VDR Portal
Register Calendar Members List Team Members Search Frequently Asked Questions Gallery Go to the Main Page

VDR Portal » Linux » Betriebssystem » yaVDR » (gelöst) HVR4000 nicht alle Sender » Hello Guest [Login|Register]
Last Post | First Unread Post Print Page | Recommend to a Friend | Add Thread to Favorites
Post New Thread Post Reply
Go to the bottom of this page (gelöst) HVR4000 nicht alle Sender
Author
Post « Previous Thread | Next Thread »
EasyAxel
Jungspund


Registration Date: 07.02.2010
Posts: 21
Fragezeichen (gelöst) HVR4000 nicht alle Sender Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Hallo!
Erst mal danke für diese tolle Distribution.
Leider funktioniert bei mir nicht alles wie ich das gerne möchte.
Habe im meinen yavdr die HVR 4000 und die skystar hd2.
Mit der SkyStar gehen alle Sender. Mit der HVR gehen z.b. Das Erste, ZDF, Pro7 nicht.
Viele andere Sänder funktionieren. Die neue Firmware hab ich auch eingespielt.
Seltsam ist das es mit gleicher Hardware beim EasyVDR funktioniert.
Es scheint als ob der Empfang dieser Sender zu schwach ist.
Hat es ev. mit den Treibern zu tuhen oder mit s2-liplianin?

Zweite Frage wie bekomme ich die Fernbedienung von der HVR ans laufen geht beim Easyvdr ebenfals?

Schon mal danke für die Hilfe!

Axel

__________________
Asus M4N78 PRO 2G, HVR 4000, SkyStar2HD, Atric-IR-Einschalter

This post has been edited 2 time(s), it was last edited by EasyAxel: 07.03.2010 17:18.
07.02.2010 21:56 EasyAxel is offline Send an Email to EasyAxel Search for Posts by EasyAxel Add EasyAxel to your Buddy List
EasyAxel
Jungspund


Registration Date: 07.02.2010
Posts: 21

Thread Starter Thread Started by EasyAxel
RE: HVR4000 nicht alle Sender Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Kann mir den wenigsten jemadn bei der Fernbedienung Helfen mit dem Frontent hat es nicht funktioniert.

gruß
Axel

__________________
Asus M4N78 PRO 2G, HVR 4000, SkyStar2HD, Atric-IR-Einschalter
08.02.2010 21:21 EasyAxel is offline Send an Email to EasyAxel Search for Posts by EasyAxel Add EasyAxel to your Buddy List
roland_s
Jungspund


Registration Date: 19.05.2009
Posts: 39
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
kannst mal mit meine einstellungen probieren:

Habe zwar eine Nova HD S2, aber laut ubuntuforum sind die remotes die gleichen.

Channels kannst du ja aus dem easyvdr mitnehmen oder von hier testen!

lg

__________________
yaVDR 0.1 | VDR 1.7.10
Gigabyte - M61PME-S2 | AMD - Sempron LE-1250
Hauppauge - Nova HD S2 | MSI TV@nywhere Satelite Pro

This post has been edited 2 time(s), it was last edited by roland_s: 08.02.2010 22:28.
08.02.2010 21:30 roland_s is offline Send an Email to roland_s Search for Posts by roland_s Add roland_s to your Buddy List
EasyAxel
Jungspund


Registration Date: 07.02.2010
Posts: 21

Thread Starter Thread Started by EasyAxel
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Super, danke das mit der Fernbedienung hat funktioniert.

Mit den Sender leider nicht. Die Senderliste ist ok. Mit femon werden die Sender auf der SkyStar angezeigt. Auf der HVR4000 kommen auch manchmal Fragmente, als wen die Sendeleistung nicht ausreicht. Das habe ich beim Easyvdr nicht. Dort wird für die HVR4000 die gleiche FW verwendet.

Hat noch jemand eine Idee?

Axel

__________________
Asus M4N78 PRO 2G, HVR 4000, SkyStar2HD, Atric-IR-Einschalter
09.02.2010 01:52 EasyAxel is offline Send an Email to EasyAxel Search for Posts by EasyAxel Add EasyAxel to your Buddy List
roland_s
Jungspund


Registration Date: 19.05.2009
Posts: 39
RE: HVR4000 nicht alle Sender Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
quote:
Original von EasyAxel
Hat es ev. mit den Treibern zu tuhen oder mit s2-liplianin?
l


Hast du s2-liplianin installiert oder nicht?

__________________
yaVDR 0.1 | VDR 1.7.10
Gigabyte - M61PME-S2 | AMD - Sempron LE-1250
Hauppauge - Nova HD S2 | MSI TV@nywhere Satelite Pro
09.02.2010 07:26 roland_s is offline Send an Email to roland_s Search for Posts by roland_s Add roland_s to your Buddy List
EasyAxel
Jungspund


Registration Date: 07.02.2010
Posts: 21

Thread Starter Thread Started by EasyAxel
RE: HVR4000 nicht alle Sender Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Mit, sonst hätte ich doch auch kein HD, oder?
Und auch die updates und upgrates.

gruß axel

__________________
Asus M4N78 PRO 2G, HVR 4000, SkyStar2HD, Atric-IR-Einschalter
09.02.2010 14:47 EasyAxel is offline Send an Email to EasyAxel Search for Posts by EasyAxel Add EasyAxel to your Buddy List
roland_s
Jungspund


Registration Date: 19.05.2009
Posts: 39
RE: HVR4000 nicht alle Sender Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
kanst bitte mal diene logs posten? dmesg, syslog usw. hast ein unicable oder .....

__________________
yaVDR 0.1 | VDR 1.7.10
Gigabyte - M61PME-S2 | AMD - Sempron LE-1250
Hauppauge - Nova HD S2 | MSI TV@nywhere Satelite Pro
09.02.2010 15:07 roland_s is offline Send an Email to roland_s Search for Posts by roland_s Add roland_s to your Buddy List
EasyAxel
Jungspund


Registration Date: 07.02.2010
Posts: 21

Thread Starter Thread Started by EasyAxel
RE: HVR4000 nicht alle Sender Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
quote:
Original von roland_s
kanst bitte mal diene logs posten? dmesg, syslog usw. hast ein unicable oder .....


Nein eine Anlage mit vier Satelliten und pro Karte ein Kabel.
Alle Sender liegen im Highband Horizontal. ein Verstärker bringt keine Besserung.
Nur stärkeres Signal kein Carrier.

DMESG
code: 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:
202:
203:
204:
205:
206:
207:
208:
209:
210:
211:
212:
213:
214:
215:
216:
217:
218:
219:
220:
221:
222:
223:
224:
225:
226:
227:
228:
229:
230:
231:
232:
233:
234:
235:
236:
237:
238:
239:
240:
241:
242:
243:
244:
245:
246:
247:
248:
249:
250:
251:
252:
253:
254:
255:
256:
257:
258:
259:
260:
261:
262:
263:
264:
265:
266:
267:
268:
269:
270:
271:
272:
273:
274:
275:
276:
277:
278:
279:
280:
281:
282:
283:
284:
285:
286:
287:
288:
289:
290:
291:
292:
293:
294:
295:
296:
297:
298:
299:
300:
301:
302:
303:
304:
305:
306:
307:
308:
309:
310:
311:
312:
313:
314:
315:
316:
317:
318:
319:
320:
321:
322:
323:
324:
325:
326:
327:
328:
329:
330:
331:
332:
333:
334:
335:
336:
337:
338:
339:
340:
341:
342:
343:
344:
345:
346:
347:
348:
349:
350:
351:
352:
353:
354:
355:
356:
357:
358:
359:
360:
361:
362:
363:
364:
365:
366:
367:
368:
369:
370:
371:
372:
373:
374:
375:
376:
377:
378:
379:
380:
381:
382:
383:
384:
385:
386:
387:
388:
389:
390:
391:
392:
393:
394:
395:
396:
397:
398:
399:
400:
401:
402:
403:
404:
405:
406:
407:
408:
409:
410:
411:
412:
413:
414:
415:
416:
417:
418:
419:
420:
421:
422:
423:
424:
425:
426:
427:
428:
429:
430:
431:
432:
433:
434:
435:
436:
437:
438:
439:
440:
441:
442:
443:
444:
445:
446:
447:
448:
449:
450:
451:
452:
453:
454:
455:
456:
457:
458:
459:
460:
461:
462:
463:
464:
465:
466:
467:
468:
469:
470:
471:
472:
473:
474:
475:
476:
477:
478:
479:
480:
481:
482:
483:
484:
485:
486:
487:
488:
489:
490:
491:
492:
493:
494:
495:
496:
497:
498:
499:
500:
501:
502:
503:
504:
505:
506:
507:
508:
509:
510:
511:
512:
513:
514:
515:
516:
517:
518:
519:
520:
521:
522:
523:
524:
525:
526:
527:
528:
529:
530:
531:
532:
533:
534:
535:
536:
537:
538:
539:
540:
541:
542:
543:
544:
545:
546:
547:
548:
549:
550:
551:
552:
553:
554:
555:
556:
557:
558:
559:
560:
561:
562:
563:
564:
565:
566:
567:
568:
569:
570:
571:
572:
573:
574:
575:
576:
577:
578:
579:
580:
581:
582:
583:
584:
585:
586:
587:
588:
589:
590:
591:
592:
593:
594:
595:
596:
597:
598:
599:
600:
601:
602:
603:
604:
605:
606:
607:
608:
609:
610:
611:
612:
613:
614:
615:
616:
617:
618:
619:
620:
621:
622:
623:
624:
625:
626:
627:
628:
629:
630:
631:
632:
633:
634:
635:
636:
637:
638:
639:
640:
641:
642:
643:
644:
645:
646:
647:
648:
649:
650:
651:
652:
653:
654:
655:
656:
657:
658:
659:
660:
661:
662:
663:
664:
665:
666:
667:
668:
669:
670:
671:
672:
673:
674:
675:
676:
677:
678:
679:
680:
681:
682:
683:
684:
685:
686:
687:
688:
689:
690:
691:
692:
693:
694:
695:
696:
697:
698:
699:
700:
701:
702:
703:
704:
705:
706:
707:
708:
709:
710:
711:
712:
713:
714:
715:
716:
717:
718:
719:
720:
721:
722:
723:
724:
725:
726:
727:
728:
729:
730:
731:
732:
733:
734:
735:
736:
737:
738:
739:
740:
741:
742:
743:
744:
745:
746:
747:
748:
749:
750:
751:
752:
753:
754:
755:
756:
757:
758:
759:
760:
761:
762:
763:
764:
765:
766:
767:
768:
769:
770:
771:
772:
773:
774:
775:
776:
777:
778:
779:
780:
781:
782:
783:
784:
785:
786:
787:
788:
789:
790:
791:
792:
793:
794:
795:
796:
797:
798:
799:
800:
801:
802:
803:
804:
805:
806:
807:
808:
809:
810:
811:
812:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-19-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 (Ubuntu 2.6.31-19.56-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff90000 (usable)
[ 0.000000] BIOS-e820: 000000005ff90000 - 000000005ffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005ffa8000 - 000000005ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005ffe0000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x5ff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000005ff90000 (usable)
[ 0.000000] modified: 000000005ff90000 - 000000005ffa8000 (ACPI data)
[ 0.000000] modified: 000000005ffa8000 - 000000005ffe0000 (ACPI NVS)
[ 0.000000] modified: 000000005ffe0000 - 0000000060000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 379bc000 - 37fef9f5
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ee09f5
[ 0.000000] Move RAMDISK from 00000000379bc000 - 0000000037fef9f4 to 008ad000 - 00ee09f4
[ 0.000000] ACPI: RSDP 000fbbb0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 5ff90000 00044 (v01 090209 RSDT1127 20090902 MSFT 00000097)
[ 0.000000] ACPI: FACP 5ff90200 00084 (v01 090209 FACP1127 20090902 MSFT 00000097)
[ 0.000000] ACPI: DSDT 5ff90450 0BF1B (v01 A1191 A1191001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 5ffa8000 00040
[ 0.000000] ACPI: APIC 5ff90390 00080 (v01 090209 APIC1127 20090902 MSFT 00000097)
[ 0.000000] ACPI: MCFG 5ff90410 0003C (v01 090209 OEMMCFG 20090902 MSFT 00000097)
[ 0.000000] ACPI: OEMB 5ffa8040 00073 (v01 090209 OEMB1127 20090902 MSFT 00000097)
[ 0.000000] ACPI: HPET 5ff9c370 00038 (v01 090209 OEMHPET0 20090902 MSFT 00000097)
[ 0.000000] ACPI: INFO 5ffa80c0 00124 (v01 090209 AMDINFO 20090902 MSFT 00000097)
[ 0.000000] ACPI: NVHD 5ffa81f0 00284 (v01 090209 NVHDCP 20090902 MSFT 00000097)
[ 0.000000] ACPI: SSDT 5ff9c3b0 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 647MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac22c] BRK ==> [00008a9000 - 00008ac22c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008ad000 - 0000ee09f5] NEW RAMDISK ==> [00008ad000 - 0000ee09f5]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0005ff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005ff90
[ 0.000000] On node 0 totalpages: 392991
[ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1296 pages used for memmap
[ 0.000000] HighMem zone: 164482 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1c07000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389919
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=UUID=09218691-c361-4835-a5be-e60ac2b470f1 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 7861760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005ff90)
[ 0.000000] Memory: 1535784k/1572416k available (4567k kernel code, 35244k reserved, 2141k data, 540k init, 663112k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575c48 - 0xc078d408 (2141 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575c48 (4567 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3100.434 MHz processor.
[ 0.000010] spurious 8259A interrupt: IRQ7.
[ 0.001843] Console: colour VGA+ 80x25
[ 0.001845] console [tty0] enabled
[ 0.001967] hpet clockevent registered
[ 0.001970] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001974] Calibrating delay loop (skipped), value calculated using timer frequency.. 6200.86 BogoMIPS (lpj=12401736)
[ 0.001987] Security Framework initialized
[ 0.001999] AppArmor: AppArmor initialized
[ 0.002004] Mount-cache hash table entries: 512
[ 0.002078] Initializing cgroup subsys ns
[ 0.002080] Initializing cgroup subsys cpuacct
[ 0.002083] Initializing cgroup subsys memory
[ 0.002086] Initializing cgroup subsys freezer
[ 0.002088] Initializing cgroup subsys net_cls
[ 0.002096] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.002098] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.002099] CPU: Physical Processor ID: 0
[ 0.002100] CPU: Processor Core ID: 0
[ 0.002102] mce: CPU supports 6 MCE banks
[ 0.002109] using C1E aware idle routine
[ 0.002113] Performance Counters: AMD PMU driver.
[ 0.002116] ... version: 0
[ 0.002117] ... bit width: 48
[ 0.002118] ... generic counters: 4
[ 0.002120] ... value mask: 0000ffffffffffff
[ 0.002121] ... max period: 00007fffffffffff
[ 0.002122] ... fixed-purpose counters: 0
[ 0.002123] ... counter mask: 000000000000000f
[ 0.002126] Checking 'hlt' instruction... OK.
[ 0.017417] ACPI: Core revision 20090521
[ 0.031315] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071011] CPU0: AMD Phenom(tm) II X2 550 Processor stepping 02
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 6200.13 BogoMIPS (lpj=12400276)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.156894] CPU1: AMD Phenom(tm) II X2 550 Processor stepping 02
[ 0.156907] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160010] Brought up 2 CPUs
[ 0.160012] Total of 2 processors activated (12401.00 BogoMIPS).
[ 0.160092] CPU0 attaching sched-domain:
[ 0.160094] domain 0: span 0-1 level MC
[ 0.160096] groups: 0 1
[ 0.160100] CPU1 attaching sched-domain:
[ 0.160101] domain 0: span 0-1 level MC
[ 0.160103] groups: 1 0
[ 0.160146] Booting paravirtualized kernel on bare hardware
[ 0.160146] regulator: core version 0.5
[ 0.160146] Time: 21:32:24 Date: 02/09/10
[ 0.160146] NET: Registered protocol family 16
[ 0.160166] EISA bus registered
[ 0.160172] ACPI: bus type pci registered
[ 0.160217] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.160219] PCI: Not using MMCONFIG.
[ 0.160872] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.160874] PCI: Using configuration type 1 for base access
[ 0.160875] PCI: Using configuration type 1 for extended access
[ 0.161372] bio: create slab <bio-0> at 0
[ 0.161372] ACPI: EC: Look up EC in DSDT
[ 0.227848] ACPI: Interpreter enabled
[ 0.227852] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.227867] ACPI: Using IOAPIC for interrupt routing
[ 0.227914] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.233414] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.233415] PCI: Using MMCONFIG for extended config space
[ 0.244717] ACPI Warning: Incorrect checksum in table [OEMB] - C5, should be BC 20090521 tbutils-246
[ 0.244905] ACPI: No dock devices found.
[ 0.245238] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.245479] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff]
[ 0.245515] pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f]
[ 0.245524] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f]
[ 0.245528] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f]
[ 0.245546] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.245550] pci 0000:00:01.1: PME# disabled
[ 0.245603] pci 0000:00:01.3: reg 10 32bit mmio: [0xf5f80000-0xf5ffffff]
[ 0.245722] pci 0000:00:02.0: reg 10 32bit mmio: [0xf5f7e000-0xf5f7efff]
[ 0.245743] pci 0000:00:02.0: supports D1 D2
[ 0.245744] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.245746] pci 0000:00:02.0: PME# disabled
[ 0.245766] pci 0000:00:02.1: reg 10 32bit mmio: [0xf5f7fc00-0xf5f7fcff]
[ 0.245791] pci 0000:00:02.1: supports D1 D2
[ 0.245792] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.245795] pci 0000:00:02.1: PME# disabled
[ 0.245818] pci 0000:00:04.0: reg 10 32bit mmio: [0xf5f7d000-0xf5f7dfff]
[ 0.245838] pci 0000:00:04.0: supports D1 D2
[ 0.245840] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.245842] pci 0000:00:04.0: PME# disabled
[ 0.245862] pci 0000:00:04.1: reg 10 32bit mmio: [0xf5f7f800-0xf5f7f8ff]
[ 0.245887] pci 0000:00:04.1: supports D1 D2
[ 0.245888] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.245891] pci 0000:00:04.1: PME# disabled
[ 0.245921] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.245948] pci 0000:00:07.0: reg 10 32bit mmio: [0xf5f78000-0xf5f7bfff]
[ 0.245969] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.245971] pci 0000:00:07.0: PME# disabled
[ 0.246017] pci 0000:00:09.0: reg 10 io port: [0xd480-0xd487]
[ 0.246019] pci 0000:00:09.0: reg 14 io port: [0xd400-0xd403]
[ 0.246022] pci 0000:00:09.0: reg 18 io port: [0xd080-0xd087]
[ 0.246025] pci 0000:00:09.0: reg 1c io port: [0xd000-0xd003]
[ 0.246028] pci 0000:00:09.0: reg 20 io port: [0xcc00-0xcc0f]
[ 0.246031] pci 0000:00:09.0: reg 24 32bit mmio: [0xf5f76000-0xf5f77fff]
[ 0.246064] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf5f7c000-0xf5f7cfff]
[ 0.246067] pci 0000:00:0a.0: reg 14 io port: [0xc880-0xc887]
[ 0.246070] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf5f7f400-0xf5f7f4ff]
[ 0.246073] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf5f7f000-0xf5f7f00f]
[ 0.246091] pci 0000:00:0a.0: supports D1 D2
[ 0.246092] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.246096] pci 0000:00:0a.0: PME# disabled
[ 0.246122] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.246124] pci 0000:00:0b.0: PME# disabled
[ 0.246327] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.246334] pci 0000:00:10.0: PME# disabled
[ 0.246569] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.246576] pci 0000:00:13.0: PME# disabled
[ 0.246809] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.246815] pci 0000:00:14.0: PME# disabled
[ 0.246929] pci 0000:01:06.0: reg 10 32bit mmio: [0xd5fff000-0xd5ffffff]
[ 0.246975] pci 0000:01:07.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[ 0.247028] pci 0000:01:07.1: reg 10 32bit mmio: [0xf7000000-0xf7ffffff]
[ 0.247077] pci 0000:01:07.2: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
[ 0.247127] pci 0000:01:07.4: reg 10 32bit mmio: [0xf9000000-0xf9ffffff]
[ 0.247182] pci 0000:00:08.0: transparent bridge
[ 0.247185] pci 0000:00:08.0: bridge 32bit mmio: [0xf6000000-0xf9ffffff]
[ 0.247188] pci 0000:00:08.0: bridge 32bit mmio pref: [0xd5f00000-0xd5ffffff]
[ 0.247203] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.247207] pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff]
[ 0.247211] pci 0000:02:00.0: reg 1c 64bit mmio: [0xd6000000-0xd7ffffff]
[ 0.247214] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.247217] pci 0000:02:00.0: reg 30 32bit mmio: [0xfafe0000-0xfaffffff]
[ 0.247239] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
[ 0.247241] pci 0000:00:0b.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff]
[ 0.247244] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd6000000-0xdfffffff]
[ 0.247480] pci_bus 0000:00: on NUMA node 0
[ 0.247483] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[ 0.247690] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
[ 0.247797] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.IXVE._PRT]
[ 0.247850] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.MXR0._PRT]
[ 0.247905] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.BR13._PRT]
[ 0.247955] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.BR14._PRT]
[ 0.261273] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.261475] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[ 0.261676] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 0.261872] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.262070] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.262266] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.262462] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.262657] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.262853] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.263049] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.263245] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.263441] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.263636] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[ 0.263832] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.264033] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.264230] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.264428] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11
[ 0.264624] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.264820] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.265021] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.265221] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
[ 0.265417] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.265613] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.265810] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.266006] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.266203] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.266400] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.266596] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.266792] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.266988] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.267185] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.267381] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.267577] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.267774] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.267970] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.268173] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.268373] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.268576] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[ 0.268778] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[ 0.268983] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
[ 0.269182] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *7
[ 0.269381] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.269579] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
[ 0.269779] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.270008] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.270208] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
[ 0.270407] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.270518] SCSI subsystem initialized
[ 0.270536] libata version 3.00 loaded.
[ 0.270536] usbcore: registered new interface driver usbfs
[ 0.270536] usbcore: registered new interface driver hub
[ 0.270536] usbcore: registered new device driver usb
[ 0.270536] ACPI: WMI: Mapper loaded
[ 0.270536] PCI: Using ACPI for IRQ routing
[ 0.280011] Bluetooth: Core ver 2.15
[ 0.280031] NET: Registered protocol family 31
[ 0.280031] Bluetooth: HCI device and connection manager initialized
[ 0.280031] Bluetooth: HCI socket layer initialized
[ 0.280031] NetLabel: Initializing
[ 0.280031] NetLabel: domain hash size = 128
[ 0.280031] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.280031] NetLabel: unlabeled traffic allowed by default
[ 0.280050] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.280053] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.296010] pnp: PnP ACPI init
[ 0.296018] ACPI: bus type pnp registered
[ 0.301962] pnp: PnP ACPI: found 14 devices
[ 0.301963] ACPI: ACPI bus type pnp unregistered
[ 0.301965] PnPBIOS: Disabled by ACPI PNP
[ 0.301972] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.301974] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.301976] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 0.301978] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 0.301980] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 0.301982] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 0.301984] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 0.301985] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 0.301988] system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved
[ 0.301990] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.301994] system 00:09: ioport range 0xc00-0xc0f has been reserved
[ 0.301996] system 00:09: ioport range 0xd00-0xd0f has been reserved
[ 0.301997] system 00:09: ioport range 0xa20-0xa2f has been reserved
[ 0.301999] system 00:09: ioport range 0xa30-0xa3f has been reserved
[ 0.302002] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.302004] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.302008] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.302011] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.302013] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.302015] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.302017] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.302019] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.336606] AppArmor: AppArmor Filesystem Enabled
[ 0.336673] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.336674] pci 0000:00:08.0: IO window: disabled
[ 0.336677] pci 0000:00:08.0: MEM window: 0xf6000000-0xf9ffffff
[ 0.336680] pci 0000:00:08.0: PREFETCH window: 0xd5f00000-0xd5ffffff
[ 0.336682] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.336684] pci 0000:00:0b.0: IO window: 0xe000-0xefff
[ 0.336686] pci 0000:00:0b.0: MEM window: 0xfaf00000-0xfbffffff
[ 0.336689] pci 0000:00:0b.0: PREFETCH window: 0x000000d6000000-0x000000dfffffff
[ 0.336691] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.336693] pci 0000:00:10.0: IO window: disabled
[ 0.336701] pci 0000:00:10.0: MEM window: disabled
[ 0.336707] pci 0000:00:10.0: PREFETCH window: disabled
[ 0.336714] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04
[ 0.336715] pci 0000:00:13.0: IO window: disabled
[ 0.336724] pci 0000:00:13.0: MEM window: disabled
[ 0.336730] pci 0000:00:13.0: PREFETCH window: disabled
[ 0.336736] pci 0000:00:14.0: PCI bridge, secondary bus 0000:05
[ 0.336737] pci 0000:00:14.0: IO window: disabled
[ 0.336746] pci 0000:00:14.0: MEM window: disabled
[ 0.336752] pci 0000:00:14.0: PREFETCH window: disabled
[ 0.336762] pci 0000:00:08.0: setting latency timer to 64
[ 0.336766] pci 0000:00:0b.0: setting latency timer to 64
[ 0.337047] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.337049] alloc irq_desc for 19 on node -1
[ 0.337051] alloc kstat_irqs on node -1
[ 0.337057] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 0.337064] pci 0000:00:10.0: setting latency timer to 64
[ 0.337341] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18
[ 0.337343] alloc irq_desc for 18 on node -1
[ 0.337344] alloc kstat_irqs on node -1
[ 0.337349] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18
[ 0.337356] pci 0000:00:13.0: setting latency timer to 64
[ 0.337631] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17
[ 0.337633] alloc irq_desc for 17 on node -1
[ 0.337634] alloc kstat_irqs on node -1
[ 0.337639] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17
[ 0.337647] pci 0000:00:14.0: setting latency timer to 64
[ 0.337651] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.337653] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.337655] pci_bus 0000:01: resource 1 mem: [0xf6000000-0xf9ffffff]
[ 0.337657] pci_bus 0000:01: resource 2 pref mem [0xd5f00000-0xd5ffffff]
[ 0.337658] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.337660] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.337662] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.337663] pci_bus 0000:02: resource 1 mem: [0xfaf00000-0xfbffffff]
[ 0.337665] pci_bus 0000:02: resource 2 pref mem [0xd6000000-0xdfffffff]
[ 0.337685] NET: Registered protocol family 2
[ 0.337742] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.337926] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.338266] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.338438] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.338440] TCP reno registered
[ 0.338485] NET: Registered protocol family 1
[ 0.338519] Trying to unpack rootfs image as initramfs...
[ 0.448905] Freeing initrd memory: 6350k freed
[ 0.451331] cpufreq-nforce2: No nForce2 chipset.
[ 0.451347] Scanning for low memory corruption every 60 seconds
[ 0.451416] audit: initializing netlink socket (disabled)
[ 0.451427] type=2000 audit(1265751144.447:1): initialized
[ 0.456866] highmem bounce pool size: 64 pages
[ 0.456869] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.457688] VFS: Disk quotas dquot_6.5.2
[ 0.457724] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.458041] fuse init (API version 7.12)
[ 0.458088] msgmni has been set to 1718
[ 0.458232] alg: No test for stdrng (krng)
[ 0.458249] io scheduler noop registered
[ 0.458250] io scheduler anticipatory registered
[ 0.458252] io scheduler deadline registered
[ 0.458280] io scheduler cfq registered (default)
[ 0.520098] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.520198] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.520302] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.520405] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.520574] pci 0000:02:00.0: Boot video device
[ 0.520848] alloc irq_desc for 24 on node -1
[ 0.520850] alloc kstat_irqs on node -1
[ 0.520867] pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X
[ 0.520885] pcieport-driver 0000:00:10.0: setting latency timer to 64
[ 0.521246] alloc irq_desc for 25 on node -1
[ 0.521247] alloc kstat_irqs on node -1
[ 0.521262] pcieport-driver 0000:00:13.0: irq 25 for MSI/MSI-X
[ 0.521280] pcieport-driver 0000:00:13.0: setting latency timer to 64
[ 0.521630] alloc irq_desc for 26 on node -1
[ 0.521631] alloc kstat_irqs on node -1
[ 0.521646] pcieport-driver 0000:00:14.0: irq 26 for MSI/MSI-X
[ 0.521663] pcieport-driver 0000:00:14.0: setting latency timer to 64
[ 0.521809] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.521822] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.521899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.521902] ACPI: Power Button [PWRF]
[ 0.521938] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.521939] ACPI: Power Button [PWRB]
[ 0.522194] processor LNXCPU:00: registered as cooling_device0
[ 0.522212] processor LNXCPU:01: registered as cooling_device1
[ 0.526797] isapnp: Scanning for PnP cards...
[ 0.532902] Switched to high resolution mode on CPU 1
[ 0.535966] Switched to high resolution mode on CPU 0
[ 0.879507] isapnp: No Plug & Play device found
[ 0.880200] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.880287] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.880498] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.881039] brd: module loaded
[ 0.881290] loop: module loaded
[ 0.881328] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.881373] ahci 0000:00:09.0: version 3.0
[ 0.881662] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.881666] alloc irq_desc for 23 on node -1
[ 0.881667] alloc kstat_irqs on node -1
[ 0.881674] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.881692] alloc irq_desc for 27 on node -1
[ 0.881693] alloc kstat_irqs on node -1
[ 0.881697] ahci 0000:00:09.0: irq 27 for MSI/MSI-X
[ 0.881759] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 0.881762] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
[ 0.881764] ahci 0000:00:09.0: setting latency timer to 64
[ 0.882188] scsi0 : ahci
[ 0.882245] scsi1 : ahci
[ 0.882276] scsi2 : ahci
[ 0.882307] scsi3 : ahci
[ 0.882339] scsi4 : ahci
[ 0.882370] scsi5 : ahci
[ 0.882439] ata1: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76100 irq 27
[ 0.882441] ata2: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76180 irq 27
[ 0.882443] ata3: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76200 irq 27
[ 0.882445] ata4: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76280 irq 27
[ 0.882447] ata5: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76300 irq 27
[ 0.882448] ata6: SATA max UDMA/133 abar m8192@0xf5f76000 port 0xf5f76380 irq 27
[ 0.882595] pata_amd 0000:00:06.0: version 0.4.1
[ 0.882620] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.882681] scsi6 : pata_amd
[ 0.882716] scsi7 : pata_amd
[ 0.883458] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.883460] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.883909] Fixed MDIO Bus: probed
[ 0.883930] PPP generic driver version 2.4.2
[ 0.883981] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.884274] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.884276] alloc irq_desc for 22 on node -1
[ 0.884277] alloc kstat_irqs on node -1
[ 0.884283] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.884290] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.884292] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.884319] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.884339] ehci_hcd 0000:00:02.1: debug port 1
[ 0.884342] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.884355] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf5f7fc00
[ 0.896015] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.896062] usb usb1: configuration #1 chosen from 1 choice
[ 0.896081] hub 1-0:1.0: USB hub found
[ 0.896086] hub 1-0:1.0: 6 ports detected
[ 0.896402] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[ 0.896404] alloc irq_desc for 21 on node -1
[ 0.896405] alloc kstat_irqs on node -1
[ 0.896412] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[ 0.896418] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.896420] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.896439] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.896456] ehci_hcd 0000:00:04.1: debug port 1
[ 0.896459] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.896473] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf5f7f800
[ 0.908015] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.908060] usb usb2: configuration #1 chosen from 1 choice
[ 0.908077] hub 2-0:1.0: USB hub found
[ 0.908081] hub 2-0:1.0: 6 ports detected
[ 0.908119] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.908409] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.908411] alloc irq_desc for 20 on node -1
[ 0.908412] alloc kstat_irqs on node -1
[ 0.908419] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.908426] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.908428] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.908450] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.908468] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf5f7e000
[ 0.966037] usb usb3: configuration #1 chosen from 1 choice
[ 0.966052] hub 3-0:1.0: USB hub found
[ 0.966057] hub 3-0:1.0: 6 ports detected
[ 0.966365] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[ 0.966368] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
[ 0.966375] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.966377] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.966394] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.966413] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf5f7d000
[ 1.022042] usb usb4: configuration #1 chosen from 1 choice
[ 1.022057] hub 4-0:1.0: USB hub found
[ 1.022063] hub 4-0:1.0: 6 ports detected
[ 1.022096] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.022139] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.022141] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.022212] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.022251] mice: PS/2 mouse device common for all mice
[ 1.022317] rtc_cmos 00:07: RTC can wake from S4
[ 1.022335] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.022385] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.022442] device-mapper: uevent: version 1.0.3
[ 1.022497] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.022543] device-mapper: multipath: version 1.1.0 loaded
[ 1.022545] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.022612] EISA: Probing bus 0 at eisa.0
[ 1.022618] Cannot allocate resource for EISA slot 2
[ 1.022632] EISA: Detected 0 cards.
[ 1.022686] cpuidle: using governor ladder
[ 1.022688] cpuidle: using governor menu
[ 1.022967] TCP cubic registered
[ 1.023054] NET: Registered protocol family 10
[ 1.023320] lo: Disabled Privacy Extensions
[ 1.023512] NET: Registered protocol family 17
[ 1.023521] Bluetooth: L2CAP ver 2.13
[ 1.023522] Bluetooth: L2CAP socket layer initialized
[ 1.023523] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.023524] Bluetooth: SCO socket layer initialized
[ 1.023551] Bluetooth: RFCOMM TTY layer initialized
[ 1.023553] Bluetooth: RFCOMM socket layer initialized
[ 1.023554] Bluetooth: RFCOMM ver 1.11
[ 1.023562] powernow-k8: Found 1 AMD Phenom(tm) II X2 550 Processor processors (2 cpu cores) (version 2.20.00)
[ 1.023583] powernow-k8: 0 : pstate 0 (3100 MHz)
[ 1.023584] powernow-k8: 1 : pstate 1 (2400 MHz)
[ 1.023585] powernow-k8: 2 : pstate 2 (1900 MHz)
[ 1.023587] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.023652] Using IPI No-Shortcut mode
[ 1.023699] PM: Resume from disk failed.
[ 1.023705] registered taskstats version 1
[ 1.023793] Magic number: 14:356:550
[ 1.023817] pci_link PNP0C0F:01: hash matches
[ 1.023883] rtc_cmos 00:07: setting system clock to 2010-02-09 21:32:25 UTC (1265751145)
[ 1.023885] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.023886] EDD information not available.
[ 1.042069] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.048299] ata7.00: ATAPI: DVD-RW IDE1004, VER 0151, max UDMA/66
[ 1.048314] ata7: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
[ 1.048316] ata7.00: limited to UDMA/33 due to 40-wire cable
[ 1.064257] ata7.00: configured for UDMA/33
[ 1.200020] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.200048] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.204520] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.204538] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.204547] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.364015] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.364795] ata2.00: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133
[ 1.364797] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.365660] ata2.00: configured for UDMA/133
[ 1.365725] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 1.365799] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.365824] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.365846] sd 1:0:0:0: [sda] Write Protect is off
[ 1.365848] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.365859] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.365920] sda:
[ 1.366243] scsi 6:0:0:0: CD-ROM DVDRW IDE1004 0151 PQ: 0 ANSI: 5
[ 1.367565] sr0: scsi3-mmc drive: 47x/47x writer cd/rw xa/form2 cdda tray
[ 1.367568] Uniform CD-ROM driver Revision: 3.20
[ 1.367611] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1.367636] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 1.367670] ata8: port disabled. ignoring.
[ 1.379540] sda1 sda2 <
[ 1.396018] usb 4-1: new low speed USB device using ohci_hcd and address 2
[ 1.402431] sda5 >
[ 1.402573] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.402583] Freeing unused kernel memory: 540k freed
[ 1.402761] Write protecting the kernel text: 4568k
[ 1.402783] Write protecting the kernel read-only data: 1836k
[ 1.522700] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.523034] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 1.523038] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 1.523042] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.568877] FDC 0 is a post-1991 82077
[ 1.638001] usb 4-1: configuration #1 chosen from 1 choice
[ 1.668026] usbcore: registered new interface driver hiddev
[ 1.677060] input: Silitek Silitek RF Keyboard / Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input4
[ 1.677095] generic-usb 0003:047B:050E.0001: input,hidraw0: USB HID v1.00 Keyboard [Silitek Silitek RF Keyboard / Mouse] on usb-0000:00:04.0-1/input0
[ 1.687130] input: Silitek Silitek RF Keyboard / Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.1/input/input5
[ 1.687172] generic-usb 0003:047B:050E.0002: input,hidraw1: USB HID v1.00 Mouse [Silitek Silitek RF Keyboard / Mouse] on usb-0000:00:04.0-1/input1
[ 1.687181] usbcore: registered new interface driver usbhid
[ 1.687182] usbhid: v2.6:USB HID core driver
[ 2.040624] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 90:e6:ba:3f:93:54
[ 2.040627] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 2.133817] PM: Starting manual resume from disk
[ 2.133820] PM: Resume from partition 8:5
[ 2.133821] PM: Checking hibernation image.
[ 2.133925] PM: Resume from disk failed.
[ 2.158404] EXT4-fs (sda1): barriers enabled
[ 2.171311] kjournald2 starting: pid 417, dev sda1:8, commit interval 5 seconds
[ 2.171320] EXT4-fs (sda1): delayed allocation enabled
[ 2.171322] EXT4-fs: file extents enabled
[ 2.218168] EXT4-fs: mballoc enabled
[ 2.218178] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 7.564010] udev: starting version 147
[ 7.588165] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[ 7.588169] ACPI: I/O resource nForce2_smbus [0x2e00-0x2e3f] conflicts with ACPI region SM00 [0x2e00-0x2e3f]
[ 7.588189] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.588191] nForce2_smbus 0000:00:01.1: Error probing SMB2.
[ 7.589280] Adding 4522256k swap on /dev/sda5. Priority:-1 extents:1 across:4522256k
[ 7.692490] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 7.692787] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 7.692791] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 7.692807] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 7.693627] alloc irq_desc for 28 on node -1
[ 7.693630] alloc kstat_irqs on node -1
[ 7.693636] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X
[ 7.694492] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 7.694637] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/device:1a/input/input6
[ 7.694660] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 7.707116] Linux video capture interface: v2.00
[ 7.715695] cx2388x alsa driver version 0.0.7 loaded
[ 7.716032] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 16
[ 7.716035] alloc irq_desc for 16 on node -1
[ 7.716036] alloc kstat_irqs on node -1
[ 7.716045] cx88_audio 0000:01:07.1: PCI INT A -> Link[LNKC] -> GSI 16 (level, low) -> IRQ 16
[ 7.716225] cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
[ 7.716227] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 7.719850] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[ 7.724950] lp: driver loaded but no devices found
[ 7.734262] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
[ 7.798569] EXT4-fs (sda1): internal journal on sda1:8
[ 7.834584] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
[ 7.848858] tuner 1-0043: chip found @ 0x86 (cx88[0])
[ 7.853132] tda9887 1-0043: creating new instance
[ 7.853134] tda9887 1-0043: tda988[5/6/7] found
[ 7.855508] tuner 1-0061: chip found @ 0xc2 (cx88[0])
[ 7.893915] tveeprom 1-0050: Hauppauge model 69009, rev B2A0, serial# 1241047
[ 7.893917] tveeprom 1-0050: MAC address is 00-0D-FE-12-EF-D7
[ 7.893919] tveeprom 1-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
[ 7.893922] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 7.893924] tveeprom 1-0050: audio processor is CX882 (idx 33)
[ 7.893926] tveeprom 1-0050: decoder processor is CX882 (idx 25)
[ 7.893927] tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
[ 7.893929] cx88[0]: hauppauge eeprom: model=69009
[ 7.901673] tuner-simple 1-0061: creating new instance
[ 7.901675] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 7.905755] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:08.0/0000:01:07.1/input/input7
[ 7.905784] IRQ 16/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.905811] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 7.906091] cx8800 0000:01:07.0: PCI INT A -> Link[LNKC] -> GSI 16 (level, low) -> IRQ 16
[ 7.906097] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xf6000000
[ 7.906103] IRQ 16/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.907086] wm8775 1-001b: chip found @ 0x36 (cx88[0])
[ 7.913498] cx88[0]/0: registered device video0 [v4l2]
[ 7.913511] cx88[0]/0: registered device vbi0
[ 7.913524] cx88[0]/0: registered device radio0
[ 7.918066] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 7.918069] Mantis 0000:01:06.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
[ 7.918097] irq: 19, latency: 32
[ 7.918098] memory: 0xd5fff000, mmio: 0xf96f6000
[ 7.918100] found a VP-1041 PCI DSS/DVB-S/DVB-S2 device on (01:06.0),
[ 7.918102] Mantis Rev 1 [1ae4:0003], irq: 19, latency: 32
[ 7.918104] memory: 0xd5fff000, mmio: 0xf96f6000
[ 7.921429] MAC Address=[00:08:c9:e0:7b:ba]
[ 7.921448] mantis_alloc_buffers (0): DMA=0x350f0000 cpu=0xf50f0000 size=65536
[ 7.921466] mantis_alloc_buffers (0): RISC=0x35089000 cpu=0xf5089000 size=1000
[ 7.921481] DVB: registering new adapter (Mantis dvb adapter)
[ 8.453786] RPC: Registered udp transport module.
[ 8.453788] RPC: Registered tcp transport module.
[ 8.466427] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.471623] stb0899_attach: Attaching STB0899
[ 8.471626] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2 frontend @0x68
[ 8.471655] stb6100_attach: Attaching STB6100
[ 8.472004] LNBx2x attached on addr=8
[ 8.472006] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[ 8.472054] mantis_ca_init (0): Registering EN50221 device
[ 8.472226] mantis_ca_init (0): Registered EN50221 device
[ 8.472254] mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface
[ 8.472332] input: Mantis VP-1041 IR Receiver as /devices/virtual/input/input8
[ 8.473437] cx88[0]/2: cx2388x 8802 Driver Manager
[ 8.473466] cx88-mpeg driver manager 0000:01:07.2: PCI INT A -> Link[LNKC] -> GSI 16 (level, low) -> IRQ 16
[ 8.473482] cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 16, latency: 32, mmio: 0xf8000000
[ 8.473494] IRQ 16/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.477863] cx88/2: cx2388x dvb driver version 0.0.7 loaded
[ 8.477865] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 8.477868] cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
[ 8.477870] cx88[0]/2: cx2388x based DVB/ATSC card
[ 8.477872] cx8802_alloc_frontends() allocating 2 frontend(s)
[ 8.513046] tuner-simple 1-0061: attaching existing instance
[ 8.513049] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 8.515333] DVB: registering new adapter (cx88[0])
[ 8.515335] DVB: registering adapter 1 frontend 0 (Conexant CX24116/CX24118)...
[ 8.515504] DVB: registering adapter 1 frontend 1 (Conexant CX22702 DVB-T)...
[ 8.532273] svc: failed to register lockdv1 RPC service (errno 97).
[ 8.532757] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 8.532908] NFSD: starting 90-second grace period
[ 8.746035] CPU0 attaching NULL sched-domain.
[ 8.746039] CPU1 attaching NULL sched-domain.
[ 8.760681] CPU0 attaching sched-domain:
[ 8.760689] domain 0: span 0-1 level MC
[ 8.760697] groups: 0 1
[ 8.760707] domain 1: span 0-1 level CPU
[ 8.760713] groups: 0-1 (__cpu_power = 2048)
[ 8.760725] CPU1 attaching sched-domain:
[ 8.760730] domain 0: span 0-1 level MC
[ 8.760736] groups: 1 0
[ 8.760744] domain 1: span 0-1 level CPU
[ 8.760749] groups: 0-1 (__cpu_power = 2048)
[ 8.764268] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.776262] Linux agpgart interface v0.103
[ 8.796522] nvidia: module license 'NVIDIA' taints kernel.
[ 8.796527] Disabling lock debugging due to kernel taint
[ 9.051132] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[ 9.051137] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
[ 9.051143] nvidia 0000:02:00.0: setting latency timer to 64
[ 9.051277] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.30 Fri Dec 18 13:34:49 PST 2009
[ 13.097694] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
[ 13.097707] cx88_audio 0000:01:07.1: firmware: requesting dvb-fe-cx24116.fw
[ 13.116279] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
[ 18.348539] cx24116_load_firmware: FW version 1.23.86.1
[ 18.348553] cx24116_firmware_ondemand: Firmware upload complete
[ 18.656518] eth0: no IPv6 routers present
[ 49.033820] mantis start feed & dma
[ 132.000348] mantis stop feed and dma
[ 132.000416] mantis start feed & dma

syslog
code: 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:

 Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: wirbelscan
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: epgsearchonly
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: menuorg
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: iptv
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: femon
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: conflictcheckonly
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: text2skin
Feb 9 22:47:43 YaVDR-HD vdr: [3805] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors
Feb 9 22:47:43 YaVDR-HD vdr: [3805] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: externalplayer
Feb 9 22:47:43 YaVDR-HD vdr: [3805] plugin 'externalplayer' called obsolete function RegisterI18n()
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: extrecmenu
Feb 9 22:47:43 YaVDR-HD vdr: [3830] extrecmenu worker thread thread started (pid=3805, tid=3830)
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: quickepgsearch
Feb 9 22:47:43 YaVDR-HD vdr: [3805] setting current skin to "PearlHD"
Feb 9 22:47:43 YaVDR-HD vdr: [3805] loading /var/lib/vdr/themes/PearlHD-default.theme
Feb 9 22:47:43 YaVDR-HD lircd-0.8.6[3354]: accepted new client on /var/run/lirc/lircd
Feb 9 22:47:43 YaVDR-HD lircd-0.8.6[3354]: initializing '/dev/input/cx88ir'
Feb 9 22:47:43 YaVDR-HD vdr: [3805] remote control LIRC - keys known
Feb 9 22:47:43 YaVDR-HD vdr: [3805] switching to channel 18
Feb 9 22:47:43 YaVDR-HD vdr: [3831] LIRC remote control thread started (pid=3805, tid=3831)
Feb 9 22:47:43 YaVDR-HD vdr: [3833] receiver on device 2 thread started (pid=3805, tid=3833)
Feb 9 22:47:43 YaVDR-HD vdr: [3834] TS buffer on device 2 thread started (pid=3805, tid=3834)
Feb 9 22:47:43 YaVDR-HD vdr: [3805] setting watchdog timer to 60 seconds
Feb 9 22:47:43 YaVDR-HD vdr: [3805] OSD size changed to 1920x1080 @ 1
Feb 9 22:47:43 YaVDR-HD vdr: [3835] Text2Skin: channelInfo display update thread started (pid=3805, tid=3835)
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 1 from 8 FlushTime = 1 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 2 from 8 FlushTime = 3 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 3 from 8 FlushTime = 2 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 4 from 8 FlushTime = 3 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 5 from 8 FlushTime = 2 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 6 from 8 FlushTime = 2 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 7 from 8 FlushTime = 3 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 8 from 8 FlushTime = 2 ms
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] Client 0 connected: 127.0.0.1:35546
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Server greeting: VDR-1.7.10 xineliboutput-1.0.90-cvs READY
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] Trying PIPE connection ...
Feb 9 22:47:43 YaVDR-HD vdr: [3817] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.3805
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.3805/pipe.0
Feb 9 22:47:43 YaVDR-HD vdr: [3817] removing /var/lib/vdr/plugins/xineliboutput/pipes.3805
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] cBackgroundWriterI initialized (buffer 512 kb)
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] cTcpWriter initialized (buffer 512 kb)
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] Pipe open
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Data stream connected (PIPE)
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [demux_vdr] Using decoder "FFmpeg" for H.264 video
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3839] [demux_vdr] PMT changed
Feb 9 22:47:44 YaVDR-HD vdr: [3824] EPGSearch: timer conflict check started
Feb 9 22:47:44 YaVDR-HD vdr: [3824] EPGSearch: timer conflict check finished
Feb 9 22:47:44 YaVDR-HD vdr: [3833] [xine..put] cXinelibServer::Play_PES Buffer overflow (TCP/PIPE)
Feb 9 22:47:45 YaVDR-HD vdr: last message repeated 43 times
Feb 9 22:47:45 YaVDR-HD vdr: [3814] changing pids of channel 21 from 6210+6210=27:6221=deu,6222=fra;6220=deu:0:6230 to 6210+6210=27:6221=deu,6222=fra;6220=deu:6231=fra:6230
Feb 9 22:47:48 YaVDR-HD vdr: [3835] Text2Skin: channelInfo display update thread ended (pid=3805, tid=3835)
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 1 from 8 FlushTime = 3 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 2 from 8 FlushTime = 3 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 3 from 8 FlushTime = 3 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 4 from 8 FlushTime = 3 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 5 from 8 FlushTime = 4 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 6 from 8 FlushTime = 1 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 7 from 8 FlushTime = 1 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 8 from 8
Feb 9 22:47:49 YaVDR-HD vdr: [3805] max. latency time 1 seconds
Feb 9 22:48:15 YaVDR-HD vdr: [3841] Text2Skin: channelInfo display update thread started (pid=3805, tid=3841)
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 1 from 8 FlushTime = 1 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 2 from 8 FlushTime = 3 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 3 from 8 FlushTime = 4 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 4 from 8 FlushTime = 1 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 5 from 8 FlushTime = 3 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 6 from 8 FlushTime = 3 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 7 from 8 FlushTime = 3 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 8 from 8 FlushTime = 3 ms
Feb 9 22:48:16 YaVDR-HD vdr: [3805] switching to channel 1
Feb 9 22:48:16 YaVDR-HD vdr: [3834] TS buffer on device 2 thread ended (pid=3805, tid=3834)
Feb 9 22:48:16 YaVDR-HD vdr: [3833] buffer stats: 179352 (8%) used
Feb 9 22:48:16 YaVDR-HD vdr: [3833] receiver on device 2 thread ended (pid=3805, tid=3833)
Feb 9 22:48:16 YaVDR-HD vdr: [3842] receiver on device 2 thread started (pid=3805, tid=3842)
Feb 9 22:48:16 YaVDR-HD vdr: [3843] TS buffer on device 2 thread started (pid=3805, tid=3843)
Feb 9 22:48:16 YaVDR-HD vdr-sxfe[3611]: [3839] [demux_vdr] PMT changed
Feb 9 22:48:19 YaVDR-HD vdr: [3805] switching to channel 2
Feb 9 22:48:19 YaVDR-HD vdr-sxfe[3611]: [3838] [input_vdr] vdr_flush_engine: playback is paused <0>
Feb 9 22:48:19 YaVDR-HD vdr: [3843] TS buffer on device 2 thread ended (pid=3805, tid=3843)
Feb 9 22:48:19 YaVDR-HD vdr: [3842] buffer stats: 3572 (0%) used
Feb 9 22:48:19 YaVDR-HD vdr: [3842] receiver on device 2 thread ended (pid=3805, tid=3842)
Feb 9 22:48:20 YaVDR-HD vdr: [3845] receiver on device 2 thread started (pid=3805, tid=3845)
Feb 9 22:48:20 YaVDR-HD vdr: [3846] TS buffer on device 2 thread started (pid=3805, tid=3846)
Feb 9 22:48:20 YaVDR-HD vdr-sxfe[3611]: [3839] [demux_vdr] PMT changed
Feb 9 22:48:22 YaVDR-HD vdr: [3814] changing pids of channel 1358 from 401+401=2:402=deu:0:0 to 501+501=2:502=deu:0:0
Feb 9 22:48:24 YaVDR-HD vdr: [3841] Text2Skin: channelInfo display update thread ended (pid=3805, tid=3841)
Feb 9 22:48:24 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 1 from 8 FlushTime = 4 ms
Feb 9 22:48:24 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 2 from 8 FlushTime = 3 ms
Feb 9 22:48:24 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 3 from 8 FlushTime = 3 ms
Feb 9 22:48:24 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 4 from 8 FlushTime = 4 ms
Feb 9 22:48:25 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 5 from 8 FlushTime = 3 ms
Feb 9 22:48:25 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 6 from 8 FlushTime = 3 ms
Feb 9 22:48:25 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 7 from 8 FlushTime = 3 ms
Feb 9 22:48:25 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 8 from 8
user.log
code: 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:

 Feb 9 22:47:43 YaVDR-HD vdr: [3824] EPGSearch: conflictcheck thread started (pid=3805, tid=3824)
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: wirbelscan
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: epgsearchonly
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: menuorg
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: iptv
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: femon
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: conflictcheckonly
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: text2skin
Feb 9 22:47:43 YaVDR-HD vdr: [3805] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors
Feb 9 22:47:43 YaVDR-HD vdr: [3805] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: externalplayer
Feb 9 22:47:43 YaVDR-HD vdr: [3805] plugin 'externalplayer' called obsolete function RegisterI18n()
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: extrecmenu
Feb 9 22:47:43 YaVDR-HD vdr: [3830] extrecmenu worker thread thread started (pid=3805, tid=3830)
Feb 9 22:47:43 YaVDR-HD vdr: [3805] starting plugin: quickepgsearch
Feb 9 22:47:43 YaVDR-HD vdr: [3805] setting current skin to "PearlHD"
Feb 9 22:47:43 YaVDR-HD vdr: [3805] loading /var/lib/vdr/themes/PearlHD-default.theme
Feb 9 22:47:43 YaVDR-HD vdr: [3805] remote control LIRC - keys known
Feb 9 22:47:43 YaVDR-HD vdr: [3805] switching to channel 18
Feb 9 22:47:43 YaVDR-HD vdr: [3831] LIRC remote control thread started (pid=3805, tid=3831)
Feb 9 22:47:43 YaVDR-HD vdr: [3833] receiver on device 2 thread started (pid=3805, tid=3833)
Feb 9 22:47:43 YaVDR-HD vdr: [3834] TS buffer on device 2 thread started (pid=3805, tid=3834)
Feb 9 22:47:43 YaVDR-HD vdr: [3805] setting watchdog timer to 60 seconds
Feb 9 22:47:43 YaVDR-HD vdr: [3805] OSD size changed to 1920x1080 @ 1
Feb 9 22:47:43 YaVDR-HD vdr: [3835] Text2Skin: channelInfo display update thread started (pid=3805, tid=3835)
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 1 from 8 FlushTime = 1 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 2 from 8 FlushTime = 3 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 3 from 8 FlushTime = 2 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 4 from 8 FlushTime = 3 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 5 from 8 FlushTime = 2 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 6 from 8 FlushTime = 2 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 7 from 8 FlushTime = 3 ms
Feb 9 22:47:43 YaVDR-HD vdr: [3835] SOFTOSD: FadeIn Step 8 from 8 FlushTime = 2 ms
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] Client 0 connected: 127.0.0.1:35546
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Server greeting: VDR-1.7.10 xineliboutput-1.0.90-cvs READY
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] Trying PIPE connection ...
Feb 9 22:47:43 YaVDR-HD vdr: [3817] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.3805
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.3805/pipe.0
Feb 9 22:47:43 YaVDR-HD vdr: [3817] removing /var/lib/vdr/plugins/xineliboutput/pipes.3805
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] cBackgroundWriterI initialized (buffer 512 kb)
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] cTcpWriter initialized (buffer 512 kb)
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] Pipe open
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Data stream connected (PIPE)
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [demux_vdr] Using decoder "FFmpeg" for H.264 video
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3839] [demux_vdr] PMT changed
Feb 9 22:47:44 YaVDR-HD vdr: [3824] EPGSearch: timer conflict check started
Feb 9 22:47:44 YaVDR-HD vdr: [3824] EPGSearch: timer conflict check finished
Feb 9 22:47:44 YaVDR-HD vdr: [3833] [xine..put] cXinelibServer::Play_PES Buffer overflow (TCP/PIPE)
Feb 9 22:47:45 YaVDR-HD vdr: last message repeated 43 times
Feb 9 22:47:45 YaVDR-HD vdr: [3814] changing pids of channel 21 from 6210+6210=27:6221=deu,6222=fra;6220=deu:0:6230 to 6210+6210=27:6221=deu,6222=fra;6220=deu:6231=fra:6230
Feb 9 22:47:48 YaVDR-HD vdr: [3835] Text2Skin: channelInfo display update thread ended (pid=3805, tid=3835)
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 1 from 8 FlushTime = 3 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 2 from 8 FlushTime = 3 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 3 from 8 FlushTime = 3 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 4 from 8 FlushTime = 3 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 5 from 8 FlushTime = 4 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 6 from 8 FlushTime = 1 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 7 from 8 FlushTime = 1 ms
Feb 9 22:47:48 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 8 from 8
Feb 9 22:47:49 YaVDR-HD vdr: [3805] max. latency time 1 seconds
Feb 9 22:48:15 YaVDR-HD vdr: [3841] Text2Skin: channelInfo display update thread started (pid=3805, tid=3841)
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 1 from 8 FlushTime = 1 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 2 from 8 FlushTime = 3 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 3 from 8 FlushTime = 4 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 4 from 8 FlushTime = 1 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 5 from 8 FlushTime = 3 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 6 from 8 FlushTime = 3 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 7 from 8 FlushTime = 3 ms
Feb 9 22:48:15 YaVDR-HD vdr: [3841] SOFTOSD: FadeIn Step 8 from 8 FlushTime = 3 ms
Feb 9 22:48:16 YaVDR-HD vdr: [3805] switching to channel 1
Feb 9 22:48:16 YaVDR-HD vdr: [3834] TS buffer on device 2 thread ended (pid=3805, tid=3834)
Feb 9 22:48:16 YaVDR-HD vdr: [3833] buffer stats: 179352 (8%) used
Feb 9 22:48:16 YaVDR-HD vdr: [3833] receiver on device 2 thread ended (pid=3805, tid=3833)
Feb 9 22:48:16 YaVDR-HD vdr: [3842] receiver on device 2 thread started (pid=3805, tid=3842)
Feb 9 22:48:16 YaVDR-HD vdr: [3843] TS buffer on device 2 thread started (pid=3805, tid=3843)
Feb 9 22:48:16 YaVDR-HD vdr-sxfe[3611]: [3839] [demux_vdr] PMT changed
Feb 9 22:48:19 YaVDR-HD vdr: [3805] switching to channel 2
Feb 9 22:48:19 YaVDR-HD vdr-sxfe[3611]: [3838] [input_vdr] vdr_flush_engine: playback is paused <0>
Feb 9 22:48:19 YaVDR-HD vdr: [3843] TS buffer on device 2 thread ended (pid=3805, tid=3843)
Feb 9 22:48:19 YaVDR-HD vdr: [3842] buffer stats: 3572 (0%) used
Feb 9 22:48:19 YaVDR-HD vdr: [3842] receiver on device 2 thread ended (pid=3805, tid=3842)
Feb 9 22:48:20 YaVDR-HD vdr: [3845] receiver on device 2 thread started (pid=3805, tid=3845)
Feb 9 22:48:20 YaVDR-HD vdr: [3846] TS buffer on device 2 thread started (pid=3805, tid=3846)
Feb 9 22:48:20 YaVDR-HD vdr-sxfe[3611]: [3839] [demux_vdr] PMT changed
Feb 9 22:48:22 YaVDR-HD vdr: [3814] changing pids of channel 1358 from 401+401=2:402=deu:0:0 to 501+501=2:502=deu:0:0
Feb 9 22:48:24 YaVDR-HD vdr: [3841] Text2Skin: channelInfo display update thread ended (pid=3805, tid=3841)
Feb 9 22:48:24 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 1 from 8 FlushTime = 4 ms
Feb 9 22:48:24 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 2 from 8 FlushTime = 3 ms
Feb 9 22:48:24 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 3 from 8 FlushTime = 3 ms
Feb 9 22:48:24 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 4 from 8 FlushTime = 4 ms
Feb 9 22:48:25 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 5 from 8 FlushTime = 3 ms
Feb 9 22:48:25 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 6 from 8 FlushTime = 3 ms
Feb 9 22:48:25 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 7 from 8 FlushTime = 3 ms
Feb 9 22:48:25 YaVDR-HD vdr: [3805] SOFTOSD: FadeOut Step 8 from 8
Feb 9 22:48:36 YaVDR-HD vdr: [3814] changing pids of channel 1358 from 501+501=2:502=deu:0:0 to 401+401=2:402=deu:0:0
messages
code: 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:

 Feb 9 22:46:59 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 607534 bytes/s (4746 kbit/s)
Feb 9 22:47:00 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 635385 bytes/s (4963 kbit/s)
Feb 9 22:47:02 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 634493 bytes/s (4956 kbit/s)
Feb 9 22:47:03 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 526747 bytes/s (4115 kbit/s)
Feb 9 22:47:04 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 425036 bytes/s (3320 kbit/s)
Feb 9 22:47:05 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 527597 bytes/s (4121 kbit/s)
Feb 9 22:47:06 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 421507 bytes/s (3293 kbit/s)
Feb 9 22:47:07 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 525710 bytes/s (4107 kbit/s)
Feb 9 22:47:09 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 525894 bytes/s (4108 kbit/s)
Feb 9 22:47:10 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 421795 bytes/s (3295 kbit/s)
Feb 9 22:47:11 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 526135 bytes/s (4110 kbit/s)
Feb 9 22:47:12 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 530139 bytes/s (4141 kbit/s)
Feb 9 22:47:12 YaVDR-HD vdr-sxfe[3611]: [3623] [demux_vdr] PMT changed
Feb 9 22:47:13 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 320539 bytes/s (2504 kbit/s)
Feb 9 22:47:14 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 288104 bytes/s (2250 kbit/s)
Feb 9 22:47:15 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 389342 bytes/s (3041 kbit/s)
Feb 9 22:47:17 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 405098 bytes/s (3164 kbit/s)
Feb 9 22:47:18 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 405278 bytes/s (3166 kbit/s)
Feb 9 22:47:19 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 405862 bytes/s (3170 kbit/s)
Feb 9 22:47:20 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 406492 bytes/s (3175 kbit/s)
Feb 9 22:47:21 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 406438 bytes/s (3175 kbit/s)
Feb 9 22:47:23 YaVDR-HD vdr: [3634] [xine..put] OSD bandwidth: 407096 bytes/s (3180 kbit/s)
Feb 9 22:47:23 YaVDR-HD vdr-sxfe[3611]: [3623] [demux_vdr] PMT changed
Feb 9 22:47:23 YaVDR-HD kernel: [ 899.117839] femon receiver[3735]: segfault at a4ef1000 ip 00556071 sp a69fa27c error 4 in libc-2.10.1.so[4e1000+13e000]
Feb 9 22:47:23 YaVDR-HD vdr-sxfe[3611]: [3623] [input_vdr] read_block: no data source, returning NULL
Feb 9 22:47:23 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:23 YaVDR-HD runvdr: restarting VDR
Feb 9 22:47:23 YaVDR-HD kernel: [ 899.300783] mantis stop feed and dma
Feb 9 22:47:23 YaVDR-HD kernel: [ 899.417803] Mantis 0000:01:06.0: PCI INT A disabled
Feb 9 22:47:23 YaVDR-HD kernel: [ 899.433189] cx88/2: unregistering cx8802 driver, type: dvb access: shared
Feb 9 22:47:23 YaVDR-HD kernel: [ 899.433192] cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
Feb 9 22:47:25 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:25 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:25 YaVDR-HD vdr-sxfe[3611]: [3611] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1:37890#nocache") failed
Feb 9 22:47:26 YaVDR-HD kernel: [ 901.665621] Mantis 0000:01:06.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
Feb 9 22:47:26 YaVDR-HD kernel: [ 901.665673] irq: 19, latency: 32
Feb 9 22:47:26 YaVDR-HD kernel: [ 901.665676] memory: 0xd5fff000, mmio: 0xf804c000
Feb 9 22:47:26 YaVDR-HD kernel: [ 901.665684] found a VP-1041 PCI DSS/DVB-S/DVB-S2 device on (01:06.0),
Feb 9 22:47:26 YaVDR-HD kernel: [ 901.665690] Mantis Rev 1 [1ae4:0003], irq: 19, latency: 32
Feb 9 22:47:26 YaVDR-HD kernel: [ 901.665697] memory: 0xd5fff000, mmio: 0xf804c000
Feb 9 22:47:26 YaVDR-HD kernel: [ 901.668427] MAC Address=[00:08:c9:e0:7b:ba]
Feb 9 22:47:26 YaVDR-HD kernel: [ 901.668494] DVB: registering new adapter (Mantis dvb adapter)
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.217354] stb0899_attach: Attaching STB0899
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.217359] stb6100_attach: Attaching STB6100
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.217708] LNBx2x attached on addr=8
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.217710] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.218865] input: Mantis VP-1041 IR Receiver as /devices/virtual/input/input9
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.222635] cx88/2: cx2388x dvb driver version 0.0.7 loaded
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.222639] cx88/2: registering cx8802 driver, type: dvb access: shared
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.222641] cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.222646] cx88[0]/2: cx2388x based DVB/ATSC card
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.222647] cx8802_alloc_frontends() allocating 2 frontend(s)
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.227763] tuner-simple 1-0061: attaching existing instance
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.227766] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.230842] DVB: registering new adapter (cx88[0])
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.230844] DVB: registering adapter 1 frontend 0 (Conexant CX24116/CX24118)...
Feb 9 22:47:26 YaVDR-HD kernel: [ 902.230998] DVB: registering adapter 1 frontend 1 (Conexant CX22702 DVB-T)...
Feb 9 22:47:27 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:27 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:27 YaVDR-HD vdr-sxfe[3611]: [3611] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1:37890#nocache") failed
Feb 9 22:47:29 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:29 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:29 YaVDR-HD vdr-sxfe[3611]: [3611] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1:37890#nocache") failed
Feb 9 22:47:31 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:31 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:31 YaVDR-HD vdr-sxfe[3611]: [3611] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1:37890#nocache") failed
Feb 9 22:47:33 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:33 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:33 YaVDR-HD vdr-sxfe[3611]: [3611] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1:37890#nocache") failed
Feb 9 22:47:35 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:35 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:35 YaVDR-HD vdr-sxfe[3611]: [3611] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1:37890#nocache") failed
Feb 9 22:47:37 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:37 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:37 YaVDR-HD vdr-sxfe[3611]: [3611] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1:37890#nocache") failed
Feb 9 22:47:39 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:39 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:39 YaVDR-HD vdr-sxfe[3611]: [3611] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1:37890#nocache") failed
Feb 9 22:47:41 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:41 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connections closed.
Feb 9 22:47:41 YaVDR-HD vdr-sxfe[3611]: [3611] [vdr-fe] fe_xine_open: xine_open("xvdr://127.0.0.1:37890#nocache") failed
Feb 9 22:47:41 YaVDR-HD vdr: [3805] [xine..put] Listening on address '127.0.0.1' port 37890
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] Listening on port 37890
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] Listening for UDP broadcasts on port 37890
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Feb 9 22:47:43 YaVDR-HD vdr: [3817] [xine..put] Client 0 connected: 127.0.0.1:35546
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Server greeting: VDR-1.7.10 xineliboutput-1.0.90-cvs READY
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.3805/pipe.0
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] Data stream connected (PIPE)
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3611] [demux_vdr] Using decoder "FFmpeg" for H.264 video
Feb 9 22:47:43 YaVDR-HD vdr-sxfe[3611]: [3839] [demux_vdr] PMT changed
Feb 9 22:47:44 YaVDR-HD vdr: [3833] [xine..put] cXinelibServer::Play_PES Buffer overflow (TCP/PIPE)
Feb 9 22:48:16 YaVDR-HD vdr: last message repeated 43 times
Feb 9 22:48:16 YaVDR-HD vdr-sxfe[3611]: [3839] [demux_vdr] PMT changed
Feb 9 22:48:19 YaVDR-HD vdr-sxfe[3611]: [3838] [input_vdr] vdr_flush_engine: playback is paused <0>
Feb 9 22:48:20 YaVDR-HD vdr-sxfe[3611]: [3839] [demux_vdr] PMT changed
Feb 9 22:49:21 YaVDR-HD kernel: [ 1017.036143] mantis start feed & dma


__________________
Asus M4N78 PRO 2G, HVR 4000, SkyStar2HD, Atric-IR-Einschalter

This post has been edited 1 time(s), it was last edited by EasyAxel: 09.02.2010 22:56.
09.02.2010 22:53 EasyAxel is offline Send an Email to EasyAxel Search for Posts by EasyAxel Add EasyAxel to your Buddy List
roland_s
Jungspund


Registration Date: 19.05.2009
Posts: 39
RE: HVR4000 nicht alle Sender Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Versuch man eine neuere/ältere firmware:
hier

lg

__________________
yaVDR 0.1 | VDR 1.7.10
Gigabyte - M61PME-S2 | AMD - Sempron LE-1250
Hauppauge - Nova HD S2 | MSI TV@nywhere Satelite Pro
11.02.2010 12:05 roland_s is offline Send an Email to roland_s Search for Posts by roland_s Add roland_s to your Buddy List
steffen_b steffen_b is a male
Freiherr


images/avatars/avatar-3382.gif

Registration Date: 30.04.2004
Posts: 1,822
Berufung: Distributions-Entwic kler
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Googeln hilft, wahrscheinlich hat das zu geschlagen und Easyvdr hat einen älterne/neueren Kernel. k.A. ob liplianin das schon gemerged hat...

https://bugs.launchpad.net/mythbuntu/+bu...63?comments=all
http://hg.kewl.org/v4l-dvb-20100130/

__________________
VDR User: 87 - LaScala LC14B - LG/Phillipps 6,4" VGA Display
Gigabyte EP45T UD3LR | C2D E7400| 1x 16GB Mobi Mtron 3035 WD10EADS 2x 1000 GB |Tevii S470 | SkyStar 2 2.6d
Baustellen: Hipermedia Gehäuse + Pentium M ULV + DFI 915 Mainboard
11.02.2010 12:41 steffen_b is online Send an Email to steffen_b Homepage of steffen_b Search for Posts by steffen_b Add steffen_b to your Buddy List
EasyAxel
Jungspund


Registration Date: 07.02.2010
Posts: 21

Thread Starter Thread Started by EasyAxel
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Die Firmware ist die gleiche wie im Easyvdr. Die orginale von Ubunto ging garnicht.

Danke für die Links. Aber so bewandert bin ich leider nicht. Was heist das jetzt für mich oder die Distribution?

__________________
Asus M4N78 PRO 2G, HVR 4000, SkyStar2HD, Atric-IR-Einschalter

This post has been edited 1 time(s), it was last edited by EasyAxel: 11.02.2010 14:47.
11.02.2010 14:45 EasyAxel is offline Send an Email to EasyAxel Search for Posts by EasyAxel Add EasyAxel to your Buddy List
steffen_b steffen_b is a male
Freiherr


images/avatars/avatar-3382.gif

Registration Date: 30.04.2004
Posts: 1,822
Berufung: Distributions-Entwic kler
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Ich will eh richtung WE schauen ob ich ein neues Paket machen kann, also entweder warten oder selber kompilieren

__________________
VDR User: 87 - LaScala LC14B - LG/Phillipps 6,4" VGA Display
Gigabyte EP45T UD3LR | C2D E7400| 1x 16GB Mobi Mtron 3035 WD10EADS 2x 1000 GB |Tevii S470 | SkyStar 2 2.6d
Baustellen: Hipermedia Gehäuse + Pentium M ULV + DFI 915 Mainboard
11.02.2010 15:18 steffen_b is online Send an Email to steffen_b Homepage of steffen_b Search for Posts by steffen_b Add steffen_b to your Buddy List
EasyAxel
Jungspund


Registration Date: 07.02.2010
Posts: 21

Thread Starter Thread Started by EasyAxel
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Ich warte und teste dann gerne.

Danke Axel

__________________
Asus M4N78 PRO 2G, HVR 4000, SkyStar2HD, Atric-IR-Einschalter
12.02.2010 01:52 EasyAxel is offline Send an Email to EasyAxel Search for Posts by EasyAxel Add EasyAxel to your Buddy List
jensemann70
Grünschnabel


Registration Date: 22.02.2010
Posts: 9
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Hallo, ist zwar schon etwas älter der Post aber anscheinend noch nicht gelöst. Bzgl. fehlender Sender hatte ich sowohl mit der Skystar2 als auch mit der Nova HD-S2 gleiche Probleme: EinsExtra, arte, einsFestival liefen, aber ARD, ZDF und die Privaten nicht. Unter Kaffeine lief die Skystar allerdings ohne Probleme, alle Sender funktionierten (Nova unter Kaffeine nicht getestet).
Die Lösung innerhalb VDR: Diseqc unter Menu->LNB->DiSEqC benutzen = ja

Fragt mich nicht warum und vielleicht hilft es hier gar nicht, denn ich habe nur einen LNB und einen Satelitten.
Wenn ich das hier richtig lese, geht es um vier Satelliten und Diseqc ist deshalb vielleicht schon aktiviert.... aber vielleicht hilft es auch.

Gruß
jensemann

__________________
Hartes: Point of View ION 330-1; 2GB RAM; Hauppauge Nova HD-S2 (+ Firmware v1.26.90.0)
Weiches: yaVDR 0.1
03.03.2010 14:32 jensemann70 is offline Send an Email to jensemann70 Search for Posts by jensemann70 Add jensemann70 to your Buddy List
EasyAxel
Jungspund


Registration Date: 07.02.2010
Posts: 21

Thread Starter Thread Started by EasyAxel
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page
Danke!

Hat funktioniert. Kann zwar auch am Update gelegen haben, aber DiSEqC war acu nicht eingeschaltet.

gruß Axel

__________________
Asus M4N78 PRO 2G, HVR 4000, SkyStar2HD, Atric-IR-Einschalter
07.03.2010 17:18 EasyAxel is offline Send an Email to EasyAxel Search for Posts by EasyAxel Add EasyAxel to your Buddy List
Tree Structure | Board Structure
Jump to:
Post New Thread Post Reply
VDR Portal » Linux » Betriebssystem » yaVDR » (gelöst) HVR4000 nicht alle Sender

www.vdr-portal.de VDR Portal © 2002-2006 by genka
Forum Software: Burning Board 2.3.4, Developed by WoltLab GmbH