-core 38200 26 [dvb-ttpci mt312 tda1004x ves1820 stv0299 grundig_29504-491 grundig_29504-401 alps_tdlb7 alps_tdmb7 alps_bsrv2]
videodev 5600 1 [dvb-ttpci]
lirc_serial 7520 1 (autoclean)
isa-pnp 29672 0 (unused)
ipv6 134388 -1 (autoclean)
snd-intel8x0 19204 0
snd-pcm 62912 0 [snd-intel8x0]
snd-timer 11904 0 [snd-pcm]
snd-ac97-codec 31152 0 [snd-intel8x0]
snd-mpu401-uart 3360 0 [snd-intel8x0]
snd-rawmidi 13824 0 [snd-mpu401-uart]
snd-seq-device 4000 0 [snd-rawmidi]
snd 35940 0 [snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 3396 0 [snd]
mousedev 4148 0 (unused)
joydev 5632 0 (unused)
input 3104 0 [dvb-ttpci evdev mousedev joydev]
usb-uhci 22096 0 (unused)
usbcore 57836 1 [usb-uhci]
raw1394 14516 0 (unused)
ieee1394 32880 0 [raw1394]
e100 49992 1
ide-cd 29404 0 (autoclean)
cdrom 28192 0 (autoclean) [ide-cd]
cdfs 13932 0 (autoclean)
lvm-mod 65412 0 (autoclean)
reiserfs 200532 2

Hab ich jetzt gemacht.
Hat jetzt auch die Firmwae gefunden und auch geladen.

Aber bei dem Befehl ./tzap k23 sagt mir das System immer noch, dass das Device busy ist?

Thanks Dirk

Klar, verstehe warum das Device busy ist.. :-((((

Hallo nochmal,

habe aber immer noch ein Problem und auch noch ein bißchen hier im Portal herumgeschaut.

Also habe ich ein Verzeichnis in /root/.tzap angelegt und ein Channels.conf eingestellt mit folgendem Inhalt:

K23:490000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:545:546

Danach mit ./tzap k23 den Kanal eingestellt, dabei kam auch eine Ausgabe die durch aus postiv aus sah.
Dann CTRl+C
und dann ./scan -a 1 -c -o vdr oder ./scan -a 1 -e 2 -c -o vdr versucht Programme ausfindig zumachen.
Keine Chance kam immer nur
Warning:filter timeout pid 0x0011
Warning:filter timeout pid 0x0000
Warning:filter timeout pid 0x0010
dumping lists (0 services)
Done.

Das wars.....

Dann hab ich hier im Portal Einträge für eine Channels.conf gefunden:

also sofort die drei Einträge:

Das Erste:490000:I0C12D0M16B8T8G32Y0:T:27500:512+128:
650=deu:576:0:28156:8468:40960:0:ard.de
NDR:490000:I0C12D0M16B8T8G32Y0:T:27500:514+130:652=deu:578:0:28162:8468:40960:0:ndr.de
ZDF:490000:I0C12D0M16B8T8G32Y0:T:27500:513+129:651=deu:577:0:28160:8468:40960:0:zdf.de

in meine Channels.conf in /video kopiert und dann ./runvdr gestartet.

Aber wenn ich auf diese Kanäle schalte kommt ein dunkler Bildschirm und kein Ton.
Sehe aber in /var/log/messages das der VDR korrekt auf das DVB-T Device umschaltet und auch wieder zurück, ansonsten keine Fehlermeldung...

Cu Dirk

Na ja,

sieht mit ./tzap k23 eigentlich richtig gut aus, liefert im Gegensatz zu dem anderen Auszug hier im Portal, immer andere Werte.

Habe auch nur ein Stecker mit einem 1,5 m langen Kabel an dem Eingang der DVB-T Karte angesclossen.

Werde mal bis Montag dem 24 ten warten, da soll ja die Sendeleistung erhöht werden, und schauen was sich dann tut.

Vielleicht hat ja dann auch schon jemand eine angepasste Channls.conf mit den privaten Sendern, hier im Portal.

Obwohl es schon komisch ist, dass ein Elektro-Händler, 50 m von mir, schon seit 2 Wochen DVB-T Fernsehen in seinem Schaufenster in der Schwachhauser Heerstr. zeigt, wenn auch teilweise mit Fehlern im Bild.

Und ein anderer User in der Neustadt auch nur einen Stecker mit einem gleichlangen Kabel, die DVB-T Test-Sender empfangen kann......

Schaun wir mal was der Montag bringt....

Erstmal trotzdem vielen Dank an Alle die geantwortet haben und mich ein Stück dem digitalen Fernsehen näher gebracht haben.

Sollte es funktionieren werde ich auf alle Fälle, das hier im Portal auch kundtun, sofort den Kabelanschluss kündigen, und bringt immer hin 14,13 € mehr dann im Geldsäckel pro Monat.

cu Dirk

PS. Was bedeutet und wo der Parameter -5???

Danke,
ist wohl wirklich nicht das Richtige so ein Stück Kabel.

Deswegen habe ich heute eine Zimmerantenne mit Verstärker angeschlossen und siehe da, tzap liefert immer noch das gleich Ergebnis, aber ein scan liefert das:

Das Erste RB:0:h:S0.0W:0:261:262:267:0:160:0:0:0
NDR RB:0:h:S0.0W:0:518:519:523:0:161:0:0:0
arte:0:h:S0.0W:0:201:202,203:204:0:2:0:0:0
Phoenix:0:h:S0.0W:0:301:302:304:0:3:0:0:0

Wie muss ich jetzt diese Einträge für die DVB-T Karte so anpassen, dass diese auch wirklich dann vom VDR akzpetiert werden und ich die Sender dann auch ansehen kann??

cu Dirk

Hat jemand eine Ahnung?

cu Dirk