VDR Portal
Register Calendar Members List Team Members Search Frequently Asked Questions Gallery Go to the Main Page

VDR Portal » VDR Hardware » Allgemein » Audio via HDMI Ausgang der Grafikkarte? » Hello Guest [Login|Register]
Last Post | First Unread Post Print Page | Recommend to a Friend | Add Thread to Favorites
Pages (2): [1] 2 next » Post New Thread Post Reply
Go to the bottom of this page Audio via HDMI Ausgang der Grafikkarte?
Author
Post « Previous Thread | Next Thread »
C-3PO C-3PO is a male
Fürst


images/avatars/avatar-2553.jpg

Registration Date: 04.12.2005
Posts: 2,800
Herkunft: Schwabenländle

Fragezeichen Audio via HDMI Ausgang der Grafikkarte? Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Hallm Zusammen,

Ich habe eine GeForce 8400GS mit HDMI Ausgang in meinem Testsystem verbaut.
Jetzt wollte ich mal den HDMI Ausgang testen. Die Bildausgabe funktioniert so weit auch, leider aber Audio nicht.
Jetzt habe ich gelesen, dass man dazu das beigelegte Käbelchen an den SPDIF Ausgang des Mainboards anschließen muss, was ich auch getan habe.

Laut aplay iist ja auch alles da:

code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
vdr02 / # aplay -L
default:CARD=Intel
    HDA Intel, AD198x Analog
    Default Audio Device
front:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    Front speakers
surround40:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
    HDA Intel, AD198x Digital
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=Intel,DEV=0
    HDA Intel
    HDMI Audio Output
null
    Discard all samples (playback) or generate zero samples (capture)
vdr02 / #


Muss da noch irgend etwas eingestellt weden, - und falls ja, wie und wo?

__________________
Gen2VDR V3 Beta 6


Mainboard: Zotac IONITX-F-E
DVB: DuoFlex S2 miniPCIe
RAM: 2x 2 GB
System HDD: 32 GB Patriot Warp 2,5" SSD-SATA
Video HDD: WD Caviar Green, 2 TB
DVD: NEC Optiarc AD-7670S
LCD: Linux4Media l4m132c
IR: atric-Einschalter v5 ; Harmony 885

This post has been edited 1 time(s), it was last edited by C-3PO: 24.02.2009 22:31.

24.02.2009 22:10 C-3PO is offline Send an Email to C-3PO Search for Posts by C-3PO Add C-3PO to your Buddy List Add C-3PO to your Contact List
magicdragon67 magicdragon67 is a male
Ritter


images/avatars/avatar-1112.jpg

Registration Date: 17.04.2004
Posts: 1,055
Herkunft: Leimen

RE: Audio via HDMI Ausgang der Grafikkarte? Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Hi,

villeicht im MUXer stumm geschaltet ??

__________________
SYSTEM 1 Intel D945GCLF2, 2GB Ram, 320GB2,5"-FP, DVb-S FF, pass. ext. Netzteil MLD 2.0
SYSTEM 2 (SERVER 24/7) M811 + GEODE NX 1750, 3TB RAID5 , DVb-S FF, 2 x Budget GEN2VDR 2.0

Testsystem:
Gen2VDR V3 B7-7 (VDPAU) POV-ION 330 Board 4GB-Ram, TEVII S470, 500GB 2,5" SATA, Silverstone MLC-02 Gehäuse IMON-LCD mit FB


portal1
25.02.2009 09:05 magicdragon67 is offline Send an Email to magicdragon67 Search for Posts by magicdragon67 Add magicdragon67 to your Buddy List
Hemonu Hemonu is a male
Doppel-Ass


Registration Date: 03.02.2004
Posts: 118

RE: Audio via HDMI Ausgang der Grafikkarte? Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Zur Nutzung des HDMI-Tons brauchst du ziemlich aktuelle ALSA-Treiber.
Poste doch bitte mal die Ausgabe von

aplay -l

Dort müsste ein drittes Hardware-Device für den HDMI-Ton sichtbar sein, ansonsten update der ALSA-Treiber durchführen.

MfG

hemonu

__________________
Don't Panic !!!

Server: K9N Neo-F, Sempron, 1xFF, 2xNova, UHF Modulator zur Hauseinspeisung, Debian Etch, e-tobi VDR 1.6
Client 1: Asus M2NPV-VM, Nvidia 9500GT, Nova HD-S2, Ubuntu 9.04, e-tobi/Hanno VDR 1.6/1.7.8 + vdpau-test, SAMSUNG LE26R32 via HDMI
Client 2: ACER Revo 3600, TT CT-3650 CI, Debian Lenny, e-tobi VDR 1.6/1.7.11 + vdpau, Panasonic TH-42PZ85E via HDMI

25.02.2009 09:40 Hemonu is offline Send an Email to Hemonu Search for Posts by Hemonu Add Hemonu to your Buddy List
nitroman
Eroberer


Registration Date: 30.04.2004
Posts: 69

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

hi, da hab ich vor kurzem auch dran gebrütet, bei mir ging es erst als ich das nach dem xbmc howo.... eingetragen hatte.

code:
1:
2:
3:
4:
5:
6:
7:
8:
NEXT STEP

# sudo nano /etc/modprobe.d/alsa-base

and add this line to the end:

options snd-hda-intel model=6stack-dig



zusätzlich musste ich noch dies in die asound.conf eintragen:


code:
1:
2:
3:
4:
pcm.hdmi  { 
type hw card 0
device 3
}


dann hatte ich den ton über hdmi!

xbmc muss ich als root starten, sonst hab ich bei avis keinen ton. die menu sounds funktionieren aber... seltsam..

i

__________________
VDR HW : ASUS AT3N7a-I, 1*1GB RAM
VDR SW : yavdr 0.1.1 up2date

uuuund ne gute alte dbox2!! <-verkauft! ;-)
25.02.2009 09:50 nitroman is offline Send an Email to nitroman Search for Posts by nitroman Add nitroman to your Buddy List
Vomex Vomex is a male
Mitglied


Registration Date: 22.04.2006
Posts: 31
Herkunft: BaWü

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Hallo,

du hast eine Steckkarte, keine onboard-Grafik, richtig? Ich habe ebenfalls eine 8400GS (von Gigabyte). Mit einem Verbindungskabel vom SPDIF-Out des Mainboards zum SPDIF-In der Graka und aktuellen NVIDIA-Treibern kann ich mp3s sauber über HDMI auf die TV-Lautsprecher bringen. VDR-Ton ist leider zerhackt, da habe ich wohl noch nicht die richtigen Einstellungen gefunden. Ich musste als Ausgabedevice "hw:0,1" eintragen und im Mixer "iec958" unmuten.

Gruß Vomex

__________________
Antec Fusion Remote LCD, Asus A8N-VM CSM, Athlon64 3700, 1024MB, 2x Terratec Cinergy 1200 DVB-C, x-vdr
25.02.2009 09:59 Vomex is offline Send an Email to Vomex Search for Posts by Vomex Add Vomex to your Buddy List
C-3PO C-3PO is a male
Fürst


images/avatars/avatar-2553.jpg

Registration Date: 04.12.2005
Posts: 2,800
Herkunft: Schwabenländle

Thread Starter Thread Started by C-3PO
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Hier die Ausgabe von aplay -l:


code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
vdr02 ~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
vdr02 ~ #


__________________
Gen2VDR V3 Beta 6


Mainboard: Zotac IONITX-F-E
DVB: DuoFlex S2 miniPCIe
RAM: 2x 2 GB
System HDD: 32 GB Patriot Warp 2,5" SSD-SATA
Video HDD: WD Caviar Green, 2 TB
DVD: NEC Optiarc AD-7670S
LCD: Linux4Media l4m132c
IR: atric-Einschalter v5 ; Harmony 885

25.02.2009 10:01 C-3PO is offline Send an Email to C-3PO Search for Posts by C-3PO Add C-3PO to your Buddy List Add C-3PO to your Contact List
C-3PO C-3PO is a male
Fürst


images/avatars/avatar-2553.jpg

Registration Date: 04.12.2005
Posts: 2,800
Herkunft: Schwabenländle

Thread Starter Thread Started by C-3PO
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

@ nitroman ,

eine asound.conf gibt es auf meinem System nicht. unglücklich

@Vomex,

Nvidia Treiber ist Version: 180.29

__________________
Gen2VDR V3 Beta 6


Mainboard: Zotac IONITX-F-E
DVB: DuoFlex S2 miniPCIe
RAM: 2x 2 GB
System HDD: 32 GB Patriot Warp 2,5" SSD-SATA
Video HDD: WD Caviar Green, 2 TB
DVD: NEC Optiarc AD-7670S
LCD: Linux4Media l4m132c
IR: atric-Einschalter v5 ; Harmony 885

25.02.2009 10:09 C-3PO is offline Send an Email to C-3PO Search for Posts by C-3PO Add C-3PO to your Buddy List Add C-3PO to your Contact List
Lou Lou is a male
Haudegen


Registration Date: 01.05.2006
Posts: 716

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

quote:
Original von C-3PO
eine asound.conf gibt es auf meinem System nicht.

dann erzeug eine - sie wird im Normalfall nicht mehr benötigt, deswegen fehlt sie in den neueren Alsa Versionen.

Mach zuerst bei der Wiedergabe weiter - kleines Beispiel von mir:

code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
~$ aplay -l
**** Liste von PLAYBACK Geräten ****
Karte 0: SB [HDA ATI SB], Gerät 0: ALC888 Analog [ALC888 Analog]
  Untergeordnete Geräte: 1/1
  Untergeordnetes Gerät '0: subdevice #0
Karte 0: SB [HDA ATI SB], Gerät 1: ALC888 Digital [ALC888 Digital]
  Untergeordnete Geräte: 1/1
  Untergeordnetes Gerät '0: subdevice #0
Karte 1: HDMI [HDA ATI HDMI], Gerät 3: ATI HDMI [ATI HDMI]
  Untergeordnete Geräte: 1/1
  Untergeordnetes Gerät '0: subdevice #0

Mein HDMI Audio Device ist also Karte 1 an Gerät 3, jetzt teste ich den mit nem Audiofile:

code:
1:
aplay -Dplughw:1,3 -fcd testfile.wav

Wenn du jetzt Sound hast sei glücklich, wenn nicht baust du die neuen stable Treiber von Alsa neu - Skript für Ubuntu gibt es hier

Danach die /etc/asound.conf mit dem HDMI Audio Device erzeugen, für mich lautet die so:
code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
pcm.hdmi  { 
        type hw
        card 1
        device 3
}

ctl.hdmi {
        type hw
}

Jetz noch ein letzter Blick in deine ~/.xine/config_xineliboutput werfen:

cat ~/.xine/config_xineliboutput
code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
# Gerät für Monoausgabe
# string, default: default
audio.device.alsa_default_device:hdmi

# Gerät für Stereoausgabe
# string, default: plug:front:default
audio.device.alsa_front_device:hdmi

# ALSA Mixergerät
# string, default: PCM
#audio.device.alsa_mixer_name:PCM

# Lautsprecherplazierung
# { Mono 1.0  Stereo 2.0  Headphones 2.0  Stereo 2.1  Surround 3.0  Surround 4.0  Surround 4.1  Surround 5.0  Surround 5.1  Surround 6.0  Surround 6.1  Surround 7.1  Pass Through }, default: 1
audio.output.speaker_arrangement: Stereo 2.0

fertig!

mit der asound.conf kannst du mehrere Soundprofile erstellen, zB eins für dein Soundsystem und eins nur für deine LCD-Lautsprecher. Dann kannst du das Signal sogar durchschlaufen vom Tv zum Soundsystem. Wie das geht hat RHS schon mal hier drüben erklärt.

vdr-sxfe starte ich mit Parameter "--audio=alsa:hw:1:3"

Noch ein letzter wichtiger Link: http://alsa.opensrc.org/.asoundrc <- erklärt kurz und bündig wie man Sound Profile erstellt. Die .asoundrc ist die lokale Variante im Homeverzeichnis des jeweiligen Users. Sollen die Settings systemweit gelten gehören sie in die /etc/asound.conf

Edit: war noch was falsch in der asound.conf - die ctl Einträge sollten nicht fehlen, sorry...

This post has been edited 1 time(s), it was last edited by Lou: 25.02.2009 21:10.

25.02.2009 20:37 Lou is offline Search for Posts by Lou Add Lou to your Buddy List
I30R6 I30R6 is a male
Freiherr


images/avatars/avatar-2127.jpg

Registration Date: 21.12.2004
Posts: 1,587
Herkunft: Ruhrpott
Berufung: Auf-Suche-Hinweiser

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Nabend,

kann es sein dass es hier eventuell nen Denkfehler gibt ?

C3PO hat ne Nvidia Karte die KEINEN seperaten Audiochip besitzen sondern das SPDIF wird vom Mainboard/Soundkarte durchgeschliffen.
ATI Karten haben nen seperaten Audiochip.

Normal müsste Ton geben wenn der LCD/Plasma das Format erkennt/versteht.

Ich bin gerade selber am testen. (siehe signatur)
Wenn ich Stereo höre dann habe ich 1A Ton über HDMI an LCD . Bei DD allerdings am LCD nur knacksen aber am AV Receiver entsprechend DD 2.1/5.1.

Bei mir half in der setup.conf
code:
1:
2:
3:
4:
xineliboutput.Audio.Port = iec958
xineliboutput.Audio.Speakers = Pass Through


Ich habe Soundkarte on Board.


I30R6

__________________
VDR
Hardware : GA-EP35-DS3L, C2D E6300 , 3GB DDR2 , MSI 9500GT, 80GB System & 500GB Video,
Mystique-CaBix C2&Ci,TT Budget C-1501 X10,GCG-H20L
Software : Debian Lenny 5.0, Kernel 2.6.33, vdr 1.7.14 &ExtP-NG ,vdpau
PlugIns : von A - Z

25.02.2009 21:01 I30R6 is offline Send an Email to I30R6 Homepage of I30R6 Search for Posts by I30R6 Add I30R6 to your Buddy List Add I30R6 to your Contact List
Lou Lou is a male
Haudegen


Registration Date: 01.05.2006
Posts: 716

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

möglich, ich hab's über ein Alsa Soundprofil gelöst, hab ebenfalls Audio Onboard - HDMI. Beide Varianten funktionieren offensichtlich, wenn deine grad so läuft: wunderbar.
25.02.2009 21:14 Lou is offline Search for Posts by Lou Add Lou to your Buddy List
Hemonu Hemonu is a male
Doppel-Ass


Registration Date: 03.02.2004
Posts: 118

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

quote:
Original von I30R6
Wenn ich Stereo höre dann habe ich 1A Ton über HDMI an LCD . Bei DD allerdings am LCD nur knacksen aber am AV Receiver entsprechend DD 2.1/5.1.
I30R6


Die Fernseher können in der Regel nur Stereo 48k, 16 Bit dekodieren. Mit DD oder DTS könne die nichts anfangen

hemonu

__________________
Don't Panic !!!

Server: K9N Neo-F, Sempron, 1xFF, 2xNova, UHF Modulator zur Hauseinspeisung, Debian Etch, e-tobi VDR 1.6
Client 1: Asus M2NPV-VM, Nvidia 9500GT, Nova HD-S2, Ubuntu 9.04, e-tobi/Hanno VDR 1.6/1.7.8 + vdpau-test, SAMSUNG LE26R32 via HDMI
Client 2: ACER Revo 3600, TT CT-3650 CI, Debian Lenny, e-tobi VDR 1.6/1.7.11 + vdpau, Panasonic TH-42PZ85E via HDMI

26.02.2009 07:32 Hemonu is offline Send an Email to Hemonu Search for Posts by Hemonu Add Hemonu to your Buddy List
Lou Lou is a male
Haudegen


Registration Date: 01.05.2006
Posts: 716

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

@hemonu: also wirst du es doch über Soundprofile lösen müssen, um alle Uebertragunsgarten abdecken zu können. Du brauchst letzendlich ein Profil zum handling von DD/DS und eines für normalen Stereoton. Oben steht bei mir auch nur das Beispiel für Stereoton. Ich empfange im Moment auch keine DD/DS Sender, deswegen stört es mich nicht.
26.02.2009 08:41 Lou is offline Search for Posts by Lou Add Lou to your Buddy List
C-3PO C-3PO is a male
Fürst


images/avatars/avatar-2553.jpg

Registration Date: 04.12.2005
Posts: 2,800
Herkunft: Schwabenländle

Thread Starter Thread Started by C-3PO
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Danke erstmal für die vielen aufschlußreichen Antworten.

quote:
C3PO hat ne Nvidia Karte die KEINEN seperaten Audiochip besitzen sondern das SPDIF wird vom Mainboard/Soundkarte durchgeschliffen.
ATI Karten haben nen seperaten Audiochip.


Genau so ist es.

Mich interesiert in erster Linie mal überhaupt einen Ton über HDMI ausgeben zu können (z.B. Systemklänge), bevor ich mich mit xine, bzw. xineliboutput befasse.

Im Moment kommt da nur ein "Krachen und Knacksen" schiel

__________________
Gen2VDR V3 Beta 6


Mainboard: Zotac IONITX-F-E
DVB: DuoFlex S2 miniPCIe
RAM: 2x 2 GB
System HDD: 32 GB Patriot Warp 2,5" SSD-SATA
Video HDD: WD Caviar Green, 2 TB
DVD: NEC Optiarc AD-7670S
LCD: Linux4Media l4m132c
IR: atric-Einschalter v5 ; Harmony 885

26.02.2009 12:51 C-3PO is offline Send an Email to C-3PO Search for Posts by C-3PO Add C-3PO to your Buddy List Add C-3PO to your Contact List
Vomex Vomex is a male
Mitglied


Registration Date: 22.04.2006
Posts: 31
Herkunft: BaWü

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Kann man denn Mehrkanalton irgendwie runtercodieren auf Stereo? Wie oben erwähnt, mp3 abspielen geht, VDR macht komische Geräusche. Auch bei Sendern, die nur normales Stereo senden.

__________________
Antec Fusion Remote LCD, Asus A8N-VM CSM, Athlon64 3700, 1024MB, 2x Terratec Cinergy 1200 DVB-C, x-vdr
26.02.2009 12:51 Vomex is offline Send an Email to Vomex Search for Posts by Vomex Add Vomex to your Buddy List
Lou Lou is a male
Haudegen


Registration Date: 01.05.2006
Posts: 716

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

@Vomex:

geht via ~/.xine/config_xineliboutput:

code:
1:
2:
3:
# Heruntermischen zu Zweikanal Stereo Raumklang
# bool, default: 0
audio.a52.surround_downmix:1


übrigens: wer KDE4 einsetzt kann sich die asound.conf Einträge sparen: HDMI läuft sobald man den Soundserver auf HDMI umstellt und sich den Device dort merkt - die Bezeichnung ist leicht anders als bei aplay -l. Bei mir ist sie "hw:3,1" - wenn ich das beim Aufruf von vdr-sxfe mitgebe (--audio=alsa:hw:3,1) wird der Soundserver selbst die Ausgabe an den HDMI Device lenken. Die asound.conf wird überflüssig.

This post has been edited 1 time(s), it was last edited by Lou: 26.02.2009 15:28.

26.02.2009 15:26 Lou is offline Search for Posts by Lou Add Lou to your Buddy List
Vomex Vomex is a male
Mitglied


Registration Date: 22.04.2006
Posts: 31
Herkunft: BaWü

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

code:
1:
2:
3:
# Heruntermischen zu Zweikanal Stereo Raumklang
# bool, default: 0
audio.a52.surround_downmix:1


Hab ich drin, bringt leider nix böse

__________________
Antec Fusion Remote LCD, Asus A8N-VM CSM, Athlon64 3700, 1024MB, 2x Terratec Cinergy 1200 DVB-C, x-vdr
26.02.2009 16:45 Vomex is offline Send an Email to Vomex Search for Posts by Vomex Add Vomex to your Buddy List
Lou Lou is a male
Haudegen


Registration Date: 01.05.2006
Posts: 716

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

quote:
Original von C-3PO
Mich interesiert in erster Linie mal überhaupt einen Ton über HDMI ausgeben zu können (z.B. Systemklänge), bevor ich mich mit xine, bzw. xineliboutput befasse.

was ist denn wenn du den SPDIF Ausgang des Boards direkt mit dem Tv/ der Surround Analge verbindest? Setzt ein digitales Coaxkabel veraus - hast du sowas?

Und dann die Sound Tests mit aplay -l durchlaufen lassen, wie ich oben beschrieben habe. Nur so findest du heraus, ob deine installierten Alsa Treiber aktuell genug sind. Bei mir war der HDMI Out erst ab Version 1.0.17 lauffähig, aktuelle stable Treiber von Alsa sind schon bei 1.0.19 - evtl musst du die Treiber updaten.
26.02.2009 17:35 Lou is offline Search for Posts by Lou Add Lou to your Buddy List
C-3PO C-3PO is a male
Fürst


images/avatars/avatar-2553.jpg

Registration Date: 04.12.2005
Posts: 2,800
Herkunft: Schwabenländle

Thread Starter Thread Started by C-3PO
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

@ Lou

1.] Was ist "ein digitales Coaxkabel " ??

2.] Ich bin mir nicht sicher, ob das was mit den alsa Treibern zu tun hat, denn die Graka soll ja nur das das SPDIF Signal durchschleifen. Ich habe ja, wie I30R6 schon gesagt hat, keinen Audio Chip auf der Graka und SPDIF scheint ja vorhanden zu sein:

code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
vdr02 ~ # aplay -L
default:CARD=Intel
    HDA Intel, AD198x Analog
    Default Audio Device
front:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    Front speakers
surround40:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
    HDA Intel, AD198x Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
    HDA Intel, AD198x Digital
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=Intel,DEV=0
    HDA Intel
    HDMI Audio Output
null
    Discard all samples (playback) or generate zero samples (capture)
vdr02 ~ #



Deshalb nochmal die Frage:

Wie kann bekomme ich die Soundausgabe auf S/PDIF, bzw. was und wo muss da eingestellt werden?

__________________
Gen2VDR V3 Beta 6


Mainboard: Zotac IONITX-F-E
DVB: DuoFlex S2 miniPCIe
RAM: 2x 2 GB
System HDD: 32 GB Patriot Warp 2,5" SSD-SATA
Video HDD: WD Caviar Green, 2 TB
DVD: NEC Optiarc AD-7670S
LCD: Linux4Media l4m132c
IR: atric-Einschalter v5 ; Harmony 885

This post has been edited 1 time(s), it was last edited by C-3PO: 26.02.2009 17:49.

26.02.2009 17:48 C-3PO is offline Send an Email to C-3PO Search for Posts by C-3PO Add C-3PO to your Buddy List Add C-3PO to your Contact List
Vomex Vomex is a male
Mitglied


Registration Date: 22.04.2006
Posts: 31
Herkunft: BaWü

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Installier dir mal audacious (ehemals xmms). In den Soundeinstellungen kannst du praktisch alle Ausgänge durchprobieren.

__________________
Antec Fusion Remote LCD, Asus A8N-VM CSM, Athlon64 3700, 1024MB, 2x Terratec Cinergy 1200 DVB-C, x-vdr
26.02.2009 18:02 Vomex is offline Send an Email to Vomex Search for Posts by Vomex Add Vomex to your Buddy List
pluto
Jungspund


Registration Date: 18.09.2006
Posts: 22

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

C-3PO,

ich habe die gleiche Konstellation wie Du:

code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
#>aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC882 Analog [ALC882 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC882 Digital [ALC882 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


und folgendes in meiner $HOME/.asoundrc oder halt /etc/asound.conf

code:
1:
2:
3:
4:
5:
6:
7:
pcm.!default {
        type hw
	card 0
	device 1
}


Mit diesen Einstellungen funktioniert es über HDMI. Falls nicht, überprüfe Dein Kabel. Ich hatte meins zuerst verpolt.

Gruß
pluto
26.02.2009 18:49 pluto is offline Send an Email to pluto Search for Posts by pluto Add pluto to your Buddy List
Pages (2): [1] 2 next » Tree Structure | Board Structure
Jump to:
Post New Thread Post Reply
VDR Portal » VDR Hardware » Allgemein » Audio via HDMI Ausgang der Grafikkarte?

www.vdr-portal.de VDR Portal © 2002-2006 by genka
Forum Software: Burning Board 2.3.4, Developed by WoltLab GmbH